E-2000 FAMILY Datasheet

E-2000 FAMILY Datasheet
DIAMOND
Fiber Optic Components
CABLE ASSEMBLIES AND ADAPTERS
E-2000™ Family
SINGLE MODE PC/APC
MULTIMODE PC
PS, PSf, PM-PS, PSi, PSm, PSc, PM,
VIS/NIR
Thanks to its different technologies, mechanical and optical interfaces, the
E-2000™ fiber optic connector family can cover the most standard and customized requirements in response to the increasingly customer demands.
The family includes: simplex, compact and backplane connectors and
adapters, as well as a series of network accessories such as: attenuators,
hybrid adapters, transition adapters, terminators, reflectors and receptacles.
FEATURES AND BENEFITS INCLUDE
 Color-coding and mechanical keying to ensure correct matings.
 Spring-loaded protective cap for high power applications providing
increased safety protection
 Specially designed body to prevent endface damage during mating
 Modular designed mating adapters with metal protective shutters for
high power applications
 EtO sterilizable components with optional O-ring seals IP65-rated (for
E-2000™ Simplex and Compact) for safety, reliability, and quality in
biomedical markets and applications subject to special environmental
conditions.
 E-2000™ Simplex with non-magnetic components available
 Assemblies available with different plastic and metal flexible jacketing: Elastometer (Hytrel), PEEK (Victrex 450), PA (Nylon), PTFE (Teflon), Stainless steel.
E-2000™ Simplex
E-2000™ Compact
 Diamond composite ferrule (zirconia ceramic sleeve and titanium insert):
- Allows plastic deformation for our Active Core Alignment (A.C.A)
- Unique 0.1 dB Insertion Loss
- Custom drill sizes from 80μm to 800μm
- Superior Ultra polishing
- Custom ferrules for multi-fiber technology
- Ultra-low ferrule O.D. tolerances
AVAILABLE TECHNOLOGIES AND OPTICAL INTERFACES
PS optical interfaces: PS collimated, PSf free space, PM-PS, PSi Free
Standing, PSm Multimode, PSc collimator.
Polarization Maintaining (PM)
VIS/NIR for low wavelengths and small core fibers
Optical Line Identification OLID assemblies
E-2000™ FUSION for easy field termination of MM and SM fibers
E-2000™ Crimp & Cleave for field termination of 200/230 µm HCS-fiber
E-2000™ Backplane 2-6 channels
E-2000™ Interlock and Power Solution (PS)
E-2000™ Accessories and active modules
DIAMOND SA • Via dei Patrizi 5 • CH-6616 Losone - Switzerland
Tel. +41 91 785 45 45 • Fax +41 91 785 45 00 • e-mail [email protected]
the fiber meeting
www.diamond-fo.com
Specifications subject to change
without notice
BDD 1951622 10_16
E-2000™ Family
THE E-2000™ SIMPLEX
Constant innovation in the field of fiber optics has created demand for products with ever increasing performance
requirements. Diamond has responded to this challenge and expanded the E-2000™ connector system to address
these needs throughout all market segments.
The E-2000™ Simplex offers unparalleled 0.1 dB maximum insertion loss random mating, exceptional repeatability, while maintaining the already well established, superior features of the E-2000™ connector family.
STANDARDS
EN 86 275-801
EN 86 275-802
TIA/EIA 604-16
IEC 61 754-15
„Connector sets of assessed quality for optical fibers and cables - Type LSH universal“
„Connector sets of assessed quality for optical fibers and cables - Type LSH-HRL universal“
Fiber Optic Intermateability standard - Type
“Fiber optic connector interfaces – Part 15: Type LSH connector family”
AVAILABLE AS
Standard terminated connector, also for applications up to 6W (E-2000™ PS)
➢ Connector set (to be terminated with Diamond special equipment)
OPTICAL SPECIFICATIONS
MULTIMODE
0° PC
SINGLE MODE
0° PC
SINGLE MODE
8° APC
typ. 0.15 max 0.4 typ. 0.2 max 0.4
Insertion Loss (IL)
typ. 40
Return Loss (RL)
SINGLE MODE
UNITS TEST CONDITIONS
8° 0.1 dB
typ. 0.2 max 0.4
max 0.1
dB
IEC 61300-3-4; λ = 1300/1550nm
min 70*
min 85*
dB
IEC 61300-3-6; λ = 1300/1550nm
-
min 50
max ±0.1
Repeatability of IL
Service life
Storage temperature
dB
IEC 61300-2-2; λ = 1300/1550nm
1000 mate/demate cycles
-
According to field experience
-40/+90**
°C
* Measured with high precision reflectometer
** May be further limited by cable specifications
Simplex adapter with fixed flange
ENVIRONMENTAL CONDITIONS
MEASUREMENT / TEST
PARAMETERS
METHOD
Change of temperature (Reliability)
-40°C / +85°C / 1 h dwell / 500 cycles
IEC 61300-2-22
Low temperature
-51°C / 96 h
MIL-STD-810F
Dry heat (Reliability)
+85°C / 2'000 h
IEC 61300-2-18
Termal shock
-51°C / +71°C / 1 h dwell / 3 cycles
MIL-STD-810F
Low pressure, procedure II
4’572 m / 1 h
MIL-STD-810F
Low pressure, procedure III
2'438 m to 12’192 m / 60 s
MIL-STD-810F
Damp heat, cyclic
(Reliability)
+25°C / +55°C / 95% r.h. / 100 cycles
IEC 61300-2-46
Composite
temperature-humidity cycling
-10°C / +25°C / +65°C / 93% r.h. /
15 cycles
IEC 61300-2-21
Extended humidity (Reliability)
+85°C / 85% rh / 2’000 h
Telcordia GR-326-CORE
Salt mist
+35°C / 50 g/l / 96 h
IEC 61300-2-26
For firmly fixation
Versatile simplex adapter
MECHANICAL CONDITIONS
Tensile strength of coupling
mechanism
40 N / 2 min
IEC 61300-2-6
Cable retention
100 N / 2 min
IEC 61300-2-4
Proof at 0°
4.5 Kg - 6.8 Kg / 5 s
Telcordia
GR-326-CORE
Proof at 90°
2.3 Kg - 3.4 Kg / 5 s
Telcordia
GR-326-CORE
Static side load
1 N / 1 h on cable version
0.2 N / 5 min on fibre version
IEC 61300-2-42
Cable torsion
15 N / ±180° / 25 cycles
IEC 61300-2-5
Twist
1.35 Kg / ±1'800° / 10 cycles
Telcordia
GR-326-CORE
Vibration, sinusoidal
10 Hz - 55 Hz / 1.5 mm / 30 min
IEC 61300-2-1
IEC 61300-2-12
Impact (freefall)
1.5 m / 5 drops
Bending moment
10 N / 2 min
IEC 61300-2-7
Mating durability (Couplings)
500 cycles
IEC 61300-2-2
Flexing of strain relief
2 N / +/-90° / 100 cycles
IEC 61300-2-44
Multiple swappable mounting
flanges
Suitable for IP65 version
EtO-sterilizable
E-2000™ Family
Injection molded outer housing
 Connector housing totally encloses ferrule to
optimally protect it from dust, contaminants and
scratches
DIAMOND two component ferrule
 Active Core Alignment minimizes fiber
core offset and ensure optimal connector
performance
Cable diameter independent
crimping sleeve
Modular designed compact mating adapter with
interchangeable mounting bracket
 Permits dense packing
 Offers several installation solutions
Interchangeable color-coded and mechanical-keyed frames (8 different colors and 6
different mechanical combinations)
 Permits clear and unmistakable identification of lines on crowded panels
 Guards against improper connections
 Adaptable to evolving needs
Universal bend protection
boot
Positive latching mechanism with interchan
geable, color-coded and mechanically-keyed
thumb-latch
 Offers superior retention under axial load
 Allows higher packing densities
 Distinct color-coded thumb latch allows easy optical line identification and ordering
All cable types supported
Integrated metal protective cap
 Automatically protects personnel from
eye-damaging laser radiation
 Closes automatically upon extraction to
protect ferrule from dust and scratches
 Suitable for high power applications
Spring-loaded metal protection shutters
 Engages automatically to protect personnel
from eye-damaging laser radiation
 Angled, anti-reflection surface ensures low
reflectance in unmated state, inducing light
diffusion
COLOR KEYING
The E-2000TM system permits the user to specify the color of the thumb-latch and the mating adapter frame so
that different line types, uses, destinations and points of origin, etc. can be readily identified.
The thumb-latch and frame are available in eight distinct colors:
1.
2.
3.
4.
Blue
Beige (White)
Black
Red
5.
6.
7.
8.
Orange
Yellow
Green
Violet
MECHANICAL KEYING
Additionally, it will become increasingly necessary to guard against improper connection in multiple-service
patch facilities. The E-2000TM system permits the inclusion of a mechanical keying mechanism to ensure channel
differentiation.
The mechanical keying options are also color-coded as follows:
Key Nr. 1 Red
Key Nr. 2 Brown
Key Nr. 3 Yellow
NOTE
Key Nr. 4 Orange
Key Nr. 5 Violet
Key Nr. 6 Beige (White)
As standard, Diamond uses colored connector bodies, cable boots and mating adapter housings to identify the fiber type
(SM or MM 50/62.5µm) and ferrule polish (PC or APC).
Diamond`s standard connector/boot/adaptor colors are as follows: Beige/Black/Beige for MM PC 50µm, Beige/Beige/Beige
for MM PC 62.5µm, Blue/Blue/Blue for SM PC, and Green/Green/Green for SM APC. Other colors are available upon request.
E-2000™ Family
THE E-2000™ COMPACT
The E-2000™ COMPACT DUPLEX combines the familiarity of the RJ45 design and the optical performances of the
E-2000™ simplex connector. It is based on components of the E-2000™ simplex version and is joined by a simple
clip-bridge and a widened thumb-latch.
The E-2000™ COMPACT is the ideal solution for applications where an increasing number of cabling installations is
required, typically to support multimedia environments including voice, data and image transmission.
The color and mechanical keying have the same identification as those of the E-2000™ Simplex connector.
STANDARDS
 IEC 61 754-15
“Fiber optic connector interfaces – Part 15: Type LSH connector family”.
AVAILABLE AS
 Standard terminated connector
 Connector set (to be terminated with Diamond special equipment)
THE E-2000™ BACKPLANE
The E-2000™ Backplane combines the advantages of the E-2000™ SYSTEM and an optimal guiding mechanism for
secure backplane connection. When mated, the PCB connector is retained in the mating adapter eliminating all
stress on the PC Board.
It uses the common components of the E-2000™ Simplex version which are joined by a simple clip-bridge which
includes a radial, angular and longitudinal compensation. Clip bridges are available for 2 and 6 connectors.
The E-2000™ Backplane offers the same optical performances as the E-2000™ simplex connector.
The adapters can be easily mounted into the distribution panel.
The E-2000™Backplane covers all needs in this field of applications and offers:
 Same optical peformances as the E-2000™ Simplex version
 Active push pull retention
 Sufficiently long pre-mating tracks for repeatable mating and high stability
 Backplane modules designed for integration into metric backplane system as per IEC 1070-4-100
 Injection moulded housing (UL 94 V0 flammability rating)
 Positive latching mechanism with step process to prevent the backplane and the PCB from stress
 Backplane adapter with spring loaded shutters and connectors with protective metal caps
 Existing components can be upgraded to the backplane version with the use of a clip bridge and an adapted
latch
 Longitudinal mating compensation
AVAILABLE AS
 Standard terminated connector
 Connector set (to be terminated with Diamond special equipment)
The E-2000™ BACKPLANE is fully integrable into the IEC 1070-4-100 metric system
for backplane copper connectors: the 2 channel unit is 1 SU high, the 6 channel unit
is 2 SU high. Furthermore, they are fully modular combinable; to upgrade the
E-2000™ BACKPLANE to system of multiple channel design.
E-2000™ Family
THE E-2000™ INTERLOCK
DIAMOND presents a novel, reliable, and high-quality E-2000™ fiber optic connector and mating adapter with
an integrated electrical circuit breaker.
This is very useful in many laser systems where it is preferred to block the emission by means of an external
shutter rather than, for instance, to alter the internal laser's driving conditions.
The E-2000™ Interlock is particularly suitable for high-power applications or any other situation where light must
be rapidly interrupted due to safety and protection reasons.
The E-2000™ interlock is available in several Power Solution (PS) optical interfaces (i.e: PS collimated, PSf free
space, PM-PS, PSm, etc.) and supports all other standard E-2000™ features:
Standard and small core fibers
Standard, PM and other specialty fibers
High precision core placements thanks to the active core alignment (A.C.A.)
Color & mechanical coding
Automated metal protection cap
The E-2000™ mating adapter also offers metal shutters and thanks to interchangeable mounting brackets supports a
large variety of installation solutions, even on PCB.
AVAILABLE AS
 Standard terminated connector
OPTICAL SPECIFICATIONS FOR THE PS VERSION
IL (db) Against Reference
CONNECTOR TYPE
E-2000™ PS
WAVELENGHT (nm)
typ.
max.
1625 - 1550 - 1310
0.2
1060 - 980
0.3
TEST CONDITIONS
* Values obtained with Diamond qualified fibers
IEC 61300-3-4
RL Against Reference
connected
unmated
PC 0°
APC 4°
0.4
45
75
0.6
35*
60*
APC 4°
50
IEC 61300-3-6
OLCR method / *OCWR method
PCB thickness: 1,6mm
9.75
(Other fixation types upon request)
Max wall
E-2000™ Family
7.8
56
DETAILS X
B
15.2
CONSTRUCTION
0.95
8.9
9.1
C
9.75
0.95
16
9.75
C
A
+0.4
0
15
+0.5
0
12.7
42
15
8.9
42
CUT OUT
0.15
12.7
Interchangeable parts as
from E-2000™ system
Max wall thickness 1.6mm
7.8
56
Metal swinging spring
for electric contact
3
B
8.6
15.2
15.2
7.8
56
Plastic protection for metal
swinging
C
E
D
(O
MOUNTING INSTRUCTION
Interchangeable parts as
from E-2000™ system
10
10
6.2
10
6.2
5.2
8.6
2.4
5.2
ø 0.7
5.7
10
2.4
F
ø 0.7
D
5.7
D
4.8
Metal swinging spring
2.5 for electric contact
PCB thickness: 1,6mm
(Other fixation types upon request)
Plastic protection for metal
swinging spring
75
0.
10
4.8
0.95
m
10
2.5
F
PCB thickness: 1,6mm
Metal swinging spring
electric contact
(Other fixation types uponforrequest)
Plastic protection for metal
swinging spring
0.15
10
.R
ax
m
DETAILS X
Interchangeable parts as
from E-2000™ system
ax
10
75
0.
0.95
8.6
E
.R
3
SAFETY INFORMATION
DETAILS X
The Interlock feature in the E-2000™ connector has to be considered as being part of a complete safety system,
as it cannot be deemed as a stand-alone safety device.
In order to ensure safe operation it is mandatory to follow the operational information below:
Although equipped with connectors having an Interlock system, lasers should be operated only when connec tors are mated
The light source must be switched off during mating and de-mating.
0.15
0.95
WARNING: The user is responsible for ensuring that all local, state, and national laws, rules, codes, and regulations relating to the use of the E-2000™ Interlock in any particular application are satisfied.
E-2000™ Family
THE E-2000™ POWER SOLUTION (PS COLLIMATED)
Diamond E-2000™ PS connector is designed for high power applications up to 6 Watts optical power for SM fibers.
This has been developed to support the continuous rise of higher bitrates and longer transmission distances within
DWDM technology.
Diamond PS connectors are based on contacted expanded beam technology; where a section of graded index fiber
is spliced as a collimating lens, which enlarges the beam diameter and reduces power density at the connector
interface. Using Diamond Active Core Alignment (ACA) technology, we can achieve unrivaled low IL performance
for the PS technology by aligning the fiber exit angle instead of the core eccentricity as Diamond usually does on
SM fiber. This technology is applicable to most connectors interfaces, but due to safety issues Diamond suggests
to use it on E-2000™ and F-3000™ connectors with integrated metal protection caps and shutters.
E-2000™ PS connectors are available as simplex terminated connectors and backplane 2-6 channels.
FEATURES AND BENEFITS
16x reduced power density
Low Insertion loss
Ultra high polish for High return loss
Integrated metal protection caps and Shutters
Interchangeable colour- and mechanical-coded frames and
thumb latches
STANDARDS
 Passed long term test at 6W, 2000h
Passed Performance qualification according to IEC 61753-2-1, cat. U
Passed Reliability qualification according to IEC 62005-9-2, cat. U
Passed Long term Damp Heat according to
Telcordia GR-032685°C /85% r.h. 2000h
SAFETY INFORMATION FOR E-2000™ POWER SOLUTION
CLEANING
Cleanliness still remains the key word using high power. The basic concept using PS connectors is therefore the
following:
“before each mating procedure, the connectors must be absolutely clean and inspected with a microscope“.
The ferrule`s surface inspection should be performed using an optical microscope with a magnification of at least
200x. The connector is normally affected by contamination during handling and mating procedures; the degree
of cleanliness of the overall installation is also a critical parameter to be taken into consideration.
HANDLING
The Power Solution connectors should be operated with high power only when connected. When unmated, the light
source must absolutely be switched off.
SAFETY
Optical connectors are passive components not subjected to Laser safety, but when integrated in an active system,
as the output side of a light source, they will be submitted to it.
The following aspects are to be taken into account when evaluating the laser safety requirements:
- The exit beam of these connectors have a lower NA as standard connectors in air (NA=0.035) or ca. 2° divergence.
This is used in the calculation of the amount of light that can enter the pupil at 1m.
The following safety precautions are to be considered as a starting point, each is responsible to edict proper safety protocols and
we intend here just as to help doing this. The following precautions should not be considered as sufficient and should be reevaluated
from case to case.
- usage in restricted area, access only for authorized and qualified personnel.
- use protective glasses, skin protective measures recommended.
- optical behavior under control: eliminate reflections (also diffuse), close unused optical channels, avoid light beams at eye level.
- switch on/off system with remote control or interlock and additional automatic switch off safety system.
- warning signal when sources are active.
- laser classification markings and danger indications.
E-2000™ Family
THE E-2000™ FUSION
The E-2000™ FUSION allows you to quickly and easily make field terminations
with the performance you expect from Diamond-quality E-2000™ connectors.
The key to this system is DIAMOND's advanced "crocodile alberino" fusion field
ferrule assembly. The ferrule assembly consists of a factory-terminated fiber
endface, fiber stub, and integrated splice protection. The fiber endface is
core-centered via Diamond’s well-known Active Core Alignment process and
factory-polished to the company’s precise specifications.
The E-2000™ FUSION is then field terminated via a low loss fusion splice
using the new Diamond Zeus D50 Fusion Field Termination Kit.
The E-2000™ FUSION is available for SM and MM fiber (250μm, 600μm and
900μm) and cable (1.6-to 3.1mm) in both 0° PC or 8° APC versions.
Crocodile Alberino 2.5mm
FEATURES AND BENEFITS
 Simple, fast and reliable field termination
reduces operator error and cost per termination
 No need of glue
Outstanding optical performance
consistent and repeatable low IL / high RL
No polishing
eliminates the need for costly consumables
Fusion spliced pigtail performance and reliability without the cost and
space associated with splice enclosures, trays and protectors
AVAILABLE AS
Connector set, (to be terminated with Diamond special equipment)
COMPATIBLE SPLICERS WITH DIAMOND FUSION CROCODILE
Fitel (Types: S132C, S153, S178)
Sumitomo (Types: 71-C, T81C, Q101-CA)
SPECIFICATIONS
Insertion Loss (IL)
Return Loss (RL)
MULTIMODE
0° PC
SINGLE MODE
0° PC
SINGLE MODE
8° APC
typ. 0.2 max 0.5
typ. 0.25 max. 0.5
typ 0.25 max. 0.5
dB
IEC 61300-3-4; λ = 1300/1550nm
min. 40
min. 50
min. 70*
dB
IEC 61300-3-6; λ = 1300/1550nm
dB
IEC 61300-2-2; λ = 1300/1550nm
UNITS TEST CONDITIONS
max. ±0.1
Repeatability of IL
1000 mate/demate cycles
Service life
According to field experiences
Operating temperature
-25/+70**
°C
Storage temperature
-25/+70**
°C
* Measured with high precision reflectometer
** May be further limited by cable specifications
E-2000™ FUSION INSTALLATION CONCEPT
2
1
3
2
ZEUS D50 Fusion Splicer
E-2000™ Family
THE E-2000™ ACCESSORIES AND ACTIVE MODULES
The E-2000™ network accessories are available for many uses and can be deployed at several points in fiberoptic
networks, as well as in LABs or special applications.
These include the following product families:
Attenuators (OAF), transition adapters (UGT), optical termination modules (OTM), hybrid-adapters, optical reflectors
(OGR), multipurpose adapter system (MAS), ADT-UNI universal connector/adapter solutions, Interfaces modules (IMOD),
and active modules (MAT/MAR).
OAF E-2000™ ATTENUATORS
Attenuators are used to adapt the transmitted light power to the characteristics of the implanted receiver.
The OAF E-2000™ in-line fixed attenuator provide a precise and repeatable amount of light loss (attenuation)
via a doped fiber. This results in wavelength independent and stable attenuation values for typical wavelength
bands used in telecommunication applications (1260-1360 and 1460-1580 nm). OAF E-2000™ are available in
single mode PC and APC version, for attenuations from 2 dB to 30 dB, for optical power up to +20 dBm.
Other available OAF types are: F-3000™, FC, SC, LSA (DIN) and ST.
SPECIFICATIONS
SINGLEMODE
0° PC
SINGLE MODE
8° APC
Fiber
Wavelengths
Nominal attenuation
Tolerance*
9/125
µm
1260-1360 and 1460-1580
nm
245 610
15
2025 30
±0.5
±0.5
±0.5
±0.5
±1
±1.5
±2
±2.5
±2.5
<0.5 over service life
Service life
1000 matings (According to field experience)
>45
>65
Temperature range
dB
dB
dB
Repeatability
Return loss
UNITS
-25/+70
dB
°C
* Values measured using 1310 or 1550 nm LED source. Additional IL induced by modal noise 0,05 dB/dB.
The excess attenuation due to the 2 connections may be as high as 0.5 dB max.
E-2000™ UGT-SI (Optical Transition Adapters)
Optical Sacrificial Interfaces are compact, in-line, male-to-female components, especially used in laboratory and
field test equipment to protect front panel connector end-faces from the damage and contamination of repeated
mating and de-mating.
Optical Transition Adapters (UGT) are compact, in-line, male-to-female elements used to transition between
similar or dissimilar endface geometries, eg. from 0° PC connectors to 8° angle-polished (APC) connectors.
(Or the reverse.) They are also of value as "sacrificial" interfaces to protect connector endfaces from the damage
and contamination of repeated matings. Other available UGT-SI types are: F-3000™, FC, SC and ST™.
SPECIFICATIONS
Insertion Loss (IL)*
Return Loss (RL)
Repeatability of IL
Service life
TEST CONDITIONS
SM G. 652D
MM
UNITS
max 0.7 dB
max 0.7 dB
dB
IEC 61300-3-4; λ = 1300/1550nm SM - 850/1300nm MM
PC min 45 / APC min 70**
min 35 dB
dB
IEC 61300-3-6; λ = 1300/1550nm SM - 850/1300nm MM
dB
IEC 61300-2-2; λ = 1300/1550nm SM - 850/1300nm MM
max ±0.3
500 mate/demate cycles
Operating temperature
-40/+85
°C
Storage temperature
-40/+90
°C
* Total Insertion Loss. Additional IL due to modal noise max 0.5 dB
** Measured with high resolution reflectometer HP
Other fibers available upon request
E-2000™ Family
E-2000™ OTM (Optical Termination Modules)
E-2000™ OTM Optical Termination Modules are used as fiber termination on open, unused channels in telecommunication distribution panels, measuring devices and CATV installations, in order to have a stable and lower
back reflection in the system. Other available OTM types are: F-3000™, FC, and SC.
SPECIFICATIONS
SINGLE MODE
0° PC
SINGLEMODE
MODE
SINGLE
PC
8°0°APC
Insertion Loss (IL)
UNITS TEST CONDITIONS
-
NA
min 45
Return Loss (RL)
dB
min 70*
IEC 61300-3-6; λ = 1300/1550nm
500 mate/demate cycles
Service life
Operating temperature
-40/+85
°C
Storage temperature
-40/+90
°C
* Measured with high precision reflectometer
E-2000™ HYBRID ADAPTERS
E-2000™ hybrid adapters ensure a connection between a E-2000™ and SC/FC/ST™/LSA (DIN) fiber optic
connectors.
Their optical performance and compact size make is a logical and cost-effective alternative to hybrid patch
assemblies.
SPECIFICATIONS
Insertion Loss (IL)*
MULTIMODE
0° PC
SINGLE MODE
0° PC
SINGLE MODE
8° APC
typ. 0.15
typ. 0.2
typ. 0.2
max ±0.1
Repeatability of IL
Service life
UNITS TEST CONDITIONS
dB
IEC 61300-3-4; λ = 1300/1550nm
dB
IEC 61300-2-2; λ = 1300/1550nm
According to field experience
1000 mate/demate cycles
Operating temperature
-40/+85
°C
Storage temperature
-40/+90
°C
* IL measured using twoo reference cables
NOTE Optical and mechanical specifications are based on the use of the connector of corresponding
standard; the above table reflects typical values.
E-2000™ OGR (Optical Reflectors)
E-2000™ OGR are normally used as fiber termination with the highest possible back reflection.
They are mainly deployed in device manufacturing or LABs for calibration purposes, or for measuring back
reflection within fiber-optic components. They are also used to provide reference reflection levels by measuring
the sensitivity of sources to back reflection from other devices.
Other available OGR types are: F-3000™, FC, SC and ST™.
SPECIFICATIONS
SINGLE MODE
PC/APC
UNITS
Return Loss
(Including connector loss)
Typ. 0.5
dB
IEC 61300-3-6; λ = 1310/1550nm
Polarization dependence of
return loss
Typ. 0.2 max. 0.3
dB
IEC 61300-3-2; λ = 1550nm
Wavelength
dependence of return loss
Typ. 0.5 max. 0.8
dB
IEC 61300-3-7; λ = from 1280 to 1580nm
max +/- 0.1
dB
IEC 61300-3-6; λ = 1310/1550nm
Repeatability of RL
Service life
500 mate/demate
TEST CONDITIONS
IEC 61300-2-2
Operating temperature
-25 / +70
°C
Storage temperature
-40 / +85
°C
IEC 61300-2-22
E-2000™ Family
E-2000™ MAS (Multipurpose Adapter System)
The E-2000™ MAS is a modular interchangeable adapters based on 2.5 mm diameter ferrule whose size, ease
of cleaning and inspection, and optical performance make it an ideal choice for high performance applications
such as test and measurement equipment.
This system is composed of a flange which provides an internal connection via a FC or Mini-AVIM style connector
and a wide range of interchangeable adapters including the E-2000™, FC, SC, ST and LSA (DIN).
SPECIFICATIONS
MULTIMODE
0° PC
SINGLE MODE
0° PC
Insertion Loss (IL)*
Repeatability of IL*
SINGLE MODE
8° APC
UNITS TEST CONDITIONS
max 0.25
dB
IEC 61300-3-4; λ = 1300/1550nm
max ±0.15
dB
IEC 61300-2-2; λ = 1300/1550nm
Service life (adapters)
500 mating cycles
Service life (connectors)
1000 mating cycles
Operating temperature
-25/+70
°C
* Measured using two reference connectors. Valid for ferrule type 2.5 mm diameter. For other types, please contact your local DIAMOND representative
E-2000™ ADT-UNI UNIVERSAL CONNECTOR/ADAPTER
The ADT-UNI is a universal connector/adapter slution, which provides unparalleled optical performance and proven long-term reliability. The universal
adapters which allows the acceptance of E-2000™, FC, SC, LSA (DIN) and
ST™ connectors, are modular interchangeable adapters based on 2.5 mm
diameter mating sleeve whose size, ease of cleaning and inspection make
them an ideal choice for test and measurement equipment.
ADT/UNI are available in SM (typ. 0.2 dB) and MM (typ. 0.15dB).
E-2000™ IMOD (Interfaces Modules)
The E-2000™ Interface Module (IMOD) has been developed as a half adapter
for free space application of optical connector. These modules are used
more commonly for PC 0° connection, but version for using APC 8° ferrules
can be offered as custom component. The two major reasons for using a
high quality IMOD are the need of repeatable positioning in both axial and
radial direction between each connector and each IMOD.
Other available IMOD types are: F-3000™, FC, SC, ST, LSA (DIN), Mini-AVIM,
F-SMA.
E-2000™ MAT/MAR (Module Active Transmitter and Receivers)
E-2000™ Transmitter (MAT) and Receiver (MAR) modules are designed as
an IMOD with the appropriate fitting to adapt to an active component. The
MAT requires an optical component to focus the light source (Laser, LED)
to the ferrule position in the housing. Depending on the type of fiber (SM,
PM or MM) the active alignment device secured by laser welds on the fixing
flange is designed to guarantee optimal performance.
Construction for LED source transmitters and
receivers (2 axis alignment)
Construction for LED source transmitters
(3 axis alignment)
E-2000™ Family
DIAMOND TECHNOLOGIES
POWER SOLUTION OPTICAL INTERFACES
Diamond uses different methods for expanded beam alignment, depending on the final use of the assembly.
The main expanded beam types can be defined as the following: spliced GRIN lenses and spliced glass rod, or
endcap which provides a Diverging, Collimated or Focused exit beam. These optical interfaces are also suitable
for high power applications.
PS Collimated (Contact)
Diamond offers the Power Solution optical Interface which expands the MFD
of a SM fiber by splicing a GRIN lens at the extremity. The MFD at the end of
the connector is thus expanded by a factor 4, increasing the contact surface
by a factor of about 16. As a result the heat issues decrease but cleanliness
of the connectors and mating adapters is still important.
PM-PS Collimated Polarization Maintaining (Contact)
Polarization plays an important role in the industrial photonics market and
when coupled with medium-high power application, creates a highly critical
interface. Sensors and communication systems have been designed using
Polarization Maintaining or Polarizing fibers. Special connectors are required
for such applications, because the connection must be made with a certain
orientation. Only connectors with an orientation key are capable of properly
terminating these fibers.
PSm Power Solution Multimode (Contact)
No standards for large MM connectors has been defined with high power
application in mind. The quality of the contact is critical and the standard
SM fiber optical interface is not sufficient. Diamond has established a new
Optical Interface, the PSm, to fill this void and help end-users to source reliable connectors for these applications.
The optical interfaces use 100% concentricity measurement control and
optical geometry measurements. A special visual inspection completes the
Optical Interface definition.
PSf Free Space (Diverging, non contact)
A glass rod is spliced at the end of a SM fiber. This allows the beam to be
expanded before it exits the glass, diminishing the power density at the
glass-air interface. This technique is used for high-power applications, at the
injection or at the output to minimize the chance of burns at the interface.
Diamond provides the SM Power Solution Freespace Optical Interface using
this technology.
PSi Free Standing
The fiber-end free from epoxy glue allows proper thermal dissipation in the
region of maximum power density.
A proprietary design of mode-stripper can be integrated to obtain laser power
confinement in the fiber core. The amount of power stripped out from the
cladding is a function of the laser Beam Product Parameter (BPP) and of the
receiving fiber core diameter and numerical aperture (NA).
PSc Collimator Systems
Collimators are for use in a wide variety of optical systems.
These modules are designed to collimate or focus light exiting an optical
fiber to a desired beam diameter or spot size a specific distance away. Collimators are used with laser diodes, photodiodes, acoustic-optic modulators
and other fiber optic devices where a specific output is needed.
E-2000™ Family
VIS/NIR LOW WAVELENGTHS
Diamond offers the VIS/NIR optical interface for low wavelengths and
small core fibers on E-2000™ connectors based on the Active Core
Alignment (ACA) technology aiming to achieve unrivaled low IL performances. Other available types: F-3000™, SC, FC, LSA (DIN), DMI,
AVIM, Mini-AVIM.
9µm
λ=980nm
MFD=6µm
IL<0.4dB
Core
Advantages
Cladding
λ=632nm
MFD=4µm
IL<0.6dB
 Extremely low lateral offset for low insertion loss
 Ultra high polish for hight return loss
λ=532nm
MFD=3µm
IL<0.8dB
λ=405nm
MFD=2.5µm
IL<1dB
OPTICAL LINE IDENTIFICATION (OLiD)
DIAMOND has developed a new network monitoring system which is based
on Fiber Bragg Grating (FBG) technology. In a P2P network installation, this
technology is used to identify each fiber line and manage the Optical Line
Identification OLID information through a data base owned by the network
operator.
Available products
 E-2000™ OLID assemblies, UGT, Outlets
Panda
POLARIZATION MAINTAINING (PM)
PM connectors cover applications such as: measurement instrumentation, sensors, communication systems and medical devices. Utilizing
our Active Core Alignment process, we are able to independently optimize both insertion loss (IL) and extinction ratio (ER), eliminating the
need to compromise one performance feature over another.
Diamond provides high performance PM terminations directly to both
passive and active optical devices, as well as for pigtails and patch
cord assemblies.
SPECIFICATIONS
IL (dB)
97% (typ)
WAVELENGTH (nm)
1625 - 1550 - 1310
1060 - 980
830 - 780
635
532 - 460
405
TEST CONDITIONS
0.3
0.5
0.6
0.8
1.2
1.5
(0.15)
(0.25)
(0.3)
(0.4)
(0.6)
(0.75)
IEC 61300-3-34
Random mating
Service life
ER (dB)
min (typ)
23
21
20
20
20
18
(28)
(26)
(25)
(25)
(23)
(21)
RL (dB)
PC 0°
APC 8°
50*
50
40
40
35
35
IEC 61300-3-40
Low coherence
70*
60*
60**
60**
60**
60**
IEC 61300-3-6
*OCWR method
OLCR method
500 mate/demate cycles
NOTE - Optical performance values based on use of Panda PM fiber, use of other types or wavelengths
may impact performance values.
- Diamond performs extinction ratio (ER) measurements using the crossed-polarizer method
(similar to IEC 61300-3-40). This method requires the use of Glan-Thomson polarizers and of a
low coherence light source (bandwidth > 10 nm). As a guideline, the following table shows the
measurement accuracy that is achieved with our setup:
ER nominal value and accuracy: 20 dB ±1.5 dB 25 dB ±2.5 dB 30 dB ±3.5 dB.
- NA 0.12 ± 0.02
- IL performance intended for E-2000™. Other connector mechanical interface display higher
values. Please contact Diamond for values on your specific connector type.
** Limited by test conditions
Difference between key
and true polarization axis
Mechanical key
Core
Stress rod
Bow-Tie
Elliptical-clad
Stress member slow axis
True slow polarization axis
E-2000™ Family
DRAWINGS AND DIMENSIONS
E-2000™ SIMPLEX AND COMPACT CONNECTORS
E-2000TM Simplex connectors 900µm - 3mm boot style
Ferrule material:
External parts:
Zirconia/metal insert
Plastic
ca. 61
R
E-2000TM Simplex connectors 900µm short boot
39.8
4.9
12
31.5
6.7
E-2000TM Compact connectors 900µm - 3mm boot styles
7,4
13,1
ø 2,5
31,5
14,6
56
E-2000TM Compact connectors 900µm - 3mm 90° boot style
ca. 61
R
25
25
E-2000™ Family
E-2000™ SIMPLEX ADAPTERS
E-2000TM Simplex mating adapter with screw fixing clip
42
CUTOUT DIMENSIONS
18
13,3 ± 0.2
22
12.7
± 0.1
9.1 ± 0.2
8.9
FRONT SIDE
ca. 21
(M2) ø2.2 ± 0.2
E-2000™ Simplex mating adapter with quick fixing clip
(Typ A: for higher packaging density within E-2000TM cutout)
42
15.5
12.7
9,1 ± 0.2
13,3 ± 0.2
8.9
FRONT SIDE
ca. 21
Max wall thickness 1.6mm
E-2000TM Simplex mating adapter with quick fixing clip
(Typ B: for excellent stability within SC cutout)
12.1
8.9
9.5 +0.5
0
12.7
FRONT SIDE
ca. 21
13.1 +0.4
0
42
Max wall thickness 1.6mm
E-2000TM Simplex mating adapter with print fixing clip
10
42
FRONT SIDE
8.9
10
2.5
8.6
15
12.7
ø 0.7
E-2000™ Simplex mating adapter with 45° screw fixing clip
19
15
8.9
9,1 ±0.2
(M2) ø2.2 ±0.2
18
±0.1
Front side
12.7
FRONT SIDE
42
Shown as down orientation
E-2000™ Family
E-2000™ COMPACT ADAPTERS
E-2000™ Compact mating adapter with screw fixing clip
14.7
CUTOUT DIMENSIONS
± 0.2
15
± 0.2
± 0.1
13,3 ± 0.2
15
22
12.5
FRONT SIDE
ca. 21
18
42
(M2) ø2.2 ± 0.2
E-2000™ Compact mating adapter with quick fixing clips
18.5
14.7
12.5
FRONT SIDE
ca. 21
13,3 ± 0.2
42
Max wall thickness 1.6mm
E-2000™ Compact mating adapter with print fixing clip (snap closure)
14.7
23
13.1 ±0.2
12
12.5
ca. 15.5
FRONT SIDE
3
42
E-2000™ Compact mating adapter with print fixing clip (6 pins)
42
10
14.7
10
FRONT SIDE
2.5
14.4
15
12.5
ø 0.7
E-2000™ Compact mating adapter with 45° screw fixing clip
Front side
Shown as right mounting
±0.1
12.5
(M2) ø2.2
±0.2
±0.1
25
18
12.5
13.3 -0.2
0
22
14.7
12.5
FRONT SIDE
42
E-2000™ Family
E-2000™ BACKPLANE CONNECTOR AND ADAPTERS
E-2000TM Backplane connectors on 900 µm fiber, without boot
Zirconia/metal insert
Plastic
�
Ferrule material:
External parts:
E-2000TM PCB adapters, 2 and 6 channels
PBT (black)
�
�
Material:
Max. torque 0.4 Nm
Max. torque 0.4 Nm
E-2000TM Backplane adapters, 2 and 6 channels
Material:Plastic
Mating sleeve:
Zirconia
NOTE Standard colors: MM PC (beige); SM PC (blue); SM APC (green), PS (red)
E-2000™ Family
MOUNTING HOLES
6 channel unit
37
4x
0.2
18.5
17.5
22
18
13.3 +0.3
0
6.5
8.5
Ø 2.2
+0.2
0
Ø 5 +0.1
0
40 max.
20
40
50.3 ±0.2
2 channel unit
4x
0.1
4x
0.2
7.4
Ø 5 +0.1
0
17.5
22
18
13.3 +0.3
0
6.5
8.5
Ø 2.2 +0.2
0
3.7
40 max.
20.7 ±0.2
10.4
2x
0.1
MODULAR MOUNTING
6 channel unit
min.50
2 channel unit
min.21
6 und 2 Kanal
Kombinierte Montage
min.36
20
E-2000™ Family
APPLICATIONS NOTES
Fiber optic connectors for backplane also require the pre-mating of all involved components, to prevent lateral
forces, while mated.
For repeatable and secure pre-mating and mating procedures, the E-2000™ BACKPLANE has a high adaptation
degree of the connectors at the PC Board to the backplane mating adapter.
PRE-MATING CONDITIONS
The system is designed to
ricover lateral misalignment
up to ± 1.5 mm.
MATED CONDITIONS
Angular misalignment of
±1.5° degree and lateral misalignment of ± 0.5 mm resp. ±
1 mm are compensated.
E-2000™ Family
PROPOSED SPACE REQUIREMENT AND CONTROL ZONE
The E-2000™ BACKPLANE mechanism garantees secure retention and eliminates stress at the PC Board when
mated. After completion of the mating procedure the system has a 2.5 mm longitudinal way compensation.
pre-mating
mating
contact and retention
contact, retention and
longitudinal compensation
start of demating
3
OAF E-2000™ ATTENUATORS
UGT E-2000™ TRANSITION ADAPTERS
9
0°/8°
0°/8°
44,7
OTM E-2000™ OPTICAL TERMINATION MODULES
ca. 40
max. 38
+ 0,2
12,05
12 +0,05
6.7
E-2000™ Family
E-2000™ HYBRID ADAPTERS
33.2
Hybrid E-2000™ / LSA (DIN)
10.7
4.9
9
+0.2
0
2
0
+0
.2
5.5 D11
6.5
22
18
±0.2
13.3
13
18 ±0.1
Ø 2.5
4.5 D11
M5.5x0.5
9.2
2.
Max
wall thickness
3 mm
(M
2)
/Ø
Stand. max
wall thickness
2 mm
M2
b
28.45
+0
.2
Hybrid E-2000™ / FC
2.
2
0
5.95
4.9
9
+0.2
0
0
+0
2
2.
/Ø
Stand. max
wall thickness
2 mm
(M
2)
Max
wall thickness
2 mm
.2
M8x0.75
9
+0
0 .2
6.5
6.5
22
18
±0.2
13.3
18 ±0.1
13
Ø 2.5
18 ±0.1
(M
2)
/Ø
9.2
M2
34.8
+0
.2
Hybrid E-2000™ / SC
2.
2
0
12.4
4.9
9
22
+0
.2
6.5
9.3
18
13.3
±0.2
±0.1
18
6.5
9.5+0.5
0
18
13
±0.1
Ø 2.5
(M
2)
/Ø
9.2+0.2
0
0
13.1+0.4
0
(M
2)
/Ø
2.
2
Stand. max
wall thickness
2 mm
Max
wall thickness
2 mm
M2
12.8
35.75
.2
Hybrid E-2000™ / ST™
2.
2
0
+0
13.25
4.9
9
6.5
22
18
13.3
±0.2
18
±0.1
13
Ø 2.5
6.5
2)
/Ø
2.
2
0
+0
.2
9.
7
±0
.1
18 ±0.1
(M
2)
/Ø
9.2+0.2
0
(M
Max.
wall thickness
2 mm
ca. 39,12
OGR E-2000™ OPTICAL REFLECTORS
ca. 38
12 +0,2
+0,05
Stand. max
wall thickness
2 mm
M2
E-2000™ Family
E-2000™ MAS (MULTIPURPOSE ADAPTER SYSTEM)
5.3
14
4
10.6
M2
15
11.6
CUTOUT
DIMENSIONS
6.45
10.6
1
1
14
4
M2
10.6
ø 10.5
11.6
11.6
15
M 5 x 0.5
1
MAS Universal flange (Mini-AVIM interface)
ø 10.5
11.6
M 8 x 0.75
1
MAS Universal flange (FC interface)
CUTOUT
DIMENSIONS
10.6
1
1
(25.45)
(20.5)
ø 2.5
(16.65)
MAS E-2000™
15
14
9
13
M10x0.5
E-2000™ ADT-UNI UNIVERSAL ADAPTER
22
Ø 2.5
38.9
9
ø2,2
22,5
4,9
A
6,5
18
22
E-2000™ IMOD (INTERFACE MODULE)
9
18
±0.2
18 ±0.1
2
+0.
0
9
6.5
6.5
E-2000™ MAT/MAR
22
18
9.8 ±0.2
13.3
Panel mount
(M
2)/Ø
22.5
2.2 +0.2
0
M2
Wall thickness: 3 mm max
PCB mounting clip
PCB mount
5
30.7
.3
.1
in
DIAMOND
9
2.5
6.5
5
23
22
23.5
m
22.5
7.5
ORDER INFORMATION
Please contact your nearest local Diamond representative or visit www.diamond-fo.com website.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement