1021 Wireless Digital Congress System2.cdr

System Diagram
DCS-1021 Wireless Congress System
SDI VIDEO
RS-485 To RS-232
Converter
RS-485
SDI to HDMI
Converter
SDI VIDEO
RS-232
SDI INPUT
HDMI
SDI OUTPUT
DCS-1021
GX-SDI0808
RS-232
Wireless Congress System
VGA
M3
M3
RS-232
Main Features
♦ Support 2.4 G / 5.8G dual-band communication to ensure system
stability;
♦ Microphone sensitivity can be adjusted from level 0 to 4;
RS-485
Gonsin10000S
♦ With offline 8 in 1 out SD video tracking matrix, HD camera is
CONTROL COMPUTER
supported;
Audio
♦ Terminals can be uniformly shutdown by server after the conference;
USB
♦ With timing function, when the timing ends, the server can be used
PRINTER
SDI VIDEO
after reauthorization;
VGA
♦ System capacity can be up to 450 units of terminals;
HDMI
GX-HD3300 ID:01
♦ CD-quality sound;
♦ Multiple systems work simultaneously under same environment
TV
GX-HD3300 ID:02
without disturbing each other.
Wireless AP
Next
POWER AMPLIFIER
DCS-1021C-W
DCS-1021D-W
All rights reserved. The information and
specifications included are subject to
change without prior notice.
GONSIN CONFERENCE EQUIPMENT CO.,LTD.
www.gonsin.com
06
01
Wireless Congress System
DCS-1021-W
Wireless Congress Terminal
GONSIN10000S
CHG-10A
Congress Server
Charging Cabinet
Technical Specifications
Features
Features
Functions
♦ Support 2.4 G/ 5.8G dual-band communication;
♦ Congress terminals use dot matrix LCD to
♦ CD-quality sound;
♦ Terminal battery duration (speaking state)
Capacity
display the microphone switch status,
Signal to noise ratio
≥75dB
network connecting status, ID number and
Distortion Degree
≤0.5% (50HZ~8KHZ)
System stability
communication distance
LCD panel
achieve long press on / off;
♦ Pluggable MIC stem;
♦ Attendance registration: by key press or
♦ Metal material, high texture;
supplementary registration;
♦ Microphone sensitivity can be adjusted from
30m
128x64 dot matrix
AC110~220V±10% 50~60Hz
Audio Output
+20dBu
1x 8pin(to connect interpreter console)
2x audio output
Ports
♦ Low voltage warning and automatic shutdown
1x RJ-45 (to connect a wireless AP / PC)
1x RS-232( to connect camera tracking switcher)
protection function;
1x RS-485 ( to connect camera)
♦ Multiple systems work simultaneously without
Mounting
disturbing each other via SSID network setting;
♦ Two microphone modes: AUTO / FIFO;
♦ Removable lithium batteries for centralized charging.
♦ Charging contacts are designed to prevent wrong-way
insertion
Main supply
♦ With battery detection function;
level 0 to 4.
♦ Green/Red LED indicator lights for charging status
30Hz~20KHz
♦ Multiplexing switch microphone button to
♦ Highly resistant to mobile phone interference
♦ Real time management of battery and charging current
Frequency response
battery level information and so on;
≥ 14 hours;
Single wireless AP:150 Terminals ; can be extended
to 450 terminals with extra wireless AP
Features
♦ The congress server platform is based on Linux operating system, applicable for any
19" standard cabinet
Dimensions ( W×H×D)
485mm×90mm×325mm
Weight
7.2Kg
Operating temperature
0~45℃
Storage temperature
-20~50℃
Function Indicators
①
②
Functions
♦ Real time management of battery and charging current,
large convention center requiring strict working conditions;
extending battery lifetime ;
♦ Fully digital technology for audio signal processing and transmission, which complies
③
④
♦ With an independent modular design for the charging
with the IEC 60914 international standards for conference systems;
circuit, the battery can detect automatic;without inserting
♦ High performance DSP solution optimized for digital audio processing;
the batteries, charging module will not work ;
♦ Unified Server Shutdown function.
⑤
♦ Smart charger for 10 Li-ion battery packs,with 6-hour
charging time ;
Technical Specifications
Communication mode
2.4 G / 5.8G dual band
Frequency response
30Hz~22KHz
Sensitivity
-46dB±1dB
♦ Each server has a globally unique ID number ,which is easy for installation and orderly management;
♦ Supports 8 x 1 SD / 8 x 8 HD automatic camera tracking function;
128 x 64 LCD
♦ Two microphone modes: AUTO / FIFO;
backlit with white-on-blue
♦ Up to 4 microphones can be active simultaneously (1 chairman terminal +1/2/3 delegate terminal);
Working Voltage
11.1V
♦ The server comes with an LCD panel and navigation buttons, which are for all function setup operation;
Main supply
AC100~240V,50~60Hz
Battery capacity
3000mAH
♦ Terminal ID number can be wrote through the server, more convenient for device management;
Power
150W
Battery life
≥14 hours (speaking state)
Charging time
6 hours
Earphone port
3.5mm jack, MIC×2,REC×2
Weight
6.7Kg(net weight)/8.7 Kg(ful load)
MIC stem length
310mm (Optional 410mm/510mm)
Dimensions
415×344×87mm
Dimensions
212mm×139mm×67mm
Operating temperature
0~45℃
0.8Kg
Storage temperature
-20~50℃
Dot matrix
Weight
02
♦ Green/Red LED indicator lights for charging status.
Functions
Operating temperature
0~45℃
Storage temperature
-20~50℃
Technical Specifications
♦ Unified terminals shutdown function hens effectively reduce the work;
♦ Sound pickup sensitivity of the terminals can be adjusted individually or collectively via the server;
1.Power switch
2.Power port(AC 110-220V 50Hz)
3.Charging Grid,to charge the battery by inserting
the metal side of it into the grid
4.Charging indicator light, when not fully charged,
the red indicator light is on
5.Charging indicator light, when fully charged, the
green indicator light is on
03
04
05
Download PDF