Infotainment manual - Mokka, v.8 (rev ), en-GB

OPEL MOKKA
Infotainment Manual
Contents
Navi 950 / CD 600 ......................... 5
CD 450 / 400 ................................ 79
Navi 950 / CD 600
Introduction .................................... 6
Basic operation ............................ 16
Radio ........................................... 23
CD Player .................................... 29
External devices .......................... 31
Navigation .................................... 36
Speech recognition ...................... 53
Phone .......................................... 62
Frequently asked questions ......... 71
Index ............................................ 74
6
Introduction
Introduction
General information ....................... 6
Theft-deterrent feature ................... 7
Control elements overview ............ 8
Usage .......................................... 14
General information
The Infotainment system provides
you with state-of-the-art in-car
infotainment.
The radio can easily be used by
registering a large number of FM, AM
and DAB (Digital Audio Broadcasting)
radio stations with the 1...6 preset
buttons.
You can connect external data
storage devices, e.g. iPod, USB
devices, or other auxiliary devices to
the Infotainment system as further
audio sources; either via cable or via
Bluetooth.
The navigation system with dynamic
route planning will reliably guide you
to your destination, and, if desired,
automatically avoid traffic jams or
other traffic problems.
In addition, the Infotainment system is
equipped with a phone application
that allows for comfortable and safe
use of your mobile phone in the
vehicle.
Optionally, the Infotainment system
can be operated using the instrument
panel controls, the controls on the
steering wheel or the speech
recognition function.
The well-thought-out design of the
control elements and the clear
displays enable you to control the
system easily and intuitively.
Information on operation details and
news on software updates can be
obtained on our website.
Note
This manual describes all options
and features available for the
various Infotainment systems.
Certain descriptions, including those
for display and menu functions, may
not apply to your vehicle due to
model variant, country
specifications, special equipment or
accessories.
Introduction
Important information on
operation and traffic safety
9 Warning
The Infotainment system must be
used so that the vehicle can be
driven safely at all times. If in
doubt, stop the vehicle and
operate the Infotainment system
while the vehicle is stationary.
9 Warning
The usage of the navigation
system does not release the driver
from the responsibility for a
correct, vigilant attitude in road
traffic. The related traffic
regulations must always be
followed.
Only make entries (e.g.
addresses) with the vehicle
stationary.
If a navigation instruction
contradicts traffic regulations, the
traffic regulations always apply.
9 Warning
Areas such as one-way streets
and pedestrian zones are not
marked on the navigation system
map. In such areas, the system
may issue a warning that must be
accepted. Therefore, pay
particular attention to one-way
streets and other roads and
entrances that must not be driven
into.
Radio reception
Radio reception may be disrupted by
static, noise, distortion or loss of
reception due to:
● changes in distance from the
transmitter
● multi-path reception due to
reflection
● shadowing
Theft-deterrent feature
The Infotainment system is equipped
with an electronic security system for
the purpose of theft deterrence.
7
The Infotainment system therefore
functions only in your vehicle and is
worthless to a thief.
8
Introduction
Control elements overview
Navi 950
Introduction
1
;
2
Access Home Page .............. 16
Station buttons 1...6
Short press: select station .... 25
CD/MP3/WMA: skip track
forwards ................................ 30
7
External devices: skip
track forwards ....................... 33
T
3
Long press: save station ....... 25
DEST / NAV
CD/MP3/WMA: start/
pause playback ..................... 30
4
Open navigation
destination menu .................. 41
s
8
External devices: start/
pause playback ..................... 33
FAV 1-2-3
9
Open favourites list ............... 25
AS 1-2
Radio: search backwards ..... 23
CD/MP3/WMA: skip track
backwards ............................. 30
5
External devices: skip
track backwards .................... 33
m VOL
Press: switch on/off
Infotainment system .............. 14
6
Turn: adjust volume .............. 14
u
Radio: search forwards ......... 23
Short press: open
autostore list .......................... 24
Long press: save
autostore stations
automatically ......................... 24
10 TP
Activate or deactivate
radio traffic service ................ 26
11 d
Eject CD ................................ 30
9
12 CONFIG
Open settings menu .............. 20
13 INFO
Radio: information on
current station
CD/MP3/WMA, external
devices: information on
current track
Navigation: information,
e.g. on current location
14 Multifunction knob
Turn: mark menu options
or set alphanumeric values . . 16
Press (outer ring): select/
activate the marked
option; confirm set value;
switch function on/off;
open audio or navigation
menu ..................................... 16
15 Eight-way switch
Navigation: move display
window in map view .............. 37
10
Introduction
16 BACK
Menu: one level back ............ 16
Input: delete last character
or entire entry ........................ 16
17 RPT / NAV
Repeat last navigation
message ............................... 49
18 CD slot .................................. 30
19 O
Take phone call or
activate/deactivate mute ....... 65
20 NAV
Display map ......................... 37
21 SRCE (Source)
Press to toggle through the
different audio sources
CD/MP3 player ...................... 29
USB ....................................... 31
AUX ....................................... 31
Bluetooth ............................... 31
AM ......................................... 23
FM ......................................... 23
DAB ....................................... 23
Introduction
CD 600
11
12
Introduction
1
;
6
FAV 1-2-3
2
Access Home Page .............. 16
Station buttons 1...6
7
Open favourites list ............... 25
AS 1-2
Turn: mark menu options
or set alphanumeric values . . 16
Short press: open
autostore list .......................... 24
Press: select/activate the
marked option; confirm set
value; switch function on/
off; open audio menu ............ 16
13 BACK
Long press: save station ....... 25
3
Short press: select station .... 25
s
8
Long press: save
autostore stations
automatically ......................... 24
TP
9
Activate or deactivate
radio traffic service ................ 26
d
Input: delete last character
or entire entry ........................ 16
14 Tone
Eject CD ................................ 30
10 CONFIG
Open tone settings ................ 18
15 CD slot .................................. 30
16 O
Radio: search backwards ..... 23
CD/MP3/WMA: skip track
backwards ............................. 30
4
External devices: skip
track backwards .................... 33
m VOL
Press: switch on/off
Infotainment system .............. 14
5
Turn: adjust volume .............. 14
u
Radio: search forwards ......... 23
CD/MP3/WMA: skip track
forwards ................................ 30
External devices: skip
track forwards ....................... 33
12 Multifunction knob
Open settings menu .............. 20
11 INFO
Radio: information on
current station
CD/MP3/WMA, external
devices: information on
current track
Menu: one level back ............ 16
Take phone call or
activate/deactivate mute ....... 65
17 T
CD/MP3/WMA: start/
pause playback ..................... 30
External devices: start/
pause playback ..................... 33
Introduction
18 SRCE (Source)
Steering wheel audio controls
With radio active: turn up/
down to select next/
previous preset radio
station ................................... 23
Press to toggle through the
different audio sources
CD/MP3 player ...................... 29
With CD player active: turn
up/down to select next/
previous CD/MP3/WMA
track ...................................... 30
USB ....................................... 31
AUX ....................................... 31
Bluetooth ............................... 31
With external device
active: turn up/down to
select next/previous track ..... 33
AM ......................................... 23
FM ......................................... 23
DAB ....................................... 23
13
1
With phone active: turn up/
down to select next/
previous entry in call list ........ 65
qw
Short press: take phone call . 65
3
With phone active and
calls waiting: turn up/down
to switch between calls ......... 65
w
4
Increase volume .................... 14
─
5
Reduce volume ..................... 14
xn
or dial number in call list ....... 65
or activate speech
recognition ............................ 53
Long press: show call list ...... 65
2
or activate voice pass-thru
(if supported by phone) ......... 53
SRC (Source)
Press: select audio source .... 23
Short press: end/decline
call ......................................... 65
14
Introduction
or close call list ...................... 16
Usage
or activate/deactivate mute ... 14
Control elements
or deactivate speech
recognition ............................ 53
The Infotainment system is operated
via function buttons, a multifunction
knob and menus that are shown on
the display.
Inputs are made optionally via:
● the central control unit on the
instrument panel 3 8
● controls on the steering wheel
38
● the speech recognition system
3 53
Note
Only the most direct ways for menu
operation are described in the
subsequent chapters. In some
cases, there may be other options.
Switching the Infotainment
system on or off
Press X briefly. After switching on,
the last selected Infotainment source
becomes active.
Automatic switch-off
If the Infotainment system is switched
on pressing X while the ignition is
switched off, it switches off again
automatically after 10 minutes.
Setting the volume
Turn X. The current setting is shown
in a pop-up at the bottom of the
screen.
When the Infotainment system is
switched on, the last selected volume
is set, provided that the volume is
lower than the maximum start-up
volume.
The following volume settings can be
set separately:
● the maximum start-up volume
3 19
● the volume of the traffic
announcements 3 19
● the volume of the navigation
messages 3 37
Introduction
Auto volume
When auto volume is activated
3 19, the volume is adapted
automatically to compensate for the
road and wind noise as you drive.
Mute
Press O (if Phone portal is
available: press for a few seconds) to
mute the audio sources.
To cancel mute again, turn X VOL or
press O again (if Phone portal is
available: press for a few seconds).
Volume limitation at high
temperatures
At very high temperatures inside the
vehicle, the Infotainment system
limits the maximum adjustable
volume. If necessary, the volume is
decreased automatically.
Modes of operation
Audio players
Repeatedly press SRCE to toggle
between the AM, FM, CD, USB, AUX,
Bluetooth or DAB main menus.
For detailed descriptions of:
● CD/MP3 player 3 29
● USB port 3 31
● AUX input 3 31
● Bluetooth audio 3 31
● AM radio 3 23
● FM radio 3 23
● DAB radio 3 27
Navigation
Press NAV to display the map of the
navigation application.
Press the multifunction knob to open
a submenu with options for the input
of destinations and the structuring of
a route.
For a detailed description of the
navigation functions 3 36.
Phone
Press O to display the phone main
menu with options for the input or
selection of numbers.
For a detailed description of the
mobile phone functions 3 62.
15
Note
Brief information on the audio
sources and the current navigation
session may be displayed via the
Quick Info application.
16
Basic operation
Basic operation
Basic operation
Multifunction knob
Basic operation ............................ 16
Tone settings ............................... 18
Volume settings ........................... 19
System settings ........................... 20
The multifunction knob is the central
control element for the menus.
Turn the multifunction knob:
● to mark a menu option
● to set an alphanumeric value
Press the multifunction knob
(Navi 950: press the outer ring):
● to select or activate the marked
option
● to confirm a set value
● to switch a system function on/off
● to open the audio or navigation
menu within the respective
application
; button
Press ; to access the Home Page.
Using the multifunction knob, you
may then access the different
applications.
Turn the multifunction knob to select
More at the bottom of the screen.
Basic operation
Press the multifunction knob
(Navi 950: press the outer ring) to
display the second Home Page with
further applications.
Using the multifunction knob, you
may then access the different
applications.
Note
Most of the applications or
application menus may also be
directly accessed via the buttons on
the instrument panel.
BACK button
Press BACK:
● to exit a menu or screen
● to return from a submenu to the
next higher menu level
● to delete the last character in a
character sequence
Press and hold BACK for a few
seconds to delete the entire entry.
Examples of menu operation
Selecting a screen element
Turn the multifunction knob to move
the cursor (= coloured background) to
the desired option.
Press the multifunction knob to select
the marked icon, screen button or
menu item.
Note
In subsequent chapters the
operating steps for selecting and
activating a screen button or menu
item will be described as "...select
<button name>/<item name>".
17
If there are more menu items
available in a list than presentable on
the screen, a scroll bar is displayed.
Turn the multifunction button
clockwise to scroll downwards and
anticlockwise to scroll upwards.
Note
In subsequent chapters the
operating steps for scrolling to a list
item will be described as "...scroll to
<item name>".
Adjusting a setting
Scrolling lists
Turn the multifunction knob to change
the current value of the setting.
18
Basic operation
Press the multifunction knob to
confirm the set value.
Note
In subsequent chapters the
operating steps for adjusting a
setting will be described as "...adjust
<setting name> to...".
Activating a menu item
Turn the multifunction knob to move
the cursor (= coloured background) to
the desired option.
Press the multifunction knob to
activate the menu item. A checkmark
or a point appear within the box or ring
beside the respective menu item.
Note
In subsequent chapters the
operating steps for activating a
menu item will be described as
"...activate <item name>".
Entering a character sequence
Turn the multifunction knob to select
the desired character.
Press the multifunction knob to enter
the respective character in the entry
field at the top of the screen.
The last character in the character
sequence can be deleted by selecting
Del on the screen or pressing BACK
on the instrument panel. Pressing
and holding BACK deletes the entire
entry.
Press the multifunction knob to
confirm the selected character.
Note
In subsequent chapters the
operating steps for entering
characters will be described "...enter
the desired characters...".
Messages
Before a system function is executed,
you are sometimes prompted with a
message. If requested, select one of
the options.
The selection and activation of a
screen button in a message function
are the same as described for
selecting an option in a menu.
Tone settings
Press ; and then select More at the
bottom of the screen. On the second
Home Page, select Tone. The tone
settings menu is displayed.
Basic operation
19
Treble
Use this setting to enhance or
attenuate the high frequencies of the
audio sources.
Adjust the setting as desired.
EQ mode
Bass
Use this setting to enhance or
attenuate the deep frequencies of the
audio sources.
Adjust the setting as desired.
Mid
Use this setting to enhance or
attenuate the midrange frequencies
of the audio source.
Adjust the setting as desired.
(EQ: Equaliser)
Use this setting to optimise the tone
for a specific style of music, e.g.
Rock or Classical.
Select EQ. A submenu with
predefined sound styles is displayed.
Select the desired sound style.
If one of the predefined sound styles
is selected, Bass, Mid and Treble are
preadjusted by the system.
If you manually adjust one of the
settings described above, EQ is set to
Manual.
Fade and Balance
When Fade or Balance are selected,
an illustration is displayed on the right
side of the screen.
To adjust the volume distribution
between the front and rear speakers
in the vehicle, select Fade. Adjust the
setting as desired.
To adjust the volume distribution
between the left and right speakers in
the vehicle, select Balance. Adjust
the setting as desired.
Volume settings
Adjusting the Auto Volume
Press CONFIG and then select Radio
Settings.
Select Auto Volume to display the
respective menu.
20
Basic operation
To adjust the degree of volume
adaptation, set Auto Volume to Off,
Low, Medium or High.
Off: no enhancement of volume with
increasing vehicle speed.
High: maximum enhancement of
volume with increasing vehicle
speed.
Adjusting the Startup Volume
Press CONFIG and then select Radio
Settings.
Select Startup Volume to display the
respective menu.
Adjust the setting as desired.
Adjusting the volume of traffic
announcements
The volume of traffic announcements
can be preset to a level independent
of the "normal" volume level.
Press CONFIG and then select Radio
Settings.
Select RDS Options and then Traffic
Volume to display the respective
menu.
Adjust the setting as desired.
Note
While an announcement is being
broadcasted, the volume can be
adjusted by turning m.
Adjusting the Chime Volume
When operating the controls in the
vehicle, beeping sounds confirm your
actions. The volume of the beeping
sounds may be adjusted.
Press CONFIG and then select
Vehicle Settings.
Select Comfort and Convenience and
then Chime Volume to display the
respective submenu. Select Low or
High.
Adjusting the Navigation Volume
Press CONFIG and then select
Navigation Settings.
Select Voice Prompt and then
Navigation Volume. The respective
submenu is displayed.
To adjust the volume of the
announcements, select
Announcement and then adjust the
setting as desired.
To adjust the volume of the audio
source possibly playing in the
background, select Background and
then adjust the setting as desired.
Select Volume Test to get an audio
example of the settings.
Note
While an announcement is being
broadcasted, the volume can be
adjusted by turning m.
System settings
Various Infotainment system settings
may be adjusted via the Config
application.
Basic operation
Language settings
Scroll through the list and select
Software Versions Menu to display
the respective submenu.
Press CONFIG and then select
Languages. A list of all languages
available is displayed.
Select the desired language.
Software version information
To display a list of all software
versions installed, select Software
Version Information.
By default, all versions are activated.
Time and date settings
Press CONFIG and then select Time
and Date to display the respective
submenu.
Automatic time adjustment
The system constantly receives
information on the current time and
date.
If you wish the time and date settings
to be updated automatically, activate
RDS Auto Time Adjust.
If you wish to set time and date
manually, deactivate RDS Auto Time
Adjust.
Set time
To adjust the time settings, select Set
Time.
21
Adjust the settings as desired.
Software update
To update your system software,
contact your workshop.
Set date
To adjust the date settings, select Set
Date. Adjust the settings as desired.
Log file
To generate a log file of your current
software version, select Create Log
File.
Time format
To choose the desired time format,
select 12 hr / 24 hr Format. A
submenu is displayed. Activate 12
Hour or 24 Hour.
Licensing information
To display information on the
manufacturer of the Infotainment
system, select Licensing Information.
Software information
Press CONFIG and then select Radio
Settings.
Factory defaults
To reset all Infotainment settings to
their factory defaults, select Clear and
Reset Radio.
22
Basic operation
Display settings
Press CONFIG and then select
Display Settings to display the
respective submenu.
Home Page
Select Home Page Menu to display
the home page settings menu.
To access the menu from the Home
Page, select Menu at the bottom of
the screen.
The Home Page may be adjusted
according to your personal
preferences.
Customise
The application icons displayed on
the first home page may be chosen as
desired.
Select Customise to display a list of
all applications installed in the
system. Activate the menu items of
those applications you wish to be
displayed on the first home page.
The other applications are then
arranged on the following pages.
Sort
Up to eight application icons may be
arranged on each home page.
The positions of the icons can be
changed as desired.
Select Sort to display the home pages
in edit mode.
Select the icon you wish to move.
Scroll to the position on the home
page where you wish the icon to be
located. Press the multifunction knob
to confirm.
The icon is moved to the new location.
The icon that was located in that
position before is now displayed in the
position of the moved icon.
Home page defaults
To reset the Home Page to its factory
defaults, select Restore Home Page
Defaults.
Display Off
To turn the display off, select Display
Off.
To turn the display back on, press any
button on the instrument panel
(except the m VOL knob).
Radio
Radio
Usage
Activating radio
Usage .......................................... 23
Station search .............................. 23
Autostore lists .............................. 24
Favourite lists ............................... 25
Radio data system (RDS) ............ 26
Digital audio broadcasting ........... 27
Press ; and then select AM, FM or
DAB.
The station last selected is played.
Note
When an audio source is already
active, you may toggle between the
different audio sources by
repeatedly pressing SRCE.
Station search
Automatic station search
Briefly press t or v to play the next
station in the station memory.
Manual station search
Press and hold t or v. Release the
button when the required frequency
has almost been reached on the
frequency display.
Manual station tuning
In the FM and DAB waveband, press
the multifunction knob to open the
respective menu and then select
23
Manual tuning. The frequency
currently active is displayed at the
bottom of the screen.
Turn the multifunction knob to reach
the desired frequency.
In the AM waveband, turn the
multifunction knob to adjust the
frequency.
Station lists
In the FM and DAB waveband, turn
the multifunction knob to display the
station list.
In the AM waveband, press the
multifunction knob to display the
respective waveband menu.
Select AM Station List.
A list of all receivable stations of the
relevant waveband and in the current
reception area is displayed.
Note
If no station list has been created
beforehand, the Infotainment
system performs an automatic
station search.
24
Radio
The Infotainment system stores these
stations in the corresponding
category list sorted by programme
type.
Note
The category list submenu item is
only available for the FM and the
DAB wavebands.
Select the desired station.
Note
The currently received station is
marked by i.
Category list
Numerous RDS 3 26 and DAB
3 27 stations broadcast a PTY
code, which specifies the type of
programme transmitted (e.g. news).
Some stations also change the PTY
code depending on the content which
is currently transmitted.
To search for a programme type
determined by the stations, select the
waveband specific category list
option.
A list of programme types currently
available is displayed.
Select the desired programme type. A
list of stations is displayed
transmitting a programme of the
selected type.
Select the desired station.
Note
The currently received station is
marked by i.
Updating the station lists
If the stations stored in the wavebandspecific station list can no longer be
received, the AM and the DAB station
lists must be updated.
Note
The FM station list is updated
automatically.
Select the corresponding list item in
the waveband-specific menu to
update a station list.
A station search is started. Once the
search is finished, the station
previously selected is played.
To cancel the station search, press
the multifunction knob.
Note
If a waveband-specific station list is
updated, the corresponding
category list is also updated.
Autostore lists
The stations best received in a
waveband can be stored in and
selected from the autostore lists.
Radio
25
Storing stations manually
Stations can also be stored manually
in the autostore lists.
Set the station to be stored.
Press AS to open the autostore list or
to switch to another autostore list.
To store the station in a list position:
press the corresponding station
button 1...6 until a confirmation
message is displayed.
Each waveband has 2 autostore lists
(AS 1, AS 2), in each of which
6 stations can be stored.
Note
The currently received station is
highlighted.
Automatic station storing
Keep AS pressed until an autostore
message is displayed. The
12 strongest stations in the current
waveband are stored in the
2 autostore lists.
To cancel the autostore procedure,
select Cancel.
Note
Manually stored stations are
overwritten in an automatic station
storing process.
Retrieving a station
If required, press AS to open an
autostore list or to switch to another
autostore list.
Press one of the station buttons 1...6
to activate the station at the
corresponding list position.
Favourite lists
Stations of all wavebands can be
stored manually in the favourite lists.
6 stations can be stored in each
favourite list. The number of available
favourite lists can be set (see below).
Note
The currently received station is
highlighted.
Storing a station
Set the station to be stored.
Briefly press FAV to open a favourite
list or to switch to another favourite
list.
To store the station in a list position:
press the corresponding station
button 1...6 until a confirmation
message is displayed.
26
Radio
Retrieving a station
Advantages of RDS
If required, briefly press FAV to open
a favourite list or to switch to another
favourite list. Press one of the station
buttons 1...6 to activate the station
stored in the respective location.
●
Defining the number of favourite
lists
Press CONFIG and then select Radio
Settings. Select Number of Favourite
Pages to display the respective
submenu.
Select the number of favourite pages
you wish to be displayed.
Radio data system (RDS)
RDS is a service of FM stations that
considerably facilitates the finding of
the desired station and its fault-free
reception.
●
●
●
On the display the programme
name of the set station appears
instead of its frequency.
During station search the
Infotainment system tunes in to
RDS stations only.
The Infotainment system always
tunes in to the best receivable
broadcasting frequency of the set
station by means of AF
(Alternative Frequency).
Depending on the station that is
received the Infotainment system
displays radio text that can
contain, for example, information
on the current programme.
RDS Options menu
To open the menu for the RDS
configuration, press CONFIG and
then select Radio Settings.
Select RDS Options to display the
respective submenu.
Activating the RDS function
Activate RDS.
Note
If RDS is deactivated, not all menu
items of the RDS Options menu are
displayed.
Regional
RDS stations sometimes broadcast
regionally different programmes on
different frequencies.
If Regional is activated, only
alternative frequencies (AF) with the
same regional programmes are
selected.
Radio
If Regional is deactivated, alternative
frequencies of the stations are
selected without regard to regional
programmes.
Text Scroll Freeze
Some RDS stations do not only show
the programme service name on the
display, but also additional
information on the current
programme. If additional information
is displayed, the programme name is
hidden.
To prevent additional information
from being displayed, activate Text
Scroll Freeze.
Radio Text
If RDS and the reception of an RDS
station are activated, information on
the radio programme currently active
or the music track currently playing
are displayed below the programme
name.
To show or hide the information,
activate or deactivate Radio Text.
Radio traffic service
(TP = Traffic Programme)
Radio traffic service stations are RDS
stations that broadcast traffic news.
If the radio traffic service is switched
on, radio or media playback is
interrupted for the duration of the
traffic announcement.
Switching the radio traffic service on
and off
To switch the traffic announcement
standby facility of the Infotainment
system on and off, press TP.
● If the radio traffic service is
switched on, [ ] is indicated on the
display.
● If the current station is not a radio
traffic service station, a search is
started automatically for the next
radio traffic service station.
● If a radio traffic service station
has been found, [TP] is indicated
on the display.
27
Traffic announcement volume
To adjust the volume of traffic
announcements, select Traffic
Volume. The respective submenu is
displayed. Adjust the setting as
desired.
Listening to traffic announcements
only
Switch on the radio traffic service and
completely turn down the volume of
the Infotainment system.
Blocking out traffic announcements
To block out a traffic announcement,
e.g. during CD/MP3 playback:
Press TP or select Cancel in the TP
message.
The traffic announcement is
cancelled, but the radio traffic service
remains switched on.
Digital audio broadcasting
DAB broadcasts radio stations
digitally.
28
Radio
General information
●
●
●
●
●
●
DAB stations are indicated by the
programme name instead of the
broadcasting frequency.
With DAB, several radio
programmes (services) can be
broadcasted on a single
ensemble.
Besides high-quality digital audio
services, DAB is also able to
transmit programme-associated
data and a multitude of other data
services including travel and
traffic information.
As long as a given DAB receiver
can pick up the signal sent out by
a broadcasting station (even if
the signal is very weak), sound
reproduction is ensured.
In the event of poor reception, the
volume is reduced automatically
to avoid the output of
disagreeable noises.
Interference caused by stations
that are on nearby frequencies (a
phenomenon that is typical of AM
and FM reception) does not
occur with DAB.
●
●
If the DAB signal is too weak to
be picked up by the receiver, the
system switches over to the
same programme on another
DAB or FM station.
If the DAB signal is reflected by
natural obstacles or buildings,
the reception quality of DAB is
improved, whereas AM or FM
reception is considerably
impaired in such cases.
When DAB reception is enabled,
the FM tuner of the Infotainment
system remains active in the
background and continually
searches for the best receivable
FM stations. If TP 3 26 is
activated, traffic announcements
of the FM station which is
currently best received are
issued. Deactivate TP, if DAB
reception should not be
interrupted by FM traffic
announcements.
DAB announcements
Besides their music programmes, lots
of DAB stations also broadcast
announcements of various
categories.
While being in the DAB main menu,
press the multifunction knob to open
the DAB menu and then select
Announcements.
If you activate some or all categories,
the currently received DAB service is
interrupted when an announcement
of these categories is made.
Activate the desired categories.
CD Player
CD Player
General information ..................... 29
Usage .......................................... 30
General information
Important information about audio
CDs and MP3/WMA CDs
The Infotainment system's CD player
can play audio CDs and MP3/
WMA CDs.
Caution
Under no circumstances place
DVDs, single-CDs with a diameter
of 8 cm or shaped CDs in the audio
player.
You must not put any stickers on
CDs. These discs can get jammed
in the CD drive and ruin the player.
Replacement of the device will
then be necessary.
File formats
Audio CDs
The following CD formats can be
used: CD-ROM Mode 1 and Mode 2;
CD-ROM XA Mode 2, Form 1 and
Form 2.
29
MP3 CDs
The following file formats can be
used: ISO9660 Level 1, Level 2,
(Romeo, Joliet).
MP3 and WMA files written in any
format other than listed above may
not play correctly, and their file names
and folder names may not be
displayed correctly.
The following restrictions apply for the
data stored on an MP3/WMA CD:
Number of tracks: max. 999
Number of folders: max. 255
Folder structure depth:
max. 64 levels (recommended:
max. 8 levels)
Number of playlists: max. 15
Number of songs per playlist:
max. 255
Applicable playlist
extensions: .m3u, .pls, .asx, .wpl
30
CD Player
Usage
Starting CD playback
Push the CD with the labelled side
facing upwards into the CD slot until
it is pulled in.
CD playback starts automatically and
the CD or MP3 CD main menu is
displayed.
If there is already a CD inserted, but
the CD or MP3 CD main menu is not
active, press ; and then select CD.
The CD or MP3 CD main menu is
displayed and CD playback is started.
Depending on the data stored on the
audio CD or MP3 CD, more or less
detailed information on the CD and
the current music track are shown on
the display.
Note
When an audio source is already
active, you may toggle between the
different audio sources by
repeatedly pressing SRCE.
Removing a CD
Press d.
The CD is pushed out of the CD slot.
If the CD is not removed after
ejection, it will be drawn back in again
automatically after a few seconds.
Track List
Turn the multifunction knob to display
a list of all tracks on the CD.
Note
The currently playing track is marked
by i.
Select the desired track.
Function buttons
Skipping to previous or next track
Press t or v once or several times
to skip to the previous or next track.
Fast forwarding or rewinding
Press and hold t or v to fast
forward or rewind the current track.
Pausing playback
Press T to pause playback.
Audio menu
Press the multifunction knob to
display the CD or MP3 menu.
Note
For a description of the functions in
the MP3 menu 3 33.
Shuffle function
To play the tracks on the CD in
random order, activate Shuffle.
To return to the normal playing order,
deactivate Shuffle.
External devices
External devices
General information ..................... 31
Playing audio ............................... 33
Displaying pictures ....................... 34
Using apps ................................... 35
General information
Sockets for the connection of external
devices are located in the centre
console hidden behind a cover.
Note
The sockets must always be kept
clean and dry.
AUX input
It is possible to connect e.g. an iPod,
Smartphone or another auxiliary
device with a 3.5 mm jack plug to the
AUX input. The Infotainment system
can play music files contained in
auxiliary devices.
When connected to the AUX input,
the audio signal of the auxiliary device
is transmitted via the speakers of the
Infotainment system.
The volume can be adjusted via the
Infotainment system. All other control
functions must be operated via the
auxiliary device.
Connecting a device
To connect the auxiliary device to the
AUX input socket of the Infotainment
system, use the following cable:
31
3-pole for audio source.
To disconnect the AUX device, select
another function and then remove the
AUX device.
USB port
An MP3 player, USB device, iPod or
Smartphone can be connected to the
USB port. The Infotainment system
can play music files or display
pictures contained in auxiliary
devices.
When connected to the USB port, the
devices mentioned above can be
operated via the controls and menus
of the Infotainment system.
Note
Not all MP3 players, USB drives,
iPod models or Smartphones are
supported by the Infotainment
system.
Connecting/disconnecting a device
Connect the device to the USB port.
For the iPod, use the appropriate
connection cable.
32
External devices
Note
If a non-readable USB device or
iPod is connected, a corresponding
error message will appear and the
Infotainment system will
automatically switch to the previous
function.
To disconnect the USB device or
iPod, select another function and then
remove the USB storage device.
Caution
Avoid disconnecting the device
during playback. This may
damage the device or the
Infotainment system.
Bluetooth
Bluetooth enabled audio sources
(e.g. music mobile phones, MP3
players featuring Bluetooth, etc.),
which support the Bluetooth music
profiles A2DP and AVRCP can be
connected wirelessly to the
Infotainment system.
The Infotainment system can play
music files contained in Bluetooth
devices, e.g. iPod or Smartphone.
Connecting a device
For a detailed description of the
Bluetooth connection 3 63.
The files must have a maximum size
of 2048 pixels in width and
2048 pixels in height (4MP).
File formats
Gracenote
Audio files
Only devices formatted in the FAT32,
NTFS and HFS+ file systems are
supported.
The Gracenote database contains
information on media data currently
available on the market.
When connecting external devices,
the tracks or files are recognised by
the Gracenote function.
If the Gracenote normalisation
function is activated, spelling
mistakes in MP3 tag data are
automatically corrected. Due to this,
media search results may be
improved.
Press CONFIG and then select Radio
Settings.
Select Gracenote Options to display
the respective submenu.
Activate the Gracenote normalisation
function.
Note
Some files may not be played
properly. This might be due to a
different recording format or the
condition of the file.
Files from online shops to which
Digital Rights Management (DRM)
has been applied cannot be played.
The playable audio file formats
are .mp3, .wma, .aac and .m4a.
When playing a file with ID3 tag
information, the Infotainment system
can display information, e.g. on the
track title and artist.
Picture files
The displayable picture file formats
are .jpg, .jpeg, .bmp, .png and .gif.
External devices
Playing audio
Starting playback
If not connected, connect the device
3 31.
Press ; and then select USB, AUX
or Bluetooth.
Example: USB main menu
Skipping to previous or next track
Press t or v once or several times
to skip to the previous or next track.
Fast forwarding or rewinding
Press and hold t or v to fast
forward or rewind the current track.
Pausing playback
Press T to pause playback.
Audio menus
To display the respective audio
menu, press the multifunction knob.
Note
Not all menu items are available in
all audio menus.
Function buttons
The media files on the USB and
Bluetooth devices may be operated
using the buttons on the instrument
panel.
33
Shuffle function
Press the multifunction knob to
display the USB or Bluetooth menu.
To play the tracks on the respective
device in random order, activate
Shuffle.
To return to the normal playing order,
deactivate Shuffle.
Browsing
(only available in USB menus)
To search for a track within the
structure, select one of the menu
items, e.g. Folders, Play Lists or
Albums.
Browse through the structure until
you find the desired track.
Select the track to start playback.
Individual playlists
The system allows new playlists to be
created via the Gracenote function.
Similar tracks are put together on a
list automatically generated by the
system.
Select the track around which you
wish to create a new playlist.
34
External devices
Select Play More Like This... in the
respective audio menu. A new playlist
is created and stored in the Play
Lists menu.
To delete a playlist generated by the
system, select Delete automatic
playlist. A list of all generated playlists
is displayed. Select the playlist you
wish to delete. The playlist is deleted.
Slide show
To start a slideshow of all pictures
stored in the respective picture folder,
select 6 at the bottom of the screen.
The slideshow is started.
When the slideshow is started, 6
changes to Q.
Select Q to pause the slideshow.
Displaying pictures
Rotating the picture
Select R at the bottom of the screen
to rotate the picture.
Viewing pictures
Connect a USB device 3 31.
Press ; and then select Pictures to
open the Picture Viewer USB menu.
A list of all pictures and picture folders
found on the USB device is displayed.
Browse through the pictures and
folders until you find the desired
picture and select it. The picture is
displayed.
Function buttons
Info button
Select Info at the bottom of the screen
to display information on the picture
stored on the USB device, e.g. a
name or number. The respective
information is displayed above the
picture.
Skipping to the previous or next
picture
Select < or > at the bottom of the
screen to display the previous or next
picture.
Picture menu
To display the picture menu, select
Menu at the bottom of the screen.
Picture Viewer Main
Select Picture Viewer Main to display
a list of all picture folders, see above.
Slideshow Timer
To adjust the time sequence in which
one picture is shown during a slide
show, select Slideshow Timer. The
respective submenu is displayed.
Select the desired option.
External devices
Shuffle Images
To display the pictures of a slide show
in random order, activate Shuffle
Images.
Using apps
Connecting the smartphone
If not connected to the Infotainment
system, connect the smartphone:
● iPod/iPhone: connect the device
to the USB port 3 31.
● Android phone: establish a
Bluetooth connection 3 63.
Downloading the app
Note
Before an approved application can
be operated using the controls and
menus of the Infotainment system,
the respective app must be installed
on the smartphone.
Download the desired app to your
smartphone from the respective app
store.
Starting the app
Press ; and then select the
respective smartphone app icon on
the home screen.
A connection to the application
installed on the smartphone is
established.
The main menu of the app is shown
on the display of the Infotainment
system.
35
36
Navigation
Navigation
General information ..................... 36
Usage .......................................... 37
Destination input .......................... 41
Guidance ..................................... 49
General information
The navigation application will reliably
guide you to your destination without
the need to read maps.
The current traffic situation is taken
into account in the route calculation.
For this reason, the Infotainment
system receives traffic
announcements in the current
reception area via RDS-TMC.
The navigation application cannot,
however, take into account traffic
incidents, traffic regulations changed
at short notice and hazards or
problems that arise suddenly (e.g.
road works).
Caution
The usage of the navigation
system does not release the driver
from the responsibility for a
correct, vigilant attitude in road
traffic. The relevant traffic
regulations must always be
followed. If a navigation instruction
contradicts traffic regulations, the
traffic regulations always apply.
Functioning of the navigation
application
The position and movement of the
vehicle are detected by the navigation
application using sensors. The
travelled distance is determined by
the vehicle's speedometer signal and
turning movements on bends by a
gyro sensor. The position is
determined by the GPS (Global
Positioning System) satellites.
By comparing the sensor signals with
the digital maps, it is possible to
determine the position with an
accuracy of approx. 10 metres.
The system will also work with poor
GPS reception, however, the
accuracy of the determination of the
position will be reduced.
After the entry of the destination
address or point of interest (nearest
petrol station, hotel, etc.) the route is
calculated from the current location to
the destination selected.
Route guidance is provided by voice
commands and a direction arrow, as
well as with the aid of a multi-colour
map display.
Navigation
Usage
Information on the map display
To display the map around the current
location, you may optionally:
● Press NAV.
● Press ; and then select
Navigation.
Route guidance not active
If route guidance is not active, the
following information is displayed:
● In the top line: information on the
audio source currently active and
the time.
● Below the top line: GPS symbol.
● In the upper left corner: a
compass that indicates the north
direction.
● Map display of the area around
the current position.
● Current position: indicated by a
red triangle within a grey circle.
● Points of interest (POI), e.g.
petrol stations, parking areas or
restaurants: indicated by
corresponding symbols (if
activated).
● In the bottom line: street name of
the current position.
37
Route guidance active
If route guidance is active, the
following information is displayed:
● In the top line: information on the
audio source currently active and
the time.
● Below the top line: GPS symbol.
● Below the top line: name of the
street to follow after the next
intersection.
● In the upper left corner: a
compass symbol that indicates
the north direction.
● Map display of the area around
the current position.
38
●
●
●
●
●
●
●
●
●
●
Navigation
Current position: indicated by a
red triangle within a grey circle.
Route: indicated by a blue line.
Final destination: indicated by a
black chequered flag.
Waypoint (intermediate
destination): indicated by a red
diamond.
Points of interest (POI), e.g.
petrol stations, parking areas, or
restaurants: indicated by
corresponding symbols (if
activated).
Traffic incidents, e.g. traffic jam:
indicated by corresponding
symbols (if activated).
On the left side: direction arrow
and distance to the next
manoeuvre.
On the left side: remaining
distance to the final destination or
to the next waypoint.
On the left side: estimated arrival
time or remaining travel time.
In the bottom line: street name of
the current position.
Map manipulation
Moving the visible map section
The visible map section on the map
display can be moved freely in all
directions using the eight-way switch.
The eight-way switch in the middle of
the multifunction knob may be tilted in
all directions.
Tilt the switch to one side. The visible
map section moves in the respective
direction.
To redisplay the map around the
current location, press BACK.
Changing the map scale
When the map is displayed, turn the
multifunction knob to display a scale
bar at the bottom of the screen.
Turn the multifunction knob again to
adjust the scale as desired.
Changing the map mode
The map may be displayed in three
(route guidance not active),
respectively five (route guidance
active) different modes, see "Map
setup" below.
Repeatedly press NAV to toggle
between the different map modes.
Map setup
Heading indicator
Press the multifunction knob to
display the Navigation Menu. Select
Heading Indicator to display the
respective submenu.
The following options are available:
● 2D North Up: 2D view, north
facing upwards.
● 2D Heading Up: 2D view, driving
direction facing upwards.
● 3D Heading Up: 3D view, driving
direction facing upwards.
Select the desired option.
Map modes
Press the multifunction knob to
display the Navigation Menu. Select
Map Modes to display the respective
submenu.
Navigation
The following options are available:
● Full Map ("Normal" view
described above): Full screen
map view, all function and
indication screen buttons
displayed.
● Full Glory: Full screen map view,
most functions and indication
screen buttons hidden.
● Split with Turn List: Divided
screen with map on the left and
turn list on the right side.
● Split with Turn Arrow: Divided
screen with map on the left side
and turn arrow for the next
turning manoeuvre on the right
side.
● Split with Media: Divided screen
with map on the left side and
audio source currently active on
the right side.
Select the desired option.
Map display
Press the multifunction knob to
display the Navigation Menu. Select
Map Settings and then Map Display
to display the respective submenu.
Depending on the external lighting
conditions, activate Day or Night.
For an automatic adaption by the
system, activate Automatic.
Displaying POIs
Press the multifunction knob to
display the Navigation Menu.
Select Show POIs to display the
respective submenu.
If you wish all POIs available in the
system to be displayed on the map,
activate Show all POIs.
If you do not wish POIs to be
displayed on the map, activate Hide
all POIs.
To only display specific POIs, activate
User Defined and then activate the
POI categories you wish to be
displayed.
Changing screen information
The route information displayed on
the screen during active route
guidance may be customised.
Press the multifunction knob to
display the Navigation Menu. Scroll
through the list and select Switch
Route Time/Destination.
39
Time information
If you wish to change the time
information displayed, select Switch
Arrival/Travel Time to display the
respective submenu.
Activate the information setting you
wish to be displayed.
Destination information
If you are in a waypoint trip, you may
want to display the route information
for a waypoint instead of those for the
final destination.
To change the setting, select Switch
Waypoint/Destination. A list of all
destinations in the waypoint trip
currently active is displayed.
Activate the information setting you
wish to be displayed.
Position information
Current position
Press the multifunction knob to
display the Navigation Menu. Select
Current Position Info.
40
Navigation
On the right side of the screen, the
current position is displayed on the
map. On the left side, the GPS
coordinates of the current position are
shown.
Destination position
If route guidance is active, you may
display information on the destination
entered.
Press the multifunction knob to
display the Navigation Menu. Select
Destination Position Info.
On the right side of the screen, the
destination is displayed on the map.
On the left side, the address and the
GPS coordinates of the destination
are shown.
Saving a position
The current position or a destination
position may be saved in the address
book.
Select Save. Find a detailed
description on saving addresses in
the address book 3 41.
Route simulation
The Infotainment system features a
route simulation mode for test
purposes.
To start the simulation mode, press
CONFIG and then select Navigation
Settings.
Scroll through the list and select
Route Simulation to display the
respective submenu.
Starting position
Since the simulation mode does not
draw on the GPS signal providing the
current position of the vehicle, a start
position must be set manually.
Use Last Known Position
To set the last position provided by a
GPS signal as starting point, select
Use Last Known Position.
Use Previous Destination
To use one of the last destinations
entered as starting point, select Use
Previous Destination. The previous
destinations list is displayed.
Select the desired address.
Use Specified Location
To use a specific location as starting
point, select Use Specified Location.
Enter an address. Find a detailed
description 3 41.
Simulation mode is started.
Cancelling simulation mode
To leave the simulation mode, press
CONFIG and then select Navigation
Settings.
Scroll through the list and select
Route Simulation to display the
respective submenu.
Select Cancel Route Simulation.
Additional route simulation menu
When route guidance is active in the
simulation mode, an additional menu
is displayed in the Navigation Menu.
Press the multifunction knob to
display the Navigation Menu. Scroll
through the list and select Route
Simulation to display the respective
submenu.
Navigation
To stop the simulated route guidance,
select Stop Simulation. The guidance
process is stopped, the route
guidance mode remains active.
To display the next simulated turning
manoeuvre on the map, select Next
Manoeuvre.
Manual address entry
Address Entry menu
Press DEST / NAV to display the
Destination Entry menu and then
select Address Entry to display a
mask for address entry.
Destination input
The Destination application provides
different options to set a destination
for route guidance.
Press DEST / NAV (when route
guidance is not active) to display the
Destination Entry menu.
41
You may then enter a house number
or junction.
Select the House number or Junction
entry field. The keyboard is
redisplayed. Enter the desired
number or street name (see below).
Note
If a house number is not stored in the
system database, the house number
closest to the destination entered is
used for route calculation.
If required, confirm your input.
A confirmation menu is displayed.
Select Start Guidance to start route
guidance.
Select the Country entry field. A list is
displayed. Select the desired country.
Select the City/Postal entry field to
display a keyboard. Enter the desired
city name or postal code (see below).
Select the Street entry field to
redisplay the keyboard. Enter the
desired street name (see below).
Keyboard
Depending on the function selected,
the keyboards may be displayed
differently.
42
Navigation
To change the letter arrangement on
the letter keyboard, select ABC on the
left side of the keyboard. The letters
are now arranged in alphabetical
order.
To enter a character sequence,
successively select the desired
characters.
Note
When entering an address, the
keyboard uses an intelligent spelling
function which automatically blocks
out characters that cannot occur
next in the respective character
sequence.
To enter special characters not
available on the letter keyboard,
select ÄÖ at the right side of the letter
keyboard. The special characters
keyboard is displayed. Select the
desired character.
To enter numbers or symbols, select
Sym at the right side of the special
characters keyboard. The symbols
keyboard is displayed. Select the
desired character.
To redisplay the letter keyboard,
select ABC at the right side of the
symbol keyboard. This way you may
toggle between the three keyboards.
To delete characters already entered,
select Delete at the right side of the
respective keyboard or press BACK.
When entering an address, a list of
matching entries is automatically
displayed as soon as the number of
matching entries found in the address
memory is equal to or less than six.
To manually display a list of matching
entries for the current input, select the
respective List screen button at the
bottom of the keyboard.
To display the last five entries made,
select Last 5 at the bottom of the
keyboard.
Select the desired entry from the list.
If required, select the confirmation
button displayed at the bottom of the
keyboard.
Points of Interest
A point of interest is a specific location
that might be of general interest, e.g.
a petrol station, parking area or
restaurant.
The data stored within the
Infotainment system contain a great
number of predefined POIs which are
indicated by symbols on the map.
These POIs may be selected as
destinations for route guidance.
Search menu
A POI may be selected using different
search masks.
Press DEST / NAV to display the
Destination Entry menu and then
select Points of Interest to display the
POI List menu.
Navigation
Select Category, Name or Telephone
number. The respective search mask
is displayed.
Fill out the entry fields in the
respective search mask.
Category search mask
Select the Location entry field to
display a list. Select the desired
option.
Select the Category entry field to
display a POI category list. Select the
desired category and then a
subcategory from the list.
Select the Sort Method entry field to
display the respective submenu.
Select By Distance or By Name.
Select Search at the bottom of the
screen. A list of POIs or POI
categories is displayed
corresponding to the criteria entered.
Select the desired menu item.
Name search mask
Select the Country entry field to
display a list of all available countries.
Select the desired country.
To specify the location, select the
entry field for the city or postal code.
A keyboard is displayed. Enter the
desired name or number.
Select the Sort Method entry field to
display the respective submenu.
Select By Distance or By Name.
Select Search at the bottom of the
screen. The keyboard is redisplayed.
Enter the name of the desired POI.
Telephone number search mask
Select the Country entry field to
display a list of all available countries.
Select the desired country.
Select the Sort Method entry field to
display the respective submenu.
Select By Distance or By Name.
43
Select the Number entry field to
display a keypad. Enter the desired
number.
When the respective search mask is
filled out, a confirmation menu is
displayed.
Select Start Guidance to start route
guidance.
Category lists
Press NAV and then the multifunction
knob to display the Navigation Menu.
Select Nearby POIs or POIs Along
Route. A POI category list is
displayed.
Select the desired category,
subcategories and then POI.
A confirmation menu is displayed.
Select Start Guidance to start route
guidance.
Previous Destinations
The last destinations selected or
entered for route guidance are stored
within the system.
Press DEST / NAV to display the
Destination Entry menu and then
select Previous Destinations.
44
Navigation
A list of the last destinations is
displayed sorted in reverse
chronological order.
Select the desired address from the
list.
A confirmation menu is displayed.
Select Start Guidance to start route
guidance.
Address Book
The Address Book provides local
storage space for addresses entered
in the navigation application.
Storing addresses in the address
book
To store an address in the address
book, press DEST / NAV to display
the Destination Entry menu.
Enter or select the desired address.
The confirmation menu is displayed.
Select Save. The Address Book
Entry mask is displayed.
Depending on the information
available, the different entry fields are
already filled.
To enter or modify the name of the
respective location, select the Name
entry field. A keyboard is displayed.
Enter the desired name and confirm
your input.
To modify the address, select the
Address entry field. The address
entry mask is displayed. Make your
changes and confirm your input.
To enter or modify the phone number,
select the Number entry field. A
keypad is displayed. Enter the
desired number.
If activated 3 37, the address book
entries are indicated on the map by
POI icons. To change the icon
indicating an address entry, select the
Icon entry field. A list of all POI icons
available within the system is
displayed.
Scroll through the list and select the
desired icon.
Select Done at the bottom of the entry
mask. The address is stored.
Navigation
Selecting addresses from the
address book
Press DEST / NAV to display the
Destination Entry menu and then
select Address Book. A list of all
address book entries is displayed.
45
Select the desired entry.
A confirmation menu is displayed.
Select Edit to display the Address
Book Entry mask.
Make your changes and confirm your
input. The changes are stored in the
address book.
Phone Book
Select the desired entry.
A confirmation menu is displayed.
Select Start Guidance to start route
guidance.
Editing addresses in the address
book
Press DEST / NAV to display the
Destination Entry menu and then
select Address Book. A list of all
address book entries is displayed.
Addresses stored in the phone book
of the mobile phone connected may
be selected as destinations.
Press DEST / NAV to display the
Destination Entry menu and then
select Phone Book. The Phone Book
Search menu is displayed.
Select the desired first letter range to
display a preselection of the
telephone book entries you wish to be
displayed. The phone book jumps to
the position of the letter range
selected.
Select the desired entry in the
telephone book to display the
address saved under this entry.
Select the address.
Note
When the Infotainment system
cannot find a valid address, you are
prompted with a message.
A confirmation menu is displayed.
Select Start Guidance to start route
guidance.
Destination selection from the
map
Destinations (addresses or POIs)
may also be set via the map.
46
Navigation
Press NAV to display the map.
Use the eight-way switch to centre the
map around the desired destination.
A red v is indicated on the map and
the corresponding address is
displayed on a label.
My Home
Waypoint routes
You can permanently store your
home address in the system.
When a destination has been entered
and route guidance is active,
intermediate destinations (waypoints)
may be added to the route.
To set up a waypoint route during
active route guidance, press
DEST / NAV to open the Route
Menu and then select Destination
List. A submenu is displayed.
Storing the home address
Press DEST / NAV to display the
Destination Entry menu.
Enter your home address.
A confirmation menu is displayed.
Select Save as Home.
You are prompted with a message.
Confirm the message to save your
home address.
Note
The home address is also stored in
the address book.
Press the multifunction knob to
activate Go.
A confirmation menu is displayed.
Select Start Guidance to start route
guidance.
Note
If there is more than one POI located
at the map position selected, this is
indicated on the label. Activating
Go then opens a list for selection.
Selecting the home address
Press DEST / NAV to display the
Destination Entry menu and then
select My Home.
Route guidance to the home address
is started immediately.
Adding waypoints
To add an intermediate destination,
select Add Waypoint. The waypoint
list is displayed.
Navigation
Deleting waypoints
To delete a waypoint, select Delete
Waypoint. The waypoint list is
displayed.
Select Delete next to the waypoint
you wish to delete.
The waypoint is deleted and the
waypoint list is redisplayed.
To delete the whole list and end route
guidance, select Delete All
Destinations.
Select Add at the position where you
wish to add a waypoint. The
Destination Entry menu is displayed.
Enter or select the desired
destination. The confirmation menu is
displayed.
Select Add. The route is recalculated
and the waypoint list is redisplayed
with the intermediate destination at
the position selected.
Note
Up to four destinations may be
stored in a waypoint list.
Moving waypoints
To change the order of the waypoints
in the route, select Sort Waypoints.
Select Move next to the waypoint you
wish to move. The Add Waypoint
menu is displayed.
Select Add at the position where you
wish to drop the respective waypoint.
The route is recalculated and the
order of the waypoints in the waypoint
list is changed.
Favourite Routes
Storing waypoint routes
A waypoint route created (see above)
may be saved as favourite route.
47
During an active waypoint route,
press DEST / NAV to open the Route
Menu and then select Destination
List. A submenu is displayed.
Select Save as favourite route. A
keyboard is displayed.
Enter a name for the favourite route
and confirm your input.
The waypoint route is saved.
Creating new favourite routes
Press DEST / NAV to display the
Destination Entry menu and then
select Favourite Routes to display the
Favourite Route menu.
Select New Favourite Route. A
keyboard is displayed.
48
Navigation
Create a waypoint route (see above).
To change the name of the respective
favourite route, select Edit Name. The
keyboard for name entry is displayed.
Enter the desired name and confirm
your input.
To delete the respective favourite
route, select Delete Favourite. The
favourite route is deleted and the
Favourite Route menu is redisplayed.
Enter a name for the favourite route
and confirm your input. The Favourite
Route menu is redisplayed.
Select the desired favourite route. A
menu is displayed.
Selecting a favourite route
Press DEST / NAV to display the
Destination Entry menu and then
select Favourite Routes to display a
list of the favourite routes saved.
Select the desired route from the list.
The route confirmation menu is
displayed.
To start route guidance, select Start
Guidance.
Latitude / Longitude
The GPS coordinates of a desired
location may be used to set a
destination.
Press DEST / NAV to display the
Destination Entry menu and then
select Latitude.
Select the Latitude entry field to
display the Geolocation Entry menu.
Repeatedly press the multifunction
knob to adjust the first setting as
desired.
Turn the multifunction knob to move
to the next value to be set.
Proceed like this to set all values.
Select BACK to return to the next
higher menu level.
Adjust the longitude values as
described above.
Navigation
When all GPS coordinates are
entered, select Search at the bottom
of the screen.
A confirmation menu is displayed.
To start route guidance, select Start
Guidance.
A confirmation menu is displayed.
Select Start Guidance to start route
guidance.
Deleting saved destinations
To delete destinations stored in the
system, press CONFIG, select
Navigation Settings and then Delete
Saved Destinations. A submenu is
displayed.
Activate the menu items of the
storage location you wish to be
cleared.
Select Delete. The selected storage
locations are cleared.
Guidance
Starting and cancelling route
guidance
Starting route guidance
Enter or select the desired address.
Cancelling route guidance
When route guidance is active, press
DEST / NAV to display the Route
Menu.
Select Cancel Route to cancel the
current navigation session.
Guidance instructions
Route guidance is provided by voice
prompts and visual instructions on the
map (if activated).
49
Voice prompts
Navigation voice prompts announce
which direction to follow, when
approaching an intersection at which
you need to turn.
Press CONFIG and then select
Navigation Settings.
Select Voice Prompt to display the
respective submenu.
If you wish the system to audibly
indicate the next turning manoeuvre,
activate Navigation Voice Prompts.
If you wish traffic alerts to be read out,
activate Traffic Alert Prompts.
To adjust the volume during voice
prompts, select Navigation Volume.
The respective submenu is displayed.
To adjust the volume of voice
prompts, select Announcement and
then adjust the setting as desired.
To adjust the volume of the audio
source possibly playing in the
background, select Background and
then adjust the setting as desired.
Select Volume Test to get an audio
example of the settings.
50
Navigation
Guidance alerts
Guidance alerts show in a close-up
view of the respective map section
which direction to follow when
approaching an intersection at which
you need to turn.
Press CONFIG and then select
Navigation Settings.
Select Guidance Alert to display the
respective submenu.
If you wish the display to
automatically show the map when
approaching the next turning
manoeuvre, activate Guidance Alert
in Primary.
If you wish turning manoeuvres to be
displayed in a close-up view, activate
Guidance Alert in Map.
Traffic incidents
The TMC traffic information system
receives all current traffic information
from TMC radio stations. This
information is included in the
calculation of a route.
Traffic settings
Press CONFIG and then select
Navigation Settings.
Select Traffic Settings to display the
respective submenu.
To use the TMC traffic information
system, activate Traffic Events.
Recalculation of an active route
If a traffic problem occurs during
active route guidance, the route may
be changed.
Select Alert if better route is
available to display the respective
submenu.
If you wish the route to be constantly
adapted to the current traffic situation,
activate Route Based on Traffic
Conditions.
Choose between Automatic
Recalculation and Recalculation after
Confirmation of a corresponding
message.
Traffic incidents on the map
Traffic incidents may be indicated on
the map by corresponding symbols.
Select Show Traffic Events on Map to
display the respective submenu.
Select the desired option.
If User Defined is activated, scroll
through the list and activate the traffic
incidents categories you wish to be
displayed.
TMC stations
The TMC stations broadcasting traffic
information, may be set automatically
or manually.
Select Traffic Stations to display a
selection mask.
Select the Mode entry field to display
the respective submenu. Select the
desired option.
If Manual Station Selection is chosen,
a TMC station needs to be set.
Navigation
Select the Station entry field to
display the Traffic Station List.
Select the desired station.
Traffic incidents lists
When route guidance is active, press
NAV and then press the multifunction
knob to display the Navigation Menu.
Scroll through the list and select
Traffic.
To display a list of all traffic events
known for the area around the current
vehicle location, select All Traffic
Events.
To display a list of the traffic events
concerning the current route, select
Traffic Events on Route.
The traffic incidents lists may be
sorted in different ways.
Select Traffic Settings in the Traffic
menu and then Sort Method. The
respective submenu is displayed.
Activate the desired option.
Route tracking
The bread crumbs function allows
tracking of the roads already taken in
a route.
Press CONFIG and then select
Navigation Settings. Select Bread
Crumbs to display the respective
menu.
To start a tracking session, activate
Record. The route taken is recorded
and displayed as dotted line on the
map.
To delete the bread crumbs already
dropped in an active tracking session,
select Delete. You are prompted with
a message. Confirm the message to
delete all bread crumbs.
To end the tracking session,
deactivate Record. A keyboard is
displayed.
51
Enter a name for the respective
tracking session and select Done.
The session is stored in the Saved
list.
To display a list of all tracking
sessions, select Saved. Select the
desired tracking session to display
the Bread Crumb Details menu.
To change the name of the respective
tracking session, select Edit Name. A
keyboard is displayed. Enter the
desired name and select Done.
Select Load to display the bread
crumb main menu. If you wish the
respective tracking session to be
constantly displayed on the map,
activate Display.
To directly display the whole tracking
session in the respective map
section, select Show on Map.
To delete the respective tracking
session, select Delete.
Routing
When a route has been calculated,
you may manually change certain
parts or recalculate the whole route.
52
Navigation
Turn List
The Turn List displays all streets and
turning manoeuvres on the calculated
route starting from the current
location.
Press DEST / NAV and then select
Turn List. The turn list is displayed.
To exclude certain streets from the
route, select Avoid next to the
respective street.
The route is recalculated and the
respective street is excluded.
Avoid List
When streets have been excluded
from the original route, they are
displayed in the Avoid List.
Press DEST / NAV and then select
Avoid List to display the respective
submenu.
To display all streets avoided, select
View List.
To delete all avoidances and return to
the original route, select Delete All
Items.
Detour
Press DEST / NAV and then select
Detour.
To change the route for a certain
distance, select Detour By Distance.
A menu listing different distances is
displayed.
Select the desired distance. The
route is recalculated accordingly.
To block the whole route, select
Detour Complete Route. The original
route is blocked and a new route to
the desired destination is calculated.
Exit list
To display a list of the next exits and
motorway stations while driving on a
motorway, press NAV and then press
the multifunction knob to display the
Navigation Menu.
Scroll through the list and select Exit
List.
Route options
When route guidance is active, press
DEST / NAV and then select Route
Options.
A list of route calculation options and
road types is displayed.
To define by what criteria a route may
be calculated, activate one of the
options: Fastest for the fastest route
(in time), Shortest for the shortest
route (in distance) or Eco for the route
with the lowest fuel consumption.
To define which road types may be
included in the calculation of the
route, activate the desired options:
highways, tollroads, ferries, etc.
Speech recognition
Speech recognition
General information
Embedded speech recognition
General information ..................... 53
Usage .......................................... 54
Speech commands overview ....... 57
The speech recognition of the
Infotainment system enables you to
operate various functions of the
Infotainment system via voice input. It
recognises commands and numeric
sequences independently of the
relevant speaker. The commands
and numeric sequences can be
spoken without a pause between the
individual words.
In the event of incorrect operation or
commands, the speech recognition
gives visual and/or acoustic feedback
and requests you to re-enter the
desired command. Apart from this,
the speech recognition
acknowledges important commands
and will enquire if necessary.
In general, there are different ways to
speak commands for completing the
tasks. Most of them, except
destination entry and voice keypad,
can be completed in a single
command.
53
If the action takes more than one
command to be performed, proceed
as follows:
In the first command, you indicate the
type of action to be performed, e.g.
"Navigation destination entry". The
system replies with prompts that lead
you through a dialogue for entering
the necessary information. For
example, if a destination for route
guidance is needed, say "Navigation"
or "Destination entry".
Note
To ensure that conversations inside
the vehicle do not lead to
unintentional triggering of the
system functions, the speech
recognition does not start until it has
been activated.
Language support
● Not all languages available for
the display of the Infotainment
system are also available for the
speech recognition.
● If the currently selected display
language is not supported by the
speech recognition, speech
recognition is not available.
54
Speech recognition
In such a case you must select
another language for the display
if you want to control the
Infotainment system via voice
input. Changing the display
language, see "Language" in
chapter "System settings" 3 20.
Address input for destinations in
foreign countries
In case you want to enter the address
of a destination located in a foreign
country via voice input, you must
change the language of the
Infotainment display to the language
of the foreign country.
E.g. if the display is currently set to
English and you want to enter the
name of a city located in France, you
must change the display language to
French.
Exceptions: If you want to enter
addresses in Belgium, you may
optionally change the display
language to French or Dutch. For
addresses in Switzerland you may
optionally change the display
language to French, German, or
Italian.
For changing the display language,
see "Language" in chapter "System
settings" 3 20.
Input order for destination addresses
The order in which the parts of an
address must be entered using the
speech recognition system is
dependent on the country where the
destination is located.
An example for the respective input
order is given out by the system.
Voice pass-thru application
The voice pass-thru application of the
Infotainment system allows access to
the speech recognition commands on
your smartphone. See the operating
instructions for your smartphone to
find out whether your smartphone
supports this feature.
Usage
Embedded speech recognition
Activating speech recognition
Note
Speech recognition is not available
during an active phone call.
Press w on the right side of the
steering wheel.
The audio system mutes, w on the
display is highlighted, and a voice
output message prompts you to say a
command.
As soon as the speech recognition is
ready for voice input, a beep is heard.
You can now say a voice command to
directly initiate a system function (e.g.
playing a radio station), or to start a
dialogue sequence with several
dialogue steps (e.g. entering a
destination address), see "Operation
via speech commands" further below.
After a dialogue sequence is finished,
the speech recognition is deactivated
automatically. To initiate another
dialogue sequence, you must activate
the speech recognition again.
Speech recognition
Adjusting the volume of voice
prompts
Press w or ─ on the right side of the
steering wheel.
Interrupting a voice prompt
As an experienced user, you can
interrupt a voice prompt by briefly
pressing w on the steering wheel.
A beep is heard immediately, and a
command can be stated without
having to wait.
Cancelling a dialogue sequence
There are several possibilities to
cancel a dialogue sequence and to
deactivate the speech recognition:
● Say "Cancel" or "Exit".
● Press n on the right side of the
steering wheel.
In the following situations, a dialogue
sequence is automatically cancelled:
● If you do not say any commands
for some time (by default you are
prompted three times to say a
command).
● If you say commands that are not
recognised by the system (by
default you are prompted three
times to say a correct command).
Operation via speech commands
The speech recognition can
understand commands that are either
naturally stated in sentence form, or
direct commands stating the
application and the task.
For best results:
● Listen for the voice prompt and
wait for the beep before saying a
command or replying.
● Say "Help" if you want to listen
again to the help prompt for the
current dialogue step.
●
55
The voice prompt can be
interrupted by pressing w again.
If you wish to directly speak your
command, press w twice.
● Wait for the beep and then speak
the command naturally. In most
cases, recognition rates will be
higher if pauses are kept to a
minimum. Use short and direct
commands.
Usually phone and audio commands
can be spoken in a single command.
For example, "Call David Smith at
work", "Play" followed by the artist or
song name, or "Tune to" followed by
the radio frequency and the
waveband.
Navigation destinations, however,
are too complex for a single
command. First, state "Navigation"
and then, e.g. "Address" or "Point of
Interest". The system responds with
requesting more details.
After saying "Point of Interest", only
major chains may be selected by
name. Chains are businesses with at
least 20 locations. For other POIs,
56
Speech recognition
say the name of a category, e.g.
"Restaurants", "Shopping centres", or
"Hospitals".
Direct commands are easier
understood by the system, e.g. "Call
01234567".
If you say "Phone", the system
understands that a phone call is
requested and responds with
respective questions until enough
details are gathered. If the phone
number has been saved with a name
and a place, the direct command
should include both, for example "Call
David Smith at work".
Selecting list items
When a list is displayed, a voice
prompt asks to confirm or select an
item from that list. A list item may be
manually selected, or by speaking the
line number of the item.
The list on a speech recognition
screen functions the same as a list on
other screens. Manually scrolling the
list on a screen during a speech
recognition session suspends the
current speech recognition event and
plays a prompt like "Make your
selection from the list using the
manual controls, or press BACK on
the faceplate to try again".
If no manual selection is made within
15 seconds, the speech recognition
session terminates, you are prompted
with a message, and the former
screen is redisplayed.
Find further information in the
operating instructions for your
smartphone.
The "Back" command
To return to the previous dialogue
step, alternatively: say "Back", or
press BACK on the instrument panel.
Deactivating the voice pass-thru
speech recognition
Press n on the right side of the
steering wheel. The speech
recognition session is ended.
The "Help" command
After saying "Help", the help prompt
for the current dialogue step is read
aloud.
To interrupt the help prompt, press w
again. A beep is heard. You may say
a command.
Voice pass-thru application
Activating the voice pass-thru speech
recognition
Press and hold w on the right side of
the steering wheel until a speech
recognition session is started.
Adjusting the volume of voice
prompts
Press w or ─ on the right side of the
steering wheel.
Speech recognition
Speech commands overview
The table below contains an overview of the most important speech commands.
Menu
Action
Speech commands
All menus
Confirming a
"(Yes | Right | OK | Yeah | Yep | Correct)"
system question
Negating a
"(No | Incorrect | Wrong | Nope)"
system question
Cancelling a
session
"Cancel"
Returning to
previous step
"([Go] Back | Return | Previous)"
Asking for
assistance
"(Help | Assistance) | (Help | Assist) Me"
"More Commands"
Activating or
deactivating
"Verbose"
"[Set] Verbose On"
"[Set] Verbose Off"
Requesting the
current music
source
"("What's" | What is) playing [now]"
57
58
Menu
Speech recognition
Action
Radio menu Selecting a
waveband
Selecting a
station
Media menu Selecting a
media source
Speech commands
"[Tune [to] | Select] F M [Radio]"
"[Tune [to] | Select] A M [Radio]"
"[Tune [to] | Select] D A B [Radio]"
"Tune F M …"
"Tune A M …"
"Tune D A B …"
"[Play | Select] C D"
"[Play | Select] U S B"
"[Play | Select] [Front] AUX"
"[Play | Select] Bluetooth Audio"
Selecting a
"Play Artist ..."
search category "Play Album …"
"Play Genre …"
"Play Folder …"
"Play Playlist …"
"Play Composer …"
"Play Audiobook …"
Selecting a song "Play Song …"
Speech recognition
59
Menu
Action
Speech commands
Navigation
menu
Entering a
destination
"Directed [Destination] Address [entry] | (enter | go to | navigate to) [Destination] Address
Directed"
"(Navigation | Destination)", "[Destination] Address [entry] | (Enter | Go to | Navigate to)
[Destination] Address"
"(Navigation | Destination)", "[Destination] (Intersection | Junction)"
Entering a POI
"(Navigation | Destination)", "(P O I | (Place | Point) of Interest)"
"(Navigation | Destination)", "(P O I | (Place | Point) of Interest) (nearby | near me)"
"(Navigation | Destination)", "(P O I | (Place | Point) of Interest) (around | near)
destination"
"(Navigation | Destination)", "(P O I | (Place | Point) of Interest) along [the] (route | way)"
Entering the
home address
"(Navigation | Destination)", "[Go] [to] Home"
Asking for the
current location
"(Navigation | Destination)", "Where am I| [My] Current Location | What is My Current
Location"
60
Speech recognition
Menu
Action
Speech commands
Navigation
menu
Adding a
waypoint
"(Navigation | Destination)", "Add Waypoint Directed Address"
"(Navigation | Destination)", "Add Waypoint ([Destination] Address [entry] | (Enter | Go
to | Navigate to) [Destination] Address)"
"(Navigation | Destination)", "Add Waypoint (P O I | (Place | Point) of Interest)"
"(Navigation | Destination)", "Add Waypoint (Intersection | Junction)"
"(Navigation | Destination)", "Add Waypoint [(Go | Navigate) to] Contact"
"(Navigation | Destination)", "Add Waypoint [(Go | Navigate) [to]] Home"
Deleting a
waypoint
"(Navigation | Destination)", "Delete Waypoint"
Cancelling route "(Navigation | Destination)", "(Stop | Cancel | Turn Off | End) (Navigation | [My] [Current]
guidance
Route | Directions | Route Guidance)"
Activating/
deactivating
voice guidance
"[Set | Turn] Voice Guidance On"
"[Set | Turn] Voice Guidance Off"
Speech recognition
Menu
Action
Phone menu Pairing device
Speech commands
"(Pair | Connect) [Device]"
Dialling a
number
"Digit Dial"
"(Call | Dial | Ring) …"
Redialling the
last number
"Redial [Last Number]"
Erasing digits
"(Clear | Erase)"
"(Clear | Erase) All"
Reading a text
message
"[Read] (Messages | Texts | S M S)"
... : dynamic spacer stands for the specific names to be inserted in that position
| : vertical bar separates alternatives
( ) : round brackets embrace alternatives
[ ] : square brackets designate optional parts of a command
, : comma separates necessary steps in a sequence
61
62
Phone
Phone
General information ..................... 62
Bluetooth connection ................... 63
Emergency call ............................ 64
Operation ..................................... 65
Text messages ............................ 68
Mobile phones and CB radio
equipment .................................... 69
General information
The Phone portal provides you with
the possibility of having mobile phone
conversations via a vehicle
microphone and the vehicle
loudspeakers as well as operating the
most important mobile phone
functions via the Infotainment system
in the vehicle. To be able to use the
Phone portal, the mobile phone must
be connected with it via Bluetooth.
The Phone portal can be operated
optionally via the speech recognition
system.
Not all Phone portal functions are
supported by every mobile phone.
The possible phone functions depend
on the relevant mobile phone and
network provider. You will find further
information on this in the operating
instructions for your mobile phone or
you can enquire about them with your
network provider.
Important information for
operation and traffic safety
9 Warning
Mobile phones have effects on
your environment. For this reason
safety regulations and directions
have been prepared. You should
be familiar with the related
directions before you use the
telephone function.
9 Warning
Use of the hands-free facility while
driving can be dangerous because
your concentration is reduced
when telephoning. Park your
vehicle before you use the handsfree facility. Follow the stipulations
of the country in which you find
yourself at present.
Do not forget to follow the special
regulations that apply in specific
areas and always switch off the
mobile phone if the use of mobile
phones is prohibited, if
Phone
interference is caused by the
mobile phone or if dangerous
situations can occur.
Bluetooth
The Phone portal is certified by the
Bluetooth Special Interest Group
(SIG).
You will find further information about
the specification on the Internet at
http://www.bluetooth.com
connecting of the Bluetooth devices
to the Infotainment system are carried
out.
Important information
●
●
●
Bluetooth connection
Bluetooth is a radio standard for the
wireless connection of e.g. mobile
phones, iPod/iPhone models, or other
devices.
To be able to set up a Bluetooth
connection to the Infotainment
system, the Bluetooth function of the
Bluetooth device must be activated.
For further information, please
consult the user guide of the
Bluetooth device.
Via the Bluetooth menu, pairing (PIN
code exchange between Bluetooth
device and Infotainment system) and
●
Up to five devices can be paired
to the system.
Only one paired device can be
connected to the Infotainment
system at a time.
Pairing normally only needs to be
carried out once, unless the
device is deleted from the list of
paired devices. If the device has
been connected previously, the
Infotainment system establishes
the connection automatically.
Bluetooth operation considerably
drains the device's battery.
Therefore, connect the device to
the power outlet for charging.
Bluetooth menu
To open the Bluetooth menu, press
CONFIG. Select Phone Settings and
then Bluetooth.
The menu items Device list and Pair
device are displayed.
63
Pair device
To initiate the pairing process on the
Infotainment system, select Pair
device. A message with a four-digit
Infotainment system code is
displayed.
Initiate the pairing process on the
Bluetooth device. If required, enter
the Infotainment system code on the
Bluetooth device.
A six-digit PIN code for the pairing
process is displayed on the
Infotainment system.
To confirm the pairing process:
● If SSP (secure simple pairing) is
supported:
Compare the PIN codes
displayed on the Infotainment
system and on the Bluetooth
device (if demanded) and confirm
the message on the Bluetooth
device.
● If SSP (secure simple pairing) is
not supported:
Enter the PIN code on the
Bluetooth device and confirm
your input.
64
Phone
The devices are paired and the phone
main menu is displayed.
The phone book and call lists (if
available) are downloaded from the
Bluetooth device.
If required, confirm the corresponding
message on the Bluetooth device.
Connecting a device
Select the device you wish to
connect. A submenu is displayed.
Select Select.
The device previously connected is
disconnected and this device is
connected.
In some networks it may be
necessary for a valid SIM card to
be properly inserted in the mobile
phone.
Device list
Deleting a device
Select the device you wish to delete.
A submenu is displayed.
Select Delete.
The device is deleted.
Bear in mind that you can make
and receive calls with the mobile
phone, if it is in a service area with
a sufficiently strong signal. Under
certain circumstances emergency
calls cannot be made on all mobile
phone networks; it is possible that
they cannot be made when certain
network services and/or telephone
functions are active. You can
enquire about this with the local
network operators.
The emergency call number can
differ depending on the region and
country. Please enquire
beforehand about the correct
emergency call number for the
relevant region.
The device list contains all Bluetooth
devices paired to the Infotainment
system.
Emergency call
9 Warning
If a new device is paired, it is
displayed in the device list.
Connection setup cannot be
guaranteed in all situations. For
this reason you should not rely
exclusively on a mobile phone
when a vitally important
communication (e.g. a medical
emergency) is concerned.
9 Warning
Phone
Making an emergency call
Dial the emergency call number (e.g.
112).
The telephone connection to the
emergency call centre is set up.
Answer when the service personnel
questions you about the emergency.
9 Warning
Do not end the call until you are
requested to do so by the
emergency call centre.
model. During this period, operation
of the mobile phone is possible via the
Infotainment system only to a limited
extent.
Not every telephone supports all
functions of the phone application.
Therefore, deviations from the range
of functions described are possible.
65
Initiating a phone call
Entering a number
Press O and then select Enter
number. A keypad is displayed.
Phone main menu
To display the phone main menu,
press O. The following screen is
displayed (if a mobile phone is
connected).
Operation
As soon as a connection via
Bluetooth has been set up between
your mobile phone and the
Infotainment system, you can also
operate many functions of your
mobile phone via the Infotainment
system.
After setting up a connection between
the mobile phone and the
Infotainment system, the mobile
phone data is transmitted to the
Infotainment system. This can take
some time depending on the phone
Enter the desired number.
Select Del on the screen or press
BACK on the instrument panel to
delete the last digit entered.
Select l or k to move the cursor
within the number already entered.
To start dialling, select OK.
Note
You may access the phone book
from the keypad by pressing PB.
66
Phone
Phone book
Press O and then select Phone
Book. The Phone Book Search menu
is displayed.
Select the desired first letter range to
display a preselection of the
telephone book entries you wish to be
displayed. The phone book jumps to
the position of the letter range
selected.
Call lists
Press O and then select Call Lists.
The Call Lists menu is displayed.
Select the desired entry in the
telephone book to display the
numbers saved under this entry.
Select the desired number to start
dialling.
Phone book sorting
The phone book may be sorted by last
name or by first name.
To change the sorting order, select
O and then Phone Settings.
Select Sort Order to display the
respective submenu.
Activate the desired option.
Select the desired call list. Depending
on the list selected, the last incoming,
outgoing or missed calls are
displayed.
Select the desired entry in the call list
to start dialling.
Incoming calls
When a call comes in, a message is
displayed on the screen.
Phone
67
Second phone call
Initiating a second phone call
While a call is active, select Enter
number in the in-call view. The
keypad is displayed. You may enter a
number or select a number from the
phone book, see above.
To take the call, select Answer.
To reject the call, select Decline.
Ending a phone call
To end the call, select Hang up.
Functions during a phone call
Muting a call
To temporarily mute the microphone,
activate Mute call.
Deactivate Mute call to unmute the
microphone.
When a call is active, the in-call view
is displayed.
Transferring to handset
Select Transfer to Handset to transfer
the call to the mobile phone. The
Private Call menu is displayed.
To transfer the call back to the
Infotainment system, select Transfer
call in the Private Call menu.
Second incoming phone call
When a second call comes in, a
message is displayed at the bottom of
the screen.
Select the desired option.
If the call is taken, the first call is put
on hold and the second call becomes
active.
Both calls are displayed in the in-call
view.
68
Phone
Text messages
As soon as a connection via
Bluetooth has been set up between
your mobile phone and the
Infotainment system, you can operate
the messages inbox of your mobile
phone via the Infotainment system.
Not every phone supports the text
messages function of the
Infotainment system.
To switch between the calls, select
Switch calls.
Conference call
Select Merge calls to activate both
calls at the same time.
Merge calls changes to Detach call.
To end a conference call, select
Detach call.
Ending phone calls
In a conference call, select Hang up
to end both phone calls.
Activating the messages
application on the mobile phone
The transmission of text message
data to the Infotainment system must
be activated on the mobile phone.
After connecting to the Infotainment
system you may be prompted with a
message on your mobile phone
requesting permission to access the
mobile phone text messages via the
Infotainment system. Confirm the
message.
If no message is displayed, access
the Bluetooth menu on your mobile
phone, select the name of the
Infotainment system and activate the
corresponding access function.
Note
Find detailed information for
granting access on different mobile
phones on our website.
The Messages icon in the Home
menu of the Infotainment system is
then selectable.
Incoming text message
When a new text message is
received, you are prompted with a
message indicating the name or
number of the sender.
Select one of the options in the
message.
Listen
If you wish the system to read out the
message, select Listen.
View
To display the message on the
screen, select the respective screen
button.
Note
Messages are only displayed on the
screen when the vehicle is parked.
Phone
Mobile phones and CB radio
equipment
Dismiss
To dismiss the message, select the
respective screen button.
Installation instructions and
operating guidelines
Reply
To directly answer the message,
select Reply. A list of predefined
messages is displayed.
Select the desired message and
confirm your input.
The message is sent.
Note
New predefined messages may be
created in the settings menu.
Call
To call the sender of the text
message, select Call.
Inbox
Press ; and then select Messages to
display the respective menu.
Select Inbox to display a list of all
inbox messages.
69
Select the desired message. The
message is displayed on the screen.
Note
Messages are only displayed on the
screen when the vehicle is parked.
If desired, select one of the options at
the bottom of the screen (see above).
Settings
Press ; and then select Messages to
display the respective menu.
Select Settings to display the
respective submenu.
Adjust the settings as desired.
The vehicle specific installation
instructions and the operating
guidelines of the mobile phone and
handsfree manufacturer must be
observed when installing and
operating a mobile telephone. Failure
to do so could invalidate the vehicle
type approval (EU directive 95/54/
EC).
Recommendations for fault-free
operation:
● The exterior antenna needs to be
professionally installed to obtain
the maximum range possible.
● Maximum transmission power:
10 watts.
● The mobile phone needs to be
installed in a suitable spot.
Consider relevant note in the
Owner's manual, section Airbag
system.
70
Phone
Seek advice on predetermined
installation points for the external
antenna or equipment holder and
ways of using devices with a
transmission power exceeding
10 watts.
Use of a handsfree attachment
without external antenna with mobile
telephone standards
GSM 900/1800/1900 and UMTS is
only permitted if the maximum
transmission power of the mobile
telephone is 2 watts for GSM 900 or
1 watt for the other types.
For reasons of safety, do not use the
phone while driving. Even use of a
handsfree set can be a distraction
while driving.
9 Warning
Operation of radio equipment and
mobile telephones which fail to
meet above mentioned mobile
telephone standards is only
permitted using an antenna
located outside of the vehicle.
Caution
Mobile telephones and radio
equipment may lead to
malfunctions in the vehicle
electronics when operated inside
the vehicle with no exterior
antenna, unless the above
mentioned regulations are
observed.
Frequently asked questions
Frequently asked
questions
Frequently asked
questions
Speech recognition
Frequently asked questions ......... 71
? The speech recognition function
does not work very well. How can
I improve its performance?
! Wait for the beep and then try to
speak the command naturally.
Avoid long pauses, use little
accentuation and speak at a
moderate volume.
Detailed description 3 54.
? The voice prompts given out by the
speech recognition system are too
long. How can I interrupt them to
directly speak a command?
! To interrupt the voice prompt of the
speech recognition system, press
w on the steering wheel. Wait for
the beep and then speak your
command.
Detailed description 3 54.
71
? I cannot select a phone contact via
speech recognition. What am I
doing wrong?
! The Infotainment system
accesses the phone book entries
as they are stored. If the sorting
order is set to "last name, first
name", the correct command for
calling John Smith is "Smith,
John".
Detailed description 3 53.
? I cannot enter an address located
in another country via speech
recognition. What am I doing
wrong?
! Via speech recognition, you can
only enter addresses for
destinations located in the country
whose language is selected as the
system language, e.g. if the
system is set to German, you
cannot enter a destination located
in France.
Detailed description 3 53.
72
Frequently asked questions
Phone
? How can I pair my phone with the
Infotainment system?
! In order to pair a phone, press
O, select Phone Settings and
then Bluetooth. Select Pair device
and follow the instruction on the
Infotainment system and your
mobile phone. Make sure
Bluetooth is enabled.
Detailed description 3 63.
? How can I access my phone book
or recent calls list via the
Infotainment system?
! Depending on the phone, you must
allow access to the respective data
in the settings of your mobile
phone. In general, the download of
the phone book and recent calls list
is not supported by all mobile
phones.
Detailed description 3 63.
? Although access to my phone book
has been granted, not all contacts
are available in the Infotainment
system. Why is that?
! Depending on the phone, contacts
stored on the SIM card cannot be
read by the Infotainment system.
Detailed description 3 63.
Navigation
? How can I toggle between total
driving time or remaining driving
time and total distance or partial
distance?
! When the navigation application is
active, press the multifunction
knob to display the Navigation
Menu. Select Switch Route Time/
Destination and adjust the settings
as desired.
Detailed description 3 37.
? When pressing DEST/NAV,
different menus are displayed
sometimes. Why is that?
! If route guidance is active, the
destination application is
displayed for you to select a
destination.
Detailed description 3 41.
If route guidance is not active, the
Route Menu is displayed.
Detailed description 3 49.
Audio
? When playing media files from a
device connected via Bluetooth,
the track title and artist are not
displayed in the Infotainment
system and the media browse
function is not available. Why is
that?
! When connecting a device via
Bluetooth, due to the Bluetooth
protocol supported only restricted
functions are available.
Detailed description 3 33.
? The Infotainment system does not
have a tone button on the
faceplate. How can I change the
tone settings?
! The tone settings menu is
accessible via the Home Page.
Press ; and then select More to
display the second Home Page. To
access the tone settings menu,
select Tone.
Frequently asked questions
Detailed description 3 18.
73
74
Index
A
Activating AUX.............................. 33
Activating Bluetooth music........... 33
Activating CD player..................... 30
Activating radio............................. 23
Activating the Infotainment system 14
Activating the navigation system. . 37
Activating the phone portal........... 65
Activating USB audio.................... 33
Activating USB picture.................. 34
Address book................................ 41
Apps............................................. 35
Audio CUE volume....................... 19
Audio files..................................... 31
Autostore lists............................... 24
Retrieving stations..................... 24
Storing stations......................... 24
Auto volume.................................. 19
AUX.............................................. 31
B
BACK button................................. 16
Balance......................................... 18
Basic operation............................. 16
Bass.............................................. 18
Bluetooth connection.................... 63
Bluetooth music............................ 31
Bread crumbs............................... 49
C
Category list.................................. 23
CD player...................................... 29
Chime volume............................... 19
Control elements
Infotainment system.................... 8
Steering wheel............................ 8
Control elements overview............. 8
D
DAB.............................................. 27
Date.............................................. 20
Destination input .......................... 41
Digital audio broadcasting............ 27
Display.......................................... 20
Displaying pictures....................... 34
E
Emergency call............................. 64
EQ................................................ 18
Equaliser....................................... 18
F
Factory defaults............................ 20
Fader............................................ 18
Favourite lists............................... 25
Retrieving stations..................... 25
Storing stations......................... 25
File formats................................... 29
75
Audio files.................................. 31
Picture files................................ 31
Frequently asked questions......... 71
G
General information 29, 31, 36, 53, 62
AUX........................................... 31
Bluetooth music......................... 31
CD............................................. 29
Infotainment system.................... 6
Navigation................................. 36
Phone portal.............................. 62
Radio......................................... 23
USB........................................... 31
Gracenote..................................... 31
Guidance ..................................... 49
H
Home address.............................. 41
Home Page............................. 16, 20
I
Infotainment control panel.............. 8
K
Keyboard...................................... 41
L
Language..................................... 20
M
Maps............................................. 37
Maximum startup volume............. 19
Menu operation............................. 16
Messages..................................... 16
Midrange....................................... 18
Mobile phones and CB radio
equipment ................................ 69
Multifunction knob......................... 16
Mute.............................................. 14
N
Navigation
Address book............................ 41
Bread crumbs............................ 49
Coordinates............................... 41
Current location......................... 37
Destination input....................... 41
Favourite routes........................ 41
General settings........................ 37
Guidance alerts......................... 49
Home address........................... 41
Keyboard................................... 41
Map display............................... 37
Map manipulation...................... 37
POIs.......................................... 41
Recent destinations.................. 41
Route guidance......................... 49
Route options............................ 49
Route simulation....................... 37
Route tracking........................... 49
TMC stations............................. 49
Traffic incidents......................... 49
Turn list..................................... 49
Voice prompts........................... 49
Waypoint trip............................. 41
Navigation system........................ 36
Navigation volume........................ 19
O
Operation...................................... 65
AUX........................................... 33
Bluetooth music......................... 33
CD............................................. 30
Infotainment system.................. 14
Menu......................................... 16
Navigation system..................... 37
Phone........................................ 65
Radio......................................... 23
USB..................................... 33, 34
P
Pairing.......................................... 63
Phone
Bluetooth................................... 62
Bluetooth connection................ 63
Conference call......................... 65
Emergency calls........................ 64
Functions during a call.............. 65
Phone book............................... 65
76
Recent calls............................... 65
Text messages.......................... 68
Phone book............................ 41, 65
Phone call
Initiating..................................... 65
Taking....................................... 65
Picture files................................... 31
Pictures......................................... 34
Playing audio................................ 33
POIs.............................................. 41
R
Radio
Autostore lists............................ 24
Category list.............................. 23
DAB........................................... 27
DAB announcements................ 27
Digital Audio Broadcasting........ 27
Favourite lists............................ 25
Radio Data System................... 26
RDS........................................... 26
RDS Options menu................... 26
Regional.................................... 26
Retrieving stations.............. 24, 25
Station list.................................. 23
Station search........................... 23
Storing stations................... 24, 25
TP.............................................. 26
Traffic Programme.................... 26
Waveband selection.................. 23
Radio data system (RDS) ............ 26
Regionalisation............................. 26
Route guidance............................ 49
Route simulation........................... 37
Traffic incidents............................ 49
Traffic programme........................ 26
Treble........................................... 18
Turn list......................................... 49
S
U
Smartphone.................................. 35
Software update........................... 20
Speech commands overview........ 57
Speech recognition....................... 53
Station list..................................... 23
Station search............................... 23
Switching the Infotainment
system on.................................. 14
System settings............................ 20
Display...................................... 20
Home Page............................... 20
Language.................................. 20
Software.................................... 20
Time and Date........................... 20
T
TA................................................. 26
TA volume.................................... 19
Text messages............................. 68
Theft-deterrent feature ................... 7
Time.............................................. 20
Time format.................................. 20
TMC.............................................. 49
Tone settings................................ 18
TP................................................. 26
Usage................... 14, 23, 30, 37, 54
AUX........................................... 33
Bluetooth music......................... 33
CD............................................. 30
Infotainment system.................. 14
Navigation system..................... 37
Phone........................................ 65
USB..................................... 33, 34
USB.............................................. 31
Using apps.................................... 35
V
Voice recognition.......................... 53
Volume
Audio Cue volume..................... 19
Auto volume.............................. 19
Chime volume........................... 19
Maximum startup volume.......... 19
Mute function............................. 14
Navigation volume..................... 19
Volume of traffic
announcements........................ 19
Volume settings............................ 19
77
W
Waveband selection..................... 23
Waypoint trip................................. 41
78
CD 450 / 400
Introduction .................................. 80
Radio ........................................... 90
CD Player .................................... 99
AUX input ................................... 102
USB port .................................... 103
Bluetooth music ......................... 106
Phone ........................................ 108
Index .......................................... 116
80
Introduction
Introduction
General information ..................... 80
Theft-deterrent feature ................. 81
Control elements overview .......... 82
Usage .......................................... 84
Basic operation ............................ 86
Tone settings ............................... 88
Volume settings ........................... 89
General information
The Infotainment system provides
you with state-of-the-art in-car
infotainment.
Using the FM, AM or DAB radio
functions, you may register up to
36 stations on six favourites pages.
The integrated audio player will
entertain you with audio CDs and
MP3/WMA CDs.
You can connect external data
storage devices, e.g. iPod, MP3
player, USB stick, or a portable CD
player to the Infotainment system as
further audio sources; either via cable
or via Bluetooth.
In addition, the Infotainment system is
equipped with a Phone portal that
allows for comfortable and safe use of
your mobile phone in the vehicle.
Optionally, the Infotainment system
can be operated using controls on the
steering wheel.
The well-thought-out design of the
control elements and the clear
displays enable you to control the
system easily and intuitively.
Note
This manual describes all options
and features available for the
various Infotainment systems.
Certain descriptions, including those
for display and menu functions, may
not apply to your vehicle due to
model variant, country
specifications, special equipment or
accessories.
Important information on
operation and traffic safety
9 Warning
The Infotainment system must be
used so that the vehicle can be
driven safely at all times. If in
doubt, stop the vehicle and
operate the Infotainment system
while the vehicle is stationary.
Introduction
Radio reception
Radio reception may be disrupted by
static, noise, distortion or loss of
reception due to:
● changes in distance from the
transmitter
● multipath reception due to
reflection
● shadowing
Theft-deterrent feature
The Infotainment system is equipped
with an electronic security system for
the purpose of theft deterrence.
The Infotainment system therefore
functions only in your vehicle and is
worthless to a thief.
81
82
Introduction
Control elements overview
Control panel
Introduction
1
Radio station buttons 1 - 6
7
TP
8
Activate or deactivate
radio traffic service ................ 95
d
9
Eject disc ............................. 100
CONFIG
Long press: save station ....... 91
2
Short press: select station .... 91
s
Radio: search backwards ..... 90
3
CD/MP3/WMA: skip track
backwards ........................... 100
m VOL
Press: switch on/off
Infotainment system .............. 84
4
Turn: adjust volume .............. 84
u
Radio: search forwards ......... 90
5
CD/MP3/WMA: skip track
forwards .............................. 100
FAV 1-2-3
6
Radio favourites .................... 91
AS 1-2
Autostore lists ....................... 91
System settings ..................... 84
10 INFO
Radio: Information about
the current station
CD/MP3/WMA:
Information about the
current track
11 CD slot
12 Multifunction knob
Central control for
selection and navigation in
menus ................................... 86
13 TONE
Tone settings ........................ 88
83
14 P BACK
Menu: one level back ............ 86
Input: delete last character
or entire entry ........................ 86
15 7 / i
Open telephone main menu 108
or activate/deactivate
mute function ........................ 84
16 AUX
Activate media or change
audio source ......................... 84
17 CD
Activate CD source ............... 99
18 RADIO BAND
Activate radio or change
waveband .............................. 90
84
Introduction
Steering wheel audio controls
With radio active: turn
upwards/downwards to
select next/previous
preset radio station ............... 90
With CD player active: turn
upwards/downwards to
select next/previous CD/
MP3/WMA track .................. 100
With Phone portal active
and call list open (see item
1): turn upwards/
downwards to select next/
previous entry in call list ...... 111
1
3
With Phone portal active
and calls waiting: turn
upwards/downwards to
switch between calls ........... 111
+ and -
4
Increase or reduce volume
xn
q
Short press: take phone call 108
or activate redial function .... 111
or dial number in call list ..... 111
Long press: open call list .... 111
2
or switch handsfree mode
on/off ................................... 111
SRC (Source) ........................ 84
Press: select audio source .... 84
Press: end/decline call ........ 111
or close call list .................... 111
or activate/deactivate
mute function ........................ 84
Usage
Control elements
The Infotainment system is operated
via function buttons, a multifunction
knob and menus that are shown on
the display.
Inputs are made optionally via:
● the control panel on the
Infotainment system 3 82
● audio controls on the steering
wheel 3 82
Switching the Infotainment
system on or off
Press X VOL briefly. After switching
on, the last selected Infotainment
source becomes active.
Press X VOL again to turn the system
off.
Automatic switch-off
If the Infotainment system is switched
on pressing X VOL while the ignition
is turned off, it will switch off again
automatically 10 minutes after the last
user input.
Introduction
Setting the volume
Turn m VOL. The current setting is
shown on the display.
When the Infotainment system is
switched on, the last selected volume
is set, provided this setting is lower
than the maximum startup volume
(see below).
The following inputs can be made
separately:
● the maximum startup volume
3 89
● the volume of traffic
announcements 3 89
Speed compensated volume
When speed compensated volume is
activated 3 89, the volume is
adapted automatically to make up for
the road and wind noises as you
drive.
Mute function
Press 7 / i (if Phone portal available:
press for a few seconds) to mute the
audio sources.
To cancel the mute function: turn m
VOL or press 7 / i again (if Phone
portal available: press for a few
seconds).
Volume limitation at high
temperatures
At very high temperatures inside the
vehicle, the Infotainment system
limits the maximum adjustable
volume. If necessary, the volume is
decreased automatically.
Modes of operation
Radio
Press RADIO BAND to open the radio
main menu or to change between the
different wavebands.
Press the multifunction knob to open
the waveband menus with options for
the station selection.
For a detailed description of the radio
functions 3 90.
Audio players
Press AUX once or several times to
open the USB, iPod or AUX main
menu (if available) or to switch
between these menus.
85
Press the multifunction knob to open
the relevant menus with options for
the track selection.
For a detailed description of:
● CD player functions 3 99
● AUX functions 3 102
● USB port functions 3 103
● Bluetooth music functions
3 106
Phone
Press 7 / i briefly to open the
telephone menu.
Press the multifunction knob to open
the phone menu with options for the
input and selection of numbers.
For a detailed description of the
Phone portal 3 108.
System settings
Adjusting the language
The menu texts on the Infotainment
system's display can be displayed in
various languages.
Press CONFIG to open the Settings
menu.
86
Introduction
Select Languages in the Settings
menu to display the respective menu.
Choose the desired language for the
menu texts.
Note
For a detailed description of menu
operation 3 86.
Time and date settings
Find a detailed description in your
Owner's manual.
Basic operation
Multifunction knob
The multifunction knob is the central
control element for the menus.
Turn the multifunction knob:
● to mark a menu option
● to set a numeric value
Press the multifunction knob:
● to select or activate the marked
option
● to confirm a set value
● to switch a system function on/off
P BACK button
Press P BACK briefly:
● to exit a menu
● to return from a submenu to the
next higher menu level
● to delete the last character in a
character sequence
Press and hold P BACK for a few
seconds to delete the entire entry.
Examples of menu operation
Turn the multifunction knob to move
the cursor (= coloured background) to
the desired option.
Press the multifunction knob to select
the marked option.
Submenus
An arrow on the right-hand edge of
the menu indicates that after
selection of the option a submenu
with further options will be opened.
Activating a setting
Selecting an option
Turn the multifunction knob to mark
the desired setting.
Press the multifunction knob to
activate the setting.
Introduction
87
Setting a value
Adjusting a setting
Switching a function on or off
Turn the multifunction knob to change
the current value of the setting.
Press the multifunction knob to
confirm the set value.
The cursor then switches to the next
value. If all values are set, you are
automatically returned to the next
higher menu level.
Turn the multifunction knob to adjust
the setting.
Press the multifunction knob to
confirm the setting.
Turn the multifunction knob to mark
the function to be switched on or off.
Press the multifunction knob to switch
between the settings On and Off.
88
Introduction
Entering a character sequence
Tone settings
Selecting a tone style
In the tone settings menu, the tone
characteristics can be set separately
for each radio waveband and each
audio player source.
Press TONE to open the tone settings
menu.
Scroll through the list and select EQ
(Equaliser). The EQ presets menu is
displayed.
Setting bass, midrange, and
treble
To enter character sequences, e.g.
PIN codes or telephone numbers:
Turn the multifunction knob to mark
the desired character.
Press the multifunction knob to
confirm the marked character.
The last character in the character
sequence can be deleted by selecting
k on the display or pressing P
BACK on the instrument panel.
Pressing and holding P BACK
deletes the entire entry.
To change the position of the cursor
in the character sequence already
entered, select ◀ or ▶ on the display.
Scroll through the list and select
Bass, Midrange or Treble.
Set the desired value for the selected
option.
Setting the volume distribution
between front and rear
Scroll through the list and select
Fader.
Set the desired value.
Setting the volume distribution
between right and left
Scroll through the list and select
Balance.
Set the desired value.
The displayed options offer optimised
bass, middle, and treble presettings
for the relevant style of music.
Select the desired option.
Setting an individual setting to "0"
Select the desired option and press
the multifunction knob for a few
seconds.
The value is reset to "0".
Introduction
Setting all settings to "0" or "OFF"
Press TONE for a few seconds.
All values are reset to "0", the EQ
preset is set to "OFF".
Volume settings
Adjusting the speed
compensated volume
Press CONFIG to open the Settings
menu.
Select Radio settings and then Auto
volume control.
The Auto volume control function can
be deactivated or the degree of the
volume adaptation can be selected in
the menu displayed.
Select the desired option.
Adjusting the maximum startup
volume
Press CONFIG to open the Settings
menu.
Select Radio settings and then
Maximum startup volume.
Set the desired value.
Adjusting the volume of traffic
announcements
The volume of traffic announcements
can be preset to increase or decrease
in proportion to the normal audio
volume.
Press CONFIG to open the Settings
menu.
Select Radio settings, RDS options
and then TA volume.
Set the desired value.
Adjusting the volume of the ring
tone
Press CONFIG to open the Settings
menu.
Select Phone settings, Sound &
Signals and then Ring Volume.
Set the desired value.
89
90
Radio
Radio
Usage .......................................... 90
Station search .............................. 90
Autostore lists .............................. 91
Favourite lists ............................... 91
Waveband menus ........................ 92
Radio data system (RDS) ............ 95
Digital audio broadcasting ........... 96
Usage
Station search
Activating the radio
Automatic station search
Press RADIO BAND to open the radio
main menu.
Briefly press s or u to play the
previous or next station in the station
memory.
Manual station search
Press and hold s or u. Release
the respective button when the
required frequency has almost been
reached on the frequency display.
A search is made for the next station
that can be received and it is played
automatically.
The station last played will be
received.
Selecting the waveband
Press RADIO BAND once or several
times to select the desired waveband.
The station last played in that
waveband will be received.
Note
Manual station search: If the radio
does not find a station, it switches
automatically to a more sensitive
search level. If it still does not find a
station, the frequency that was last
active is set again.
Note
FM waveband: when the RDS
function is activated, only RDS
stations 3 95 are searched for, and
Radio
when the radio traffic service (TP) is
activated, only traffic service
stations 3 95 are searched for.
Set the station to be stored.
Briefly press AS 1-2 once or several
times to switch to the desired list.
To store the station in a list position:
press the corresponding station
button 1...6 until a confirmation
message is displayed.
Manual station tuning
AM and FM radio
Turn the multifunction knob and set
the optimal reception frequency.
DAB radio
Press the multifunction knob to open
the respective waveband menu and
select DAB manual tuning. On the
pop-up frequency display, turn the
multifunction knob and set the optimal
reception frequency.
Autostore lists
The stations received best in a
waveband can be searched for and
stored automatically via the autostore
function.
Each waveband has 2 autostore lists
(AS-Stations 1, AS-Stations 2), in
each of which 6 stations can be
stored.
91
Note
Manually stored stations are
overwritten in an automatic station
storing process.
Note
The currently received station is
marked by i.
Automatic station storing
Keep AS 1-2 pressed until an
autostore message is displayed. The
12 strongest stations in the current
waveband will be stored in the 2
autostore lists.
To cancel the autostore procedure,
press the multifunction knob.
Storing stations manually
Stations can also be stored manually
in the autostore lists.
Retrieving a station
Briefly press AS 1-2 once or several
times to switch to the desired list.
Briefly press one of the station
buttons 1...6 to open the station at the
corresponding list position.
Favourite lists
Stations of all wavebands can be
stored manually in the favourite lists.
92
Radio
Retrieving a station
Briefly press FAV 1-2-3 once or
several times to switch to the desired
list.
Briefly press one of the station
buttons 1...6 to open the station at the
corresponding list position.
Defining the number of available
favourite lists
6 stations can be stored in each
favourite list. The number of available
favourite lists can be set (see below).
Note
The currently received station is
marked by i.
Storing a station
Set the station to be stored.
Briefly press FAV 1-2-3 once or
several times to switch to the desired
list.
To store the station in a list position:
press the corresponding station
button 1...6 until a confirmation
message is displayed.
Press CONFIG to open the Settings
menu.
Select Radio settings and then Radio
favourites to open the menu Max.
number of favourites pages.
Select the desired number of
available favourite lists.
Waveband menus
Alternative facilities for station
selection are available via waveband
specific menus.
Note
The following displays are shown as
examples.
Stations lists
When in a radio main menu, turn the
multifunction knob to open the
stations list of the respective
waveband.
All receivable FM, AM or DAB
stations in the current reception area
are displayed.
Radio
Note
If no station list has been created
beforehand, the Infotainment
system performs an automatic
station search.
Select the desired station.
Note
The currently received station is
marked by i.
Updating the stations lists
When in a radio main menu, press the
multifunction knob to open the
relevant waveband menu.
If the stations stored in the wavebandspecific station list can no longer be
received:
Select the menu item Update FM
stations list, Update AM stations list or
Update DAB stations list in the
respective waveband menu.
A station search is started. Once the
search is completed, the station last
received will be played.
To cancel the station search: press
the multifunction knob.
Select Favourites list. All stations
saved in the favourite lists are
displayed.
Note
If the Infotainment system features a
dual tuner, the stations lists are
continuously updated in the
background. No manual update is
required.
Select the desired station.
Note
If a waveband specific station list is
updated the corresponding category
list (if available) is also updated.
Category lists
Favourites list
Being in a radio main menu, press the
multifunction knob to open the
relevant waveband menu.
93
Note
The currently received station is
marked by i.
Numerous RDS 3 95 and DAB
3 96 stations broadcast a PTY
code, which specifies the type of
programme transmitted (e.g. news).
Some stations also change the PTY
code depending on the content
currently being transmitted.
94
Radio
The Infotainment system stores these
stations, sorted by programme type,
in the corresponding category list.
To search for a programme type
determined by station: select the
waveband specific category list
option.
A list of programme types currently
available is displayed.
The currently received DAB service
(programme) is interrupted when any
announcement of previously
activated categories is pending.
Activating announcement categories
When being in the DAB menu, select
DAB announcements to display the
respective menu.
Select the desired station.
The category list is also updated,
when the corresponding waveband
specific station list is updated.
Note
The currently received station is
marked by i.
DAB announcements
Select the desired programme type.
A list of stations is displayed that
transmit a programme of the selected
type.
Besides their music programmes,
numerous DAB stations 3 96
broadcast various announcement
categories.
Activate the desired announcement
categories.
Several announcement categories
can be selected at the same time.
Note
The following options are only
available, if RDS is set to On.
Radio
Radio data system (RDS)
RDS is a service of FM stations that
considerably facilitates the finding of
the desired station and its fault-free
reception.
Select Radio settings and then RDS
options.
Advantages of RDS
●
●
●
●
On the display, the programme
name of the set station appears
instead of its frequency.
During a station search, the
Infotainment system tunes in to
RDS stations only.
The Infotainment system always
tunes into the best receivable
broadcasting frequency of the set
station by means of AF
(Alternative Frequency).
Depending on the station that is
received, the Infotainment
system displays radio text that
can contain e.g. information
about the current programme.
Configuring RDS
Press CONFIG to open the Settings
menu.
Set RDS to On or Off.
Note
If RDS is switched off, it will be
automatically switched on again
when a radio station is changed (by
search function or preset button).
Note
The following options are only
available if RDS is set to On.
95
RDS options
Switching regionalisation on and off
At certain times some RDS stations
broadcast regionally different
programmes on different frequencies.
Set Regional to On or Off.
If regionalisation is switched on, only
alternative frequencies (AF) with the
same regional programmes are
selected.
If regionalisation is switched off,
alternative frequencies of the stations
are selected without regard to
regional programmes.
RDS scrolling text
Some RDS stations hide the
programme name in the display line
in order to display additional
information.
To prevent additional information
being displayed:
Set Text scroll freeze to On.
Radio text
If the RDS function is activated and a
RDS station is currently received,
information about the current
96
Radio
programme and the music track
currently playing are displayed below
the programme name.
To show or hide the information, set
Radio text to On or Off.
●
●
TA volume
The volume of traffic announcements
(TA) can be preset. For a detailed
description 3 89.
●
Radio traffic service
●
(TP = Traffic Programme)
Radio traffic service stations are RDS
stations that broadcast traffic news.
Switching the radio traffic service on
and off
To switch the traffic announcement
standby facility of the Infotainment
system on and off:
Press TP.
● If the radio traffic service is
switched on, [ ] is displayed in the
radio main menu.
● Only radio traffic service stations
are received.
If the current station is not a radio
traffic service station, a search is
started automatically for the next
radio traffic service station.
If a radio traffic service station
has been found, [TP] is displayed
in the radio main menu.
Traffic announcements are
played at the preset TA volume
3 89.
If the radio traffic service is
switched on, CD/MP3 playback is
interrupted for the duration of the
traffic announcement.
The traffic announcement is
cancelled, but the radio traffic service
remains switched on.
Digital audio broadcasting
DAB broadcasts radio stations
digitally.
DAB stations are indicated by the
programme name instead of the
broadcasting frequency.
Listening to traffic announcements
only
Switch on the radio traffic service and
completely turn down the volume of
the Infotainment system.
Blocking out traffic announcements
To block out a traffic announcement,
e.g. during CD/MP3 playback:
Press TP or the multifunction knob to
confirm the cancelling message on
the display.
General information
●
With DAB, several radio
programmes (services) can be
broadcasted on a single
ensemble.
Radio
●
●
●
●
●
Besides high-quality digital audio
services, DAB is also able to
transmit programme-associated
data and a multitude of other data
services including travel and
traffic information.
As long as a given DAB receiver
can pick up the signal sent out by
a broadcasting station (even if
the signal is very weak), sound
reproduction is ensured.
In the event of poor reception, the
volume is reduced automatically
to avoid the output of
disagreeable noises.
If the DAB signal is too weak to
be picked up by the receiver,
reception is interrupted
completely. This incident can be
avoided by activating Auto
ensemble linking and/or Auto
linking DAB-FM in the DAB
settings menu.
Interference caused by stations
that are on nearby frequencies (a
phenomenon that is typical of AM
and FM reception) does not
occur with DAB.
●
●
If the DAB signal is reflected by
natural obstacles or buildings,
the reception quality of DAB is
improved, whereas AM or FM
reception is considerably
impaired in such cases.
When DAB reception is enabled,
the FM tuner of the Infotainment
system remains active in the
background and continually
searches for the best receivable
FM stations. If TP 3 95 is
activated, traffic announcements
of the FM station which is
currently best receivable are
issued. Deactivate TP, if DAB
reception should not be
interrupted by FM traffic
announcements.
Configuring DAB
Press CONFIG.
Select Radio settings and then DAB
settings.
The following options are available in
the configuration menu:
97
Auto ensemble linking
With this function activated, the
device switches over to the same
service (programme) on another DAB
ensemble when the DAB signal is too
weak to be picked up by the receiver.
Set the function to On or Off.
Auto linking DAB-FM
With this function activated, the
device switches over to a
corresponding FM station of the
active DAB service when the DAB
signal is too weak to be picked up by
the receiver.
Set the function to On or Off.
Dynamic audio adaption
With this function activated, the
dynamic range of the DAB signal is
reduced. That means the level of the
loud sounds is reduced and the level
of the quiet sounds is increased.
Therefore, the volume of the
Infotainment system can be raised to
a point where the quiet sounds are
audible, without the loud sounds
being too loud.
Set the function to On or Off.
98
Radio
Band selection
Select Band selection to display the
respective menu.
To define which DAB wavebands are
to be received by the Infotainment
system, activate one of the options:
L-Band: 1452 - 1492 MHz, earth and
satellite radio
Band III: 174 - 240 MHz, earth radio
Both
CD Player
CD Player
General information
General information ..................... 99
Usage ........................................ 100
Important information
The Infotainment system's CD player
can play audio CDs and MP3/
WMA CDs.
●
Caution
Under no circumstances place
single-CDs with a diameter of
8 cm or shaped CDs in the audio
player.
You must not put any stickers on
CDs. These discs can get jammed
in the CD drive and ruin the player.
Replacement of the device will
then be necessary.
●
●
The following CD formats can be
used:
CD-ROM Mode 1 and Mode 2
CD-ROM XA Mode 2, Form 1 and
Form 2
The following file formats can be
used:
ISO 9660 Level 1, Level 2
(Romeo, Joliet)
●
●
●
●
99
MP3 and WMA files written in any
format other than listed above
may not play correctly and their
file names and folder names may
not be displayed correctly.
Audio CDs with copy protection,
which are not in compliance with
the audio CD standard, may not
play correctly or not at all.
Self-recorded CD-Rs and CDRWs are more vulnerable to
mishandling than prerecorded
CDs. Correct handling,
especially in the case of selfrecorded CD-Rs and CD-RWs,
must be ensured (see below).
Self-recorded CD-Rs and CDRWs may not play correctly or not
at all. In such cases it is not the
equipment that is at fault.
On mixed mode CDs (audio
tracks and compressed files, e.g.
MP3, are stored), the audio
tracks part and the compressed
files part can be played
separately.
Avoid leaving fingerprints when
you change CDs.
100
●
●
●
●
●
CD Player
Put CDs back in their sleeves
immediately after removing them
from the CD player in order to
protect them from damage and
dirt.
Dirt and liquids on CDs can
smear the lens of the CD player
inside the device and cause
faults.
Protect CDs from heat and direct
sunlight.
The following restrictions apply to
MP3/WMA CDs:
Bit rate: 8 kbit/s - 320 kbit/s
Sampling frequency: 48 kHz,
44.1 kHz, 32 kHz (for MPEG-1)
and 24 kHz, 22.05 kHz, 16kHz
(for MPEG-2)
The following restrictions apply to
the data stored on an MP3/
WMA CD:
Number of tracks: max. 999
Number of tracks per folder level:
max. 512
Folder structure depth: max.
10 levels
Note
This chapter deals only with playing
MP3 files since the operation for
MP3 and WMA files is identical.
When a CD with WMA files is loaded
MP3 related menus are displayed.
Usage
Starting CD playback
Press CD once or several times to
open the CD or MP3 main menu.
Depending on the data stored on the
audio CD or MP3 CD, differing
information about the CD and the
current music track will be shown on
the display.
Inserting a CD
Insert a CD with the printed side
facing up into the CD slot until it is
drawn in.
Note
If a CD is inserted, 0 is shown on the
display.
Skipping to the next or previous
track
Briefly press s or u.
Fast forward or rewind
Press s or u and hold them
down to fast forward or fast rewind the
current track.
If there is a CD in the CD player, CD
playback is started.
Selecting tracks using the audio
CD menu
Press the multifunction knob to open
the CD menu.
CD Player
Track list
To select a track on the CD: select
Track list and then select the desired
track.
Folders
To select a track from a folder: select
Folders. A list of the folders stored on
the CD is displayed.
Select one of the folders and then
select the desired track.
Shuffle songs
To play all tracks in a random order:
set this function to On.
Note
If this function is activated, 2 is
shown in the respective main menu.
Repeat
To repeatedly listen to a track: set this
function to On.
Note
If this function is activated, 1 is
shown in the respective main menu.
Note
This menu item is only available if an
MP3 CD is inserted.
Search...
To open a menu for track search and
selection: select Search....
Select one of the categories and then
select the desired track.
Note
This menu item is only available if an
MP3 CD is inserted.
Removing a CD
Press d.
The CD is pushed out of the CD slot.
101
If the CD is not removed after
ejection, it will be drawn back in again
automatically after a few seconds.
102
AUX input
AUX input
General information ................... 102
Usage ........................................ 102
General information
On the control panel of the
Infotainment system 3 82, there is an
AUX input for the connection of
external audio sources.
It is possible, for example, to connect
a portable CD player with a 3.5 mm
jack plug to the AUX input.
Note
The socket must always be kept
clean and dry.
Usage
Press AUX once or several times to
activate the AUX mode.
Turn m VOL of the Infotainment
system to adjust the volume.
All other functions can be operated
only via the control elements of the
audio source.
USB port
USB port
General information ................... 103
Playing saved audio files ........... 104
General information
●
In the centre console below the
climate controls there is a USB socket
for the connection of external audio
data sources.
●
Note
The socket must always be kept
clean and dry.
An MP3 player, USB drive, SD card
(via USB connector/adapter), or iPod
can be connected to the USB port.
When connected to the USB port,
various functions of the above
devices can be operated via the
controls and menus of the
Infotainment system.
Note
Not all MP3 player, USB drive, SD
card or iPod models are supported
by the Infotainment system.
Important information
●
The external devices connected
to the USB port must comply with
the USB Mass Storage Class
specification (USB MSC).
●
●
●
●
103
Devices connected via USB are
supported according to USB
Specification V 2.0. Maximum
supported speed: 12 Mbit/s.
Only devices with a FAT16/
FAT32 file system are supported.
Hard disk drives (HDD) are not
supported.
USB hubs are not supported.
The following file formats can be
used:
ISO9660 Level 1, Level 2
(Romeo, Joliet)
MP3 and WMA files written in
another format than listed above
may not play correctly, and their
file names and folder names may
not be displayed correctly.
The following restrictions apply to
the files stored on the external
device:
Bit rate: 8 kbit/s - 320 kbit/s
Sampling frequency: 48 kHz,
44.1 kHz, 32 kHz (for MPEG-1)
104
●
USB port
and 24 kHz, 22.05 kHz, 16kHz
(for MPEG-2)
The following restrictions apply to
the data stored on external
devices connected to the USB
port:
Number of tracks: max. 999
Number of tracks per folder level:
max. 512
Folder structure depth: max.
10 levels
WMA files with Digital Rights
Management (DRM) from online
music shops cannot be played.
WMA files can only be played
safely, if they were created with
Windows Media Player version 9
or later.
Applicable playlist
extensions: .m3u, .pls, .wpl
Playlist entries must be in the
form of relative paths.
The system attribute for folders/
files that contain audio data must
not be set.
Playing saved audio files
Press AUX once or several times to
activate the MP3 or iPod mode.
Playback of the audio data stored on
the device is started automatically.
Shuffle songs
To play all tracks in a random order:
set this function to On.
Using the device-specific menu
Press the multifunction knob to open
the menu of the device currently
connected.
Note
If this function is activated, 2 is
shown in the respective main menu.
Repeat
To repeatedly listen to a track: set this
function to On.
Note
If this function is activated, 1 is
shown in the respective main menu.
USB port
Folders
To select a track from a folder: select
Folders. A list of the folders stored on
the device is displayed.
Select one of the folders and then
select the desired track.
Note
This menu item is not available, if an
iPod is connected.
Search...
To open a menu for track search and
selection: select Search....
Select one of the categories and then
select the desired track.
Removing the device
To safely remove the device, select
Remove USB or Eject iPod and then
disconnect the device.
105
106
Bluetooth music
Bluetooth music
General information ................... 106
Operation ................................... 106
General information
Operation
Bluetooth enabled audio sources
(e.g. music mobile phones, MP3
players featuring Bluetooth, etc.)
which support the Bluetooth music
protocol A2DP can be connected
wirelessly to the Infotainment system.
Prerequisites
Important information
●
●
●
The Infotainment system only
connects to Bluetooth devices
that support A2DP (Advanced
Audio Distribution Profile)
version 1.2 or higher.
The Bluetooth device must
support AVRCP (Audio Video
Remote Control Profile) version
1.0 or higher. If the device does
not support AVRCP, only the
volume can be controlled via the
Infotainment system.
Before connecting the Bluetooth
device to the Infotainment
system, become acquainted with
its user guide for Bluetooth
functions.
The following prerequisites must be
met in order to use the Bluetooth
music mode of the Infotainment
system:
● The Bluetooth function of the
Infotainment system must be
activated 3 109.
● The Bluetooth function of the
external Bluetooth audio source
must be activated (see user
guide of the device).
● Depending on the external
Bluetooth audio source, it may be
required to set the device to
"visible" (see user guide of the
device).
● The external Bluetooth audio
source must be paired and
connected to the Infotainment
system 3 109.
Activating the Bluetooth music
mode
Press AUX once or several times to
activate the Bluetooth music mode.
Bluetooth music
Bluetooth music playback must be
started and paused/stopped via the
Bluetooth device.
Operation via Infotainment
system
Adjusting the volume
The volume can be adjusted via the
Infotainment system 3 84.
Skipping to previous or next track
Briefly press s or u on the
control panel of the Infotainment
system.
107
108
Phone
Phone
General information ................... 108
Bluetooth connection ................. 109
Emergency call .......................... 111
Operation ................................... 111
Mobile phones and CB radio
equipment .................................. 115
General information
The Phone portal provides you with
the possibility of having mobile phone
conversations via a vehicle
microphone and the vehicle
loudspeakers as well as operating the
most important mobile phone
functions via the Infotainment system
in the vehicle. To be able to use the
Phone portal, the mobile phone must
be connected to the Infotainment
system via Bluetooth.
Not all Phone portal functions are
supported by every mobile phone.
The possible phone functions depend
on the relevant mobile phone and
network provider. You will find further
information on this in the operating
instructions for your mobile phone or
you can enquire about them with your
network provider.
Important information for
operation and traffic safety
9 Warning
Mobile phones have effects on
your environment. For this reason
safety regulations and directions
have been prepared. You should
be familiar with the related
directions before you use the
telephone function.
9 Warning
Use of the hands-free facility while
driving can be dangerous because
your concentration is reduced
when telephoning. Park your
vehicle before you use the handsfree facility. Follow the stipulations
of the country in which you find
yourself at present.
Do not forget to follow the special
regulations that apply in specific
areas and always switch off the
mobile phone if the use of mobile
phones is prohibited, if
Phone
interference is caused by the
mobile phone or if dangerous
situations can occur.
Bluetooth
The Phone portal is certified by the
Bluetooth Special Interest Group
(SIG).
You will find further information about
the specification on the Internet at
http://www.bluetooth.com
Find a detailed description in the
operating instructions for the mobile
phone.
Activating Bluetooth
Press CONFIG to open the Settings
menu.
Select Bluetooth settings and then
Bluetooth.
As soon as the Phone portal of the
Infotainment system is detected, it
appears in the device list of your
Bluetooth device. Select the Phone
portal.
Upon request, enter the PIN code on
your Bluetooth device. The devices
are paired and connected.
Bluetooth connection
Bluetooth is a radio standard for the
wireless connection of e.g. a
telephone with other devices. Data
such as a telephone book, call lists,
the network operator's name, and
field strength can be transferred. The
functionality can be restricted
depending on the telephone type.
To be able to set up a Bluetooth
connection with the Phone portal, the
Bluetooth function of the mobile
phone must be activated and the
mobile phone must be set to "visible".
109
Select Activation and then On.
Pairing a Bluetooth device
Press CONFIG to open the Settings
menu. Select Bluetooth settings and
then Add device (Handsfree).
The following display is shown.
Note
Your mobile phone book will be
downloaded automatically. The
presentation and order of the
telephone book entries may be
different on the Infotainment
system's display and the mobile
phone's display.
110
Phone
If the Bluetooth connection has been
successfully performed: in case
another Bluetooth device had been
connected to the Infotainment
system, this device is now
disconnected from the system.
If the Bluetooth connection failed:
start the procedure described above
again or consult the user guide of the
Bluetooth device.
Select Bluetooth settings and then
Device list. A list of all Bluetooth
devices currently paired to the
Infotainment system is displayed.
Removing a paired device
Note
A maximum of 5 devices can be
paired with the Infotainment system.
Changing the Bluetooth code
Press CONFIG to open the Settings
menu.
Select Bluetooth settings and then
Change Bluetooth code.
Enter the desired four-digit PIN code
and confirm your input with OK.
Connecting another paired device
Press CONFIG to open the Settings
menu.
Select the paired device. A submenu
is displayed.
Select Disconnect to disconnect the
device.
Select the desired device. A submenu
is displayed.
Select Select to establish the
connection.
Disconnecting a device
Press CONFIG to open the Settings
menu.
Select Bluetooth settings and then
Device list. A list of all Bluetooth
devices currently paired to the
Infotainment system is displayed.
Press CONFIG to open the Settings
menu.
Select Bluetooth settings and then
Device list. A list of all Bluetooth
devices currently paired to the
Infotainment system is displayed.
Select the desired device. A submenu
is displayed.
If the device is connected, it must be
disconnected first (see above).
Select Delete to remove the device.
Restoring the factory defaults
The phone settings, e.g. the device
list, the Bluetooth code, and the ring
tone, can be reset to the factory
defaults.
Press CONFIG to open the Settings
menu. Select Bluetooth settings and
then Restore factory settings.
Phone
The submenu prompts you with a
question. To reset all values to the
factory defaults, select Yes.
Emergency call
9 Warning
Connection setup cannot be
guaranteed in all situations. For
this reason you should not rely
exclusively on a mobile phone
when a vitally important
communication (e.g. a medical
emergency) is concerned.
In some networks it may be
necessary for a valid SIM card to
be properly inserted in the mobile
phone.
9 Warning
Bear in mind that you can make
and receive calls with the mobile
phone, if it is in a service area with
a sufficiently strong signal. Under
certain circumstances emergency
calls cannot be made on all mobile
phone networks; it is possible that
they cannot be made when certain
network services and/or telephone
functions are active. You can
enquire about this with the local
network operators.
The emergency call number can
differ depending on the region and
country. Please enquire
beforehand about the correct
emergency call number for the
relevant region.
Making an emergency call
Dial the emergency call number (e.g.
112).
The telephone connection to the
emergency call centre is set up.
Answer when the service personnel
questions you about the emergency.
9 Warning
Do not end the call until you are
requested to do so by the
emergency call centre.
111
Operation
As soon as a Bluetooth connection
has been set up between your mobile
phone and the Infotainment system,
you can also operate many functions
of your mobile phone via the
Infotainment system.
Via the Infotainment system, you can,
e.g., set up a connection to the
telephone numbers stored in your
mobile phone or change the
telephone numbers.
Note
In the handsfree mode, mobile
phone operation is still possible, e.g.
taking a call or adjusting the volume.
After the setup of a connection
between the mobile phone and the
Infotainment system, mobile phone
data is transmitted to the Infotainment
system. This can take several
minutes depending on the phone
model. During this period, operation
of the mobile phone is possible via the
Infotainment system only to a limited
extent.
112
Phone
Note
Not every mobile phone supports all
functions of the Phone portal.
Therefore, deviations from the range
of functions described below are
possible.
Prerequisites
The following prerequisites must be
met in order to use the handsfree
mode of the Infotainment system:
● The Bluetooth function of the
Infotainment system must be
activated 3 109.
● The Bluetooth function of the
mobile phone must be activated
(see user guide of the device).
● The mobile phone must be set to
"visible" (see user guide of the
device).
● The mobile phone must be paired
to the Infotainment system
3 109.
Activating the handsfree mode
Press y / @ on the control panel of the
Infotainment system. The phone main
menu is displayed.
Note
If there is no mobile phone
connected to the Infotainment
system, No phone available is
displayed. For a detailed description
of how to establish a Bluetooth
connection 3 109.
Many functions of the mobile phone
can now be controlled via the phone
main menu (and associated
submenus) and via the phonespecific controls on the steering
wheel.
Initiating a phone call
Entering a number manually
When being in the phone main menu,
press the multifunction knob to open
the Phone Menu.
Select Enter number. The following
screen is displayed.
Enter the desired number and select
y on the display to start dialling.
Note
To open the Search screen of the
phone book, select 4.
Using the phone book
Note
The phone book may only be
downloaded if this function is
supported by your mobile phone.
For further information, please
consult the user guide of your mobile
phone.
The phone book contains contact
names and numbers.
Phone
113
Updating the phone book
If entries in the phone book of your
mobile phone have changed, you
may update the phone book entries
first downloaded to the Infotainment
system.
Press 7 / i to display the Phone
Menu. Select Phone book and then
Update. You are prompted with a
question. Select Yes to start the
updating process.
When being in the phone main menu,
press the multifunction knob to open
the Phone Menu.
Select Phone book. Select Search
and then First Name or Last Name.
The following screen is displayed.
As on a telephone or mobile phone,
the letters are organised in
alphabetical groups on the display:
abc, def, ghi, jkl, mno, pqrs, tuv, and
wxyz.
Select the desired group of letters.
The phone book is displayed showing
the entries starting with one of the
letters in the letter group.
Scroll through the list and select the
desired entry name.
Scroll through the list of phone
numbers and select the desired
number. The corresponding phone
number is dialled.
Deleting the phone book
To delete all entries in the phone book
on the Infotainment system, press 7 /
i. Select Phone book and then
Delete all.
Using the call lists
All incoming, outgoing, or missed
calls are registered in corresponding
call lists.
When being in the phone main menu,
press the multifunction knob to open
the Phone Menu. Select Call lists.
The following screen is displayed.
114
Phone
Press xn on the steering wheel to
exit the Redial menu. You may
optionally use the multifunction knob
to select No on the display.
Incoming phone call
Select the desired call list, e.g.
Missed calls. A menu with the
corresponding call list is displayed.
To initiate a phone call: select the
desired list entry. The corresponding
phone number is dialled.
Redialling a phone number
The last dialled phone number can be
redialled.
Press 7 on the steering wheel to
open the Redial menu.
Press 7 again to start dialling.
If an audio mode, e.g. the radio or CD
mode, is active at the time of an
incoming call, the relating audio
source will be muted and stay muted
until the call ends.
To answer the call: select Answer on
the display.
To reject the call: select Decline on
the display.
Second incoming phone call
If a second phone call comes in
during an ongoing call, a message is
displayed.
To answer the second call and end
the ongoing call: select Answer on the
display.
To reject the second call and continue
the ongoing call: select Decline on the
display.
Changing the ring tone
Press CONFIG to open the Settings
menu.
Select Phone settings, Sound &
Signals and then Ring tone. A list of
all ring tones available is displayed.
Select the desired ring tone.
For a detailed description on the ring
tone volume 3 89.
Functions during a phone call
During an ongoing phone call, the
phone main menu is displayed.
Select Menu on the display to open
the menu Connected.
Select Hang up on the display to end
the call.
Activating the private mode
In the Connected menu, select
Private call to switch the call to the
mobile phone.
To switch the call back to the
Infotainment system, select Menu on
the display and then Transfer call.
Phone
Deactivating/activating the
microphone
In the Connected menu, set Mute
Mic to On. The caller cannot hear you
any more.
To reactivate the microphone: set
Mute Mic to Off again.
Mobile phones and CB radio
equipment
Installation instructions and
operating guidelines
The vehicle specific installation
instructions and the operating
guidelines of the mobile phone and
handsfree manufacturer must be
observed when installing and
operating a mobile telephone. Failure
to do so could invalidate the vehicle
type approval (EU directive 95/54/
EC).
Recommendations for fault-free
operation:
● The exterior antenna needs to be
professionally installed to obtain
the maximum range possible.
● Maximum transmission power:
10 watts.
● The mobile phone needs to be
installed in a suitable spot.
Consider relevant note in the
Owner's manual, section Airbag
system.
Seek advice on predetermined
installation points for the external
antenna or equipment holder and
ways of using devices with a
transmission power exceeding
10 watts.
Use of a handsfree attachment
without external antenna with mobile
telephone standards
GSM 900/1800/1900 and UMTS is
only permitted if the maximum
transmission power of the mobile
telephone is 2 watts for GSM 900 or
1 watt for the other types.
115
For reasons of safety, do not use the
phone while driving. Even use of a
handsfree set can be a distraction
while driving.
9 Warning
Operation of radio equipment and
mobile telephones which fail to
meet above mentioned mobile
telephone standards is only
permitted using an antenna
located outside of the vehicle.
Caution
Mobile telephones and radio
equipment may lead to
malfunctions in the vehicle
electronics when operated inside
the vehicle with no exterior
antenna, unless the above
mentioned regulations are
observed.
116
Index
A
Activating Bluetooth music......... 106
Activating CD player................... 100
Activating the AUX function........ 102
Activating the handsfree Phone
mode....................................... 111
Activating the radio....................... 90
Activating the USB function........ 104
Autostore lists............................... 91
Retrieving stations..................... 91
Storing stations......................... 91
Auto volume control...................... 89
AUX input
Activating................................. 102
Adjusting the volume............... 102
General information................ 102
Operation................................ 102
B
Basic operation............................. 86
Blocking out traffic
announcements........................ 95
Bluetooth
Bluetooth connection.............. 109
Bluetooth music....................... 106
Phone...................................... 111
Bluetooth connection.................. 109
Bluetooth music
Activating................................. 106
General information................ 106
Operation................................ 106
Prerequisites........................... 106
C
Call
Functions during a call............ 111
Incoming call........................... 111
Initiating a phone call.............. 111
Ring tone................................. 111
Call lists...................................... 111
Category list.................................. 92
CD menu.................................... 100
CD player
Activating................................. 100
CD menu................................. 100
General information................... 99
Inserting a CD......................... 100
Removing a CD....................... 100
Starting CD playback.............. 100
Usage...................................... 100
Control elements
Infotainment system.................. 82
Phone...................................... 108
Steering wheel.......................... 82
Control elements overview........... 82
D
DAB.............................................. 96
Date settings................................. 84
Digital audio broadcasting............ 96
Dynamic audio adaption............... 96
117
E
Emergency call........................... 111
F
Favourite lists......................... 91, 92
Retrieving stations..................... 91
Storing stations......................... 91
G
General information..... 99, 102,
103, 106, 108
AUX input................................ 102
Bluetooth music....................... 106
CD player.................................. 99
Infotainment system.................. 80
Phone...................................... 108
USB port.................................. 103
I
Infotainment control panel............ 82
L
Language settings........................ 84
M
Maximum startup volume............. 89
Menu operation............................. 86
Mobile phones and CB radio
equipment .............................. 115
Multifunction knob......................... 86
Mute.............................................. 84
O
Operation............................ 106, 111
AUX input................................ 102
Bluetooth music....................... 106
CD player................................ 100
Menu......................................... 86
Phone...................................... 111
Radio......................................... 90
USB port.................................. 104
P
Phone
Activating................................. 111
Bluetooth................................. 108
Bluetooth connection.............. 109
Call lists................................... 111
Control elements..................... 108
Dialling a number.................... 111
Emergency calls...................... 111
Functions during a call............ 111
General information................ 108
Important information.............. 108
Incoming call........................... 111
Phone book............................. 111
Prerequisites........................... 111
Redialling a phone number..... 111
Selecting the ring tone............ 111
Phone book................................ 111
Playing saved audio files............ 104
R
Radio
Activating................................... 90
Autostore lists............................ 91
Band selection.......................... 96
Category list.............................. 92
Configuring DAB....................... 96
Configuring RDS....................... 95
DAB announcements................ 92
Digital audio broadcasting
(DAB)........................................ 96
Dynamic audio adaption........... 96
Favourite lists...................... 91, 92
Radio data system (RDS)......... 95
Radio traffic service................... 95
Regionalisation......................... 95
Retrieving stations..................... 91
Selecting the waveband............ 90
Station lists................................ 92
Station search........................... 90
Station tuning............................ 90
Storing stations......................... 91
Traffic announcements............. 95
Updating station lists................. 92
Usage........................................ 90
Waveband menus..................... 92
Radio data system (RDS) ............ 95
Radio traffic service...................... 95
RDS.............................................. 95
Redial function............................ 111
118
Regionalisation............................. 95
Retrieving stations........................ 91
Ring tone
Ring tone volume...................... 89
Selecting the ring tone............ 111
S
Selecting the waveband............... 90
Starting CD playback.................. 100
Station lists................................... 92
Station search............................... 90
Steering wheel audio controls...... 82
Storing stations............................. 91
Switching the Infotainment
system on.................................. 84
Switching the radio on.................. 90
System settings
Language.................................. 84
Restore factory settings............ 84
Time and date........................... 84
Vehicle settings......................... 84
T
TA volume.................................... 89
Theft-deterrent feature ................. 81
Time settings................................ 84
Tone settings................................ 88
Traffic announcements................. 95
U
Updating station lists.................... 92
Usage..................... 84, 90, 100, 102
AUX input................................ 102
Bluetooth music....................... 106
CD player................................ 100
Menu......................................... 86
Phone...................................... 111
Radio......................................... 90
USB port.................................. 104
USB menu.................................. 104
USB port
Activation................................. 104
Connecting the USB device.... 103
General information................ 103
Important information.............. 103
Operation................................ 104
Removing the USB device...... 104
USB menu............................... 104
V
Volume
Auto volume control.................. 89
Maximum startup volume.......... 89
Mute function............................. 84
Ring tone volume...................... 89
Setting the volume.................... 84
Speed compensated volume.... 89
TA volume................................. 89
Volume limitation at high
temperatures............................. 84
Volume settings............................ 89
W
Waveband menus......................... 92
www.opel.com
Copyright by ADAM OPEL AG, Rüsselsheim, Germany.
The information contained in this publication is effective as of the date indicated below. Adam Opel AG reserves the right to make changes to the technical specifications, features and
design of the vehicles relative to the information in this publication as well as changes to the publication itself.
Edition: January 2016, ADAM OPEL AG, Rüsselsheim.
Printed on chlorine-free bleached paper.
KTA-2755/6-en
*KTA-2755/6-EN*
01/2016
Download PDF