4K HDMI® Switchers Manual MVS-AH51-01NQ MVS-AH31-01NQ MVS-AH31-01NQ MVS-AH51-01NQ 4K 3x1 HDMI Switcher 4K 5x1 HDMI Switcher Add up to five HDMI inputs to almost any high-definition TV or HDMI display Supports up to 4K/2K resolution and 3D video Individual status LEDs for each HDMI input 4K 3D Support Support Switch will automatically select the active input for added convenience Includes remote control for switching between inputs HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. ENFORCER 4K HDMI Switchers Introduction: The ENFORCER 4K HDMI Switchers allow easy switching between multiple HDMI sources. The switchers work with most HDMI devices, delivering the very best in digital audio and video signals with HD resolutions of up to 4K/2K. An included remote control easily switches between HDMI sources. LED Indicators clearly display the HDMI source being used. The switcher will automatically select the active input for added convenience. The 4K HDMI Switchers can be daisy chained up to four levels for even more inputs. Specifications: Model Type Input video signal Input DDC signal Maximum single link range Deep color Video formats supported Audio formats supported Output video Resolutions supported Video amplifier bandwidth Video input connector Max. input cable length Video output connector Max. output cable length IR pass-through Operating voltage Power supply ESD protection Current draw Operating temperature Operating humidity Dimensions Weight MVS-AH31-01NQ MVS-AH51-01NQ HDMI Switcher 3.3V 5Vp-p (TTL) 4K*2K@30hz 48bit High-speed HDMI, HDCP 1.4 LPCM, Dolby-AC3, DTS7.1, DSD HDMI 4K/1080p/1080i/720p/576p/576i/480p/480i 10.2Gbps 3x HDMI Type A 19-pin female 5x HDMI Type A 19-pin female 24AWG (15m), 26AWG (10m), 28AWG (5m) 1x HDMI Type A 19-pin female 24AWG (15m), 26AWG (10m), 28AWG (5m) 38kHz 5VDC USB Power ±8kV (air-gap discharge), ±4kV (contact discharge) 150mA@5VDC 250mA@5VDC 32°~104° F (0°~40° C) 20~90% RH (no condensation) 37/16"x23/8"x3/4" (87x60x19 mm) 2.1-oz (60g) Installation: 1. Determine the location where the HDMI Switcher will be installed in relation to the HDMI sources and HDMI display. 2. Plug the HDMI sources into the HDMI connector inputs on the front or back of the switcher. 3. Plug the HDMI display into the HDMI connector output on the front of the switcher. 4. Plug the USB power cable into the switcher and the other end into a powered USB port on the display or one of the sources. 5. Plug the IR receiver dongle into the IR receiver port and place in view of the HDMI display 6. Turn the power on the HDMI sources and display device. Using the included remote or selection button on the switcher, change the HDMI sources going to the HDMI display. 2 SECO-LARM U.S.A., Inc. ENFORCER 4K HDMI Switchers Parts List: 1x 4K HDMI Switcher 1x Remote control 1x Remote control battery 1x USB power cable 1x Manual 1x IR receiver Overview: Remote Switcher 2 3 /8 " (60mm) IN1 IN2 IN4 * IN5 * IN3 3 3 /8 " (86mm) * * * * 37/16" (87mm) 3 /4 " (19mm) 19/16" (40mm) * MVS-AH51-01NQ only Sample Application: Cable Legend: HDMI Power IR HDMI Sources HDMI Sources HDMI Display IR RX USB power cable HDMI Switch Remote For maximum cable length, see Specifications. SECO-LARM U.S.A., Inc. 3 ENFORCER 4K HDMI Switchers Troubleshooting: HDMI Device does not function correctly. Make sure the switcher is powered. Make sure the source(s) and display are powered. Make sure that there are no problems with the HDMI source, HDMI cables, or HDMI display by plugging a source directly into the display using the HDMI cables. Make sure that the source(s) and display are plugged in to the correct connectors. Make sure the HDMI source(s) are compatible with the HDMI display. Also Available from SECO-LARM® : 4K HDMI Splitters MVD-AH14-01Q shown MVD-AH12-01Q 2 HDMI outputs MVD-AH14-01Q 4 HDMI outputs MVD-AH18-01Q 8 HDMI outputs Supports 3D video Supports 4K resolution EDID management settings High-Speed HDMI Cables MC-1102-18NQ MC-1102-03FQ MC-1102-06FQ MC-1102-10FQ MC-1102-16FQ MC-1102-20FQ MC-1102-25FQ MC-1102-30FQ MC-1102-50FQ 1.5ft (0.5m), 28AWG 3ft (1m), 28AWG 6m (1.83m), 28AWG 10ft (3m), 28AWG 16ft (5m), 28AWG 20ft (6m), 26AWG 25ft (7.6m), 26AWG 30ft (9m), 26AWG 50ft (15m), 26AWG Supports 3D video Supports 4K resolution Supports Ethernet Lifetime warranty HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for the one (1) year from the date of sale to the original customer. SECO-LARM’s obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment is not operating properly as a result of causes other than defects in material and workmanship. The sole obligation of SECO-LARM and the purchaser’s exclusive remedy shall be limited to the replacement or repair only, at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property damage of any kind to the purchaser or anyone else. NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right to change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors. Copyright © 2016 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in part, without the written permission of SECO-LARM. SECO-LARM® U.S.A., Inc. 16842 Millikan Avenue, Irvine, CA 92606 Tel: (949) 261-2999 | (800) 662-0800 4 Website: www.seco-larm.com Email: firstname.lastname@example.org PICHN3 MI_MVS-AHx1-01NQ_160226.docx SECO-LARM U.S.A., Inc.