EdgeAccess® Universal
Chassis System
The EdgeAccess ® Universal Chassis
System (UCS) is a carrier class system
accommodating a mix of fiber optic
Modems, Multiplexers, LAN extension
devices, WDMs, and Converters. Service
Providers can offer multiple fiber optic
based services with speeds of 1.544Mbps
up to Gigabit, cost effectively from a
commonly managed platform. Multiple
low-speed and/or high-speed circuits can
be run in parallel over a single fiber pair
utilizing integrated WDM technology.
Hot-swappable modules provide a variety
of interface options and flexibility of
service offerings, ease of troubleshooting, and reduced cost of ownership.
Key Features
• Fully modular Carrier-Class Chassis
System
• Fault Tolerant and Redundant
• Cost Effective - Low Entry Price
• Extensive Modularity for Flexibility
and Reduced Cost of Ownership
• Up to 15 Hot-swappable Modules in
One Chassis
Chassis
Model 1000
The UCS Model 1000 chassis provides
facility and management functions for
Canoga Perkins' new generation rackmount
product lines: Modem, Multiplexer, LAN
extension, WDM, and Converter modules.
The chassis' mechanical design accommodates up to 15 hot-swappable modules,
single or redundant power supplies, and up to
four levels of optional management. Up to 8
chassis can be linked, resulting in a fully managed domain of up to 240 local and remote
modules. The chassis backplane provides a
common interface for all modules, allowing
redundancy and interchangeability. Optical and
electrical interfaces on all modules are also hotswappable. Major and minor alarms from any
module can be routed through the optional
Chassis Interconnect Module to an external alert
device.
Up to 8 Chassis can be linked,
providing central management
for up to 240 local and remote
modules with one IP address.
Chassis Interconnect Module
Model 1200
The Chassis Interconnect Module (CIM) collects information from all
modules in the chassis and cascades up to eight chassis into one
domain. Major and minor alarms are aggregated from all modules, the
external fan tray, a power supply in the chassis, or from any chassis
within a domain. These alarms are sent to relays on the front of the
CIM for local audio and visual notification. The CIM also forwards all
alarm and status information to the Domain Management Module
(DMM) and provides a redundant clock for the management bus.
Key Features
•
Allows Cascading of up to Eight Chassis into
One Alarm and Management Domain
•
•
Collects Module, Fan, and Power Supply Alarm Status
Aggregates Major and Minor Alarm Relays for Local
Notification of Faults
•
•
Provides a Redundant Clock to the Management Bus
Provides Fan Tray Power and Monitoring
Power Supply Options
The UCS can be ordered with several power supply
options, guaranteeing redundancy of power. Both AC
and DC power can be configured for the same
chassis. The chart below describes the number of
modules permitted with each type of power
configuration.
AC Power
Supply
0
1
1
2
DC Power
Supply
1 or 2
0
1
0
Maximum
Modules
15
14
13
12
UCS Management Options
Level 1: Directly attach to selected modules via
EIA-232 terminal interface. This module and its
remote mate can then be managed independently of
the chassis.
Level 2: Adding a CIM to the chassis, which will
aggregate major and minor alarms from all modules
and the power supplies.
Level 3: Adding the DMM to the chassis. The DMM
offers full VT100 Terminal or 10BASE-T/SNMP
management of all aspects of the chassis, the
modules within, and the associated remote devices.
Level 4: Redundant DMMs within a group of up to
eight chassis.
Domain Management Module
Model 1500
The Domain Management Module (DMM) provides the network manager with a single IP
addressable window into the operation, status and configuration of every module
within the UCS domain. Most modules are accessible to the manager, including modules
in other chassis that are linked via the CIM, as discussed previously. Supervisory and
management actions can be remotely controlled via 10BASE-T interface, SNMP, as well
as SLIP/PPP terminal connections.
Software upgrades for the DMM are obtainable via the Canoga Perkins Website, CD-ROM,
or e-mail, and then archived in the DMM Software Librarian. The librarian stores, tracks
and distributes the software revision to any or all modules.
Key Features
• Up to 8 Chassis and Up to 240 Local and
Remote Modules Managed by a Single
DMM (Domain Management Module)
• Canoga Perkins Side-Band Management
Channel (SBMC) for Remote Unit Access
• 10BASE-T (RJ48) & Serial EIA-232 with
DE-9 Interface (DTE or DCE) for Modem
or Terminal Attachment
• SLIP, PPP, BOOTP, SNMP, Telnet
• Extensive Private MIB
• Communicate Directly to Modules
Through the DMM for Full Control of
Entire System
• TFTP Download of Software Upgrades for
DMM and Local/Remote Modules
• Software Module Libraries Allow Easy
System Upgrades
• Simple Setup of Virtual Groups Allows
for Commands & Upgrade on Groups
of Modules
• Two Telnet Sessions Supported
UCS Management Structure
UCS Specifications
Chassis
Switch
Reset Alarm Relay
Physical
Dimensions
8.75’’H X 19”W X 11.75”D
(222 X 482 X 298mm)
Connectors
Alarm Relays
Major alarm
Normally Open/Closed
Weight
12 lbs (5.5kg)
Minor alarm
Normally Open/Closed
Power
Chassis Link
AC power supply
150W
90 to 264VAC @ 2A Max. 50/60Hz input
DC power entry module
150W
-36 to -58VDC @ 4A Max. input
Operating Environment
Temperature
0-50oC with fan tray
Humidity
10 to 95% (non-condensing)
Chassis Interconnect Module
Physical
Dimensions
5.1”H X .9”W X 10.4”D
(130 X 23 X 264mm)
Weight
LEDs
=
=
=
=
=
=
=
Fan
Fan Tray Connector Output
-48VDC, 400mA Max.
Domain Management Module
Physical
Dimensions 3.75”H X .9”W X 10.4”D
(95 X 23 X 264mm)
Weight
7 oz (.2kg)
LEDs
STA - Green
Amber
Red
ACT - Green
LNK - Green
Rx - Green
=
=
=
=
=
=
Normal
Blinking boot-up self-test
Non operational
Management activity
Ethernet 10BASE-T link up
Ethernet 10BASE-T receive activity
Switches
9 oz. (.25kg)
STA - Green
Amber
Red
MAJ - Red
MIN - Amber
CLK - Green
Red
Proprietary 8-pin Modular
Normal
Alarm relay latched
Non-operational
Major alarm detected
Minor alarm detected
Active clock source
Clock source failed
Canoga Perkins Corporation
Terminal or Modem
MDX/MDI
Management Module Reset
Connectors
MDM/TRM - EIA-232, Modem/Terminal
MDX/MDI - 10BASE-T, Cross Over/Straight
Regulatory Compliance
UL 1950, CSA C22.2 No.950, IEC 60950
FCC Part 15 Class A, AS/NZS 3548
FCC Part 68, CTR 12, CTR 13, NTR 4, TS 016
NEBS Level 3
World Headquarters
20600 Prairie Street
Chatsworth, CA 91311-6008
(818)718-6300 Fax (818)718-6312
Web Site: www.canoga.com
Specifications are subject to change without notice. All products or services
mentioned herein are the trademarks, service marks, registered trademarks,
or registered service marks of their respective owners.
6052200 Rev C
Download PDF