LP Servo Pan/Tilt Head – PT-LP-S5

LP
LPServo
ServoPan/Tilt
Pan/TiltHead
Head––PT-LP-S5
PT-LP-S5
Key Features:
» Full integral servo with support for keytime changes.
» High load capacity up to 90lb.
» Fast and quiet, up to 90deg/sec
» LED status indicators for power &
health.
» Local buttons to drive any axis and set
soft-limits.
» Innovative dual-cradle design for easy
integration
» Embedded red & green tally
» Virtual set ready
» Web app for: simple control,
configuration, and health monitoring.
» Redundancy for camera controls &
robotics control capable.
» Clean cable management
» Embedded network switch with 3x
network ports.
The new PT-LP-S5 robotic pan tilt head is the latest evolution of the widely successful PT-LP-S4 series and represents the 5th generation of robotic
camera systems from the award winning Engineering team at Telemetrics, which has more than 100 years combined experience in the broadcast
industry. The new S5 line includes Telemetrics advanced servo technology enabling higher payloads and smooth, quiet on-air operation delivering
breath-taking results.
Our new “snap-in” modular design enables quick, easy, and accurate setup and commissioning. The S5 line can automatically detect and warn
when load balancing and power issues are detected — preventing costly down time. The revolutionary new construction and streamlined design
enables greater max payloads and a tremendously stable and reliable platform.
The S5 head is perfectly suited for studio applications where mid to heavy weight payloads of up to 85 pounds are required. The PT-LP-S5 supports
mounting prompters, preview monitors, camera, lens, tally, and count down clocks all powered by our integrated cable and power management
feature. The system supports both robotic and manual control over-rides where certain studio applications demand the versatility.
The S5 series continues the long-standing support of high-resolution encoders for use in virtual reality applications where robotic cameras are
desired.
Revised: 4-27-17
LPLPServo
Head
ServoPan/Tilt
Pan/Tilt
Head– –PT-LP-S5
PT-LP-S5
Options
Pan Travel (Max)
+-360° w/endstop (720° without end-stops)
Tilt Travel (Max)
+180° -180° ** (+25°, -15° with teleprompter)**
End Stop Resolution
Velocity (Min/Max)
Pan 0.01º - 90º/sec; ilt 0.01º - 90º/sec*
Stopping Accuracy
60arc sec (0.016º)
5,625 il counts per 360º (23-bit)
Virtual Option
Feedback Accuracy
360 Deg = 800,000 Counts,
0.00045 Deg/Count
Payload
Weight
Power In
Input Power Connector
90º/sec.2 *
Velocity, osition ut & ade w/convergence,
otion ey rame, anual w/ ption
90lbs. (40.8kg) load on center of mass
38 lbs. (17 kg)
38-53 VDC (10A
7-pin
120W (13.2 VDC, 9A max)
Tally ight with djustment
CA-PTP-TM-S5-048
CABLE LP-S5 TM TALLY/MON PWR
CA-PTP-CSM-S5-048
CABLE LP-S5 CSM TALLY/MON PWR
CA-PTP-AS-S5-048
CABLE S5 AUTOSC TALLY/MON PWR
CA-PTP-PRO-LP-048
CABLE LP-S4 PROLINE TELEPROMPT
MA-EP7
Auxiliary Axis
Dolly
Adapter Plate EP7 to PT-LP-S5
TG4 trolly, TG4M trolly, EP7 Televator
EP6-FFD
ake and
odel
Operating: 4 to 50ºC (40 to120ºF)
Storage: -30 to + 60ºC (-22 to 140)
Red & reen ntegrated & utput IO upport
Virtual Data Output
Ethernet UDP
Compatible Lenses
Analog eleconference & igi ull ervo lenses
Most roadcast anufacture cameras and
odels. (Contact Telemetrics for ull list of
supported models)
Embedded Red
Red & G
Green Tally
T
Revised: 4-27-17
LP irtual tudio ption
ale XLR
Teleprompter & Talent
Monitor Power Output
Camera Direct Control
of CCU function
odules with PAN BARS
Accessories
* *Dependent on quipment
60W (15 VDC, 4A max)
Tally
anual an/ ilt rag
ax)
Camera Power Output
Temperature Range
PTO-LP-S5-VS
TL-A-12V
Audible Noise
Operating Modes
LP
Electronic mooth top
Position Resolution
Acceleration
PTO-LP-S5-MAN2
Robotic Head
TTeleprompter
Telep
rompter
Talent Monitor
Column
LPLPServo
ServoPan/Tilt
Pan/TiltHead
Head––PT-LP-S5
PT-LP-S5
Pan/Tilt, Camera, & Monitor Power Indicators
Lens Extender
Lens Digital Control
Lens Analog Control
Camera Power & CCU Data
Camera Trunk Data or Aux Data
Camera Network for CCU Data
Red & Green Tally Output
Teleprompter & Talent Monitor Power out
Passthrough
2x Single Mode Fiber
4x BNC 3G (GL, SDI, Mon A & B)
XYZ Virtual Data Input
2x Network RJ45 Connection
Power In, Ready, Auxiliary Com., Out of Balance LEDs
Serial Control RS232/422
Auxiliary Axis Control
48Vdc Power Input
Revised: 4-27-17
Download PDF