User’s Manual
Residential & Light Commerical Unit
New Released Form: U-Remote RG94-160101
SPLIT-TYPE ROOM AIR CONDITIONER
Remote Controller RG94
2016 Johnson Controls, Inc. www.johnsoncontrols.com Doc. No.
: U-Remote RG94-160101
Johnson Controls reserve the right to change the product features without prior notice.
Issue Date
Jan 1, 2016
CONTENTS
Remote controller Specifications...................................................
2
Operation buttons .................. .........................................................
3
Indicators on LCD ..........................................................................
6
How to use the buttons ................................................................. 7
Auto operation.................................................................................
Cooling/Heating/Fan operation......................................................
Dehumidifying operation ...............................................................
8
Set the present time .......................................................................
8
Timer operation...............................................................................
9
Handling the remote controller ......................................................
13
7
7
NOTE:
Buttons design is based on typical model and might be slightly different from the
actual one you purchased the actual shape shall prevail.
All the functions described are accomplished by the unit. If the unit has no this
feature, there is no corresponding operation happened when press the relative
button on the remote controller.
, ,
, ,
, , ,,
USER'S MANUAL on function description, the description of USER'S MANUAL
shall prevail.
Remote Controller Specifications
Model
Rated Voltage
Signal Receiving
Range
Environment
RG94A/BGEF
3.0V(Dry batteries R03/LR03 2)
8m auto cool dry heat fan set temp. timer on timer off
ECO follow me sleep silence
MODE
TURBO
FAN
SLEEP
SILENCE
LED
TIMER ON/OFF CLOCK
FOLLOW ME
ION
SWING SWING
1
2
Operation of buttons
3
4
5
6
MODE
TURBO
FAN
SLEEP
SILENCE
LED
TIMER ON/OFF CLOCK
FOLLOW ME
ION
SWING SWING
10
11
7
8
9
1 MODE Button
Press this button to modify the air conditioner mode in a sequence of following:
AUTO COOL DRY HEAT FAN
NOTE Please do not select HEAT mode if the machine you purchased is cooling only type.
Heat mode is not supported by the cooling only appliance.
2 TURBO Button
Active/Disable Turbo function. Turbo function enables the unit to reach the preset temperature at cooling or heating operation in the shortest time(if the unit does not support this function, there is no corresponding operation happened when pressing this button.)
4
3 TIMER Button
Used to preset the time ON (start to operate) and the time OFF (turn off the operation).
ON/OFF Button
This button turns the air conditioner ON and OFF.
12
5
FOLLOW ME/ION Button
Active/Disable Turbo function. Hold down this buuton for at least 2 seconds to activate ION function.
Under follow me mode, the remote display is actual temperature at its location. The remote control will send this signal to the air conditioner every 3 minutes interval until press the Follow
Me button again. The air conditioner will cancel the Follow Me feature automatically if it does not receive the signal during any 7 minutes interval.
When the ION funtion is activated, the Ionizer or Plasma Dust Collector of the indoor unit can generate abundant anions to fill the room with refreshing and natural air.
Operation of buttons
1
2
MODE
TURBO
FAN
SLEEP
SILENCE
LED
6
3
4
5
TIMER ON/OFF CLOCK
FOLLOW ME
ION
SWING SWING
10
11
7
8
9
12
6
SWING Button ( )
Used to stop or start vertical louver movement and set the desired left/right air flow direction.
The vertical louver changes 6 degree in angle for each press. If keep pushing more than 2 seconds, the vertical louver swing feature is activated.
7
FAN Button
Used to select the fan speed in four steps:
AUTO LOW MED HIGH
NOTE: You can not switch the fan speed in
AUTO or DRY mode.
9
8
SLEEP/SILENCE Button
Active/Disable SLEEP function. If pushing more than 2 seconds, the SILENCE function will be activated, pushing more than 2 seconds again to disable.
When the Silence function is activated, the compressor will operate at low frequency and the indoor unit will bring faint breeze, which will reduce the noise to the lowest level and creat a quiet and comfortable room for you. Due to low frequency operation of compressor, it may result in insufficient cooling and heating capacity.
The sleep function can maintain the most comfortable temperature and save energy.
This function is available on COOL, HEAT or
, ,
AUTO mode only .
,,
USER S MANUAL.
,,
NOTE: While the unit is running under SLEEP mode, it would be cancelled if MODE, FAN
SPEED or ON/OFF button is pressed.
9 LED Button
Disable/Active indoor screen Display. When pushing the button, the indoor screen display is cleared, press it again to light the display.
Operation of buttons
1
2
MODE
TURBO
FAN
SLEEP
SILENCE
LED
10
11
7
8
9
6
3
4
5
TIMER ON/OFF CLOCK
FOLLOW ME
ION
SWING SWING
12
10 UP Button( )
Push this button to increase the indoor
DOWN Button( )
Push this button to decrease the indoor o
NOTE Temperature contol is not available in Fan mode.
o
Used to set the time(24 hours).
Used to stop or start horizontal louver movement or set the desired up/down air flow direction. The louver changes 6 degree in angle for each press. If keep pushing more than 2 seconds, the louver will swing up and down automatically.
Indicators on LCD
Information are displayed when the remote controller is powered up.
auto cool dry heat fan set temp. timer on timer off follow me sleep silence
ECO
Mode display
AUTO COOL DRY
HEAT FAN timer on
Displayed when TIMER ON time is set.
timer off Displayed when TIMER OFF time is set.
Show set temperature or room temperature, or time under TIMER setting.
Not available for this unit
sleep
Displayed in Sleep Mode operation.
follow me
Display in Follow Me Mode operation
silence
Displayed in Silence Mode operation.
Display the present time.
Fan speed indication
Low speed
Medium speed
High speed
Auto fan speed
Note:
All indicators shown in the figure are for the purpose of clear presentation. But during the actual operation only the relative functional signs are shown on the display window.
1
3
1
3
How to use the buttons auto set temp.
MODE
TURBO
FAN
SLEEP
SILENCE
LED
TIMER ON/OFF CLOCK
cool set temp. timer on follow me sleep silence
MODE
TURBO
FAN
SLEEP
SILENCE
LED
TIMER ON/OFF CLOCK
Auto operation
Ensure the unit is plugged in and power is available. The OPERATION indicator on the display panel of the indoor unit starts flashing.
1. Press the MODE button to select Auto.
2. Press the UP/DOWN button to set the
desired temperature. The temperature can
O O O
be set within a range of 17 C~ 30 C in 1 C
increments.
3. Press the ON/OFFbutton to start the air
conditioner.
2
2
NOTE
1. In the Auto mode, the air conditioner can logically
choose the mode of Cooling, Fan, and Heating
by sensing the difference between the actual
ambient room temperature and the setting
temperature on the remote controller.
2. In the Auto mode, you can not switch the fan speed.
It has already been automatically controlled.
3. If the Auto mode is not comfortable for you , the
desired mode can be selected manually.
Cooling /Heating/Fan operation
Ensure the unit is plugged in and power is available.
1. Press the MODE button to select COOL,
HEAT(cooling & heating models only) or
FAN mode.
2. Press the UP/DOWN buttons to set the
desired temperature. The temperature can
O O
increments.
3. Press the FAN button to select the fan speed
in four steps- Auto, Low, Med,or High.
4. Press the ON/OFF button to start the air
conditioner.
NOTE
In the FAN mode, the setting temperature is not
displayed in the remote controller and you are not
able to control the room temperature either. In this
case, only step 1, 3 and 4 may be performed.
4
3
1
set temp. dry
1
MODE
TURBO
FAN
SLEEP
SILENCE
LED
Dehumidifying operation
Ensure the unit is plugged in and power is available. The OPERATION indicator on the display panel of the indoor unit starts flashing.
1. Press the MODE button to select DRY mode.
2. Press the UP/DOWN buttons to set the
desired temperature. The temperature
O
3. Press the ON/OFF button to start the air
conditioner.
NOTE
In the Dehumidifying mode, you can not switch
the fan speed. It has already been automatically
controlled.
2
TIMER ON/OFF CLOCK
cool set temp. timer on follow me sleep silence
MODE
TURBO
FAN
SLEEP
SILENCE
LED
TIMER ON/OFF CLOCK
2
Set the present time
Before you start operating the air conditioner, set the clock of the remote controller using the procedures given in this section. The clock panel on the remote controller will display the time regardless of whether the air conditioner is in use or not.
Initial Setting of the Clock
After batteries are inserted in the remote controller, the clock panel will display "12:00" and begin to flash.
1. UP/DOWN adjust button
Press this button to set time.
Forward.
.
Backward.
Each time you press the button, the time
moves forward or backward by one minute
.
depending on which side you press. The
time alters as quickly as you push the button.
If hold down the button, the time moves
forward or backward by 10 minutes
depending on which side you press.
1
1
cool set temp. timer on follow me sleep silence
MODE
TURBO
FAN
SLEEP
SILENCE
LED
TIMER ON/OFF CLOCK
cool set temp. timer on timer off follow me sleep silence
MODE
TURBO
FAN
SLEEP
SILENCE
LED
TIMER ON/OFF CLOCK
2
2
2.
CLOCK button
When the right time is achieved, press the
CLOCK button or release the or and wait for 3 seconds, the clock time stops flashing and the clock starts operating.
3.Readjusting the Clock
Hold down the CLOCK button for 3 seconds, the colon in the clock display will start to flash.
To set the new time, follow 1 and 2 steps of
"Initial Setting of the Clock".
Note: The time of the CLOCK must be set before the AUTO-TIMER feature will operate.
If you readjust the time of the CLOCK after setting the AUTO-ON/OFF timer, the remote controller will send the readjusted timer information to the unit.
* Clock accuracy is within 15 seconds per day.
Timer operation
Press the TIMER button to set the auto-on and auto-off time of the unit.
To set the Auto-on time.
1. Press the TIMER button to show " timer on",
the last Auto-on setting time and the signal "h"
will be shown on the LCD display area. Now it
is ready to reset the Auto-on time to START
the operation.
2. Push the UP/DOWN button to set desired
Auto-on time. Each time you press the button,
the time increases/decreases by half an hour
between 0 and 10 hours and by one hour
between 10 and 24 hours.
3. After setting the TIMER ON ,there will be a one
second delay before the remote controller
transmits the signal to the air conditioner. Then,
after approximately another 2 seconds, the
signal "h" and time will disappear and "timer
on" indicator will remain on the LCD display
window, the set temperature will re-appear
on the LCD display window.
1
cool set temp. timer on timer off follow me sleep silence
MODE
TURBO
FAN
SLEEP
SILENCE
LED
TIMER ON/OFF CLOCK
2
To set the Auto-off time.
1. Press the TIMER button to show " timer off ",
the last Auto-off setting time and the signal "h"
will be shown on the LCD display area. Now it
is ready to reset the Auto-off time to STOP the
operation.
2. Push the UP/DOWN button to set desired
Auto-off time. Each time you press the button,
the time increases/decreases by half an hour
between 0 and 10 hours and by one hour
between 10 and 24 hours.
3. After setting the TIMER OFF ,there will be a
one second delay before the remote controller
transmits the signal to the air conditioner. Then,
after approximately another 2 seconds, the signal
"h" will disappear and "timer off" indicator will
remain on, the set temperature will re-appear on
the LCD display window.
!
CAUTION
When you select the timer operation, the remote controller automatically transmits the
timer signal to the indoor unit for the specified time. Therefore, keep the remote
controller in a location where it can transmit the signal to the indoor unit properly.
The effective operation time set by the remote controller for the timer function
is limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0,
5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12, 13, 14, 15,16,17, 18, 19, 20,
21, 22, 23 and 24.
Example of timer setting
timer on
Set
Off
Start
6 hours later
timer off
Stop
On
Set 10 hours later
TIMER ON
(Auto-on Operation)
The TIMER ON feature is useful when you want the unit to turn on automatically before you return home. The air conditioner will automatically start operating at the set time.
Example:
To start the air conditioner in 6 hours.
1. Press the TIMER button to show "timer on" ,
the last setting of starting operation time and
the signal "h" will show on the display area.
2. Press the UP/DOWN button to display "6.0h"
on the TIMER ON display of the remote
controller.
3. Wait for 3 seconds and the digital display
area will show the temperature again. The
"timer on" indicator remains on and this
function is activated.
TIMER OFF
(Auto-off Operation)
The TIMER OFF feature is useful when you want the unit to turn off automatically after you go to bed. The air conditioner will stop automatically at the set time.
Example:
To stop the air conditioner in 10 hours.
1. Press the TIMER button to show "timer off" ,
the last setting of stopping operation time
and the signal "h" will show on the display area.
2. Press the UP/DOWN button to display "10h"
on the TIMER OFF display of the remote controller.
3. Wait for 3 seconds and the digital display area
will show the temperature again. The " timer off "
indicator remains on and this function is activated.
timer on timer off
Start
On
Set
2 hours later after setting
Stop
10 hours later after setting
Off
Set
2 hours later after setting
Start
Stop
5 hours later after setting
COMBINED TIMER
(Setting both ON and OFF timers simultaneously)
TIMER OFF TIMER ON
(On Stop Start operation)
This feature is useful when you want to stop the air conditioner after you go to bed, and start it again in the morning when you wake up or when you return home.
Example:
To stop the air conditioner 2 hours after setting and start it again 10 hours after setting.
1. Press the TIMER button to display " timer off " .
2. Press the UP/DOWN button to display " 2.0h "
on the TIMER OFF display.
3. Press the TIMER button to display " timer on " .
4. Press the UP/DOWNbutton to display " 10h "
on the TIMER ON display .
5. Wait for 3 seconds and the digital display area
will show the temperature again. The " timer on
timer off " indicator remains on and this function
is activated.
TIMER ON TIMER OFF
(Off Start Stop operation)
This feature is useful when you want to start the air conditioner before you wake up and stop it after you leave the house.
Example:
To start the air conditioner 2 hours after setting, and stop it 5 hours after setting.
1. Press the TIMER button to display " timer on " .
2. Press the UP/DOWN button to display " 2.0h "
on the TIMER ON display.
3. Press the TIMER button to display " timer off " .
4. Press the UP/DOWNbutton to display " 5.0h "
on the TIMER OFF display .
5. Wait for 3 seconds and the digital display area
will show the temperature again. The " timer on
timer off " indicator remains on and this function
is activated.
Handling the remote controller
8m
Location of the remote controller.
Use the remote controller within a distance of 8 meters from the appliance, pointing it towards the receiver. Reception is confirmed by a beep.
CAUTIONS
The air conditioner will not operate if curtains, doors or other materials block the signals from the remote controller to the indoor unit.
Prevent any liquid from falling into the remote controller. Do not expose the remote controller to direct sunlight or heat.
If the infrared signal receiver on the indoor unit is exposed to direct sunlight, the air conditioner may not function properly. Use curtains to prevent the sunlight from falling on the receiver.
If other electrical appliances react to the remote controller, either move these appliances or consult your local dealer.
Do not drop the remote controller. Handle with care.
Do not place heavy objects on the remote controller, or step on it.
Using the remote controller holder(optional)
The remote controller can be attached to a wall or pillar by using a remote controller holder(not supplied, purchased separately).
Before installing the remote controller, check that the air conditioner receives the signals properly.
Install the remote controller with two screws.
For installing or removing the remote controller, move it up or down in the holder.
Replacing batteries
The following cases signify exhausted batteries.
Replace old batteries with new ones.
Receiving beep is not emitted when a signal
is transmitted.
Indicator fades away.
The remote controller is powed by two dry batteries (R03/LR03X2) housed in the back rear part and protected by a cover.
(1) Remove the cover in the back of the
remote controller.
(2) Remove the old batteries and insert the new
batteries,placing the(+) and (-) ends correctly.
(3) Install the cover back on.
NOTE: When the batteries are removed, the remote controller erases all programming. After inserting new batteries, the remote controller must be reprogrammed.
CAUTIONS
Do not mix old and new batteries or batteries of different types.
Do not leave the batteries in the remote controller if they are not going to be used for
2 or 3 months.
Do not dispose batteries as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.
