RELEA SE NOTE S
MATRIX®GUIDANCE
RELEASE NOTES
Language Update v10.02
M AT R I X P R O G S
March 2017
• Update to support Production requirements
Matrix Pro GS v4.21 Language Update v10.01
November 2016
New:
• Added Swedish
Matrix Pro GS v4.21
August 2016
WARNING: This software update is not compatible with StarGuide or Matrix Pro GS
consoles providing automatic section control with current versions of
Kverneland Flow Mate Control, Flow Master and Focus II rate controllers.
New Features:
• Curved AB guidance mode added for FieldPilot Pro and UniPilot Pro systems
• Support for optional External Lightbar
• Enhanced Reverse Sense performance when operating FieldPilot Pro and UniPilot Pro.
• SCM Pro can be enabled from the GUI – no need for USB Drive app
Fixes:
• Corrects problem where the CAN speed message used by some connected devices stopped being broadcast at zero speed.
• Multiple changes to FieldPilot Pro and UniPilot Pro pages, Help Text, and pop-up dialogs
• Corrects problem where the Target rate displayed after power-up was the last rate from the VRA job in the previous session
• Corrects problem where some systems would fail to consistently recognize SCM Pro at console boot
• Corrects problem where time was not saved to the Real time clock
• Corrects problem where the Circle-Pivot guidance mode guideline in pdf reports was sometimes rendered poorly
• Manual PRN selection has been removed from the GUI when the receiver port is set to External
• Corrects problem where some NovAtel external receivers would be errantly reconfigured during console boot
• Cosmetic enhancements to multiple pages
NOTE: Several of the changes in v4.21 require that Fieldware Link users update to Fieldware Link v5.02.
Matrix Pro GS v4.20 Language Update v10.00
June 2016
New:
• Added Estonian
Matrix Pro GS v4.20 Language Update
May 2016
Fix:
• Updated all languages with AutoSteer translations
• Corrections to several help text and pop-up dialogs for FieldPilot Pro & UniPilot Pro
Matrix Pro GS v4.20
March 2016
WARNING: This software update is not compatible with StarGuide or Matrix Pro GS consoles providing automatic section control with current versions of
Kverneland Flow Mate Control, Flow Master and Focus II rate controllers.
New Features:
• First Release for FieldPilot Pro & UniPilot Pro Autosteering systems
• Supported Steering modes for FieldPilot Pro & UniPilot Pro
• Straight-line AB
• Circle Pivot
NOTE: Last Pass and Curved AB modes are not supported for FieldPilot Pro and UniPilot Pro in v4.20
• Autosteer Demo mode built into application
• FieldPilot Pro & UniPilot Pro pages only supported in English language. Language updates coming soon for the other languages already supported by
Matrix GS and Aeros. Note: non-AutoSteer pages supported in the same languages as v4.12
98-01430-ENUS R16
www.teejet.com
R ELE A SE NOTE S
• Internal GNSS Receiver now operates at 115200 baud, 8-N-1.
• GGA @ 10 Hz, VTG @ 10 Hz, ZDA @ 1 Hz
Fixes:
• Changes to GNSS subsystem result in faster boot times for many configurations, and GNSS position continuity while opening and closing jobs
• Increased the speed at which FieldPilot setup values increase/decrease on the console
• Job must be closed before any Job Data can be transferred to/from console
• Corrected problem where vehicle profiles that did not include a BoomPilot device that were created in earlier versions would not load in later software
versions. Note: loading profile the first time in v4.20 will generate a warning. Saving the profile again will prevent further warnings.
• Corrected problem where sometimes external GNSS receivers were being reconfigured during console boot.
• VTG enabled, and SBAS disabled for default Chinese configuration
Matrix Pro GS v4.12
November 2015
New Features:
• Boot time reduced by enhancements to GNSS receiver operation
Fixes:
• Corrections for Japanese language selection and operation
• Corrected language in Job Summary screen when set to Czech language
Matrix Pro GS v4.11
April 2015
New Features:
• GLONASS included as standard feature in all Matrix Pro GS units shipping after approximately May 1, 2015
• Language addition: Bulgarian, Czech, Chinese, Danish, Dutch, English [INTL], English [US], French, German, Hungarian, Italian, Japanese, Lithuanian,
Polish, Portuguese [BZ], Romanian, Russian, Spanish [CA/SA], Spanish [EU]
• Additional GNSS Receiver mode that allows user to select GPS+GLONASS+SBAS
• Date/Time in job names changed to ISO date/time format
• Automatic Section Control Overlap % now defaults to 100%
• Default Job mode changed from Advanced to Simple
• Option to reset the ClearPath GNSS filter when opening job – USB Drive required to turn feature on/off
• GNSS Receiver model code identified in GNSS Stats
Fixes:
• Non-critical ISOXML import errors no longer generate GUI pop-ups
• Laterally offset boom configurations correctly map boom location when running VRA and/or IC18/IC34 rate control
• In VRA applications, when available from the rate controller or the preplanned, job, the following data is now included in the pdf report:
• Applied Area
• Applied Volume
• Corrected problem where updating from v2.50 toggled Auto Steer On and the Auto Steer was not supported in the original machine profile.
Matrix Pro GS v4.10
September 2014
New Feature:
• TeeJet compatible ISOXML prescription maps can be imported for variable rate applications
Matrix Pro GS v4.00
June 2014
New Features:
• Third-Party Rate control (VRA) added for the following rate controller protocols:
• LH5000 (e.g. TeeJet 500, Radion 8140)
• TeeJet 844
• MidTech98 (e.g. TeeJet 854, does not include TASC series)
• TeeJet Teton
• BoomPilot in Reverse - Supports optional Reverse Sense module that allows BoomPilot to operate while the machine is traveling in reverse
• Jobs can be started with Automatic Section Control in Automatic mode
• Language Update version distinction in About screen
• Remaining disk space noted on About screen
• Upload software to SDM on CAN
• Additional options added to Units Converter
• Selectable Job Information on guidance screens additions of Target Rate and Actual Rate
• Selectable on screen map displays including Where-applied coverage, prescription map zones, Target Rate, and Actual Rate
• Languages available: English-US and English-International
• Updated PDF, SHP, and KML reports to include new map options
• Support for new tips including new images and updated, coordinated colors
98-01430-ENUS R16
T EE JE T T EC H N OLO G IE S
• Show guideline name after activating next guideline
• X-Track error value can be customized, and can display greater resolution
Fixes:
• Approach to guideline when first engaging FieldPilot on each pass improved
• Ground speed now displayed when in Reverse
Matrix Pro GS v3.05 Language Update
September 2014
New Feature:
• Added Lithuanian language
Fix:
• Updated all other languages
Matrix Pro GS v3.05
April 2014
Fix:
• Update to support Production requirements
Matrix Pro GS v3.04
October 2013
Fix:
• Unlock code issues
Matrix Pro GS v3.03
September 2013
Fix:
• USB Drive application support updated to enhance Technical Support & Production requirements:
Matrix Pro GS v3.02
September 2013
New Features:
• Three implement types:
• In Straight mode – the boom sections have no length and are on a line a fixed distance from antenna
• In Spreader mode – a virtual line is created in line with the delivery disks from which the application section or sections can vary in length and can be at
different distances from the line (available only through an unlock code)
• In Staggered mode – a virtual line is created in line with Section 1 from which the application section or sections have no length and can be at different
distances from antenna
• Machine settings profiles – used to transfer machine settings profiles (delete, import, export) and manage machine settings profiles (create a new profile,
copy a profile, delete a profile, save the current profile to the selected profile or load the selected profile)
• Implement Offset – used to enter the distance and direction from the GPS antenna to the center of the implement on machines where the implement is not
centered relative to the GPS antenna location
• GPS configuration option: PRN – allows optional manual selection of the SBAS PRN used for GNSS differential correction data
• Droplet Size Monitor – When a Pressure Sensor Interface Kit is present, Matrix GS provides real time sensing and displaying of droplet size
• Enhanced application control
• On-screen ABSC switch – No more need for Work On/Off Switch on single boom machines
• Applied Area Alarm – used to establish an alert to signal when exiting or entering an applied area without BoomPilot on the system
• Enhanced screen features
• Increased viewing space in Vehicle View Guidance and Field View Guidance
• Three new screen color schemes
• Simplified access to setup options with scrolling screens
• Camera Image Capture in RealView Guidance
• Press and drag panning now in Field View Guidance
• Guidance options on transparent background
• Increased information availability on guidance screens
• Coverage area displayed on Home pages and Status Bar pop-outs
• Tilt Correction Status now on Status Bar
• Video configuration options available with direct-connect camera
• Image from single camera on 840 can now be flipped without adding VSM
• Added Bulgarian language
• FieldPilot remains engaged when GNSS Quality Indicator changes from 4-to-5 and 5-to-4
Fixes:
• Chinese and Japanese languages supported in reports
www.teejet.com
R ELE A SE NOTE S
• Enhanced ABSC Performance
• Enhanced application control gives more accurate boundary mapping
• More elegant handling of data from non-adjacent UTM zones
M AT R I X P R O
Matrix Pro v2.50
March 2013
New Feature:
• Same functionality as v2.04 but on new GS hardware.
Matrix Pro v2.05
January 2015
Fix:
• Changed icons with text (ex: Mark A, Camera A) to icons that do no include font usage.
Matrix Pro v2.04
June 2012
New Features:
• Job data including boundaries, guidelines and application can be duplicated into a new job directly in the Matrix Pro console – no need to use Fieldware®
Link.
• Added auto steering support for Steering Angle Sensor (SAS) – requires SCM v10.03
• Added console languages Japanese, Finnish, Romanian, Estonian, Serbian and International English
• Added method to ensure tilt data is stable before locking in Field Level calibration values from TGM and SCM – requires SCM v10.03
• Added UniPilot® to AutoSteer setup – requires SCM v10.03
Fixes:
• Client\Farm\Field\Job data fields now populated in pdf job report
• Irregular exit procedure from job no longer creates invisible applied area between consecutive jobs
• Tilt Gyro Module no longer identified as TCM in ‘About‘ page
• Numerous changes to languages
Matrix Pro v2.03
November 2011
New Feature:
• Enhanced guideline acquisition of FieldPilot® systems after making headland turns
Fixes:
• Help text for ABSC on and off delays corrected
• FieldPilot valve test sequence terminated when user exits Max Duty Cycle settings page
• AutoSteer valve test timer increased from 10 to 15 seconds
Matrix Pro v2.02
September 2011
New Feature:
• Add new Style Sheet (color scheme) similar to v1.04
Fixes:
• Stopped application from reconfiguring some external GPS receivers when Receiver Type was set to ‘External’
• Problem with pdf reports & kml files when set to Russian language and Metric units corrected
• Missing Russian translations in some screens corrected
98-01430-ENUS R16
R EL EA SE N OTE S
Matrix Pro v2.01
May 2011
Fix:
• Change to recognize new GPS receiver version strings
Matrix Pro v2.00
April 2011
New Features:
• New User Interface
• Support GLONASS option GPS receiver
• Application Reports
• Companion PC application – FieldWare® Link
• Guidance:
• A+ Azimuth Guidance mode
• NextRow Guidance mode
• Created independent widths for guidance and product application
• Multiple Guideline Support
• Folded Boom mode for headland spraying
• Vehicle Trajectory Indicator
• Field Finder
• Internal boundaries for ABSC
• Auto Steering:
• Requires SCM v10.00
• Added valve diagnostic page
• 3-state Steering Status display
• Improved Video Configuration page
• Calculator tool
• Units converter tool
• Chinese language support
M AT R I X
Matrix v1.05
January 2011
New Feature:
• Added capability to display OEM Splash Screens prior to launch of application
Matrix v1.04
May 2010
New Feature:
• Global release of Matrix application for 570G & 840G
www.teejet.com
98-01430-ENUS R16 English
© TeeJet Technologies 2017
Download PDF