SAS Cable
SAS Cable Internal, Mini SAS 36-pin to SAS 29-pin,
Black 50 cm
Connect with confidence.
SAS cables, mark a major milestone in the evolution of high-end storage products. SAS architecture
offers a new level of price/performance flexibility for the system builder by supporting both SAS
and serial ATA (SATA) disk drives and components at data rates of up to 3 Gbps. MANHATTAN®
meets your needs with a variety of SAS cable products.
Securing Your High-End Storage Connections
You can have the best hard drives, the latest controllers, the fastest processors built into your drive bays — but without
cables, you have nothing. MANHATTAN connects you to your high-end storage solutions. The mini SAS 36-pin
internal connector allows four SAS or SATA drives to be connected to an SAS back plane.
Stepping Past the SCSI Confusion
SAS provides a simple point-to-point SCSI solution. This allows for easy setup with fewer cable runs, and aids
in keeping systems cool due to smaller and fewer cables, thus increasing the reliability of your storage solutions.
MANHATTAN knows that cables are a core of any system, and offers you the best in SAS cable solutions.
Quality Construction
Nickel-plated contacts combine with quality construction to make a high-bandwidth, state-of-the-art
connection between your controller and your data. This single cable solution reduces connection cost and
eliminates tangled cables for easy and quick installation.
Lifetime Warranty
Strict manufacturing standards ensure the highest quality in all MANHATTAN products. All items
carry a full Lifetime Warranty — the strongest quality commitment anyone can make.
• Internal mini-SAS 36-pin (SFF-8087) connector host connection
• Internal SAS 29-pin (SFF-8482) connections (4)
• Point-to-point SCSI makes setting up SCSI easier than ever
• Thinner SAS cables increase cooling and airflow compared to
older parallel SCSI cables
• Multiple lanes support current speeds of up to 3.0 Gbps
through a single cable
• Lifetime Warranty
• UL
• SAS-2
• Supports 3 Gbps data rate
• Future growth to 10 Gbps
• 1 x mini-SAS 36-pin (SFF-8087)
• 4 x SAS 29-pin (SFF-8482)
• 4 x Molex 4-pin connections
• Nickel plated
• 30 AWG connectors
• Shielded (aluminum and mylar braid)
• Matched-impedance design (100
Ohm +/- 10%)
• Withstanding voltage: 300 V DC
• Insulation resistance: 20 MOhms
• Contact resistance: 20 Ohms
• Length: 50 cm (19.6 in.)
• Weight: 99.2 g (3.5 oz.)
Package Contents
• Hi-Speed USB 2.0 Adapter, USB
type-A male to USB mini type-B female
• Reference guide
For more information on MANHATTAN products, consult your
local dealer or visit
Copyright © MANHATTAN
All names of products or services mentioned herein are trademarks or registered trademarks of their respective owners. Distribution and reproduction of this document, and use and disclosure of
the contents herein, are prohibited unless specifically authorized.
Download PDF