WyreStorm Low Profile 4K HDBaseT 5-Play Extender Set with

WYRESTORM PRODUCT SPECIFICATION SHEET
WyreStorm Low Profile 4K HDBaseT 5-Play
Extender Set with 2-Way IR, RS232, POH & Ethernet
(4K: 70m/230ft - 1080p: 100m/328ft)
EX-70-4K
Key Features:
•
•
•
Extender set capable of HDMI transmission using single cable Cat5e/6 cable under recommended conditions*:
- 70m/230ft: 4K video up to 4096 x 2160@30Hz / 24bit True Color with full chroma subsampling color palette 4K@30Hz 4:4:4
or 4K@60Hz 4:2:0**
- 100m/328ft: 1920x1080p HD video@60Hz / 48bit Deep Color
Bidirectional PoH (Power over HDBaseT) allows transmitter to power receiver or receiver to power the transmitter – mains
power supply only required to one device
Robust Class A HDBaseT technology for stable transmission resistant to electrostatic and environmental interference
compared to conventional UTP distribution
Ultra slim, ultra High Definition 4K compatible HDBaseT extender set with 5-Play feature support for HD video, HD
audio, Ethernet, power, two-way control via IR & routed RS232 over a single Cat5e/6. Including increased HDMI
output, Network connectivity and stereo breakout for expanded integration options for the ultimate in digital content
extension and control.
Additional Features & Benefits:
•
•
•
•
•
Supports all high definition resolutions: 4K (UHD & DCI),
1080p, 1080i, 720p with screen refresh rate support of 24Hz,
30Hz (4K) 50Hz, 60Hz (1080p), 4K@60Hz YUV4:2:0
Full 3D compatibility up to 1080p - frame packing/ sequential
(Blu-Ray) and interlaced stereoscopic (satellite/ cable
broadcasts)
5Play compliance - distribution of video (4K UHD & 1080p
HD), multichannel HD audio, two-way IR, and 10/100
Ethernet over single Cat5e/6
Multichannel audio supports 7.1 DTS Master HD and Dolby
True HD
Transmits discrete wide-band bidirectional IR control and
serial commands together within the HDMI signal over a
single Cat5e/6
•
•
•
•
•
•
•
Adjustable EDID management for preset, stored or recalled
settings to negotiate communication between connected
source/display devices
Switchable RS232 port for control or firmware update
Phoenix port for additional power connection
Visual 5-stage LED indication for power supply to units,
signal status to show established display connection, HDCP
presence in signal and strength of transmission
HDMI V1.4
Low profile chassis of 18mm / 0.7” for easier, more
convenient installations behind screens at display zones
Automatically adjusts feedback, equalization and
amplification of signal for easy installation
in the box
1 x TX-70-4K Transmitter
1 x RX-70-4K Receiver
2 x 12V/1.5A DC power supply
2 x 3.5mm Phoenix male connector (2 pin)
2 x 3.5mm Phoenix male connector (3 pin)
2 x Wide-band IR TX emitter
2 x Wide-band IR RX receiver (30-50KHz)
2 x Pairs of EX-70-4K mounting brackets
1 x Printed Quickstart guide*
*Quickstart and full manual downloadable from product page at wyrestorm.com
US OFFICE:
EMEA OFFICE: TEL: +1 518-289-1293
TEL: + 44 (0) 1793 230 343
WYRESTORM PRODUCT SPECIFICATION SHEET
Specifications
Dimensions (WxHxD)
232mm x 18mm x 93mm / 13” x 0.71” x 3.67” (depth excludes connectors)
WeightTransmitter: 0.52kg/1.15lbs
Receiver: 0.50kg/1.1lbs
InputTransmitter: 1 x HDMI
Input Signal Type
Input Resolution Support
Receiver: 1 x HDBaseT
Transmitter: HDMI 1.4a with 4K
Receiver: HDBaseT
480i, 576i, 480p, 576p, 720p, 1080i, 1080p @ up to 60Hz, 3840 x 2160 @ 30Hz,
4096 x 2160 @ 30Hz, 4K @ 60Hz YUV 4:2:0
Input Video Level
0.5~1.2V Vp-p
Input DDC Signal
5 volts p-p (TTL)
OutputTransmitter: 1 x HDBaseT OUT
Output Signal Type Transmitter: HDBaseT
Receiver: 1 x HDMI OUT
Receiver: HDMI 1.4a with 4K
Output Resolution Support
480i, 576i, 480p, 576p, 720p, 1080i, 1080p@ up to 60Hz, 3840 x 2160 @ 30Hz,
4096 x 2160 @ 30Hz, 4K @ 60Hz YUV4:2:0
Video Impedance
100Ω
Maximum Pixel Clock
297MHz
Audio
Multichannel digital audio supporting 7.1 DTS Master HD and Dolby True HD
3D
Frame packing/sequential (Blu-ray), Interlaced stereoscopic (satellite/cable broadcasts)
Operating Temperature
32°F to 95°F (0°C to 35°C) 10% to 90%, non-condensing
Storage Temperature
-4°F to 140°F (-20°C to 70°C) 10% to 90%, non-condensing
Power Supply
12v 2A DC
Power Consumption
≤16W (Pair)
ESD Protection
±8 kV (Air-gap discharge) ±4 kV (Contact discharge)
Surge ProtectionVoltage: ±1 kV (Ten times respectively positive / negative voltage)
Data communication cord: 2 kV Power cord : 2 kV
DISPLAY OUTPUT
SOURCE DEVICE
NOTE: Source device MUST be 4K to
transmit and receive 4K at a 4K display.
Wifi Router
Mains
power*
ethernet
cable
hdmi
SErial
Control
/ Firmware
update
NOTE: Although WyreStorm products
are tested with Cat5e, we recommend
Cat6 due to increased bandwidth and
improved capacity for handling large
transmissions along a single cable.
ir tx
cable
Cab-ir-link
ir tx cable
hdmi
COntrol
System
ir rx
cable
Electrical Fast Transient/Burst
Mains
power*
Cat5e/6 4K: 70m / 1080p: 100m
SErial Control
/ Firmware update
2-WAY
* Local power only required to one unit - PoH function powers unit at other location
For additional product information visit wyrestorm.com
For technical support contact: North America: +1 844-280-WYRE (9973)
EMEA/ROW: +44 (0) 1793 230 343
160302
Download PDF