SERVO 6.50 semi-mounted ploughs

SERVO 6.50
97+212.EN.0115
PÖTTINGER Semi-mounted ploughs
Output for
large areas
SERVO 6.50
The SERVO 6.50 semi-mounted ploughs combine the characteristics of
a mounted plough with those of a semi-mounted plough. Tractive force
is transferred directly to the plough beam by the main beam bearing,
whilst the land wheel is guided by a steering linkage.
Furrows
6
SERVO 6.50
Standard ploughs
7
8
9
6
SERVO 6.50 PLUS
Hydraulic cutting width adjustment
7
8
9
6
SERVO 6.50 NOVA
Hydraulic stone protection
7
8
SERVO 6.50 PLUS NOVA
Hydraulic furrow width adjustment and hydraulic stone
protection
6
7
8
All information on technical data, dimensions, weights, output, etc.
is approximate and is not binding.
3
SERVO 6.50
For tractors up to 265 kW / 360 hp
Robust headstock for long service life
The headstock consists of Cat. 3 clevis type mounting lugs, with a fold
away parking stand. The ploughs heavy duty turn over shaft is equipped
with mounted bearings which allow smooth turn over. Manoeuvres are
made easier and the tractors turning angle is increased dramatically due
to the wide angled turn over shaft.
Intelligent design
Minimum crabbing and maximum directional stability thanks to reversing
axle headstock being close to the tractor and providing ideal straight pull
line. Tractive force is transferred directly to the plough beam via the main
plough beam bearing right at the front – positive pull line similar to a
mounted plough.
„ The first plough body is positioned far forwards – compact,
manoeuvrable design.
„ The support wheel is guided by a steering linkage.
„ Quick setting of front furrow width with a large adjustment range –
mechanical or hydraulic.
Extra strong plough beam tube 7x7" / 180 x 180 mm (1)
The extremely strong plough beam, made from micro-alloyed fine grain
steel, is designed for tractors up to 265 kW / 360 hp.
„ Solid leg mountings on both sides with replace with shear bolt as
overload protection on standard and PLUS ploughs.
„ The body brackets are hardened for the hardest of work.
4
Support wheel 500/45-22.5
Set working depth using the tractor hitch and fine tune at the land
wheel – quick and easy to find the correct position with swing clips at
0.59" / 15 mm intervals. The wheel is within the path of the plough
beam – ideal for fence line ploughing.
TRACTION CONTROL
TRACTION CONTROL is available as an option to provide defined
loading of the tractor rear axle. A cylinder connected to gas
accumulators transfers constant weight to the tractor’s rear wheels.
The loading pressure can be adjusted from the tractor.
The great advantage with TRACTION CONTROL: Less wheel slip;
greater fuel savings.
„ Lighter tractors can work with more furrows – more cost effective.
„ Switches off automatically in the transport position and while turning.
Assessment of the influence of TRACTION CONTROL on fuel consumption and wheel slip:
Performance and consumption data for medium-heavy soil, working width 8.52' / 2.60 m, working depth 9.84" / 250 mm
Driving strategy
without TRACTION CONTROL
with TRACTION CONTROL
Efficiency
Performance
4.79 acres/h / 1.94 ha/h
6.67 acres/h / 2.07 ha/h
+ 0.32 acres/h / 0.13 ha/h
Diesel consumption
1.82 gal/acre / 20.5 l/ha
1.63 gal/acre / 18.4 l/ha
- 0.19 gal/acre / 2.1 l/ha
Diesel consumption
8.73 gal/h / 39.7 l/h
8.36 gal/ha / 38.0 l/h
- 0.37 gal/h / 1.7 l/h
Wheel slip
4.8 %
3.3 %
- 1.5 %
Markus Schüller, Gerhard Moitzi, Institute for Agricultural Technology, University of Soil Science Vienna
Helmut Wagentristl, Experimental Farm Groß Enzersdorf, University of Soil Science Vienna
5
SERVO 6.50
Impressive advantages
Optimum landside pressure
The large wheel absorbs lateral pressure for low drag, low wear
ploughing. Landside heels on the last furrow are standard.
Furrow width adjustment
On standard ploughs the furrow width can be adjusted in five stages
using a hole matrix on the beam and a turnbuckle on the control rod.
On the SERVO 6.50 PLUS ploughs, the furrow width is adjusted using
a hydraulic cylinder.
Front furrow width
On the standard version, the furrow width of the leading body is set
using a turnbuckle on the main beam, with hydraulic adjustment
available as an option. On SERVO 6.50 PLUS ploughs, hydraulic
adjustment is standard equipment.
„ Set the desired furrow width of the plough smoothly and swiftly.
„ Widest possible range of furrow width for the leading body – ideal
on slopes and in difficult soil conditions.
6
Powerful reversing system
The turnover shaft is equipped with large dimensioned tapered roller
bearings. The reversing operation of the plough is carried out smoothly
and reliably by two large telescopic cylinders.
„ Separate and accurate camber adjustment if completed via two
adjusting screws.
„ Easy mounting and dismounting of the plough is achieved with the
parking leg in position.
Optimal pull line
The pull line runs ideally through the rear axle because the turnover shaft
on the headstock is located so close to the tractor. This results in
minimum crabbing and maximum traction performance.
Practical hose arrangement
Hydraulic connections are made easier with coloured markers and all
hoses intuitively grouped through a hose bracket.
Safe transport
For transport, the plough is turned to the central position and both
telescopic cylinders are lockable via shut-off valves.
7
8
SERVO 6.50 PLUS
With hydraulic furrow width adjustment
Infinitely variable adjustment
SERVO 6.50 PLUS / SERVO 6.50 PLUS NOVA
On the SERVO 6.50 PLUS, furrow width is adjusted hydraulically
via the hydraulic cylinder. Unique system: The furrow width of
the leading body is set at the same time and can be fine tuned
hydraulically at the main beam bearing.
„ This provides optimum tractor efficiency and maintains excellent
ploughing results at all times.
„ All additional adjustments adapt to it correctly and automatically.
SERVO PLUS adjustment system with lever control and pivot point
located away from the plough beam.
„ Smooth adjustment thanks to long adjusting lever.
„ Protects the parallel linkage and pivot points.
The SERVO PLUS system is designed to allow hydraulic furrow width
adjustment during ploughing. The hydraulic cylinder has a check valve
so that the hoses are not under pressure during ploughing.
Durable construction
All important pivot points have the ability to be lubricated and also have
wear resistant, replaceable spring steel bushes for the highest pressure
demands.
9
10
SERVO 6.50 NOVA
Hydro-mechanical stone protection
NONSTOP ploughing in stony soil
SERVO 6.50 NOVA / SERVO 6.50 PLUS NOVA
With its variable hydraulic triggering pressure, the SERVO NOVA system
adapts the plough to different soil types. Each pair of plough bodies has
its own hydraulic accumulator which allows upward movement of up to
15.7" / 400 mm. The lubricated pivot points and additional shear bolts
guarantee a long service life.
„ Individual accumulator for each pair of bodies; the central filling
system is standard on all SERVO 6.50 NOVA ploughs.
„ Smooth, flexible triggering protects both plough and tractor.
„ The gas accumulators are mounted on the inside of the plough legs
for protection.
„ Spring-mounted disc coulters roll over rocks without the risk of
damage.
This system has a very clever triggering pressure system: The leg does
not trip until the set resistance has been reached. Then the pressure
required to trigger the leg reduces as the leg rises. This leads to no
digging or loosing of big rocks and therefore protects the whole plough.
„ On re-penetrating the soil, the pressure increases to ensure reliable
penetration in heavy, dry soil.
„ Set the trigger point quickly and easily using the pressure gauge on
the headstock.
Proven system
SERVO 6.50 NOVA ploughs with stone protection provide maximum
reassurance. Ploughing without stopping means full productivity even in
stony soil.
11
SERVO technology
Durable – Reliable – High quality
Proven plough body configuration
Body
The frog is tempered to provide maximum strength and stability for
mouldboards or slats. The single piece shares sit on a forged raised part
to give a precise, durable joint.
Large landsides for reliable plough tracking
The landsides can be used four times to ensure cost efficient use of the
parts. Landside protector standard on last body – great stability on
slopes.
Share blades (1)
Share blades made from 0.31" / 8 mm hardened fine grain steel are used
on mouldboards in the area of greatest wear. They are quick and easy to
replace.
Angle adjustment
An offset allows adjustment of body angle (2). For reliable penetration,
even on extremely hard, dry soils.
12
Share and point options
Chisel points
Single piece points are reversible for reduced operating costs. The single
piece points are manufactured from hardened boron steel and guarantee
good plough penetration in all soil conditions.
Chisel points with deposition welding available as an option.
Shares
All shares are manufactured from hardened boron steel. Increasing the
hardened wear zone extends service life by up to 50%. The 0.43" /
11 mm thick shares have a total width of 5.91" / 150 mm.
The forward taper aids good penetration and has the effect of being
self-sharpening.
Full-length share points
with powerful wear points. A large angle guarantees good penetration.
Highly suitable for stony soils and shallow ploughing.
„ Armoured share points are available as an option.
„ Recommended especially for SERVO 6.50 NOVA ploughs with
hydraulic stone protection.
Knife share
Vertical blades welded to the shares improve crumbling as they split the
furrow ridge down the middle.
„ Promotes frost action and increases post drying effect.
„ Reversible chisel points
13
SERVO technology
Durable – Reliable – High quality
DURASTAR
Hardened right through and carbonised
Hardened right through means consistent hardness across the whole
cross-section. Carbonised: Substrate material core is elastic.
Proven plough mould boards, hardened right through, guarantee
excellent results in compact soils (heathland, black-earth soil, etc.).
Mouldboards with a special carbonised layer are characterised by
impressive durability thanks to a super-hard 09" / 2.3 mm-thick surface
on both sides of the board and a more elastic core. This combination
ensures optimum ploughing results in soils with a variable or sticky
structure.
„ Longer service life than 3-layer plate.
„ Improved soil flow reduces sticking.
„ Developed and manufactured by PÖTTINGER.
„ Available for 27 Wc, 46 Wc, 36 UWc, and 39 UWc mouldboards.
Mouldboards
0.32" / 8 mm hardened fine grain steel – extremely resistant to wear.
Slatted boards
Slats 0.39" / 10 mm thick and hardened right through – extremely
resistant to wear. Gap between slats gets wider further back to prevent
stones from becoming trapped.
Armoured chisel points and chisel shares
Chisel points and shares with deposition welding are also available for
extreme wear resistance.
14
Long, curved, mouldboard
27 Wc DURASTAR (1)
Low drag resistance, well suited to working on slopes. Ideal for
ploughing meadow and flat land with good furrow clearance. Suitable for
higher forward speeds.
„ Working width up to 17.2 inch / 450 mm
„ Working depth up to 9.84 inch / 250 mm
„ Furrow clearance up to 18.9 inch / 480 mm
41 W (2)
Long, curved mould board for heavy, sticky soil. Moderate working
speed.
„ Working width up to 17.2 inch / 450 mm
„ Working depth up to 11.81 inch / 300 mm
„ Furrow clearance up to 17.2 inch / 450 mm
46 Wc DURASTAR (3)
Good crumbling effect and suitable for slopes, low drag resistance in
loam and clay soils, also light soil types. A body for high working speeds
without overlapping. Wide furrow clearance, low draft and excellent
turning of the soil ridge are the hallmarks of this mouldboard.
„ Working width up to 21.26 inch / 540 mm
„ Working depth up to 13.78 inch / 350 mm
„ Furrow clearance up to 20.87 inch / 530 mm
15
Universal body
36 UWc DURASTAR (1)
Universal mouldboard with very good furrow clearance and excellent
crumbling at normal working speed. Large quantities of harvest trash are
ploughed in tidily. A low-draft mouldboard, suitable for most soils.
„ Working width up to 9.68 inch / 500 mm
„ Working depth up to 11.81 inch / 300 mm
„ Furrow clearance up to 18.90 inch / 480 mm
39 UWc DURASTAR (2)
Large universal mouldboard with very good furrow clearance and
excellent crumbling at normal working speed. Large quantities of harvest
trash are ploughed in tidily. A low-draft mouldboard, suitable for most
soils.
„ Working width up to 21.26 inch / 540 mm
„ Working depth up to 13.78 inch / 350 mm
„ Furrow clearance up to 9.68 inch / 500 mm
16
Slatted boards
35 WSS (3)
Slatted body with strong turning characteristics, specially suitable for
peaty, medium-density and sticky soil. Especially wide furrow clearing
and excellent crumbling.
„ Working width up to 21.26 inch / 540 mm
„ Working depth up to 13.78 inch / 350 mm
„ Furrow clearance up to 20.87 inch / 530 mm
38 WWS (4)
Low-drag resistance body with curved slats for excellent crumbling
effect in medium to heavy soils (loam, clay). Good furrow clearance –
ideal for wide tyres.
„ Working width up to 21.26 inch / 540 mm
„ Working depth up to 11.81 inch / 300 mm
„ Furrow clearance up to 19.68 inch / 500 mm
17
SERVO technology
For a tidy surface and furrow
Disc options
A clean disc coulter cut guarantees precise turning of the ridge
and a clean furrow.
Disc coulters, smooth or scalloped
„ 19.68 or 23.23" / 500 or 590 mm diameter with good self-cleaning
characteristics.
„ Star-shape indentations keep disc coulters rotating.
„ Especially wide bearing spacing for highest durability.
„ Scalloped disc coulters rotate well in high levels of organic matter.
„ One bracket for Standard and PLUS ploughs.
Depth is adjusted using toothed segments.
„ Adjustable bracket.
Spring-mounted coulter disc
Spring-mounted coulter discs are available for SERVO NOVA ploughs
with overload protection.
Adjustable bracket
„ Mounting moved forward so the disc coulter is in front of the
skimmer. Plenty of space for large quantities of maize straw and
organic matter. (1)
„ Mounting moved back so the disc coulter is close to the skimmer for
light, free flowing soil and shallow ploughing. (2)
18
Knife coulter
The landside knife coulter is a cost effective alternative to the disc
coulter – from 8.66" / 220 mm working depth.
Trashboards
The alternative to skimmers for shallow ploughing and stony soil. (3)
Leg deflector
Leg deflectors improve ploughing results in large quantities of organic
matter while protecting the leg. (4)
19
SERVO technology
For a tidy surface and furrow
Skimmer adjustable without tools
Same shank for all skimmers with multi-stage depth adjustment – no
tools required. Distance from the plough body is adjustable via the hole
matrix. Each skimmer is equipped with its own shear bolt.
Suitable skimmer shapes mean there are no crop residues on
the surface after ploughing.
V1 universal skimmer
„ Suitable for all conditions including maize straw.
V1
V2
V2 maize skimmer
„ For large quantities of organic matter, catch crops and deep tillage.
V3 universal skimmer
„ Suitable for shallow working depths.
V5 maize skimmer
„ Large, high skimmer board suitable for working in high volume
harvest residues and for very deep ploughing.
V3
20
V5
Ploughing with a furrow press
„ The press is collected by the press arm's large jaw. It is hydraulically
released before the plough is reversed.
„ A five-position mounting bracket means the press can be set for
different working widths. A tension spring pivots the press arm into
the set catching position after releasing.
„ On SERVO PLUS ploughs, the catching position is maintained
precisely even if the furrow width is changed.
„ The press arm can be fixed within the tractor width for road
transport.
„ The entire press arm can be removed quickly and easily.
Furrow widener for wide tyres
Furrow wideners are available as an option for all ploughs and mould
boards. These can only be used without disc coulters.
21
SERVO
technology
SERVO 6.50
SERVO 6.50
PLUS
SERVO 6.50
NOVA
SERVO 6.50
PLUS NOVA
Furrow width, inch
12.6 / 14.96 / 16.92 / 18.90 / 21.26
9.84 – 21.26
12.6 / 14.96 / 16.92 / 18.90 / 21.26
9.84 – 21.26
Furrow width, mm
320 / 380 / 430 / 480 / 540
250 – 540
320 / 380 / 430 / 480 / 540
250 – 540
Beam cross-section, inch / mm
7.09 x 7.09 x 0.39 / 180 x 180 x 10
7.09 x 7.09 x 0.39 / 180 x 180 x 10
Body mounting (leg), inch / mm
3.15 x 1.38 / 80 x 35
3.15 x 1.38 / 80 x 35
Underbeam clearance, inch / mm
31.5 / 800, option 35.4 / 900
31.5 / 800, option 35.4 / 900
Inter-body spacing, inch / mm
40.2 / 1020
40.2 / 1020
Weight 6-furrow, lbs / kg
6658 / 3020
6878 / 3120
7716 / 3500
7959 / 3610
Weight 7-furrow, lbs / kg
7264 / 3295
7517 / 3410
8499 / 3855
8774 / 3980
Weight 8-furrow, lbs / kg
7870 / 3570
8157 / 3700
9281 / 4210
9590 / 4350
Weight 9-furrow, lbs / kg
8477 / 3845
8796 / 3990
–
–
22
SERVO
Hydraulic furrow width
adjustment of leading body
Furrow widener
TRACTION CONTROL
Subsoiler
Marker boards
and lighting
Landside protector
on all bodies
6.50
6.50 PLUS
6.50 NOVA
6.50 PLUS NOVA
= standard,
= optional
SERVO
Furrow press
extension arm
6.50
6.50 PLUS
6.50 NOVA
6.50 PLUS NOVA
= standard,
= optional
23
Your machine goes online.
All the information on your machine
easily – anytime – anywhere
Simply scan the QR code on the data plate with your smartphone or
tablet or enter your machine number at www.poettinger.at/poetpro. You
will immediately receive all the information on your machine.
„
„
„
„
Operating instructions
Optional equipment information
Brochures
Photos and videos
PÖTTINGER Landtechnik GmbH
Industriegelände 1
4710 Grieskirchen
Austria
Phone +43 7248 600-0
Fax +43 7248 600-2511
info@poettinger.at
www.poettinger.at
POETTINGER US, Inc.
393 Pilot Drive
Valparaiso, IN 46383
USA
Phone +1 219 510-5534
Fax + 1 219 707-5412
sales.us@poettinger.us
www.poettinger.us
Importer for New Zealand:
Origin Agroup
PO Box 673, 57 Hautapu Road
Cambridge
New Zealand
Phone +64 7 823 7582
info@originagroup.co.nz
www.originagroup.co.nz
Alois POTTINGER UK Ltd.
15 St Marks Road, Corby
Northamptonshire, NN18 8AN
United Kingdom
Phone +44 1536 272 220
info.uk@pottingeruk.co.uk
www.pottingeruk.co.uk
POETTINGER Australia PTY LTD
15 Fordson Road
Campbellfield, VIC 3061
Australia
Phone +61 3 9359 2969
sales.au@poettinger.com.au
www.poettinger.com.au
Importer for South Africa:
VALTRAC
Cnr. Water & Buiten Street
9585 Parys
South Africa
Phone +27 56 817 7338 7308
wynn@valtrac.co.za
www.valtrac.co.za
POETTINGER Canada Inc.
650, Route 112
St-Cesaire, PQ J0L 1T0
Canada
Phone +1 450 469 5594
Fax +1 866 417 1683
sales.canada@poettinger.ca
www.poettinger.ca
POETTINGER Ireland Ltd.
Industrial Estate
Cashel Rd., Clonmel, Co. Tipperary
Ireland
Phone +353 52 6125766
info.ie@poettinger.at
www.poettinger.ie
SERVO 6.50 EN 0716
PÖTTINGER Spare parts service
„ Worldwide network of sales and service partners.
„ Decades of spare and wear parts availability.
„ Original PÖTTINGER parts can be ordered online around the clock.
Download PDF