3 Channel DMX Decoder - Interactive Technologies, Inc.

IT-LED3
3 Channel DMX Decoder
Specifications
Feature
Description
Control Type
Stand alone, DMX
Output
3 Channels - DMX, LED power conductor
Input
3-pin XLR or DMX over Ethernet
Input Voltage
6VDC - 24VDC
Power
12V < 180W, 24V <360W, 5A per channel
Dimensions
125mm x 54mm x 41mm
Output
0 - 24VDC
DMX Settings
Option Switches
Description
1-9
DMX address settings.
To set a desired address, put switches that add up to the address of
the first DMX channel to the ON position.
Examples:
DMX address 1 (for DMX channels 1-3)): switch 1, marked 001
DMX address 22 (for DMX channels 22-24): switches 2, 3, 5, marked
002, 004, 016.
Selecting address 0 (no address switches selected) puts the driver
in self-test mode. All three channels will be set to 100%, regardless of
DMX Input values.
10
DMX termination switch.
Setting this switch to the ON position internally connects
120 Ohm end-of-line termination resistor to the DMX Input jack.
Interactive Technologies, Inc.
5295 Lake Pointe Center Drive, Suite 100
Cumming, GA 30041 USA
678-455-9019 (Phone)
678-455-9071 (Fax)
Catalog #:
Project:
Prepared by:
Date:
Download PDF