Pettersson M500 384 ultrasound microphone Quick Start Guide

Below you will find brief information for ultrasound microphone M500-384. The M500-384 USB Ultrasound Microphone enables you to make high-quality, full spectrum recordings of bat calls or other ultrasonic signals with a wide variety of computers/laptops/tablets/smartphones, using the sound recording software of your choice. The M500-384 uses standard sound device drivers and does not require installation of any custom drivers. The M500-384 comes in a small and durable aluminium enclosure. It utilizes the same electret microphone technology as the well-known D500X detector and can be used both in directional and omnidirectional modes (with or without the directional horn).

PDF Download
Document
Pettersson M500-384 Quick Start Guide | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • USB 2.0 interface
  • High sampling frequency (384 kHz)
  • 16-bit ADC resolution
  • Directional and omnidirectional modes
  • Compact and durable aluminium enclosure
  • Standard sound device drivers

Frequently asked questions

The M500-384 works with most operating systems, e.g. Windows, OS X, iOS, Linux and Android, and on most computer devices. Due to the large number of possible combinations, it is not possible to guarantee full functionality on all computers and operating systems, though.

The hardware and software used to record from the M500-384 must support recording at a sampling frequency of 384 kHz and a resolution of 16 bits. A USB 2 full-speed port (OTG/host enabled) with USB bus power (minimum 200 mA) is also required.

The M500-384 comes with a detachable directional horn. In order to obtain a more directional microphone characteristic as well as a higher on-axis sensitivity, the directional horn should be used. To remove the horn, pull the horn straight away from the microphone tip. When the horn is put back on the microphone tip, please hold the horn at the edge while pressing it onto the tip.
Preparing document for printing…
0%