CX-One Software Version 4.40 Upgrade

NO:
DATE:
PC-330
May 2016
PRODUCT:
TYPE:
CX-One Software
Modification Notice
CX-One Software Packages Upgraded to Version 4.40
Effective date: May 2016 production
The following CX-One software packages will be upgraded. Please check
the changes below for specific version number information and applicable
model changes.
Affected Parts
Models
Specifications
CXONE-AL00D-V4
DVD media only( no licenses)
CXONE-AL01D-V4
DVD/1 license
CXONE-AL01D-V4-UP
DVD/1 license(upgrade model)
CXONE-AL03D-V4
DVD/3 licenses
CXONE-AL03D-V4-UP
DVD/3 licenses(upgrade model)
CXONE-AL10D-V4
DVD/10 licenses
CXONE-AL10D-V4-UP
DVD/10 licenses(upgrade model)
CXONE-AL30D-V4
DVD/30 licenses
CXONE-AL30D-V4-UP
DVD/30 licenses(upgrade model)
CXONE-AL50D-V4
DVD/50 licenses
CXONE-AL50D-V4-UP
DVD/50 licenses(upgrade model)
CXONE-ALXXD-V4
DVD/Site licenses
CXONE-ALXXD-V4-UP
DVD/Site licenses(upgrade model)
CXONE-LT01C-V4
CX-One Lite /CD/1 license
CXONE-LT01C-V4-UP
CX-One Lite /CD/1 license(upgrade model)
Highlights
•
Support for Windows 10 operating system.
•
Support for ZW-7000 displacement sensor.
See the following pages for details of differences.
1
Detail of Differences
Changes
Before the change
After the change
Version
Ver.4.34
Version
Ver.4.40
Support OS
Microsoft Windows 8, 8.1
Microsoft Windows 7
Microsoft Windows Vista
Microsoft Windows XP(SP3 later)
Support OS
Microsoft Windows 10 is supported.
The functions on the
right were not
provided.
Microsoft Windows 10
Microsoft Windows 8, 8.1
Microsoft Windows 7
Microsoft Windows Vista
Microsoft Windows XP(SP3 later)
CX-Programmer Ver.9.61
[New functions]
 Provided a function to prevent entry of a wrong password by adding a field for
entering the password again for confirmation to the PLC Properties window.
 Provided a function to change all input response time settings at the same time in
the Unit Settings of PLC System Setup. (CS/CJ-series PLCs)
 Added a message to display cautions when changing the model from CV to
CS/CJ.
[Improved functions]
 Solved the problem that an error occurred when building an FQM1.
 Solved the problem that an error occurred when changing all variables to which
addresses are automatically allocated at the same time.
 Solved the problem that an error occurred when copying an item in the Watch
Window to a different session of CX-Programmer.
 Solved the problem that operations might become incorrect if an array variable
was used in a TIMER instruction in an ST program.
 Solved the problem that an error occurred when a variable starting with DR was
specified in data trace operations.
 Solved the problem that operations were disabled when data transfer of a program
with extended protection to the simulator started from Windows menu failed.
CX-Simulator Ver.1.997
[Improved functions]
 Changed the help file format from HLP to CHM.
CX-Designer Ver.3.690
[New functions]
 Supported the Modbus TCP.
[Improved functions]
 Solved the problem that causes an error when a project with the size of more than
30MB is uploaded via USB.
 Supported the reuse in cases where the array definitions differ between source
and destination of reuse.
 Solved the problem that triggers an invalid behavior when running a macro
immediately after executing a key button such as a multifunction object in the test
mode.
 Solved the problem that, while attempting to import variables from Sysmac Studio,
allows import of the variables which are not supposed to be registered in CXDesigner.
2
Before the change
The functions on the
right were not
provided.
After the change
CX-Protocol Ver.1.991
[Improved functions]
 Solved the problem that caused GPF.
CX-Integrator Ver.2.61
[Improved functions]
 Solved the problem that caused GPF.
CX-Thermo Ver.4.65
[New functions]
 Supported E5EC-[]B[]/E5CC-[]B[] (Push-in Plus Terminal Block Type).
[Improved functions]
 Solved the problem that segment time might not be transferred from the device to
the computer in E5AC-T/E5EC-T/E5CC-T.
Solved the problem that Fine Tuning screen could not start up in E5AC-T/E5ECT/E5CC-T.
Network Configurator Ver.3.59c
[New functions]
 Supported the Displacement Sensor of ZW-7000 series.
CX-Motion-NCF Ver.1.94
[Improved functions]
 Improved the connectivity with some units.
CX-Motion Ver.2.39
[Improved functions]
 Improved the link-off problem in the help file.
Switch Box Utility Ver.1.67
[Improved functions]
 Changed the help file format from HLP to CHM.
3
Before the change
The functions on the
right were not
provided.
After the change
Sysmac Studio/CX-One Common Components
[New functions]
 Added the following CPS files.
CPS_NJ101-1000_Ver1_11.xml
CPS_NJ101-1020_Ver1_11.xml
CPS_NJ101-9000_Ver1_11.xml
CPS_NJ101-9020_Ver1_11.xml
CPS_NJ301-1100_Ver1_11.xml
CPS_NJ301-1200_Ver1_11.xml
CPS_NJ501-1300_Ver1_11.xml
CPS_NJ501-1320_Ver1_11.xml
CPS_NJ501-1340_Ver1_11.xml
CPS_NJ501-1400_Ver1_11.xml
CPS_NJ501-1420_Ver1_11.xml
CPS_NJ501-1500_Ver1_11.xml
CPS_NJ501-1520_Ver1_11.xml
CPS_NJ501-4300_Ver1_11.xml
CPS_NJ501-4310_Ver1_11.xml
CPS_NJ501-4320_Ver1_11.xml
CPS_NJ501-4400_Ver1_11.xml
CPS_NJ501-4500_Ver1_11.xml
[Improved functions]
 Changed the help file format from HLP to CHM.
Communications Middleware Ver.1.31
[Improved functions]
 Improved the connectivity via USB.
Specifications and prices in this product news are as of the issue date and are subject to change without notice.
Only main changes in specifications are described in this document. Please be sure to read the relevant catalogs, datasheets, product
specifications, instructions, and manuals for precautions and necessary information when using products.
4
Download PDF