Lenoxx BTR862 Instruction manual

Outdoor Bluetooth speaker with

PLL FM radio and USB/SD

BTR862

INSTRUCTION MANUAL

IMPORTANT SAFETY INSTRUCTIONS:

1. Read the instructions. All user guidelines must be read before starting the device.

2. Keep the instructions for future use.

3. Attention, usage and security guidelines must be respected.

4. The device must not be used near water or be put in contact with moisture.

5. Make sure has no liquid is spilled on device and device openings.

6. Move device carefully, avoid shocks.

7. Do not block the breakdown of the device outputs.

8. Do not place the device near from a heat source (e.g. radiator). Do not expose it to the Sun.

9. Plug the device as indicated on this instruction manual.

10. This device has a connection with overload protection (security device) decision-making. If the replacement of decision-making is required, please you send has an experienced or the device manufacturer technician.

11. For cleaning the device, please follow the recommendations of the notice.

12. The power cord should be unplugged in the case of a long period of non use.

13. Device shall be repaired by a qualified person when: a. the power cord is damaged, b. objects have fallen into the apparatus or a liquid has been spilled into device, c. device was exposed to water, d. device does not work correctly without notable exterior change,

14. The user shall not try to maintain device beyond that which is described in this information form. The guarantee would invalid.

14. Unpack all parts and remove protective material.

15. Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.

16. Do not cover any vents and make sure that there is a space of several centimeters around the unit for ventilation.

17. The apparatus shall not be exposed to dripping or splashing of liquids and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

18. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.

19. No naked flame sources, such as lighted candles, should be placed on the apparatus.

20. The mains plug is used as the disconnect device, the disconnect device shall remain readily operable.

LOCATION OF CONTROLS

3) On Off button

4) Repeat/random play button down button

6) Tune/Skip button

7) SD card slot

10) Pre up/+10/Pro button

11) Volume down

12) Bluetooth LED indicator

13) Volume up button

14) Play/pause button

15) Stop button

16) Battery compartment

17) FM wire antenna

18) DC in jack

Caution:

Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

This unit should not be adjusted or repaired by anyone except qualified service personnel.

Precautions for use

Installation



Unpack all parts and remove protective material.

 Do not connect the unit to the mains before checking the main voltage and before all other connections have been made.



Do not cover any vents and make sure that there is a space of several centimeters around the unit for ventilation.

AC connection

1. Connect the DC plug (19) to the DC jack (18) of the main unit, then, connect the AC/DC adaptor (20) to the AC outlet.

2. Turn on the unit by On/Off (3), if the LCD display (1) is on with backlighting, it means the power supply is normal.

Now your system is ready to play the music.

DC connection

For DC operation, please insert 8 pcs size C (UM-2) battery to the battery compartment (16) as the indication in battery compartment and remove the DC plug (19) from the DC jack (18).

Listening to radio

Manual tuning

1. Turn on unit by On/Off button (3) & then press the Function button (2) to select “ FM ” mode.

2. Press the Tune / Skip up “ or down ” (6/5) button to change the received frequency in order to reach your desired FM channel

3. Adjust volume up/down button (11/13) to the desired volume level.

Auto tuning

1. Press Function button (2) to select “ Tuner ” mode.

2. Press and hold the Tuning / Skip up “ or down ” button (6/5), the unit will start searching until reach receive a

FM channel, repeat this step until the desired radio station is being reached.

3. Adjust volume up/down button (11/13) to the desired volume level.

Hints for best reception:-

The receiver has a build-in FM rod antenna (17) on top of the unit. Extend it as long as possible to get best reception.

Preset stations

You can store up to total of 20 FM radio stations in the memory.

1. Set to FM mode by “Function” (2).

2. Turn to the desired FM station according the above “Listening Radio” instruction.

3. Press and hold “ Pre-up/+10/Pro ” button (10) few second to active program state. Display will flash with “ P 01 “.

1

4. Press Tuning / Skip up “ or down ” button (6/5), to select the desired station memory position for storage.

5. Press Pre-up/+10/Pro ” button (10) once again to confirm the setting.

6. Repeat step 2 to 5 to store other stations.

7. Now you can select the presets stations in order by pressing the “ Pre-up/+10/Pro” button (10).

 The pre-set memories will be cancelled completely if dis-connecting the main power supply. You are recommended to switch the system into standby mode for convenience usage.

 There are 3 seconds for program state, after 3 sec. This state would resume to normal tuner mode automatically.



You can overwrite a present station by storing another frequency in its place.

Playback of MP3 song via USB storage media or memory card

Connecting

The system is able to decode and playback MP3 files stored in the memory media with USB connecting port or SD/MMC card.

1. Set the system at off mode first or other function except USB/SD mode.

2. Open the USB socket cover then plug-in the USB pen-drive with the face in & make sure it going into completely or open the SD slot cover then insert the memory card in the direction of the arrow as shown in the cover of the memory card slot. Insert straight without bending.

 Connecting the USB pen drive upside down or backwards could damage the audio system or the storage media (USB thumb drive). Check to be sure the direction is correct before connection.

3. Turn on the unit again by On/Off button (3) and press Function button (2) to

“ USB ” or “ SD ” mode. The system will start reading the storage media automatically after connecting, and LCD display (1) will show the running time of MP3 files.

 Play / pause mode

Play/Pause button (14) is pressed during playback, system go to pause mode and the playing time will start flashing at the LCD display (1). Press again to resume normal playback.

 Stop mode

LCD display (4).

 Skip mode (skip up /skip down )

1. During play or pause mode, if skip up button (5) is pressed it will go to next track and display the track no. and will change to play mode.

2. During play or pause mode, if Skip down mode.

button (6) is pressed, it will go to the previous track and change to play

 +10 tracks

1. Press “Pre-up/+10/Pro” button (10) to skip 10 tracks forward to your favorite track for more convenience.

 Repeat/Random mode

Press the “ Rep/Ran “ button (4) during playback to select repeat/ random or intro function, a single track, random and intro can be played as follow:-

(1) Random (2) Repeat 1 (3) Intro (4) Off mode

Play mode

Indicator

on LCD display

Repeat track

Intro INTRO

 Repeat play

You can listen to the desired tracks by this function.

 Random play

You can listen to all the tracks in a random order by this function.

 Intro play

You can listen the beginning (10 seconds) of each file by this function & saving your time to search the desire song

2

 Repeat all

As this unit repeat all mode was defaulted, if any play mode did not selected, MP3 playback will continuously.

Remark

- The system can detect and read the files under MP3 format only at USB mode but no other music file format.

- If connecting the system to an MP3 player via the USB socket, due to variances in MP3 encoding format, some MP3 players may not be able to play via the USB socket. This is not a malfunction of the system.

- USB port does not support connection with USB extension cable and is not designed for communication with computer directly

Removing of USB pen drive

To remove the USB pen drive, turn off the power or switch the function mode to either Aux or FM first. For USB port – un-plug it by pulling out from the USB socket directly.

Remark:-

MP3 track format requirement:-

- Bit rate : 32 kbps~320kbps, sampling rate : 32kHz, 44.1kHz and 48 kHz decodable

- The performance of playing MP3 disc is varied from the quality of recording disc and the method of recording.

Furthermore, the searching lead-time for MP3-CD is longer than normal CD due to difference format.

Bluetooth connecting and Playback

1. Select the Main Function selector (2) to “ bt ” mode.

2. The Bluetooth LED indicator (12) will flashing, it means the Bluetooth in non connection / searching mode.

3. Switch on the Bluetooth feature of your Bluetooth device (such as mobile phone) and select “ Goldsound ” Bluetooth equipment to connecting.

4. Once the connecting has finished and has connected successfully, the Bluetooth LED (12) will change to light up.

5. Start to playback your Bluetooth device and enjoy the music by the main unit.

Aux-in connection

Connect another audio device, e.g. (portable) CD player, MP3 player, (portable) cassette player, iPod, etc. to this system via a cord with 3.5mm diameter jack plugs (not supplied). Connect one end of this cord to the headphone jack of the external device and the other end to the aux-in jack (9) at the side of the unit. Then press Function button (2) to “ AUX ” mode. Start to playback your external device to enjoy your music.

3