Kube Audio Clock User Manual

TM
Model KS Clock
Charging Station with
Bluetooth Audio and
Alarm Clock
User Guide
Please read these instructionscompletely
before operating this product.
Version 1.1
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS..............................................................................2
INTRODUCTION...................................................................................................................4
Getting to Know Your Alarm Clock.....................................................................................4
AC Connection...................................................................................................................6
Auto-Dimming Display........................................................................................................6
OPERATION.........................................................................................................................7
Kensington® Lock Installation - Example 1.........................................................................7
Kensington® Lock Installation - Example 2.........................................................................8
Threaded Security Bolt Installation - Example 1..................................................................9
Threaded Security Bolt Installation - Example 2................................................................10
Setting the Time.............................................................................................................. 11
DST (Daylight Saving Time)...............................................................................................12
Setting the Alarm Time......................................................................................................12
Turning Off the Alarm........................................................................................................13
Snooze.............................................................................................................................13
Pairing Via Bluetooth.........................................................................................................14
Connecting Via AUX Input.................................................................................................14
CHARGING........................................................................................................................ 15
Charging Via Qi Wireless Charging (Optional)....................................................................15
Charging Via Wired Chargers............................................................................................16
Charging Via USB Ports....................................................................................................16
SPECIFICATIONS.............................................................................................................. 17
TROUBLESHOOTING....................................................................................................... 17
KUBE SYSTEMS PRODUCTS LIMITED WARRANTY..................................................... 20
—1—
IMPORTANT SAFETY INSTRUCTIONS
PRODUCT SAFETY: When used in the directed manner, this unit has been designed and manufactured to ensure your
personal safety. Improper use of this product can result in potential electrical shock or fire hazards. Please read all safety and
operating instructions carefully before installation and use, and keep these instructions handy for future reference.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: To reduce the risk of electric shock do not remove cover (or
back). No user serviceable parts inside. Refer servicing to qualified service
personnel.
DANGEROUS VOLTAGE: The lightning flash with arrowhead, within an
equilateral triangle, is intended to alert the user to the presence of
uninsulated dangerous voltage within the product’s enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to persons.
ATTENTION: The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
This Class B digital apparatus complies with European Union CE – EMC Directive (2004/108/
EC) and European Union CE – Low Voltage Directive (2006/95/EC). This Bluetooth module
is in compliance with the essential requirements and other relevant provisions of R&TTE
Directive (1999/5/EC). This product is marked with the CE logo and uses radio frequency
bands that are harmonized throughout the European Community.
FCC Compliance Statement: This device complies with Part 15 of the FCC rules. Operation is
subjected to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may
cause undesired operation.
FCC WARNING
This equipment has been tested and found to comply with limits for a Class B digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in residential installations. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to radio or television equipment reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
•Reorient or relocate the receiving Antenna.
• Move the equipment away from the receiver.
• Plug the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for additional suggestions.
CAUTION: Any changes or modifications to this equipment not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
WARNING:
STRANGULATION HAZARD: Infants have STRANGLED in power cords. Keep power cords more than 3 feet away from
cribs, bassinets, play yards, and other safe sleep environments for infants.
—2—
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SERVICE SAFETY INSTRUCTIONS
Damages caused by non-compliance with this operating manual will void the warranty!
1. Read and Follow Instructions - All the safety and operating instructions should be read before
the product is operated. Follow all operating instructions.
2. Retain Instructions - The safety and operating instructions should be retained for future
reference.
3. Heed Warnings - Comply with all warnings on the product and in the operating instructions.
4. Power Sources - This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power supplied to your
location, consult your video dealer or local power company. For products intended to operate
from battery power, or other sources, refer to the operating instructions.
5. Overloading - Do not overload wall outlets or extension cords as this can result in the risk of
fire or electric shock. Overloaded AC outlets, extension cords, frayed power cords, damaged
or cracked wire insulation, and broken plugs are dangerous. They may result in a shock or fire
hazard. Periodically examine the cord, and if its appearance indicates damage or deteriorated
insulation, have it replaced by your service technician.
6. Power-Cord Protection - Power supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them. Pay particular attention to cords
at plugs, convenience receptacles, and the point where they exit from the product.
7. Surge Protectors - It is highly recommended that the video equipment be connected to a
surge protector. Doing so will protect the equipment from damage caused by power surges.
Surge protectors should bear the UL listing mark or CSA certification mark.
8. Uninterruptible Power Supplies (UPS) - It is recommended that you connect the product to an
uninterruptible power supply. An uninterruptible power supply has an internal battery that will
keep the product running in the event of a power outage. Uninterruptible power supplies should
bear the UL listing mark or CSA certification mark.
CAUTION: Maintain electrical safety. Power line operated equipment or accessories connected to
this product should bear the UL listing mark or CSA certification mark on the accessory itself and
should not be modified so as to defeat the safety features. This will help avoid any potential hazard
from electrical shock or fire. If in doubt, contact qualified service personnel.
9. Ventilation - Slots and openings in the case are provided for ventilation to ensure reliable
operation of the product and to protect it from overheating. These openings must not be
blocked or covered. The openings should never be blocked by placing the video equipment
on a bed, sofa, rug, or other similar surface. This product should never be placed near or over
a radiator or heat register. This product should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided and the product manufacturer’s
instructions have been followed.
10. Attachments - Do not use attachments unless recommended by the product manufacturer as
they may cause a hazard.
11. Water and Moisture - Do not use receivers or video monitors near water — for example, near
a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, near a swimming pool
and the like.
12. Heat - The product should be situated away from heat sources such as radiators, heat
registers, stoves, or other products (including amplifiers) that produce heat.
13. Accessories - Do not place this video equipment on an unstable cart, stand, tripod, or table.
The video equipment may fall, causing serious damage to the product. Use this product only
with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the
product. Any mounting of the product should follow the manufacturer’s instructions and use a
mounting accessory recommended by the manufacturer.
—3—
INTRODUCTION
Getting to Know Your Alarm Clock
FRONT/LEFT SIDE
HR (Hour) Button
Bluetooth PAIR Button
MIN (Minute Button)
Volume Up Button
SNOOZE Button
Volume Down Button
Alarm SET Button
Alarm ON/OFF Button
Clock Display
Apple® Lightning Connector
Micro USB Connector
REAR/RIGHT SIDE
Qi Wireless
Charging Pad (Optional)
Ambient Sensor
iPad USB Jack
iPod/iPhone USB Jack
Apple® 30-pin Connector
AUX Jack
DC IN Jack
Kensington® Lock
Attachment Point
—4—
INTRODUCTION
Getting to Know Your Alarm Clock
BOTTOM
Threaded Security Bolt Socket
Used to connect a security lanyard
or retractor.
TIME
SET
HOUR
MIN
DST
+1
DST
-1
DST –1 Button
DST +1 Button
MIN Button
HOUR Button
TIME SET Button
Speaker
—5—
INTRODUCTION
AC Connection
u
Insert the power supply plug into the
DC In jack on the rear of the unit.
v
Auto-Dimming Display
The ambient light sensor on the right
side of the unit will dim the clock display
when it detects the ambient light is low.
Make sure the right side of the unit is
clear of obstructions.
u
—6—
Insert the AC cord into the power
supply. Insert AC plug into an AC
outlet having 100-240v (50-60hz); the
clock display will show a time.
OPERATION
Kensington® Lock Installation - Example 1
If desired, tether to a wall or piece of furniture by attaching a Kensington® security cable to the
Kensington® Lock Attachment Point. Note that there are many types of Kensington® security
cables, the next two pages just show a couple of examples. Refer to the owner’s manual that
came with the security cable.
NOTE: Security cable/bolt/hardware not included.
TO ATTACH TO A TABLE LEG USING
KENSINGTON® KEYED LOCK:
u
Route the Kensington® security cable
around the leg of a table (or similar) and
then through the loop.
Insert the Kensington® Lock into the
Kensington® Lock Attachment Point.
v
Lock the Kensington® Lock using the
supplied key.
The unit is now secure.
w
—7—
OPERATION
Kensington® Lock Installation - Example 2
NOTE: Security cable/bolt/hardware not included.
TO ATTACH TO A PIECE OF
FURNITURE OR WALL:
u
Insert the Kensington® Combo Lock into
the Kensington® Lock Attachment Point.
Scramble Combo Lock combination to
lock.
Place the loop under a U-Bracket and
secure using the hardware included with
the Kensington® Kit (not included).
v
—8—
OPERATION
Threaded Security Bolt Installation - Example 1
If desired, tether to a wall or piece of furniture by attaching a security cable to the Threaded
Security Bolt Socket on the bottom of the unit. Note that there are many types of installations,
the next two pages just show a couple of examples. Refer to the owner’s manual that came
with the Security Cable Kit.
NOTE: Security cable/bolt/hardware not included.
TO ATTACH USING STANDARD
TETHER:
u
Bolt the eyelet of the cable into the
bottom of the unit using a Drilled
Spanner Screwdriver (shown below).
Secure using the hardware included with
the Kit (not included).
v
—9—
OPERATION
Threaded Security Bolt Installation - Example 2
NOTE: Security cable/bolt/hardware not included.
TO ATTACH USING RETRACTOR
WITH EYELET:
u
Bolt the eyelet side of the cable into
the bottom of the unit using a Drilled
Spanner Screwdriver (shown below).
Secure using the hardware included with
the Kit (not included).
v
— 10 —
OPERATION
Setting the Time
To set the time, turn the unit upside
down. Press and release the TIME SET
button on the bottom of the unit; the
time will flash in the display.
u
TIME
SET
HOUR
MIN
DST
+1
v
TIME
SET
DST
-1
Within 3 seconds, press the MIN
button to set the minutes. When done,
wait a few seconds and the clock will
stop flashing.
w
TIME
SET
HOUR
MIN
DST
+1
Within 3 seconds, press the HOUR
button to set the hour, making sure to
set the correct AM/PM.
DST
-1
— 11 —
HOUR
MIN
DST
+1
DST
-1
OPERATION
DST (Daylight Saving Time)
To enable daylight saving time, press
the DST +1 button; the time will
increase by one hour.
u
TIME
SET
HOUR
MIN
DST
+1
To cancel daylight saving time, press
the DST –1 button; the time will
decrease by one hour.
v
TIME
SET
DST
-1
HOUR
MIN
DST
+1
DST
-1
Setting the Alarm Time
Press and release the Alarm SET
button on the top of the unit; the Alarm
icon will flash in the display.
v
Within 3 seconds, press the MIN
button to set the minutes. When done,
wait a few seconds and the Alarm icon
will stop flashing.
x
u
w
— 12 —
Within 3 seconds, press the HOUR
button to set the alarm hour, making
sure to set the correct AM/PM.
To activate the alarm, press the Alarm
ON/OFF button once; the unit will beep
and the Alarm icon will appear in the
display.
OPERATION
Turning Off the Alarm
u
When the alarm is sounding, press
the Alarm ON/OFF button to turn it
off. It will NOT be set for the next day.
If desired, reset alarm following the
instructions above.
IMPORTANT ALARM NOTE:
•The Alarm will only go off once (single day
alarm) and will not repeat daily.
Snooze
While the alarm is sounding, press the
SNOOZE button; the alarm will turn
back on automatically 3 minutes later.
You can repeat the Snooze function
up to three times. The clock display
will pulse while the Snooze function is
activated.
u
— 13 —
OPERATION
Pairing Via Bluetooth
u
Press and release the Bluetooth button
on the top of the unit; the button will
flash blue and white.
v
On the Bluetooth device, enable
Bluetooth and select “KS-CLOCK”
from the Device List. It may take a few
seconds for it to appear.
Bluetooth
Bluetooth
ON
KS-CLOCK
w
Some Bluetooth devices will ask you to
accept the connection. If the units are
paired properly, the speaker will beep
and the Bluetooth icon will appear.
x
— 14 —
Start playback on the external device.
Adjust the volume using the external
device’s Volume buttons as well as the
Volume Up and Down buttons on this unit.
CHARGING
Connecting Via AUX Input
u
Insert one end of the audio cable
(included) into the LINE OUT jack
on your external audio unit and the
other end into the AUX IN jack on the
rear of this unit. The external device
will automatically be selected when
the audio cable is connected. Start
playback of the external unit and the
external audio unit’s output sound will
be heard through this unit’s speakers.
The Volume Up and Down buttons will
not work on this unit when connected
via the AUX IN jack. Use your external
device’s volume controls.
Charging Via Qi Wireless Charging (Optional)
u
Designed with inductive charging
capabilities, this unit allows you to
place your Qi compatible device on top
of the unit for wireless charging. It’s
that simple! Make sure your device is
Qi compatible or utilizes a Qi case or
other Qi charging option (both available
separately), then place the unit on top of
the Alarm Clock.
— 15 —
CHARGING
Charging Via Wired Chargers
u
Charge up to three devices using the
built-in Charging Cables. Simply pull out
the desired connector and insert it into
your device.
Apple® Lightning Connector Used for
charging newer Apple devices with the
Lightning jack.
Apple® 30-Pin Connector: Used for
Apple®
charging older Apple devices with the
Lightning Connector
30-pin jack.
Micro USB Connector
Micro USB Connector: Used for
charging devices that utilize the Micro
USB jack.
Apple®
30-pin Connector
Apple®
Lightning Connector
Micro USB Connector
Charging Via USB Ports
® additional devices
Charge upApple
to two
using the
two USB ports on the rear of
30-pin
Connector
the unit but it is not recommended as
it could disable the Bluetooth function.
These ports can output 2.4-Amps each.
Each outlet has its own intelligent autoconfiguring USB circuit that allows any
device to charge properly.
u
These ports are labeled, “iPod/
iPhone” and “iPad” but can be used to
connect most USB cables in order to
accommodate different connections.
CHARGING CABLES:
•The charging cables are replaceable if they become damaged.
•
Caution: Charging cables do not stretch.
— 16 —
SPECIFICATIONS
Specifications
Power Requirements............................................................................................... 12VDC, 5A
Operating Temperature..........................................................................................15° to 95° F
Weight................................................................................................................1.1 lbs (0.5 kg)
Dimensions (L x W x H)..................................... 4.13 x 4.13 x 2.28 inches (105 x 105 x 58 mm)
TROUBLESHOOTING
If you have any trouble with your system, try these simple steps which should handle most
common issues.
SYMPTOM:
Cannot change time display; pressing the TIME SET buttons does not do
anything.
SOLUTION(s): The unit has been locked out from manually changing the time. To change the
time, the unit has to be unlocked or the desired time needs to be set by the KS
Programmer. See Setting the Time section.
SYMPTOM:
The Alarm worked fine this morning but when attempting to activate it for
tomorrow morning, the unit beeps twice and indicates “Set Alarm”.
SOLUTION(s): The alarm of KS Clock is a one-day alarm. This means a user will always have
to manually set the alarm time for each use.
SYMPTOM:
KS Clock will not pair with a Bluetooth device.
SOLUTION(s): Enter Bluetooth list (in Setting’s menu of Bluetooth device) and delete any entry
named “KS CLOCK”. On Apple devices, this function may be executed by
selecting “Forget this device”. After erased, attempt to pair again; see Setting
the Time section.
SYMPTOM:
Pairing with a Bluetooth device was performed earlier and the device was left
connected for several hours. Will pairing be needed again?
SOLUTION(s): Check Bluetooth status on the device to find out. If the device indicates no
Bluetooth device, then pairing will need to be performed.
Check the Bluetooth icon display on the Clock. If the device is still connected
to KS Clock, the Bluetooth icon will be lit.
KS Clock will not actively disconnect any connected Bluetooth device. Most
devices do the same. Devices can remain connected constantly unless
manually disconnected or after a Power outage.
— 17 —
TROUBLESHOOTING
SYMPTOM:
KS Clock paired with a Bluetooth device earlier today (or yesterday) but it does
not work anymore now.
SOLUTION(s): Enter Bluetooth list (in Setting’s menu of Bluetooth device) and delete any entry
named “KS CLOCK”. On Apple devices, this function may be executed by
selecting “Forget this device”. After erased, attempt to pair again; see Setting
the Time section.
KS clock may be programmed by the KS Programmer to periodically stop
pairing with recent devices. The period of time for this function is defined
by the “Clear Pairing List” function of the KS Programmer. When KS clock
executes this function, the Bluetooth user will need to manually pair again with
KS Clock in order to re-establish Bluetooth connection. In order to prevent KS
Clock from rejecting the reconnection, ensure that the Bluetooth name KSCLOCK is deleted from the device list before re-pairing.
The clear pairing list cycle time begins from the time when this function was
programmed into KS Clock by the KS programmer. The function is suspended
while a device is connected.
SYMPTOM:
When playing music via the AUX Audio connection, pressing the Volume
button on top of KS Clock does not change the volume of the music.
SOLUTION(s): The volume buttons are only for Bluetooth music. Please use the volume on
your audio device to change the volume of music played on KS Clock.
SYMPTOM:
The clock display is too bright.
SOLUTION(s): The brightness setting is set by the KS Programmer. Please see KS
Programmer instructions. There is a setting for daytime and a separate setting
for nighttime.
SYMPTOM:
The clock display is too dim.
SOLUTION(s): Ensure that the right side of KS Clock has at least 1 inch of free area. There is
a small port hole on the right side where KS Clock has an ambient light sensor.
This sensor needs to be exposed to ambient room light so that when the room
is bright, the clock display will brighten up.
The brightness setting is set by the KS Programmer. Please see KS
Programmer instructions. There are separate settings for daytime and
nighttime.
SYMPTOM:
KS Clock is configured for manual time setting and the displayed time is now
DST. Pressing DST- does not do anything and pressing DST+ causes the time
to advance even further by another hour.
SOLUTION(s): The time was incorrectly set by a previous setup. Press the Clock set button
and manually change the time one hour behind. After correct setup, pressing
DST+ should advance the time by one hour to summer time, and pressing
DST- will skip back the time by one hour to Winter time.
— 18 —
TROUBLESHOOTING
SYMPTOM:
After connecting a device to one of the charger cables of KS Clock, the Apple
device indicates “Not Charging” or “Incompatible Device”.
SOLUTION(s): Unplug the Apple device from the KS Clock and then plug it back in.
Occasionally a loose connection in the plug may cause this. Lightly clean the
connector free of any foreign matter.
One device may be connected to each charging cable and to each USB outlet;
the KS Clock can simultaneously charge all the devices.
SYMPTOM:
After setting the alarm time, the alarm was not activated.
SOLUTION(s): After setting the alarm time, turn the alarm ON by pressing the Alarm ON/OFF
button. When the alarm is activated, the Alarm icon will appear in the clock
display.
SYMPTOM:
The Clock display does not show the time but instead displays “C2” or “CL”.
SOLUTION(s): The message “C2” indicates that there is a button that is constantly
depressed. Please pay particular attention to the buttons underneath the unit.
Make sure KS Clock is resting on a flat surface with no surface irregularities or
objects that can press upwards onto the buttons.
The message “CL” indicates a clock functional error. If this message persists,
the unit will need to be returned for service.
SYMPTOM:
The alarm was activated, but when the alarm time was reached and the alarm
sounded, nobody was around to turn off the alarm.
SOLUTION(s): The alarm will automatically turn off after 3 minutes of sound and will not sound
again.
SYMPTOM:
An alarm time was saved by the user via the Set Alarm button. However
the user decided not to activate the alarm. The next day, the user presses
the Alarm ON/OFF button to activate the alarm but KS Clock indicates “Set
Alarm”.
SOLUTION(s): KS Clock alarm is a one-day alarm. It will erase any user preset alarm time
after one day even if the alarm was never activated.
— 19 —
KUBE SYSTEMS PRODUCTS LIMITED WARRANTY
KUBE SYSTEMS, A DIVISION OF RAMLER INTERNATIONAL LTD.
WHAT IS COVERED AND FOR HOW LONG
If your product does not work properly because of a defect in materials or workmanship, Kube
Systems, a Division of Ramler International Ltd. (“Kube Systems”) products will, for the length
of the period indicated on the chart below, which starts with the date of original purchase (the
“Limited Warranty Period”), at its option either (a) repair your product with new or refurbished
parts, or (b) replace it with a new or refurbished product. When a product or part is exchanged,
any replacement item becomes your property and the replaced item becomes the property of
Kube Systems. The decision to repair or replace will be made by Kube Systems.
PRODUCT OR PART
NAME
PARTS LIMITED
WARRANTY PERIOD
LABOR LIMITED
WARRANTY PERIOD
KS Clock™ ONE (1) YEAR
ONE (1) YEAR
ONE (1) YEAR
KS Clock™ ROOM
PROGRAMMER
ONE (1) YEAR
ONE (1) YEAR
KS Portable™
ONE (1) YEAR
ONE (1) YEAR
KS Portable™ CHARGING
TRAY
ONE (1) YEAR
ONE (1) YEAR
During the “Parts” Limited Warranty Period, there will be no charge for parts. During the “Labor”
Limited Warranty Period there will be no charge for labor. If necessary repairs are not covered
by this Limited Warranty, or if a product is examined which is not in need of repair, you will
be charged for the repairs or examination. You must carry-in or mail-in your product during
the Limited Warranty Period. This Limited Warranty only applies to new products which were
not sold “as-is,” purchased and serviced either directly from Kube Systems or an authorized
distributor or dealer who was authorized by Kube Systems to sell such products at the time of
the original purchase.
WHO IS COVERED
This Limited Warranty is extended only to the original purchaser of a Kube Systems product,
and shall not be extended to any other person or transferee.
CARRY-IN OR MAIL-IN SERVICE
If your Kube Systems product ever needs service, please return the product to your distributor
or dealer. Otherwise, for carry-in or mail-in service please email us at support@kubesystems.
com. You must pay any shipping charges if it is necessary to ship the product for service.
Please note that shipping charges vary and may be higher for destinations outside of the United
States. However, if the necessary repairs are covered under this Limited Warranty, we will pay
the reasonable return shipping charges to any destination. Please be sure to save the original
shipping carton(s), because a charge will be made for additional cartons. A purchase receipt
is required for Limited Warranty service. Please attach a copy of your purchase receipt to this
statement of Limited Warranty and put it in a safe place.
— 20 —
KUBE SYSTEMS PRODUCTS LIMITED WARRANTY
WHAT IS NOT COVERED
This Limited Warranty covers defects in material and workmanship with the following specified
exceptions: (a) damage resulting from (i) improper or unreasonable use, maintenance or
neglect, (ii) failure to follow operating instructions, (iii) accident, (iv) excess moisture, (v) insects,
(vi) lightning, (vii) power surges, (viii) connections to improper voltage supply, (ix) unauthorized
alteration or modification of original condition, (x) inadequate packing or shipping procedures,
(xi) use with non-Kube Systems products, (xii) modification or adaptation to enable a Kube
Systems product to operate in any particular country, (xiii) service performed by anyone who is
not an authorized representative of Kube Systems, (xiv) fire, flood, earthquake or other external
causes, or (xv) acts of God or force majeure; (b) loss of, damage to or corruption of stored data;
(c) repair of products damaged by any modification or adaptation to enable a Kube Systems
product to operate in any particular country; (d) damage to, or deterioration of, any accessory
or decorative surface; (e) any Kube Systems product on which the serial number has been
effaced, modified or removed; or (f) Kube Systems products purchased from unauthorized
distributors or dealers. This Limited Warranty covers only actual defects within the product itself,
and does not cover the cost of installation or removal from a fixed installation, normal setup
or adjustments, claims based on misrepresentation by the seller or performance variations
resulting from installation-related circumstances.
LIMITATION ON IMPLIED WARRANTIES
KUBE SYSTEMS SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF ANY KUBE SYSTEMS PRODUCT, OR ARISING
OUT OF ANY BREACH OF THIS LIMITED WARRANTY. TO THE EXTENT PERMITTED BY
APPLICABLE LAW, KUBE SYSTEMS DISCLAIMS ANY AND ALL STATUTORY OR IMPLIED
WARRANTIES, WRITTEN OR ORAL, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, NON-INFRINGEMENT
AND WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS. IF KUBE SYSTEMS CANNOT
LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES, THEN TO THE EXTENT
PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED IN DURATION TO THE
DURATION OF THIS LIMITED WARRANTY. THE MAXIMUM LIABILITY OF KUBE SYSTEMS
SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID BY YOU FOR THE PRODUCT.
OTHER LEGAL RIGHTS
This Limited Warranty gives you specific legal rights, and you also may have other rights that
vary from place to place. Some places do not allow limitations on implied warranties or the
exclusion or limitation of incidental or consequential damages, so the above limitations or
exclusions may not apply to you.
PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY ARE
YOUR RESPONSIBILITY.
INFORMATION
If you have questions regarding the installation or operation of this product, please e-mail us at
support@kubesystems.com.
— 21 —
http://www.kubesystems.com
Download PDF