59 SOU-1 | Twilight switch
59
SOU-1 | Twilight switch
EAN code
SOU-1/230 V + SKS: 8595188121002
SOU-1/UNI + SKS: 8595188121019
Photosensor SKS: 8594030337288
SKS
SOU-1
Technical parameters
Voltage range:
A1 - A2
UNI
Supply terminals:
Voltage range:
Description
Supply voltage terminals
AC 0.7 - 3 VA / DC 0.5 - 1.7 W
230
Burden:
AC/DC 12 - 240 V (AC 50 - 60 Hz)
• Is used to control lights on the basis of ambient light intensity.
• Used for switching street illumination and garden lights, illumination
of advertisements, shop windows, etc.
• Level of ambient intensity is monitored by an external sensor and
output is switched according to set level on the device.
• Control input for additional control, e.g. time switch, preswitch etc.
• Level of illumination adjustable in two ranges:
1 - 100 lx and 100 - 50000 lx.
• Adjustable time delay to eliminate short term fluctuation in
illumination.
• External sensor IP44 suitable for mounting on the wall (cover and
holder of a sensor are a part of the package).
• Supply voltage AC 230 V or AC/DC 12 - 240 V.
• Output contact: 1x changeover/ SPDT 16 A.
• Red LED output indication.
• 1-MODULE, DIN rail mounting.
Power input (apparent/loss):
Supply voltage tolerance:
Supply indication:
Time delay:
Terminals for sensor
AC 230 V / 50 - 60 Hz
AC max. 12 VA / 1.8 W
-15 %; +10 %
Terminal of blocking input
Supply voltage indication
Output indication
Setting of level of illumination
Switch of test function TEST
green LED
0 - 2 min
Time delay setting:
potentiometer
Illumination rang 1):
1 - 100 lx
Illumination rang 2):
100 - 50000 lx
Fine setting of level of illumination
Setting time delay
Output
Number of contacts:
Current rating:
Breaking capacity:
Inrush current:
Switching voltage:
1x changeover / SPDT (AgSnO2)
Output contact
16 A / AC1
4000 VA / AC1, 384 W / DC
30 A / < 3 s
Connection
250 V AC1 / 24 V DC
L
Min. breaking capacity DC:
500 mW
N
Output indication:
red LED
A1
3x107
IN
Mechanical life:
Electrical life (AC1):
S A2
IN
0.7x105
Control
Power the control input:
0.8 - 530 mVA (UNI), 0.8 - 530 mVA (AC 230 V)
Load between S-A2:
Yes
Control. terminals:
A1-S
Glow tubes connetions:
Max. amount of glow lamps
connected to controlling
input:
Impulse length:
Reset time:
15 16 18
230 V - Yes / UNI - No
UNI - glow lamps cannot connected,
230 V - max. amount 20 pcs
(measured with glow lamp 0.68 mA / 230 V AC)
Description of DIP switch
150 ms
DIP 1 - LUX
100 - 50000 lx
Operating temperature:
-20 °C to +55 °C (-4 °F to 131 °F)
Storage temperature:
-30 °C to +70 °C (-22 °F to 158 °F)
Electrical strength:
4 kV (supply - output)
Operating position:
any
Protection degree:
ambient light
intensity
ON
Other information
Mounting:
Function
min. 25 ms / max. unlimited
LEVEL
1 - 100 lx
lx
Hysteresis
A1-A2
DIP 2 - TEST
ТЕSТ
ON
ТЕSТ ON
S
NORMAL
t
15-18
DIN rail EN 60715
IP 40 from front panel / IP 20 terminals
Symbol
Sensor cable length:
A1
max. 50 m (standard wire)
Overvoltage category:
III.
Pollution degree:
2
Max. cable size (mm2):
Weight of sensor SKS:
Dimensions:
Weight:
Standards:
18
IN
IN
solid wire max. 1x 2.5 or 2x 1.5/
with sleeve max. 1x 2.5 (AWG 12)
Dimensions of the sensor SKS:
16
66 x Ø 23.5 mm (2.6" x Ø 0.9")
20 g (0.7 oz.)
90 x 17.6 x 64 mm (3.5˝ x 0.7˝ x 2.5˝)
(UNI) - 75 g (2.6 oz.), (230) - 65 g (2.3 oz.)
EN 60255-6, EN 61010-1
S A2
15
t
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement