Programming the Mirage Remote Timer.
To set the time, hold down the function arrow keys and using the buttons below each display
(DAY, HOURS, MINUTES) advance the timer to the correct time and day. Release the keys. The time is now set.
by Mode
Remote Timer RT-00-10
DAY
HOURS MINUTES
SCENE
PREVIEW
1. To enter programming, hold down the function arrow keys and
type down-up-down-up using the preview keys
Release the keys. You are now in Programming Mode.
The function LEDs light to indicate this.
AUTO
COPY FROM
ADD
COPY TO
DELETE
QUIT
FUNCTION
MANUAL
ENTER
MODIFY
TIME ADJUSTMENT
Press the function and keys together. Whilst these keys
are pressed, adjust the day, hour or minute as required.
Release the keys.
CONNECTION
Connect +5V, Data and 0V terminals in line with Mirage
Scenario or Quartet system.
IMPORTANT
Isolate supply before removing cover.
Complies with EC, EMC and Low Voltage Directives.
MODE LIGHTING (UK) LIMITED
Chelsing Lodge, Tonwell, Ware, Hertfordshire, England.
Telephone: +44 (0)1920 462121 Fax: +44 (0)1920 466882
by Mode
Remote Timer RT-00-10
DAY
HOURS MINUTES
SCENE
PREVIEW
COPY FROM
ADD
COPY TO
DELETE
AUTO
QUIT
FUNCTION
MANUAL
ENTER
MODIFY
TIME ADJUSTMENT
Press the function and keys together. Whilst these keys
are pressed, adjust the day, hour or minute as required.
Release the keys.
CONNECTION
Connect +5V, Data and 0V terminals in line with Mirage
Scenario or Quartet system.
IMPORTANT
Isolate supply before removing cover.
Complies with EC, EMC and Low Voltage Directives.
MODE LIGHTING (UK) LIMITED
Chelsing Lodge, Tonwell, Ware, Hertfordshire, England.
Telephone: +44 (0)1920 462121 Fax: +44 (0)1920 466882
2. To ADD a scene change, hold down the function arrow keys
and press the ADD button. Release the keys.
The ADD function LED lights to indicate the mode selected.
Using the buttons below each display,
advance the display to the required
day, time and
scene required. Press the enter button.
Repeat above procedure for all time changes
r e q u i r e d
f o r
t h a t
d a y .
3. To Copy the settings from one day to another, hold down the function arrow keys
and press the COPY FROM button. Release the keys.
The COPY FROM function LED lights to indicate the mode selected.
Using the buttons below the DAY display scroll to the DAY you
w i s h
t o
c o p y
a n d
p r e s s
E N T E R .
H o l d
d o w n
t h e
f u n c t i o n
a r r o w
k e y s
and press the COPY TO button. Release the keys.
The COPY TO function LED lights to indicate the mode selected.
Using the buttons below the DAY display scroll to the DAY you
wish to copy the information to and press ENTER.
by Mode
Remote Timer RT-00-10
DAY
HOURS MINUTES
SCENE
PREVIEW
COPY FROM
ADD
COPY TO
DELETE
AUTO
QUIT
FUNCTION
MANUAL
ENTER
MODIFY
TIME ADJUSTMENT
Press the function and keys together. Whilst these keys
are pressed, adjust the day, hour or minute as required.
Release the keys.
CONNECTION
Connect +5V, Data and 0V terminals in line with Mirage
Scenario or Quartet system.
IMPORTANT
Isolate supply before removing cover.
Complies with EC, EMC and Low Voltage Directives.
MODE LIGHTING (UK) LIMITED
Chelsing Lodge, Tonwell, Ware, Hertfordshire, England.
Telephone: +44 (0)1920 462121 Fax: +44 (0)1920 466882
4. To MODIFY a setting, hold down the function arrow keys and press the MODIFY button. Release the keys.
The MODIFY function LED lights to indicate the mode selected. Using the preview buttons
scroll to the time and scene change you wish to MODIFY Using
the buttons below the displays adjust the setting as required. Press ENTER. The change has now been Modified.
5. To DELETE a setting, hold down the function arrow keys and press the DELETE button. Release the keys.
The DELETE function LED lights to indicate the mode selected. Using the preview buttons
scroll to the time and scene change you wish to DELETE. Press ENTER. The scene change has now been deleted.
6. To Exit programming, hold down the function arrow keys and press the EXIT button. Release the keys.
The Timer will now return to normal operation and the display will show the last change made by the timer.
7. Pressing the Manual button on the timer will turn the Automatic function off. The timer will still run through its
programs but will not adjust the lighting. Pressing the AUTO button will resume timed operation of the RT-00-10.
Download PDF