MODEX product brief - Lightware Visual Engineering

The Most Variable
Modular Extender Family
Table of Contents
Modular Extender Family
■■ Introduction................................................................................. 3
■■ Event Manager............................................................................. 4
Configuration
■■ MODEX frames............................................................................ 7
■■ MODEX modules......................................................................... 8
Configuration / Media Connectors
■■ OPTS & OPTM Media connectors............................................... 9
Configuration / Video & Audio modules
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
Specification.............................................................................. 11
MODEX-AV-2HDMI-4K-IM-LH................................................. 12
MODEX-AV-5HDMI-4K-IM-LH................................................. 12
MODEX-AV-HDMI-DVI-4K-IM.................................................. 13
MODEX-AV-HDMI-DVI-IM........................................................ 13
MODEX-AV-DVI-IM................................................................... 14
MODEX-AV-DVIDL-IM.............................................................. 14
MODEX-AV-3GSDI-IM.............................................................. 15
MODEX-AV-DP-IM.................................................................... 16
MODEX-AV-HDMI-4K-OM........................................................ 16
MODEX-AV-HDMI-DVI-4K-OM................................................. 17
MODEX-AV-DVI-4K-OM........................................................... 17
MODEX-AV-HDMI-OM.............................................................. 18
MODEX-AV-DVI-OM................................................................. 18
MODEX-AV-DVIDL-OM............................................................. 19
MODEX-AV-DP-OM.................................................................. 19
Configuration / Interface Modules
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
MODEX-IF-ETH......................................................................... 20
MODEX-IF-2ETH-RS232........................................................... 21
MODEX-IF-4ETH....................................................................... 21
MODEX-IF-ETH-ECN................................................................ 22
MODEX-IF-AUDIN..................................................................... 22
MODEX-IF-AUDOUT................................................................. 23
MODEX-IF-AUD........................................................................ 23
MODEX-IF-RS232-IR................................................................ 24
MODEX-IF-RS232..................................................................... 24
MODEX-IF-2xRS232................................................................. 25
MODEX-IF-RS232-RS422......................................................... 25
MODEX-IF-2ETH-RS422........................................................... 26
MODEX-IF-2ETH-IR.................................................................. 26
■■
■■
■■
■■
■■
Summary................................................................................... 27
How to order a MODEX?..................................................... 29
25G HYBRID Integrated system................................................. 30
USB KVM standalone application diagram................................ 31
Accessories............................................................................... 31
www.lightware.eu
2
Modular Extender Family
Application-Specific Modular Extenders
Digital & analog video
Digital video
Digital & analog audio
Digital & analog audio
Ethernet
Ethernet
USB KVM
USB KVM
IR & CEC
IR & CEC
RS-232 & RS-422
RS-232 & RS-422
MODEX units are the world’s fastest and probably the most reliable modular
extenders supporting the AV and Broadcast industry formats. MODEX
offers a full range of modular transmitters and receivers extending digital
and analog video and audio, USB KVM, Ethernet and control signals over
a single fiber or CATx.
Customizing a MODEX is a really easy and simple four step process.
The technology built into the MODEX family breaks with many standard
limitations, allowing 30 meters DVI cable on input, Advanced EDID
Management, Pixel Accurate Reclocking, LAN, RS-232, RS-422 and USB
control, remote powering and more.
The half unit extender allows one Video Module and two Interface Modules
(which can be different or identical).
Step1: Choose a MODEX frame
Step2: Choose a fiber Media Connector
Step3: Select one Video Module
Step4: Select two Interface Modules
Finish: Your MODEX is ready to use
The MODEX units are fixed configurations and are custom manufactured
by Lightware.
MODEX Graphical User Interface
MODEX Modular Extenders have their own built- in websites for control.
When a MODEX is connected to a controlling computer the user meets
the MODEX Graphical User Interface. This GUI allows the user to control
all the functions of both MODEX transmitters and receivers in an easy and
user friendly way. The GUI is smart and intuitive and is also optimized for
tablets. The EDID Manager, Frame Detector and advanced audio settings
are also available from the GUI, with setup presets that can be saved and
applied quickly any time.
To find out more about the MODEX GUI please read the Quick Start
Guide, which has detailed description of the software. The Quick Start
Guide is available at: modex.lightware.eu
www.lightware.eu
3
Modular Extender Family
Event Manager
The Event Manager is a smart, built-in feature in the Lightware HDBaseT
compatible TPS extender family, the MODEX line and in some select matrix
switchers like the MMX6x2-HT series units. The feature is available
through the freely downloadable Lightware Device Controller software.
The Event Manager was developed to handle tasks from the most simple to
expert ones, like controlling the rolling shutter, the air conditioning system
or the lights based on any condition changes on the media ports, such as a
new source being connected or removed.
Event Manager application is continuously updated with additional features
via firmware upgrades: a delay can be added between the condition and the
action and more actions can be triggered by a single condition change. With
the help of the ‘condition count’ and ‘action test’ features, the predefined
settings can be tested before going live. The system can recognize infrared
commands which can also be set as conditions, and commands can also
be sent via Ethernet.
The Events menu contains separately configurable Events
Event Manager Wizard
Assigning an action to a condition is quick and easy with the Wizard function
of Event Manager.
The most typical examples of the currently selectable conditions and actions
within the Event Manager Wizard are the following:
Conditions
Video
Signal is detected on a port
Video
Signal is not detected on a port
Audio
Signal is detected on a port
Audio
Signal is not detected on a port
Audio
Signal type changes to PCM
Audio
Signal type changes to Compressed
Audio
Signal type changes to HBR
Audio
Signal type changes to Undefined (no signal)
IR
Infra code recognized
General
OPT / TPS link state changes to Connected
General
OPT / TPS link state changes to Disconnected
The Event Wizard makes the setup easy with simple dropdown options
There are many default Expressions available to choose from
Actions
Video
Switch input to output
Video
Enable autoselect output
Video
Disable autoselect on output
Ethernet
Send TCP command
Ethernet
Send UDP command
R232
Send RS232 message
EDID
Switch EDID
Audio
Set audio volume
Audio
Mute output
Audio
Unmute output
Audio
Increase/decrease volume
Green lines show which Event is configured and active, the rest stays grey
www.lightware.eu
4
Modular Extender Family
Event Example A
audio
HDMI
VGA
Laptop
Laptop
TPS connection
CATx up to 170m
O2
DI
AU
E
LIV-232
RSVC
SR K
LIN
IR
HDMI
IN
I-I
DV
IN
T
IN
IR
OU
IO
GP
A
RS-232
PIN:
mm
-232
RS
2.1
V 1A
TX
RX
Lamp
DC
12
UMX-TPS-TX140
B
C
Relay box
Projector
Button
panel
INPUT
Action
INPUT
Condition
Press button
panel
A
Input select on the TPS transmitter
B
Switch on the projector using RS-232
C
Switch off the lamp using the transmitter’s GPIO port
With a button panel connected through the GPIO port, the UMX-TPS-TX140 can be controlled from a remote location; input switching is available even
if the transmitter is mounted under desk. In the example above there are three actions followed by a condition. When an input selector button is
pressed on the remote button panel, the selected input port is switched to the output, the projector turns on.
Event Example B
audio
HDMI
VGA
Laptop
Laptop
TPS connection
CATx up to 170m
O2
DI
AU
E
LIV-232
RSVC
SR K
LIN
IR
HDMI
IO
GP
PIN:
Ethernet
mm
-232
I-I
DV
TX
IR
OU
UMX-TPS-TX140
A
RX
DC
12
B
IN
T
IN
RS
2.1
V 1A
IN
Projection
screen
C
Projector
Relay box
INPUT
Action
INPUT
Condition
A
Input select on the TPS transmitter
B
Switch on the projector using RS-232
C
Roll down the projection screen using the transmitter’s GPIO port
The projector and the rolling screen (via relay box) are connected to the UMX-TPS-TX140. When the user connects a laptop to the HDMI
port of the transmitter, then the connected input is selected automatically, the screen goes down and the projector turns on to display the source.
www.lightware.eu
5
Modular Extender Family
Event Example C
TPS connection
CATx up to 170m
A
HDMI
130
-US
Remote control
-TX
PS
X-T
-UM
WP
UT
TUS
STA
INP
ET
ERN
ETH
W
SHO
ME
IO
AUDECT
SEL
EO
VID
ECT
SEL
VGA
DP I ct
HDMsele
Auto
IO
AUD
DP I
HDMLink
ET
TPS
RES
IR
IO
AUD
3
EO
VID
2
DP
IN
O
WP-UMX-TPSTX130-US
HDMI-TPS-RX95
Ethernet
Projector
VGA
B
DP
MacBook
audio
Laptop
Press remote
control
INPUT
Action
INPUT
Condition
A
Input select on the TPS transmitter
B
Switch on the projector using RS-232
A MacBook with DisplayPort and another laptop with VGA and analog audio are connected to the WP-UMX-TPS-TX130-US wallplate which means there
are two audio signals and two video signals connected. These inputs can be switched via IR using a remote control. For example the analog audio of the
Laptop can be mixed with the DisplayPort video of the MacBook. The Event Manager helps the user assign actions like switching the projector on when
the desired input is selected.
www.lightware.eu
6
MODEX Frames
MODEX Frames
The MODEX frame unit received a thorough hardware and firmware
upgrade in Q4 2015. The upgrade improves the cooling system, it
has monitoring functions checking voltage and temperature and also
separately checking the optical unit temperatures. Remote firmware
upgrade via optical link is now also available. The front panel has an
additional 10/100 Mbps Ethernet port (with full functionality, but can
be used as control interface) and USB KVM connectors (transmitter has
one USB-B for the computer; receiver has two USB-A connectors for the
keyboard and mouse). Keyboard and mouse functions are emulated by
the extender and no USB enumeration occurs during and after operator
switching. The connected computer is not aware of a keyboard or mouse
being changed.
MODEX-TX Specifications
Ethernet
RJ-45 connector
General (for Half RU Extender):
USB KVM
USB-B female connector
Dimensions:
221 W x 240 D x 42,5 H mm
Front panel buttons:
Yes
Weight:
1950 g (excluding all modules)
Front panel LCD:
Yes, 2 x 16 characters
Power consumption:
WEB:
Built-in website (TCP/IP Ethernet)
12 W (typ.) 19 W (max.) without modules
15 W (typ.) 25 W (max.) with modules
EDID Management:
119 factory and 31 user programmable EDID
ESD protection:
IEC61000−4−2 Level 4
EDID emulation:
256-Byte Extended EDID v1.3
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +70 °C
Humidity:
10% to 90% non-condensing
Compliance:
CE
Warranty:
3 years
MODEX-RX Specifications
Ethernet
RJ-45 connector
General (for Half RU Extender):
USB KVM
2 x USB-A female connector
Dimensions:
221 W x 240 D x 42,5 H mm
Front panel buttons:
Yes
Weight:
1950 g (excluding all modules)
Front panel LCD:
Yes, 2 x 16 characters
Power consumption:
WEB:
Built-in website (TCP/IP Ethernet)
12 W (typ.) 19 W (max.) without modules
15 W (typ.) 25 W (max.) with modules
EDID Management:
119 factory and 31 user programmable EDID
ESD protection:
IEC61000−4−2 Level 4
EDID emulation:
256-Byte Extended EDID v1.3
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +75 °C
Humidity:
10% to 90% non-condensing
Compliance:
CE
Warranty:
3 years
www.lightware.eu
7
MODEX Modules
MODEX Modules
The half-unit extender has a media connector module, one video module
and two identical or different interface modules. Modules are selected
according to the signal types an actual application requires. Signals are
transferred by the MODEX extender pair or end point transmitter or receiver.
Video Module
MODEX supports most video formats: DisplayPort 1.1, HDMI 1.4 with
3D, Dual‑Link DVI, SDI, and 3G‑SDI. The video format conversion is
automatic if the two ends have different modules.
The video & audio modules are also capable of transmitting audio.
External S/PDIF, RCA or the Embedded Audio present in different video
signals are accepted as source. Embedding and extracting audio or
transmitting in both directions simultaneously are also supported.
Interface Modules
MODEX architecture allows the transmission of a wide variety of auxiliary
signal types through the interface modules. All auxiliary signal types can
be simultaneously transmitted at full bandwidth reducing the need for
additional extenders and cabling.
Both modex frames have up to two module slots for interface modules,
which can be any control signal, audio or Ethernet.
Media Connector
The MODEX range includes a family of long distance transmitters and
receivers for sending and receiving video, audio, RS‑232 and IR control,
USB KVM and Ethernet over a single fiber cable. The Media Connector,
the heart of the MODEX determines the signal transportation type and the
direction of transport.
www.lightware.eu
8
Media Connectors
Built-in power supply
with IEC connector
Media Connectors
Neutrik
OpticalCON
PowerCON
AC inlet
Neutrik
OpticalCON
MODEX unit configurations can include various long distance transmitters
and receivers for sending and receiving video, audio, RS-232 and IR
control, USB KVM and Ethernet over a single fiber or CATx cable. The
media connector is the heart of a MODEX unit as it determines the type of
signal transportation.
MODEX-CON-OPTS/M-NT
MODEX-CON-OPTS/M-NT-PCN
OPTS & OPTM Media connectors
Part No: see the Connectors table
SC optical
connector
The OPTS and OPTM Media Connectors provide transmission over a one
Single Mode (OPTS) or Multi Mode (OPTM) fiber. Most fiber connector
types are available to choose the best option for your application such as
Neutrik OpticalCON, industrial grade LC ODVA, ST, SC, HF4, EBCM, EBCJ
or LEMO. For a cost-effective smart solution Lightware introduced the
LC breakout Media Connector which allows the user to connect another
MODEX extender with a patch cable at the end point to send signals to two
MODEX units over a single Neutric OpticalCON duo cable. There are also
two optional power connectors provided – to see the available combinations
please check the ‘Optional Fiber and Power Connectors’ chart.
MODEX-CON-OPTS/M-SC
Industrial sealed LC ODVA
compliant optical connector
Optical Fiber and Power Connectors
Mod. Fiber connector
No.
OPTS
(RX/TX)
OPTM
(RX/TX)
Power
connector
ST optical
connector
MODEX-CON-OPTS/M-ST
SMPTE
304M HDTV
Part
number
227
Neutrik OpticalCON DUO IEC C14 AC
9161 0227
231
Neutrik OpticalCON DUO PowerCON AC
9161 0231
229
LC ODVA
IEC C14 AC
9161 0229
235
ST
IEC C14 AC
9161 0235
237
SC
IEC C14 AC
9161 0237
233
HICON HI‑FIBER4
IEC C14 AC
9161 0233
223
Expanded Beam Mini
(HMA)
IEC C14 AC
9161 0223
207
Expanded Beam Junior
(HMA)
IEC C14 AC
9161 0207
239
(TX)
SMPTE 304M HDTV
socket
IEC C14 AC
9161 0239
240
(RX)
SMPTE 304M HDTV
plug
IEC C14 AC
9161 0240
241
Neutrik OpticalCON DUO
IEC C14 AC
and LC
9161 0241
228
Neutrik OpticalCON DUO IEC C14 AC
9161 0228
232
Neutrik OpticalCON DUO PowerCON AC
9161 0232
230
LC ODVA
IEC C14 AC
9161 0230
236
ST
IEC C14 AC
9161 0236
238
SC
IEC C14 AC
9161 0238
234
HICON HI‑FIBER4
IEC C14 AC
9161 0234
226
Expanded Beam Mini
(HMA)
IEC C14 AC
9161 0226
210
Expanded Beam Junior
(HMA)
IEC C14 AC
9161 0210
242
Neutrik OpticalCON DUO
IEC C14 AC
and LC
9161 0242
MODEX-CON-OPTS/M-ODVA
LC optical
connector
Neutrik
OpticalCON
MODEX-CON-OPTS/MNT-BRK-LC
MODEX-CON-OPTS-LEMO
Expanded Beam
Junior (HMA)
MODEX-CON-OPTS/M-EBCJ
HICON
HI-FIBER4
MODEX-CON-OPTS/M-HF4
OPTS: singlemode MODEX Media connector
OPTM: multimode MODEX Media connector
www.lightware.eu
9
Media Connectors
Module Specifications
Fiber Specifications
Link speed:
6,25 Gbps
Singlemode fiber wavelength:
1310, 1490, 1550 nm
Multimode fiber wavelength:
850, 1310, 1550 nm
335g
Singlemode extension distance:
10 km (32800 ft)
227/228
285g
Multimode extension distance:
300 m (1000 ft)
229/230
295g
Optical transmission channel 1:
OPTS/OPTM connection
231/232
290g
Module
Power Consumption:
Number
Weight:
207/210
380g
223/226
OPTS/
233/234
OPTM
235/236
0,75 W typ., 1.1 W max.
310g
Video Specifications:
270g
Supported video resolutions:
Up to 4K (30 Hz, 4:2:2, 297 MHz, 24 bit)
237/238
270g
Max pixel clock:
297 MHz
239
315g
Frame delay:
No delay
240
390g
Video signal latency:
Approx. 3 lines
241/242
300g
Audio Specifications:
Optical Budget Data
MODEX-OPTS-RX/TX
Embedded audio:*
8 channel PCM or HBR compressed
Forward audio:
2 channel PCM or 5.1 compressed
Return audio:
2 channel PCM or 5.1 compressed
*configurable, the embedded audio in the video stream can be switched to any other audio.
Wavelength
TX Power
RX Sensitivity
Link Budget
1310 nm
-5.5 dBm
-21.5 dBm
16 dBm
Ethernet Specifications:
1490 nm
-8.5 dBm
-21.5 dBm
13 dBm
Ethernet:
1550 nm
-8.5 dBm
-21.5 dBm
13 dBm
10/100 Mbit/s
USB Specifications:
USB standards:
Only HID devices, Smart Card
Link Budget
USB HUB:
Not supported
Device number:
2 USB HID devices
MODEX-OPTS-RX/TX
Wavelength
TX Power
RX Sensitivity
850 nm
-7.5 dBm
-18.5 dBm
11 dBm
1310 nm
-3.5 dBm
-18.5 dBm
15 dBm
1550 nm
-3.5 dBm
-19.5 dBm
16 dBm
www.lightware.eu
10
Video & Audio Input Modules
Video Modules
Various video formats are supported by the MODEX video modules:
DisplayPort 1.1, HDMI 1.4 with 3D, Dual-Link DVI, SDI, 3G-SDI,
analog VGA and Interlaced Composite Video. The video format
conversion is automatic if the two ends have different modules.
The Video & Audio modules are also capable of transmitting audio.
The source may be external S/PDIF, RCA, XLR or the Embedded Audio
present in different video signals. Embedding and extracting audio or
transmitting in both directions simultaneously are also supported.
Format
Audio Channels
Embedded Audio
(24/30bit 1080p60)
Embedded audio
(36bit 1080p60
or 24bit 4K@30)
Forward Audio
Return Audio
PCM 32 kHz
8


 2 ch.
 2 ch.
PCM 44.1 kHz
8


 2 ch.
 2 ch.
PCM 48 kHz
8


 2 ch.
 2 ch.
PCM 88.2 kHz
8


×
×
PCM 96 kHz
8


×
×
PCM 176.4 kHz
2

×
×
×
PCM 176.4 kHz
8

×
×
×
PCM 192 kHz
2

×
×
×
PCM 192 kHz
8

×
×
×
Dolby Digital (AC3)
5.1




Dolby Digital Plus
2.0

×
×
×
Dolby Digital Plus
5.1

×
×
×
Dolby TrueHD
2.0

×
×
×
Dolby TrueHD
7.1

×
×
×
DTS
5.1




DTS ES
6.1




DTS 96/24
6.1


×
×
DTS-HD-HRA
5.1

×
×
×
DTS-HD-HRA
7.1

×
×
×
DTS-HD Master Audio
5.1

×
×
×
DTS-HD Master Audio
7.1

×
×
×
www.lightware.eu
11
Video & Audio Input Modules
4K UHD HDMI Input Module with Monitor Out
4K UHD HDMI Input Module with Monitor Out
MODEX-AV-2HDMI-4K-IM-LH
MODEX-AV-5HDMI-4K-IM-LH
Part No: 9161 0443
Part No: 9161 0442
Features
Features
Specifications
Specifications
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
DVI 1.0, HDMI 1.4 compliant
Video connectors: 2xHDMI (input), HDMI (output)
Resolution up to 4K UHD on both inputs and the output
3D support
Deep color support up to 36bpp
Embedded 7.1 HBR audio support
HDCP 1.4 compliant
EDID emulation
Max cable length: 15m
Autoselect function
CEC
Audio Return Channel (ARC) support
Built-in test pattern generator
DVI 1.0, HDMI 1.4 compliant
Video connectors: 5xHDMI (input), HDMI (output)
Resolution up to 4K UHD on both inputs and the output
3D support
Deep color support up to 36bpp
Embedded 7.1 HBR audio support
HDCP 1.4 compliant
EDID emulation
Max cable length: 15m
Autoselect function
CEC
Audio Return Channel (ARC) support
Built-in test pattern generator
Max resolution:
1600x1200 @ 60Hz 36bit
3840x2160 @ 30Hz 24bit
1920x1080p @ 120Hz 24bit
Max resolution:
1600x1200 @ 60Hz 36bit
3840x2160 @ 30Hz 24bit
1920x1080p @ 120Hz 24bit
Max cable length:
15m / 22 AWG
Max cable length:
15m / 22 AWG
Color depth:
24, 30, 36 bit deep color
Color depth:
24, 30, 36 bit deep color
Color space:
RGB, YCbCr 4:4:4/4:2:2
Color space:
RGB, YCbCr 4:4:4/4:2:2
Frame delay:
No delay
Frame delay:
No delay
Data rate:
9 Gbps
Data rate:
9 Gbps
Max pixel clock:
300 MHz
Max pixel clock:
300 MHz
Supported video standards: DVI 1.0, HDMI 1.4
Supported video standards: DVI 1.0, HDMI 1.4
3D support:
Yes
3D support:
Yes
Embedded audio / Return
audio:
Yes / Yes (IN2 and OUT)
Embedded audio / Return
audio:
Yes / Yes (IN2 and OUT)
EDID emulation:
Yes, Advanced EDID management
EDID emulation:
Yes, Advanced EDID management
HDCP compliancy:
1.4
HDCP compliancy:
1.4
Audio capability:*
4 stereo PCM or HBR compressed
Audio capability:*
4 stereo PCM or HBR compressed
Weight:
105 g
Weight:
150 g
Power consumption:
5.5 W (typ.) / 10.7 W (max.)
Power consumption:
6.7 W (typ.), 12.8 W (max.)
Connectors:
3 x HDMI with lock screw
Connectors:
6 x HDMI
ESD protection:
IEC61000−4−2 Level 4
ESD protection:
4 stereo PCM or HBR compressed
Operation temperature:
0°C - +50 °C
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +70 °C
Storage temperature:
-20°C - +70 °C
Humidity:
10% to 90% non-condensing
Humidity:
10% to 90% non-condensing
*The transmitted audio depends on the Media connector. For final audio transmission
capabilities please see the chosen Media connectors audio specification.
*The transmitted audio depends on the Media connector. For final audio transmission
capabilities please see the chosen Media connectors audio specification.
www.lightware.eu
12
Video & Audio Input Modules
4K UHD HDMI and DVI Input Module
HDMI 1.3 and DVI Input Module
MODEX-AV-HDMI-DVI-4K-IM
MODEX-AV-HDMI-DVI-IM
Part No: 9161 0410
Part No: 9161 0407
Features
Features
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
HDMI 1.4, DVI and HDCP 1.4 compliant
Resolution up to 3840x2160@30Hz, 1600x1200@60Hz
Supports any 3D formats
30 m copper cable compensation
HDCP enable/disable
Advanced EDID Management
HDMI 1.3 and DVI signals, one signal per module
HDCP 1.3 compliant with enable/disable mode
36‑bit deep color support
30m copper cable compensation
Advance Edid Managemen
Specifications
Specifications
Max resolution:
1600x1200 @ 60Hz 36bit
3840x2160 @ 30Hz 24bit
1920x1080p @ 120Hz 24bit
Max resolution:
1920x1200 @ 36bit
1600x1200 @ 24bit
Max cable length:
30m / 22 AWG
Max (in/out) cable length:
30 m / 22 AWG
Color depth:
24, 30, 36 bit deep color
Color depth:
24, 30, 36 bit deep color
Color space:
RGB, YCbCr 4:4:4/4:2:2
Color space:
RGB, YCbCr 4:4:4/4:2:2
Frame delay:
No delay
Frame delay:
No delay
Data rate:
9 Gbps
Data rate:
Total max 6,75 Gbps
Max pixel clock:
300 MHz
Max pixel clock:
225 MHz
Supported video standards: DVI 1.0, HDMI 1.3a
Supported video standards: DVI 1.0, HDMI 1.4
3D support:
Yes
Embedded audio /
Return audio:
Yes / No
EDID emulation:
Yes, Advanced EDID Management
HDCP compliancy:
1.4
Audio capability:*
4 stereo PCM or HBR compressed
Weight:
105 g
Power consumption:
2.75 W (max.)
Connectors:
DVI-D, HDMI
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +70 °C
Humidity:
10% to 90% non-condensing
*The transmitted audio depends on the Media connector. For final audio transmission
capabilities please see the chosen Media connectors audio specification.
3D support:
No
Embedded audio /
Return audio:
Yes / No
EDID emulation:
Yes, Advanced EDID Management
HDCP compliancy:
1.3
Audio capability:*
4 stereo PCM or HBR compressed
Weight:
105 g
Power consumption:
1,3 W (typ.) 2,2 W (max.)
Connectors:
DVI-D, HDMI
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +70 °C
Humidity:
10% to 90% non-condensing
*The transmitted audio depends on the Media connector. For final audio transmission
capabilities please see the chosen Media connectors audio specification.
www.lightware.eu
13
Video & Audio Input Modules
DVI Input Module
Dual-Link DVI Input Module
MODEX-AV-DVI-IM
MODEX-AV-DVIDL-IM
Part No: 9161 0433
Part No: 9161 0401
Features
Features
■■
■■
■■
■■
■■
■■
■■
■■
■■
HDMI 1.3 and DVI signals
HDCP 1.3 compliant with enable/disable mode
36‑bit deep color support
30m copper cable compensation
Advance Edid Management
Pro series Dual‑Link DVI input module
Resolution up to 2560 x 1600, 1920x1200@120Hz
HDCP 1.1 compliant
Advanced EDID Management
Specifications
Specifications
Max resolution:
1920x1200 @ 36bit
1600x1200 @ 24bit
Max resolution:
2560x1600 @ 60Hz
1920x1200 @ 120Hz
Max (in/out) cable length:
30 m / 22 AWG
Max (in/out) cable length:
20 m / 22 AWG
Color depth:
24, 30, 36 bit deep color
Color depth:
8 bit per color
Color space:
RGB, YCbCr 4:4:4/4:2:2
Color space:
RGB
Frame delay:
No delay
Frame delay:
No delay
Data rate:
Total max 6,75 Gbps
Data rate:
Total max 9,9 Gbps
Max pixel clock:
225 MHz
Max pixel clock:
165 MHz
Supported video standards: DVI 1.0, HDMI 1.3a
Supported video formats:
DVI 1.0
3D support:
No
3D support:
Yes
Embedded audio /
Return audio:
Yes / No
Embedded audio /
Return audio:
No / No
EDID emulation:
Yes, Advanced EDID Management
EDID emulation:
Yes, Advanced EDID Management
HDCP compliancy:
1.3
HDCP compliancy:
1.1
Audio capability:*
4 stereo PCM or HBR compressed
Audio capability:
Not supported
Weight:
95 g
Weight:
100 g
Power consumption:
0,4 W (typ.) 0,7 W (max.)
Power consumption:
1,4 W (typ.) 2 W (max.)
Connectors:
DVI-D
Connectors:
DVI-D
ESD protection:
IEC61000−4−2 Level 4
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +70 °C
Storage temperature:
-20°C - +70 °C
Humidity:
10% to 90% non-condensing
Humidity:
10% to 90% non-condensing
*The transmitted audio depends on the Media connector. For final audio transmission
capabilities please see the chosen Media connectors audio specification.
www.lightware.eu
14
Video & Audio Input Modules
3G-SDI Input Module with Two SDI Loop Out
Supported Resolutions
MODEX-AV-3GSDI-IM
Signal
type
Part No: 9161 0426
HD-SDI
Resolution Refresh
Color
depth
50 / 59,94 / 60 YCbCr
422
10
1080i
50 / 59,94 / 60 YCbCr
422
10
1080sF
25 / 29,97 / 30 YCbCr
422
10
1080p
23,98 / 24 /
YCbCr
25 / 29,97 / 30
422
10
50
YCbCr / RGB
444
10
59,94
YCbCr / RGB
444
10
60
YCbCr / RGB
444
10
50
YCbCr
422 / 444
12
50
YCbCr / RGB
444
10
50
RGB
444
12
59,94
YCbCr
422 / 444
12
59,94
YCbCr / RGB
444
10
59,94
RGB
444
12
60
YCbCr
422 / 444
12
Features
Accepts SD‑SDI, HD‑SDI and 3G‑SDI video signals
SDI multichannel audio de‑embedding
Auto detects input formats
Input signals are automatically equalized and reclocked
Two loop outputs for further transmission of the input
Sampling
720p
720p
■■
■■
■■
■■
■■
ColorSpace
3G-SDI
(3G-A)
1080i
Specifications
60
YCbCr / RGB
444
10
1920 x 1080p @ 60Hz
3G-SDI Level A: 1920x1080p YCbCr 4:2:2
3G-SDI Level B: 1920x1080p YCbCr 4:2:2
60
RGB
444
12
25
YCbCr
422 / 444
12
Max input cable length:
130 m @ 3G-SDI
25
RGB
444
10
Color depth:
20 bit
29,97
YCbCr
422 / 444
12
Color space:
10 bit / Y, 10 bit / CbCr, 12 bit RGB
29,97
RGB
444
10
YCbCr
422 / 444
12
Max resolution:
1080sF
Frame delay:
No delay
30
Data rate:
Total max 2,97 Gbps
30
RGB
444
10
Supported video standards: SD-SDI, HD-SDI, 3G-SDI
23,98
YCbCr / RGB
444
10
3D support:
No
24
YCbCr / RGB
444
10
Embedded audio:
Yes
25
YCbCr
422 / 444
12
EDID emulation:
No
25
YCbCr / RGB
444
10
Audio capability:*
4 stereo PCM
25
RGB
444
12
Weight:
120 g
29,97
YCbCr
422 / 444
12
Power consumption:
0,7 W (typ.) 1,1 W (max.)
29,97
YCbCr / RGB
444
10
Connectors:
3 x BNC (1 x in, 2 x loop out)
29,97
RGB
444
12
ESD protection:
IEC61000−4−2 Level 4
30
YCbCr
422 / 444
12
Operation temperature:
0°C - +50 °C
30
YCbCr / RGB
444
10
Storage temperature:
-20°C - +70 °C
30
RGB
444
12
Humidity:
10% to 90% non-condensing
50 / 59,94 / 60 YCbCr
422
10
Part number:
9161 0426
1080i
50 / 59,94 / 60 YCbCr
444
10
1080sF
29,97 / 30
YCbCr
444
10
1080p
50 / 59,94 / 60 YCbCr
422
10
3G-SDI
(3G-A)
1080p
*The transmitted audio depends on the Media connector. For final audio transmission
capabilities please see the chosen Media connectors audio specification.
3G-SDI
(3G-B)
www.lightware.eu
15
Video & Audio Input Modules
DisplayPort 1.1 Input Module
4K UHD HDMI Output Module
MODEX-AV-DP-IM
MODEX-AV-HDMI-4K-OM
Part No: 9161 0419
Part No: 9161 0416
Features
Features
■
■
■
■
■
■
■
■
■
■
Accepts DisplayPort 1.1a signals with Embedded Audio
Up to 2560 x 1600 pixel resolution with 10.8 Gbps
bandwidth speed
Audio embedding, de‑embedding
HDCP 1.3 compliant
Specifications
HDMI 1.4, DVI and HDCP 1.4 compliant
Resolution up to 3840x2160@30Hz, 1600x1200@60Hz
Supports any 3D formats
30 m copper cable compensation
HDCP enable/disable
Advanced EDID Management
Specifications
Max resolution:
2560x1600 @ 60Hz
Max DP cable length:
15 m / 24 AWG
Color depth:
Max resolution:
1600x1200 @ 60Hz 36bit
3840x2160 @ 30Hz 24bit
1920x1080p @ 120Hz 24bit
Color depth:
24, 30, 36 bit deep color
Color space:
24, 30, 36 bit deep color
RGB/YUV (4:4:4) – 10-bit color
YUV (4:2:2/4:2:0) – 12-bit color
RGB (4:4:4) to YUV (4:4:4)
Color space:
RGB, YCbCr 4:4:4/4:2:2
Frame delay:
No delay
Frame delay:
No delay
Data rate:
9 Gbps
Data rate:
Total max: 10.8 Gbps (1.62/2.7 Gbps/lane)
Max pixel clock:
300 MHz
Supported video standards: DVI 1.0, HDMI 1.4
Supported video standards: DP 1.1a compliant
3D support:
Yes
Yes
Embedded audio /
Return audio:
Yes / No
EDID emulation:
Yes, Advanced EDID Management
EDID emulation:
Yes, Advanced EDID Management
HDCP compliancy:
1.3
HDCP compliancy:
1.4
Audio capability:*
4 stereo PCM or HBR compressed
Audio capability:*
4 stereo PCM or HBR compressed
Weight:
95 g
Weight:
95 g
Power consumption:
0,8 W (typ.) 2,5 W (max.)
Power consumption:
0.38 W (typ.), 2.88 W (max.)
Connectors:
Standard DisplayPort gold plated connector
Connectors:
HDMI
ESD protection:
IEC61000−4−2 Level 4
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +70 °C
Storage temperature:
-20°C - +70 °C
Humidity:
10% to 90% non-condensing
Humidity:
10% to 90% non-condensing
3D support:
Yes
Embedded audio
*The transmitted audio depends on the Media connector. For final audio transmission
capabilities please see the chosen Media connectors audio specification.
*The transmitted audio depends on the Media connector. For final audio transmission
capabilities please see the chosen Media connectors audio specification.
www.lightware.eu
16
Video & Audio Input Modules
4K UHD HDMI and DVI Dual Output Module
4K UHD DVI Output Module
MODEX-AV-HDMI-DVI-4K-OM
MODEX-AV-DVI-4K-OM
Part No: 9161 0439
Part No: 9161 0436
Features
Features
■■
■■
■■
■■
HDMI 1.4 and DVI signals
HDMI and DVI connectors output the same signal simultaneously
HDCP 1.4 compliant with enable/disable
Resolution up to 3840x2160@30Hz, 1920x1080p@120Hz,
1600x1200@60Hz
■■ Supports any 3D formats
■■ Advanced EDID Management
Specifications
■■ HDMI 1.4, DVI and HDCP 1.4 compliant
■■ Supports deep color and Embedded Audio
■■ Resolution up to 3840x2160@30Hz, 1920x1080p@120Hz,
1600x1200@60Hz
■■ Supports any 3D formats
Specifications
Max resolution:
1600x1200 @ 60Hz 36bit
3840x2160 @ 30Hz 24bit
1920x1080p @ 120Hz 24bit
Max resolution:
1600x1200 @ 60Hz 36bit
3840x2160 @ 30Hz 24bit
1920x1080p @ 120Hz 24bit
Color depth:
24, 30, 36 bit deep color
Color depth:
24, 30, 36 bit deep color
Color space:
RGB, YCbCr 4:4:4/4:2:2
Color space:
RGB, YCbCr 4:4:4/4:2:2
Frame delay:
No delay
Frame delay:
No delay
Data rate:
9 Gbps
Data rate:
9 Gbps
Max pixel clock:
300 MHz
Max pixel clock:
300 MHz
Supported video standards: DVI 1.0, HDMI 1.4
Supported video standards: DVI 1.0, HDMI 1.4
3D support:
Yes
3D support:
Yes
Embedded audio /
Return audio:
Yes / Yes (on HDMI connector)
Embedded audio /
Return audio:
Yes / No
EDID emulation:
Yes, Advanced EDID Management
EDID emulation:
Yes, Advanced EDID Management
HDCP compliancy:
1.4
HDCP compliancy:
1.4
Audio capability:*
4 stereo PCM or HBR compressed
Video test pattern generator
480p, 576p or 720p with different patterns
(both outputs)
Audio capability:*
4 stereo PCM or HBR compressed
Weight:
110 g
Power consumption:
0.38 W (typ.), 2.88 W (max.)
Connectors:
DVI-D, HDMI
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +70 °C
Humidity:
10% to 90% non-condensing
Weight:
100 g
Power consumption:
0.38 W (typ.), 2.88 W (max.)
Connectors:
DVI
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +70 °C
Humidity:
10% to 90% non-condensing
*The transmitted audio depends on the Media connector. For final audio transmission
capabilities please see the chosen Media connectors audio specification.
*The transmitted audio depends on the Media connector. For final audio transmission
capabilities please see the chosen Media connectors audio specification.
www.lightware.eu
17
Video & Audio Output Modules
HDMI 1.3 Output Module
DVI Output Module
MODEX-AV-HDMI-OM
MODEX-AV-DVI-OM
Part No: 9161 0413
Part No: 9161 0430
Features
Features
■■ HDMI 1.3, DVI and HDCP 1.3 compliant
■■ 36-bit deep color support
■■ HDMI 1.3, DVI and HDCP 1.3 compliant
■■ 36‑bit deep color and Embedded Audio support
Specifications
Specifications
Max resolution:
1920x1200 @ 36bit
1600x1200 @ 24bit
Max resolution:
1920x1200 @ 36bit
1600x1200 @ 24bit
Color depth:
24, 30, 36 bit deep color
Color depth:
24, 30, 36 bit deep color
Color space:
RGB, YCbCr 4:4:4/4:2:2
Color space:
RGB, YCbCr 4:4:4/4:2:2
Frame delay:
No delay
Frame delay:
No delay
Data rate:
Total max 6,75 Gbps
Data rate:
Total max 6,75 Gbps
Max pixel clock:
225 MHz
Max pixel clock:
225 MHz
Supported video standards: DVI 1.0, HDMI 1.3a
Supported video standards: DVI 1.0, HDMI 1.3a
3D support:
No
3D support:
No
Embedded audio /
Return audio:
Yes / No
Embedded audio /
Return audio:
Yes / No
EDID emulation:
Yes, Advanced EDID Management
EDID emulation:
Yes, Advanced EDID Management
HDCP compliancy:
1.3
HDCP compliancy:
1.3
Audio capability:*
4 stereo PCM or HBR compressed
Audio capability:*
4 stereo PCM or HBR compressed
Weight:
95 g
Weight:
95 g
Power consumption:
0,4 W (typ.) 0,7 W (max.)
Power consumption:
0,4 W (typ.) 0,7 W (max.)
Connectors:
HDMI
Connectors:
DVI-D
ESD protection:
IEC61000−4−2 Level 4
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +70 °C
Storage temperature:
-20°C - +70 °C
Humidity:
10% to 90% non-condensing
Humidity:
10% to 90% non-condensing
*The transmitted audio depends on the Media connector. For final audio transmission
capabilities please see the chosen Media connectors audio specification.
*The transmitted audio depends on the Media connector. For final audio transmission
capabilities please see the chosen Media connectors audio specification.
www.lightware.eu
18
Video & Audio Input Modules
Dual-Link DVI Output Module
DisplayPort 1.1 Output Module
MODEX-AV-DVIDL-OM
MODEX-AV-DP-OM
Part No: 9161 0404
Part No: 9161 0422
Features
Features
■■
■■
■■
■■
Pro series Dual‑Link DVI output module
Resolution up to 2560 x 1600, 1920x1200@120Hz
HDCP 1.3 compliant
DVI output can power external peripheral devices on the +5V port
with 500 mA max current limit.
Specifications
bandwidth speed
■■ Audio embedding, de‑embedding
■■ HDCP 1.3 compliant
■■ Compatible with Apple Cinema Display, 27” and 30” LCD displays
Specifications
Max resolution:
2560x1600 @ 60Hz
1920x1200 @ 120Hz
Max resolution:
2560x1600 @ 60Hz
Color depth:
8 bit per color
Color depth:
24,30,36 bit deep color
Color space:
RGB
Color space:
Frame delay:
No delay
RGB/YUV (4:4:4) – 10-bit color
YUV (4:2:2/4:2:0) – 12-bit color
RGB (4:4:4) to YUV (4:4:4)
Data rate:
Total max 9,9 Gbps
Frame delay:
No delay
Max pixel clock:
165 MHz
Data rate:
Total max: 10.8 Gbps (1.62/2.7 Gbps/lane)
Supported video standards: DVI 1.0
■■ Transmits DisplayPort 1.1a signals with Embedded Audio
■■ Up to 2560 x 1600 pixel resolution with 10.8 Gbps
Supported video standards: DP 1.1a compliant
3D support:
Yes
No / No
Embedded audio
Yes
EDID emulation:
Yes, Advanced EDID Management
EDID emulation:
Yes, Advanced EDID Management
HDCP compliancy:
1.3
HDCP compliancy:
1.3
Audio capability:*
4 stereo PCM or HBR compressed
3D support:
Yes
Embedded audio /
Return audio:
Audio capability:
Not supported
Weight:
95 g
Weight:
100 g
Power consumption:
0,8 W (typ.) 2,5 W (max.)
Power consumption:
3,5 W (typ.) 3,5 W (max.)
Connectors:
Standard DisplayPort gold plated connector
Connectors:
DVI-D
ESD protection:
IEC61000−4−2 Level 4
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +70 °C
Storage temperature:
-20°C - +70 °C
Humidity:
10% to 90% non-condensing
Humidity:
10% to 90% non-condensing
*The transmitted audio depends on the Media connector. For final audio transmission
capabilities please see the chosen Media connectors audio specification.
www.lightware.eu
19
Interface Modules
Ethernet 10/100 Mbit Module
Interface Modules
MODEX-IF-ETH
The MODEX architecture allows each transmitter and receiver to support
a wide variety of auxiliary signal types through the interface modules. All
auxiliary signal types can be simultaneously transmitted at full bandwidth
over fiber optical or twisted pair cables, reducing the need for additional
extenders and cabling.
MODEX frames have auxiliary interface slots, adding control signal,
audio or Ethernet.
Part No: 9161 0718
Features
■■ 10/100 Mbit Ethernet transmission
■■ Full duplex autodetect connection
■■ PoE is not supported, but can connect to PoE devices
Specifications
Ethernet data rate:
10/100Base-T, full duplex with autodetect
Ethernet protocol:
ARP, ICMP (ping), IP, TCP, DHCP, HTTP,
SMTP, Telnet
Power over Ethernet:
Not supported
Auto-MDIX:
Yes
Weight:
70 g
Power consumption:
0,05 W (typ.) 0,066 W (max.)
Connectors:
1 RJ-45
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +70 °C
Humidity:
10% to 90% non-condensing
www.lightware.eu
20
Interface Modules
RS-232 and Two-port Ethernet 10/100 Mbit Module
Ethernet 4 port 10/100 Mbit Module
MODEX-IF-2ETH-RS232
MODEX-IF-4ETH
Part No: 9161 0730
Part No: 9161 0726
Features
Features
■■
■■
■■
■■
■■
■■
■■ FFour RJ‑45 connectors
■■ 10/100 Mbit Ethernet transmission
■■ PoE is not supported, but can connect to PoE devices
Two RJ‑45 and an RS‑232 connectors
10/100 Mbit Ethernet transmission
Bi-directional RS‑232 for AV device control
Configurable RS‑232 baud rate
Full duplex autodetect connection
PoE is not supported, but can connect to PoE devices
Specifications
Specifications
Ethernet data rate:
10/100Base-T, full duplex with autodetect
Ethernet data rate:
10/100Base-T, full duplex with autodetect
Ethernet protocol:
ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP,
Telnet
Ethernet protocol:
ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP,
Telnet
Power over Ethernet:
Not supported
Power over Ethernet:
Not supported
Auto-MDIX:
Yes
Auto-MDIX:
Yes
Weight:
75 g
Supported baud rate:
2400 / 4800 / 9600 / 19200 / 38400 / 57600 /
115200 / 128000 / 153600 / 230400 / 256000
(configurable)
Power consumption:
1,5 W (typ.) 2,3 W (max.)
Connectors:
4 x RJ-45
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Signal type:
RX/TX bi-directional
Weight:
85 g
Storage temperature:
-20°C - +70 °C
Power consumption:
1,5 W (typ.) 2,3 W (max.)
Humidity:
10% to 90% non-condensing
Connectors:
2 x RJ-45, male 9-pole D-sub male
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +70 °C
Humidity:
10% to 90% non-condensing
www.lightware.eu
21
Interface Modules
Ethernet 10/100 Mbit Module with EtherCON Connector
Digital and Analog Audio Input Module
MODEX-IF-ETH-ECN
MODEX-IF-AUDIN
Part No: 9161 0727
Part No: 9161 0719
Features
■■
■■
■■
■■
Features
■■ S SPDIF 5.1 audio input with two‑channel stereo and 5.1 digital
DDurable latch lock Neutric EtherCON connector
10/100 Mbit Ethernet transmission
Full duplex autodetect connection
PoE is not supported, but can connect to PoE devices
audio up to 24‑bit, 96 kHz
■■ Balanced analog audio input
■■ Gain, volume level control and phase inversion
Specifications
Ethernet data rate:
10/100Base-T, full duplex with autodetect
Ethernet protocol:
ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP,
Telnet
Power over Ethernet:
Not supported
Auto-MDIX:
Yes
Weight:
75 g
Power consumption:
0,1 W (typ.) 0,2 W (max.)
Connectors:
Neutrik Ethercon RJ-45 receptacle
with latch lock (NE8FBH-S)
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +70 °C
Humidity:
10% to 90% non-condensing
Specifications
S/PDIF Digital Audio
Audio formats:
S/PDIF
Supported sample rates:
16 to 48 kHz
AES/EBU compatibility:
No
Bit depths:
Up to 24 bit
Analog Audio
Sample frequency:
16 to 96 kHz
Maximum level:
Input: 4.4 Vp-p
Frequency response:
20Hz to 20 kHz: ±1dB
Gain:
-5dB to 19dB;
Input impedance:
28 kΩ
Weight:
80 g
Power consumption:
0,2 W (typ.) 0,33 W (max.)
Connectors:
1 x RCA, 1 x 5 pole PHOENIX
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +70 °C
Humidity:
10% to 90% non-condensing
www.lightware.eu
22
Interface Modules
Digital and Analog Audio Output Module
Digital and Analog Bi-directional Audio Module
MODEX-IF-AUDOUT
MODEX-IF-AUD
Part No: 9161 0720
Part No: 9161 0721
Features
Features
■■ SPDIF 5.1 audio input with two‑channel stereo and 5.1 digital
■■ SPDIF 5.1 audio input and output withtwo‑channel stereo and 5.1
■■ Balanced analog audio input
■■ Gain, volume level control and phase inversion
■■ Balanced analog audio input and output
■■ Gain, volume level control and phase inversion
Specifications
Specifications
audio up to 24‑bit, 96 kHz
S/PDIF Digital Audio
digital audio up to 24‑bit, 96 kHz
S/PDIF Digital Audio
Audio formats:
S/PDIF
Audio formats:
S/PDIF
Supported sample rates:
16 to 48 kHz
Supported sample rates:
16 to 48 kHz (input), 16 to 48 kHz (output)
AES/EBU compatibility:
No
AES/EBU compatibility:
No
Bit depths:
Up to 24 bit
Bit depths:
Up to 24 bit
Analog Audio
Analog Audio
Sample frequency:
16 to 96 kHz
Sample frequency:
16 to 96 kHz
Maximum level:
4.4 Vp-p (6 dBu)
Maximum level:
Input: 4.4 Vp-p; output: 4.4 Vp-p (6 dBu)
Frequency response:
20Hz to 20 kHz: ±1dB
Frequency response:
20Hz to 20 kHz: ±1dB
Gain:
+5dB to -73dB (and -∞dB)
Gain:
Output impedance:
1.2 kΩ
Input: -5dB to 19dB;
Output: +5dB to -73dB (and -∞dB)
Input/output impedance:
Input: 28 kΩ, output: 1.2 kΩ
Weight:
80 g
Power consumption:
0,2 W (typ.) 0,33 W (max.)
Weight:
90 g
Connectors:
1 x RCA, 1 x 5 pole PHOENIX
Power consumption:
0,2 W (typ.) 0,33 W (max.)
ESD protection:
IEC61000−4−2 Level 4
Connectors:
2 x RCA, 2 x 5 pole PHOENIX
Operation temperature:
0°C - +50 °C
ESD protection:
IEC61000−4−2 Level 4
Storage temperature:
-20°C - +70 °C
Operation temperature:
0°C - +50 °C
Humidity:
10% to 90% non-condensing
Storage temperature:
-20°C - +70 °C
Humidity:
10% to 90% non-condensing
www.lightware.eu
23
Interface Modules
RS-232 and IR Module
RS-232 Module
MODEX-IF-RS232-IR
MODEX-IF-RS232
Part No: 9161 0715
Part No: 9161 0712
Features
Features
■■ Bi-directional RS-232 for AV device control
■■ Bi-directional IR control
■■ Configurable RS-232 baud rate
■■ Bi-directional RS-232 for AV device control
■■ Configurable RS-232 baud rate
Specifications
Specifications
RS-232
RS-232
Supported baud rate:
2400 / 4800 / 9600 / 19200 / 38400 / 57600 /
115200 / 128000 / 153600 / 230400 / 256000
(configurable)
Supported baud rate:
2400 / 4800 / 9600 / 19200 / 38400 / 57600 /
115200 / 128000 / 153600 / 230400 / 256000
(configurable)
Signal type
RX/TX bi-directional
Signal type
RX/TX bi-directional
Weight:
60 g
Power consumption:
0,1 W (typ.) 0,2 W (max.)
Connectors:
9-pole D-sub male
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +70 °C
Humidity:
10% to 90% non-condensing
IR
Supported frequencies
(input carrier freq):
38 kHz
Supported frequencies
(output carrier freq):
38 kHz (configurable)
Weight:
65 g
Power consumption:
0,1 W (typ.) 0,2 W (max.)
Connectors:
2 x 3.5mm TRS connector (1/8'' mini-jack)
9-pole D-sub male
ESD protection:
No
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +70 °C
Humidity:
10% to 90% non-condensing
www.lightware.eu
24
Interface Modules
RS-232 Double Module
RS-232 and RS-422 Module
MODEX-IF-2xRS232
MODEX-IF-RS232-RS422
Part No: 9161 0713
Part No: 9161 0714
Features
Features
Specifications
Specifications
■■ Bi-directional RS-232 for AV device control
■■ Configurable RS-232 baud rate
■■ Bi-directional RS-232 for AV device control
■■ Bi-directional RS-422 control
■■ Configurable RS-232/422 baud rate
RS-232 Double
RS-232
Supported baud rate:
2400 / 4800 / 9600 / 19200 / 38400 / 57600 /
115200 / 128000 / 153600 / 230400 / 256000
(configurable)
Supported baud rate:
2400 / 4800 / 9600 / 19200 / 38400 / 57600 /
115200 / 128000 / 153600 / 230400 / 256000
(configurable)
Signal type
RX/TX bi-directional
Signal type
RX/TX bi-directional
Weight:
70 g
RS-422
Power consumption:
0,1 W (typ.) 0,2 W (max.)
Pin assigment:
1: RX-, 2:RX+, 3:TX+, 4:TX-, 5:GND
Connectors:
2 x 9-pole D-sub male
Signal levels:
±5 V
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Weight:
70 g
Storage temperature:
-20°C - +70 °C
Power consumption:
0,1 W (typ.) 0,2 W (max.)
Humidity:
10% to 90% non-condensing
Connectors:
2 x 9-pole D-sub male
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +70 °C
Humidity:
10% to 90% non-condensing
www.lightware.eu
25
Interface Modules
RS-422 and 2 x Ethernet 10/100 Mbit Module
IR and 2xEthernet 10/100 Mbit Module
MODEX-IF-2ETH-RS422
MODEX-IF-2ETH-IR
Part No: 9161 0731
Part No: 9161 0732
Features
Features
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
Two RJ‑45 and an RS‑422 connectors
10/100 Mbit Ethernet transmission
Bi-directional RS‑422 for AV device control
Configurable RS‑422 baud rate
PoE is not supported, but can connect to PoE devices
Specifications
Two RJ‑45 and one IR ports
10/100 Mbit Ethernet transmission
IR for AV device control
Full duplex autodetect connection
PoE is not supported, but can connect to PoE devices
Specifications
Ethernet data rate:
10/100Base-T, full duplex with autodetect
Ethernet data rate:
10/100Base-T, full duplex with autodetect
Ethernet protocol:
ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP,
Telnet
Ethernet protocol:
ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP,
Telnet
Power over Ethernet:
Not supported
Power over Ethernet:
Not supported
Auto-MDIX:
Yes
Auto-MDIX:
Yes
Weight:
85 g
Weight:
80 g
Power consumption:
1.5 W (typ) 2.3 W (max)
Power consumption:
1.5 W (typ) 2.3 W (max)
Connectors:
2 x RJ-45, 9-pole D-sub male
Connectors:
ESD protection:
IEC61000−4−2 Level 4 0
2 x 3.5mm TRS connector (1/8'' mini-jack)
2 x RJ-45
Operation temperature:
0°C - +50 °C
ESD protection:
IEC61000−4−2 Level 4 0
Storage temperature:
-20°C - +85 °C
Operation temperature:
0°C - +50 °C
Humidity:
10% to 90% non-condensing
Storage temperature:
-20°C - +70 °C
Humidity:
10% to 90% non-condensing
Supported BAUD Rate:
2400 / 4800 / 9600 / 19200 / 38400 / 57600 /
115200 / 128000 / 153600 / 230400 / 256000
(configurable)
IR
Supported frequencies
(input carrier freq):
38 kHz
Signal type:
RX/TX bi-directional
38 kHz (configurable)
Pin assignment:
1: RX-, 2:RX+, 3:TX+, 4:TX-, 5:GND
Supported frequencies
(output carrier freq):
Signal levels:
±5 V
RS-422
www.lightware.eu
26
Summary
Frames
MODEX-F15-OPTS-TX
MODEX-OPTS-TX - Singlemode fiber optical transmitter frame with USB KVM and Ethernet ports
9161 0108
MODEX-F15-OPTS-RX
MODEX-OPTS-RX - Singlemode fiber optical receiver frame with USB KVM and Ethernet ports
9161 0109
MODEX-F15-OPTM-TX
MODEX-OPTM-TX - Multimode fiber optical transmitter frame with USB KVM and Ethernet ports
9161 0110
MODEX-F15-OPTM-RX
MODEX-OPTM-RX - Multimode fiber optical receiver frame with USB KVM and Ethernet ports
9161 0111
Media Connector
MODEX-CON-OPTM-NT
OPTM multimode Media Core input/output with Neutrik OpticalCON DUO and IEC C14 AC inlet (RX/TX)
9161 0228
MODEX-CON-OPTS-NT
OPTS singlemode Media Core input/output with Neutrik OpticalCON DUO and IEC C14 AC inlet (RX/TX)
9161 0227
MODEX-CON-OPTM-NT-PCN
OPTM multimode Media Core input/output with Neutrik OpticalCON DUO and PowerCON AC inlet (RX/TX)
9161 0232
MODEX-CON-OPTS-NT-PCN
OPTS singlemode Media Core input/output with Neutrik OpticalCON DUO and PowerCON AC inlet (RX/TX)
9161 0231
MODEX-CON-OPTM-ODVA
OPTM multimode Media Core input/output with industrial LC ODVA compliant connector and IEC C14 AC inlet (RX/TX)
9161 0230
MODEX-CON-OPTS-ODVA
OPTS singlemode Media Core input/output with industrial LC ODVA compliant connector and IEC C14 AC inlet (RX/TX)
9161 0229
MODEX-CON-OPTM-SC
OPTM multimode Media Core input/output with SC optical connector and IEC C14 AC inlet (RX/TX)
9161 0238
MODEX-CON-OPTS-SC
OPTS singlemode Media Core input/output with SC optical connector and IEC C14 AC inlet (RX/TX)
9161 0237
MODEX-CON-OPTM-ST
OPTM multimode Media Core input/output with ST optical connector and IEC C14 AC inlet (RX/TX)
9161 0236 MODEX-CON-OPTS-ST
OPTS singlemode Media Core input/output with ST optical connector and IEC C14 AC inlet (RX/TX)
9161 0235 Alternative versions (E.g. EBC Mini, EBC Junior, HICON Hi-Fiber4, Lemo 3K.93C, etc.) Call sales for availability
Call
Video & Audio modules
MODEX-AV-DVIDL-IM
Dual-Link DVI input module
9161 0401
MODEX-AV-DVIDL-OM
Dual-Link DVI output module
9161 0404
MODEX-AV-HDMI-DVI-IM
HDMI 1.3 and DVI input module
9161 0407
MODEX-AV-HDMI-DVI-4K-IM
HDMI and DVI 3D and 4K input module
9161 0410
MODEX-AV-HDMI-OM
HDMI 1.3 output module
9161 0413
MODEX-AV-HDMI-4K-OM
HDMI 3D and 4K output module
9161 0416
MODEX-AV-DP-IM
DisplayPort 1.1 input module
9161 0419
MODEX-AV-DP-OM
DisplayPort 1.1 output module
9161 0422
MODEX-AV-3GSDI-IM
3G-SDI input module with 2 SDI loop out
9161 0426
MODEX-AV-DVI-OM
DVI output module
9161 0430
MODEX-AV-DVI-IM
DVI input module
9161 0433
MODEX-AV-DVI-4K-OM
4K UHD DVI output module
9161 0436
MODEX-AV-HDMI-DVI-4K-OM
4K UHD HDMI and DVI dual output module
9161 0439
MODEX-AV-BLANK
Blank panel for video module slot
9161 0699
8 GPIO module
9161 0701
Interface modules
MODEX-IF-8GPIO*
MODEX-IF-2x8GPIO*
16 GPIO module
9161 0702
MODEX-IF-8GPIO-3RELAY*
8 GPIO and 3 Relay module
9161 0703
MODEX-IF-8GPIO-RS232*
8 GPIO and RS-232 module
9161 0704
MODEX-IF-8GPIO-RS422*
8 GPIO and RS-422 module
9161 0705
MODEX-IF-8GPIO-IR*
8 GPIO and IR module
9161 0706
MODEX-IF-3RELAY*
3 Relay module
9161 0707
MODEX-IF-2x3RELAY*
6 Relay module
9161 0708
MODEX-IF-3RELAY-RS232*
3 Relay and RS-232 module
9161 0709
MODEX-IF-3RELAY-RS422*
3 Relay and RS-422 module
9161 0710
MODEX-IF-3RELAY-IR*
3 Relay and IR module
9161 0711
MODEX-IF-RS232
RS-232 module
9161 0712
MODEX-IF-2xRS232
RS-232 double module
9161 0713
MODEX-IF-RS232-RS422
RS-232 and RS-422 module
9161 0714
MODEX-IF-RS232-IR
RS-232 and IR module
9161 0715
www.lightware.eu
27
Summary
MODEX-IF-MIC*
Microphone/Line input module with phantom power
9161 0716
MODEX-IF-ETH
Ethernet 10/100 Mbit module
9161 0718
MODEX-IF-AUDIN
Digital and analog audio input module
9161 0719
MODEX-IF-AUDOUT
Digital and analog audio output module
9161 0720
MODEX-IF-AUD
Digital and analog bi-directional audio module
9161 0721
MODEX-IF-DSPIN*
Digital and analog audio input module with Dolby & DTS decoder (DSP)
9161 0722
MODEX-IF-DSPOUT*
Digital and analog audio output module with Dolby & DTS decoder (DSP)
9161 0723
MODEX-IF-DSP*
Digital and analog bi-directional audio module with Dolby & DTS decoder (DSP)
9161 0724
MODEX-IF-4ETH
4 ports Ethernet 10/100 Mbit module
9161 0726
MODEX-IF-ETH-ECN
Ethernet 10/100 Mbit module with EtherCON connector
9161 0727
MODEX-IF-2ETH-8GPIO*
2 ports Ethernet 10/100 Mbit and 8 GPIO module
9161 0728
MODEX-IF-2ETH-3Relay*
2 ports Ethernet 10/100 Mbit and 3 Relay module
9161 0729
MODEX-IF-2ETH-RS232
RS-232 and 2 port Ethernet 10/100 Mbit module
9161 0730
MODEX-IF-2ETH-RS422
2 ports Ethernet 10/100 Mbit and RS422 module
9161 0731
MODEX-IF-2ETH-IR
2 ports Ethernet 10/100 Mbit and IR module
9161 0732
MODEX-IF-BLANK
Blank panel for interface module slot
9161 0999
*under development
www.lightware.eu
28
MODEX Configurations
Creating and ordering a MODEX Configuration
The right configuration for an application can be virtually built online
by following the four configuration steps and selecting the right frames
and modules. Based on the created configuration the MODEX unit can be
ordered. The best way to do this is by creating a list of the five selected part
numbers. Please try our online MODEX configurator, which is available at
buildyourmodex.com
See Example 1 and 2 below for typical order list samples.
Example 1
MODEX frame
MODEX-F15-OPTS-TX
MODEX frame
MODEX-F15-OPTS-RX
9161 0108
Media connector
Media connector
MODEX-CON-NT-OPTS
MODEX-CON-NT-OPTS
9161 0227
AV-HDMI-4K-OM
9161 0410
9161 0416
Interface modules
Interface modules
MODEX-IF-RS232-IR
MODEX-IF-AUD
9161 0227
Video module MODEX-
Video module MODEXAV-HDMI-DVI-4K-IM
9161 0109
MODEX-IF-AUDOUT
Blank panel
9161 0715
9161 0721
9161 0720
9161 0999
Example 2
MODEX frame
MODEX-F15-OPTM-TX
MODEX frame
MODEX-F15-OPTM-RX
9161 0110
Media connector
Media connector
MODEX-CON-OPTM-NT-PCN
MODEX-CON-OPTM-NT-PCN
9161 0232
AV-DVI-OM
9161 0426
9161 0430
Interface modules
Interface modules
Blank panel
Blank panel
9161 0232
Video module MODEX-
Video module MODEXAV-3GSDI-IM
9161 0111
MODEX-IF-AUDOUT
MODEX-IF-AUDOUT
9161 0999
9161 0999
www.lightware.eu
9161 0720
9161 0720
29
25G HYBRID Switcher with MODEX
Integrated System
CINEMA
THEATER
Projector
Eth.
Projector
DVI-DL
Laptop
MODEX receiver
Blu-Ray Player
VGA
104
104
DVI
RS-232
MODEX receiver
audio
S/PDIF
Blu-Ray Player IR emitter
Ethernet
HDMI
IR
HDMI
Media receiver Speakers
103
103
Speakers
MODEX transmitter
RS-232
MODEX transmitter
Ethernet
Touch control
Touch control
CONFERENCE ROOM 1
CONFERENCE ROOM 2
Keyboard
Mouse Display
DVI
Display
IR emitter
Projector
DVI
104
Camera
SDI
MODEX receiver
103
Normal
Prog
Ethernet
HDMI-TPS-RX90
Receiver
HDCP
VIDEO
LINK
LIVE
RS-232
IR IN
DVI
IR OUT
TPS receiver
MODEX transmitter
HDMI-TPS-RX90
Receiver
HDCP
VIDEO
LINK
LIVE
RS-232
Normal
Prog
IR IN
IR OUT
TPS receiver
Ethernet
L
R
VIDEO
AUDIO
VGA INPUT
S/PDIF INPUT
HDMI
VGA
HDMI
ANALOG
S/PDIF
VIDEO
SELECT
INPUT STATUS
AUDIO
SELECT
103
HDMI INPUT
ANALOG AUDIO
INPUT
Touch control
UMX-TP transmitter
MODEX transmitter
DVI
DVD Player
DP
USBHID
DVI
USB- DVI
HID
VGA
Laptop
PC
PC
HDMI
PC
PC
25G HYBRID Signal Management
with MODEX Extenders
MODEX extenders connected to a 25G matrix as end-points combine into
a full signal path infrastructure from end to end. The Hybrid hardware and
software design allows switching and transmission of all signals over
one single fiber or CAT cable in a single router. The 25G Hybrid matrix
is the world’s first fully compatible HDMI 1.4 matrix switcher that also
provides HEC and ARC functions, supports 4K resolutions and full 3D
formats. 25G Hybrid has eight separate Media Layers, establishing the
expression and the method of Multilayer Switching.
25G Hybrid switchers do not only handle inputs and outputs, because
our design engineers have added a third dimension, the Media Layers.
A 25G Hybrid router has as many Media Layers as signal types, which
means that there are so many individual routers included, as many signal
formats are incorporated.
MODEX extenders can function as far end connection points of these
layers, granting the user limitless variability and a wide range of
installation options.
www.lightware.eu
30
Applications & Accessories
USB KVM Standalone Application Diagram
MODEX transmitter
MODEX receiver
Fiber
USB
USB
DisplayPort
PC
RCA
Keyboard Mouse
Dual-Link DVI
Speakers Dual-Link display
Any transmitter can be connected to any receiver: the DisplayPort input is converted to Dual-Link output automatically by the MODEX transmitting the USB
KVM device signals as well.
Rental and Staging Application Diagram
Projector and MODEX boxes
are controlled by laptop
LAN
Laptop
Media receiver Speakers
RCA
Fiber
MODEX transmitter
MODEX receiver
SDI
Broadcast panel
Ethernet
DVI
Projector
SDI transmitter connects directly to the DVI receiver. The transmission is format free; MODEX sends the video pixels regardless of the video format.
Optional Accessories
Devices can be mounted in several ways, depending on the application.
Rack shelf and mounting brackets are available and offer easy mounting
on truss systems with standard clamps or can be used to build the unit
into a piece of furniture.
Mounting Bracket V2 Part No: 5240 0273
This mounting bracket makes through-furniture and under-desk mounting
easy and allows truss mounting with standards clamps for our MODEX family
and other upcoming extenders as well.
Rack Shelf Part No: 5240 0935
1U high rack shelf provides mounting holes for fastening two half-rack sized units.
www.lightware.eu
31
©2015 Lightware Visual Engineering. All rights reserved. All trademarks mentioned are the property of their respective owners.
Specifications subject to change without notice.
www.lightware.eu
Ver 3, 2017 July
Download PDF