IHSE Press Release-Draco vario Repeater family

IHSE Press Release-Draco vario Repeater family
Press Release
Maybachstrasse 11
88094 Oberteuringen
+49 7546 9248-0
+49 7546 9248-48
IHSE simplifies the extension and format conversion of digital
Oberteuringen, April 17, 2014 – IHSE, a worldwide leading manufacturer of advanced
KVM products for the switching and extension of computer signals, today announces
the release of the new, highly-flexible Draco vario Repeater family. The new product
range is highly suitable for the bridging of Draco tera switches in case of matrix
KVM extenders are used for the
extension of computer signals up to
140 meters with Cat X cable and 10
km with single-mode fiber optic cable.
The installation of repeaters at
intervals within a signal path multiplies
the distance the signal can be
transmitted to.
The new Draco vario Repeater family
between Cat X and fiber cables.
Signals available on a Cat X network
may be converted to fiber for
transmission and converted back to
Cat X at the receiver (or vice-versa). This is useful in bridging buildings with copper-based
networks that are located some distance apart. High-quality signal processing and integral
amplification ensures no signal degradation or transmission artifacts. Both device options can
be deployed between extenders or matrices and between extender and matrix.
Cross repeater allows fallback scenario
The cross repeater works with Draco vario extenders with the redundant option. The cross
repeater is installed in a secondary path to provide backup to the primary KVM matrix switch.
In the event of failure, signals are transmitted from the transmitter to the receiver through the
cross repeater, bypassing the matrix.
Board of Directors: Heiner Esseln, Dr. Enno Littmann ▪ Place of performance & court: Überlingen ▪ District court: Freiburg HRB 580617
Page 1 of 2
The Draco vario Repeater family features bidirectional data ports: Cat X and fiber ports are
individually configurable as inputs or outputs. No additional configuration is required. Singleand dual-repeater board versions are available for installation in Draco vario frame
About IHSE
IHSE is a leading developer and manufacturer of advanced KVM devices in global demand.
KVM stands for Keyboard, Video, Mouse. KVM technology allows the switching, extension
and conversion of these three primary computer signals and many else, e.g. DVI, HDMI,
digital audio or USB. At their headquarters near Lake Constance, Germany, IHSE develops
and manufactures switches for operating and switching between computers and consoles, as
well as extenders for visually lossless signal transmission, with 30 years of experience.
IHSE products have been certificated for outstanding manufacturing quality, operability,
resilience and enormous transfer speeds. Many renowned institutions across vertical sectors,
including Broadcast, Post Production, Banking, Healthcare, Maritime, Air Traffic Control and
Government rely on KVM solutions made by IHSE, Germany. For further information please
refer to www.ihse.com.
Press contact
Stefan Ruppert
Maybachstrasse 11
88094 Oberteuringen/Germany
Email: stefan.ruppert@ihse.de
Phone: +49 7546 9248-59
Web: www.ihse.de
Board of Directors: Heiner Esseln, Dr. Enno Littmann ▪ Place of performance & court: Überlingen ▪ District court: Freiburg HRB 580617
Page 2 of 2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF