GPV 950/950 L
GPV 950/950 L
High Output Distribution
Amplifier with active
return path
GPV 950 / 950 L are high output Distribution Amplifiers
for use in CATV distribution networks in multi-dwelling
premises primarily. Switching of the basic gains enables
to configure the amplifiers as line extender or as cascade
amplifier in trunk position. All functional parts and setting
elements are implemented on the printed board. Thus
you do not need external accessories for configuration
and operation of the amplifier in generally.
Cable
operator
approved
Type class D (4.4)
ALL FEATURES AT GLANCE
ORDER INFORMATION
n One-board technology:
all functionalities on one
board implemented
High Output Distribution Amplifier
n Downstream: 85...1006 MHz by
max. output level 113 dBµV
TRIAX GPV 950
Order No.
323 170
TRIAX GPV 950 L, remote fed
Order No.
323 174
n Upstream: 5-65 MHz, max.
output 120 dBµV (high load
performance for DOCSIS 3.x)
n State of the art
1 GHz technology
n Excellent and stable amplifier characteristics n Low power consumption because of high efficient switching PSUs
n Basic gain selectable via
jumpers
n Return path mode
selectable: active /
passive / off n Integrated cablesimulator
n Extensive ESD and
surge
protection
50
V9
GP
n Rotary switches in 1 dB steps for
settings of attenuation and equalization
your ultimate connection
GPV 950/950 L
Rotary Switches
for readable, easy and reproducible settings of
attenuation and equalization in 1 dB steps
Versitile configuration options
for optimizing the gain setting by jumpers
Integrated Cable simulator
activating by plug of standard PAD (1…10 dB) in
Low distortion pre- and power stages
without degradation of signal quality by
switching the basic gains
High-quality F connectors
Reliable interface protects from ingress
noise.
Waterproof housing IP 65
Technical Data
Type
GPV 950 / GPV 950 L
Article number
323170 / 323174
RF Connectors (75 Ohm)
RF-Input/RP-Output/RP-Test connectors
F-female
Downstream
MHz
85-1006
Upstream
MHz
5-65
RP-Test connector input (bi-directional)
dB
-20
RP-Test connector output (uni-directional)
dB
-20
Gain @ 1006 MHz
dB
41/33
Operating conditions
Level control Input (Rotary switch, 1 dB steps)
dB
0-15
Equalizer Input (Rotary switch, 1 dB steps)
dB
0-15
Gain setting Interstage (Jumper)
dB
0/8
Slope Interstage (Jumper)
dB
0/3/7/10
Cable simulator (Pads, optional)
dB
1-10*
Gain @ 60 MHz, setting (Jumper)
dB
32/26
Level control Input (Jumper)
dB
0/4/8/12
Gain, Downstram
Power supply (50-60 Hz)
< 15
Operating temperature
°C
-25-+55
ESD-/Surge protection
KV
Safety class, degree of protection
mm
kg
180x145x70
1,3
Standards
Level control Interstage (Rotary switch, 1 dB steps)
dB
0-15
dB
0/3/6/9
dB
± 1.0
Downstream
dB
6.0
Type class cable operator
Upstream
dB
5.0
KDG 1TS140 “full load”
Noise Figure (typical)
10/4
II / IP 65
Weight
Slope Interstage (Jumper)
Linearity
190-264 / 28-65**
W
Dimensions (W x H x D)
Gain, Upstream
5...65/87...1006 MHz
V
Power Requirements
Product standard/Safety/EMV
EN 60728-3 Class 2 /
EN 60728-11 /
EN 60065 /
EN 50083-2
RoHS 2002/95/EG conformity
ü
D 4.4
Return Loss @ 40 MHz, -1.5 dB/Octave, min. Cat B
Downstream, Upstream
dB
> 18
Max. Output Level Downstream
CSO (42 chan. 862 MHz) Slope 0/7 dB
dBµV
114/116
CTB (42 chan. 862 MHz) Slope 0/7 dB
dBµV
113/115
dBµV
120
Max. Output Level Upstream
16 QAM (KDG1TS140 - class D: full load
* Pad JXP-OT, 1-10 dB, optional available, e.g.
• 4 dB, JXP-OT4, Order No. 322204
• 7 dB, JXP-OT7, Order No. 322207
• 10 dB, JXP-OT10, Order No. 322210.
Further attenuation values by request.
** GPV 950 L: remote feeding via RF input
Misprints, errors and modifications excepted | 10-2014
Frequency range
Triax A/S
DK-8783 Hornsyld
+45 76 82 22 00 | triax@triax.dk | www.triax.com
your ultimate connection
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising