Digitus 3.5" External Enclosure COMBO
USER’S MANUAL
3.5” Type
USB 2.0+1394 HARD DISK
BOX ENCLOSURE
Index
Page
Introduction………………………………………………………………….
Features &Specification……………………………………………………
Requirements……………………..….…………………………………….
Package contents…………………..……………….……………………..
Hardware Installation…..….…………………………………………………
Software Installation…...…………….……………….………………………
2
2
2
3
4
7
This Product is achieve the USB 2.0 High-Speed, must be plugged in to USB 2.0 Host Port. If this
product is plugged into the USB 1.1 Host port, this product will only have USB 1.1 Full-Speed.
- Page 1 -
Introduction:
This is a 3.5” 1394+USB2.0 combo hard disk enclosure,it will offer an easy to carry
Interface solution for user to add more storage & portable with PC.
Features & Specification:
1. USB INTERFACE:
▲ Interface standard: USB Ver.2.0 /IEEE1394A
▲ USB connectors/cable: 1 USB B type female connector and 1 USB A TO B Cable
▲ Data transfer rate: USB2.0:High Speed at 480Mb/sec and Full speed at 12Mb/sec
▲Power LED : 1 LED for Power in.(Bus or Self power)
▲Activity LED: 1 LED for Hard Disk READ/WRITE
▲For one 3.5 inch Hard Disk only
▲EMI : CE & FCC
2. IEEE1394A INTERFACE
Data Transfer Rate : 100,200,400 (Mb/S).
IEEE Standard :IEEE 1394, PI394a Compliant.
Connectors : 2PORT x 6 to 6pin, IEEE 1394 Standard.
Separate cable bias (TPBIAS) and driver termination voltages supply for each
port.
▲ Truly Plug & Play automatic system configuration.
▲ Ideal for backup , storage Data files .
▲
▲
▲
▲
Requirements:
IBM PC/AT Compatible or Apple iMac.G4
USB 2.0 Host card or USB 2.0 HUB device/IEEE1394 PCI CARD
Windows 2000, Windows XP, Windows ME or Windows 98SE operating
system /Mac OS 10.X
- Page 2 -
Packing contents:
Item
3.5'' HDD BOX ENCLUSURE
USB
A TO B CABLE/ 1394 6PIN TO 6PIN CABLE
Screw ( AFFIX HDD) SET
POWER ADAPTER (12V)
CD DRIVER (WITH MANUAL)
- Page 3 -
Chapter 1
Hardware Installation:
1. Open the combo
hard disk enclosure
2. Insert & assemble 3.5”hard disk :please advirt aspect of cable as
below view:
- Page 4 -
3. Please screwing HDD together with housing for two
Side of HDD.
- Page 5 -
4. Assemble the
top case as below
5.Close the case as below view:
- Page 6 -
Chapter 2
Software Installation:
Supported OS
Windows XP, Windows 2000, Windows ME, Windows 98SE (Windows
XP and Windows ME&Win2000 works without driver) and Mac 10.x . The
drivers supplied with this distribution are for Win98SE only.
Windows XP and Windows ME and windows 2000
You do not need to install any driver if your computer’s O.S is Windows
XP or Windows ME and Win2000 since the two O.S come with the supporting
driver. Turn On your computer, system will auto detect and attempt load driver
on “and appear new disk icon with “My Computer” icon on pc desktop
Windows 98SE
1.
2.
3.
4.
INSTALLATIONAL:
Please insert CD into the CD-ROM
Please enter “My computer” and double click CD-ROM icon
Please double click “driver” folder
Please double click “ setup.exe” file as below:
- Page 7 -
5. Please click ” Next” as below:
6. Please select “I accept the terms of the licenese agreement”and click
“Next”
- Page 8 -
7. Please select “Complete” and click “Next”
8. Please click “Install”
for start to install driver
- Page 9 -
9. When the drvier is install final,please click “Yes” to reatart PC.
10.Please click “settings”then select “Removable”item in
“device manager” for system and click “ok”
- Page 10 -
11. Windows will ask you to restart PC ,please click “yes”
12. “My computer” will appear “Removable Disk”,please
format HDD and start to use it.
- Page 11 -
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement