10Mbps@3Km G.SHDSL.bis Industrial Ethernet Extender

Comet 1602R
Comet 1604R
10Mbps@3Km G.SHDSL.bis
Industrial Ethernet Extender

Symmetric H.264 or MPEG4 HD quality video streaming over 3Km

Point to point Ethernet extension over multiple copper lines

1 or 2 pairs G.SHDSL.bis with 15Mbps per pairs

Supports extension rate up to 30Mbps over 2 pairs of copper

Easy installation with DIP switch, Telnet, WEB GUI and SNMP

Automatic line rate selection with Line Probe enabled

Front panel status LED indicators for easy monitoring

Front panel test button with BERT for easy loop diagnostic

Easy software upgrade for field-deployed units via TFTP

DSL line protection for data transmission

Ethernet switching and bridging with VLAN prioritization and QoS

Supports security-link

CO and CPE mode selectable

Optional Ethernet port surge protection

Compliant with IEEE 802.3ah EFM 2Base-TL bonding technology

Compliant with ITU-T G.991.2 standard, TC-PAM 16/32/64/128 line
coding
TAINET’s Comet 160xR EFM series is the so called Ethernet Access Devices (EAD), Ethernet Media
Data Converter (MDC) or Ethernet DSL modem at industrial grade, which takes advantage of the latest
G.SHDSL.bis standard. This mini-terminal enables the transport of traffic from Ethernet interface with
speed of 15M/30Mbps over EFM bonded 2/4 wires G.SHDSL.bis link.
TAINET's Comet 160xR industrial G.SHDSL.bis modem is in compliance with EN50121-4 ETS EMC.
This proves that not only can TAINET products operate and sustain on railways, but they can also work
well under harsh conditions.
Comet 160xR EFM series supports high-speed dedicated symmetrical data transmission and utilizes
DSL bandwidth. The automatic adjusting line rate can be up to 15Mbps over 2-wire copper line
symmetrically. Comet 1602R/1604R series typically works as an Ethernet extender, with up to 4 wires
that could enhance the line rate and provide aggregated bandwidth up to 30Mbps. Furthermore, Comet
1602R/ 1604R is fully compatible with TAINET iEAC-16, the intelligent Ethernet access chassis. This
combination is designed to work as a central office especially for long distance Ethernet Access Service.
It covers the ADSL/VDSL’s disadvantages of distance limitation by offering multi-pair bonding services.
Comet 160xR EFM series is an ideal solution for Railways, Telecom Carriers, Service Providers and
business users. In order to reduce operation/management burden, Comet 160xR EFM series controls
can control and monitors its remote units via the Embedded Operation Channel (EOC), based on ITU-T
recommendation G.991.2. Administrators of Comet 160xR EFM series are entitled to configure the
moderms through Telnet, Web/HTTP or SNMP agent with ease.
TAINET COMMUNICATION SYSTEM CORP.
www.tainet.net
Headquarters
3F., No.108, Ruiguang Rd.,
Neihu Dist., Taipei City 114, Taiwan
TEL: 886-2-26583000
FAX: 886-2-27938000
E-mail: sales@tainet.net
Railroad
ETH
ETH
G.SHDSLbis
G.SHDSL.bis
ETH
ETH
2/4 wires
iEAC-16
Surveillances
G.SHDSLbis
CCD
ETH
2/4 wires
ETH
Control
Center
Railroad
HMI System
(Human-Machine Interface)
ETH
Ticketing System
Train Station
Model
-
Comet 1602R, 2-wire, 4 Ethernet ports
-
Comet 1604R, 4-wire, 4 Ethernet ports
Line Interface - G.SHDSL.bis
Management
-
Configuration via DIP switch, Telnet, WEB GUI and
SNMP
-
Multiple Web browsers supported: IE, Firefox, Chrome
-
Supports remote management
-
Type: 2 or 4-wire
-
Local and Remote loopback for diagnostic
-
Standard: ITU-T G.991.2, ETSI 101 524
-
Supports Performance Monitoring function
-
Bonding protocol: IEEE 802.3ah EFM 2Base-TL
-
Front panel test button for easy loop healthy testing
-
Line rate: n x 64Kbps, n=3~239 (2w), 6~478 (4w)
-
Front panel reset to default button
-
Rate1: Symmetric 10Mbps over 3Km@24AWG (0.5mm)
-
Rate2: Symmetric 384Kbps over 9Km@24AWG (0.5mm)
-
Connector: 1xRJ-45
-
Line coding: TC-PAM 16/32/64/128
-
Impedance: 135 
DTE Interface - Ethernet
LED Indicators
-
PWR, TST, ALM, CPE, DSL1~2, LAN1~4
-
Dual color LED for easy status monitoring
Power Requirement
-
9~36VDC or 18~60VDC
-
Power consumption: 6W
-
Ethernet type: 10/100 BaseT
-
Connector: RJ-45
-
Supports 802.3x flow control
-
ISO 9001 Quality Management
-
Auto-MDI/MDIX detection
-
China CCC Quality Certification
-
Auto-negotiation for speed and duplex
-
CE Approval, EN 55022, 55024, 61000-3
-
Full duplex / Half duplex support
-
CE LVD Safety, IEC-60950-1, EN 60950-1
-
FCC Part 15, CISPR 22, ANSI C63.4
-
Railway EMC 50121-4
-
ITU-T K.21 Compliant
Ethernet L2 function
-
Supports 802.1d transparent bridge function
-
Supports Bridge filter function based on source MAC
addresses
Certification
Dimension
-
Scalable per port bandwidth control (Step = 64K, up to
100M)
-
2K MAC learning address
-
Ethernet packet length up to 1664 bytes
-
Operation Temperature: 0 °C ~ 75 °C
-
Supports 802.3x flow control
-
Storage Temperature: -40 °C ~ 85 °C
-
Provides 802.1q VLAN tagging
-
-
Humidity: 90%, non-condensing
Supports 802.1p QoS facility
-
210(W) x 146(D) x 37(H) mm
Operating Environment
2015.04
Download PDF