Nivelco products - Intech NZ Catalogue 2017

Level transmitters
JUMO
www.intech.co.nz/4390
JUMO Maera (4390 Series)
Level probe for liquids - Critical Applications.
MODEL
Features:
i Two wire 4~20mA submersible
transmitter.
i
i
i
High accuracy < 0.5%.
i
Integrated OVP (lightning)
protection (4392).
DESCRIPTION
PRICE
Level transmitter (4392 stats).
Housing:
225mm x ø25mm, stainless steel.
Protection:
IP68. EN60529 to 400m.
Cable:
polyurethane Ø 9mm.
Accuracy:
on full scale, < 0.5% min @ 20°C.
Operating temp:
0~50°C.
Temp coefficient:
±0.2% / 10°C.
Output:
4~20mA, 2 wire, loop powered.
UT = 10~30Vdc.
Load resistance:
max. RL < (US-10V) / 0.02A.
JUMO Datasheet:
40.4392 | 40.4391 | 40.4390
3x Overpressure - up to 40 bar.
Surge and Reverse polarity
protection.
Standard ranges:
404391
404391-022
404392-451
404392-452
404392-453
404392-454
404392-456
404392-457
404392-458
with 10 metres of cable.
0~1 metre H2O,
0~2.5 metres H2O,
with 10 metres of cable.
0~4 metres H2O,
with 10 metres of cable.
0~6 metres H2O,
with 10 metres of cable.
0~10 metres H2O,
with 15 metres of cable.
0~25 metres H2O,
with 30 metres of cable.
0~40 metres H2O,
with 50 metres of cable.
0~60 metres H2O,
with 65 metres of cable.
Other ranges and cable lengths are available on request.
$1415.00
$1030.00
$1030.00
$1030.00
$1125.00
$1390.00
$2190.00
$2450.00
404392
Note: A close proximity or direct
lightning strike may compromise
the OVP protection.
Common Accessories for Level transmitters.
MODEL
DESCRIPTION
PRICE
NAA-101
Terminal Box with filter.
Protection:
IP65.
Size:
93 x 93mm.
$70.00
NAA-102
Terminal Box with filter and integral OVP.
Protection:
IP65.
Size:
93 x 93mm.
Overvoltage protection:
Voltage clipping:
slow - 90 Vpp, fast - 33 Vpp.
Line resistance:
13 ohm.
Max rating:
600 W / 1ms.
$265.00
NAA-209
Hanging Cable Clamp.
$30.00
LPN-OVP
(Rev 1)
DIN Rail mount OVP unit. www.intech.co.nz/lpn-ovp
Leakage Current:
10ȝA @ 24Vdc.
Transient cut-off voltage:
33V.
Added line resistance:
4 ohms for the loop.
$115.00
NAA-101/2
NAA-209
LPN-OVP (Rev 1)
www.intech.co.nz/lmk306
BD Sensors
Level probe for liquids - Small Diameter.
MODEL
LMK 306
DESCRIPTION
with 60 metres of cable.
LMK-306-50 0~50 metres H2O,
with 110 metres of cable.
LMK-306-100 0~100 metres H2O,
Other ranges and cable lengths are available on request.
62
PRICE
Stainless Steel Submersible Level Transmitter.
Housing:
132mm x ø17mm, stainless steel.
Protection:
IP68.
Cable:
polyurethane Ø7.4mm.
Accuracy:
on full scale, ”±0.5%.
Operating temp:
-10~70°C.
Temp drift:
”±0.2% / 10°C.
Output:
4~20mA, 2 wire, loop powered.
VS = 12~36Vdc.
Load resistance:
Rmax. = [(VS - VS min) / 0.02] ȍ.
$2195.00
$2910.00
All prices are in NZ$, are GST exclusive and are subject to change without notice.
INTECH INSTRUMENTS
Level transmitters
IN-LLT (Rev 1)
Cost Effective.
Submersible Level Transmitter for Water applications.
DESCRIPTION
IN-LLT-
Submersible Level transmitter.
Housing:
92mm x ø26mm, stainless steel.
Protection:
IP68.
Cable:
polyethylene Ø9mm.
Accuracy:
on full scale, 0.5%.
Operating temp: -10~80°C.
Temp coefficient: ±0.2% / 10°C.
Output options:
4~20mA, 2 wire, loop powered. UT = 12~28Vdc.
0~5Vdc. 10~30Vdc power supply.
Load resistance: <(UT-12)/0.02.
CV-
1
5
10
20
50
100
150
200
Standard ranges:
with 10 metres of cable.
0~1 metre H2O,
0~5 metres H2O, with 10 metres of cable.
0~10 metres H2O, with 15 metres of cable.
0~20 metres H2O, with 30 metres of cable.
0~50 metres H2O, with 60 metres of cable.
0~100 metres H2O, with 110 metres of cable.
0~150 metres H2O, with 160 metres of cable.
0~200 metres H2O, with 210 metres of cable.
Other ranges and cable lengths are available on request.
Nivopress NPK
Features:
i Hydrostatic level transmitter.
$680.00
$680.00
$700.00
$760.00
$880.00
$1080.00
POA
POA
POA
i
i
DESCRIPTION
Level transmitter.
Housing:
Protection:
Cable:
Accuracy:
Operating temp:
Temp coefficient:
Output:
Load resistance:
For Overvoltage (Lightning) protection with the
IN-LLT (Rev 1) please see previous page (62) <<
PRICE
Stainless Diaphragm.
145mm x ø22mm, stainless steel.
IP68.
polyurethane Ø7mm.
on full scale, <0.5%.
-10~60°C.
±0.05% / 10°C.
4~20mA, 2 wire, loop powered.
UT = 12~30Vdc.
HART programmable.
max. RL = (UT-12V) / 0.02A.
Common Features:
i Two wire 4~20mA submersible transmitter.
i
i
Standard ranges (programmable):
Re-range down to:
0~1 metre H2O,
with 3 metres of cable.
0.5m
0~2 metres H2O, with 5 metres of cable.
0~1m
0~5 metres H2O, with 10 metres of cable.
0~2.5m
0~5m
0~10 metres H2O, with 15 metres of cable.
Other ranges and cable lengths are available on request.
$850.00
$870.00
$900.00
$930.00
Options
NAW-104
Extra cable.
Adaptor for NPK Wastewater usage.
Atex Ex.
$9/m
$78.00
POA
DESCRIPTION
Level transmitter.
Housing:
Protection:
Cable:
Accuracy:
Operating temp:
Temp coefficient:
Output:
Load resistance:
NCK-22-05
NCK-23-10
NCK-24-15
High accuracy <0.5%.
Reverse polarity protection.
Level probe for liquids - Viscous Sewage/Slurry.
MODEL
NCK-2
Overpressure 2x FS.
www.intech.co.nz/in-llt
NPK-41-03
NPK-42-05
NPK-43-10
NPK-44-15
Nivopress NCK
High accuracy 0.5% FS.
Level probe for liquids - General Purpose.
MODEL
NPK-4
PRICE
NIVELCO
MODEL
PRICE
Ceramic Diaphragm.
145mm x ø40mm, stainless steel.
IP68.
polyurethane Ø7mm.
on full scale, <0.5%.
0~60°C.
±0.05% / 10°C.
4~20mA, 2 wire, loop powered.
UT = 12~30Vdc.
max. RL = (UT-12V) / 0.02A.
Standard ranges (fixed):
0~2 metres H2O, with 5 metres of cable.
0~5 metres H2O, with 10 metres of cable.
0~10 metres H2O, with 15 metres of cable.
All prices are in NZ$, are GST exclusive and are subject to change without notice.
NCK
NPK
www.intech.co.nz/npk
$1100.00
$1100.00
$1100.00
For Overvoltage (Lightning) protection
with the Nivopress NPK / NCK please
see previous page (62) <<
63
Indicators
NIVELCO
Unicont
Field mounting indicator. Loop powered.
MODEL
DESCRIPTION
PRICE
PDF-401
Field mounting indicator. Loop powered.
Mount:
Wall mount.
Temperature:
-25~60°C.
Housing:
Paint coated aluminium.
Display:
6 digit LCD, engineering units and bar graph.
Power:
2 wire, 4~20mA.
Option, 4 wire, 4~20mA/HART.
Protection:
IP67.
$710.00
PDF-401
Ex marking
PDF-501
Field mounting indicator. Ex version.
Specifications as above.
Ex 112GEExia11CT6 / Ex 11GEExd11BT6.
Housing Option: reinforced plastic.
Not available in Ex version.
POA
$670.00
FINETEK
LR1011
Plug in Display. Loop powered.
MODEL
LR1011
LR1011 shown with
JUMO P30-504 Pressure
Transmitter - see page 60.
DESCRIPTION
Plug in Display. Loop powered.
Input:
4~20mA, 2 wire.
Display:
4-digit: 7.6mm height.
Housing:
Plastic.
Protection:
IP65.
PRICE
$250.00
INTECH INSTRUMENTS
LPI-LCD-5
Panel Mount Indicator. Loop powered.
MODEL
DESCRIPTION
LPI-LCD-5 Panel mount. Loop powered.
Input:
4~20mA, 2 wire.
Display:
5-digit LCD of 12.5mm height.
Volts Drop:
3.9V @ 20mA.
Scaling:
Programmable between -19999 to 30000.
Max Resolution: 50,000 counts.
Accuracy:
+/-0.02% of reading plus 2 digits.
Decimal Point:
Programmable to six positions.
Temperature:
-10°C to +50°C.
Protection:
IP65.
Housing:
Plastic. 96 x 48mm.
www.intech.co.nz/lpi-lcd
NIVELCO
74
PDF
PRICE
$366.00
Unicont
PKK
Multifunction limit switch.
MODEL
DESCRIPTION
PRICE
PKK-312-1 Loop current monitoring relay and digital isolator.
Mount:
DIN rail.
Operating modes:
Limit switch,
(selectable)
Differential switch,
Window switch.
Supply voltage:
230Vac. LV option available, see below.
Input:
1~22mA & dry contact.
Output:
Relay, 8 amps, 250Vac.
Transmitter Power Supply: 30v, Imax = 70mA.
$275.00
PKK-312-4 LV Supply voltage:
Transmitter Power Supply:
$345.00
www.nivelco.com
24Vac/dc.
24v, Imax = 80mA.
All prices are in NZ$, are GST exclusive and are subject to change without notice.
NIVELCO
Level switches
Nivopoint MRC-203 Series. Magnetic Float Switch.
Applications:
i Multipoint level switching.
i For controlling pumps, valves.
i Level detection of aggressive liquids.
i Level switching of explosive liquids.
MODEL
DESCRIPTION
W
NE
!
PRICE
MRC-104-3
Magnetic float level switch with reed relays.
Wetted parts:
Stainless steel.
Mount:
2”BSP.
Protection:
IP65.
Pressure:
25 bar.
Medium temp:
-40~150°C.
Ambient temp:
-40~100°C.
Insertion length: 0.3m.
Switching points: 1 switch NO/NC.
Switch rating:
250Vac, 3A / reed relay, max. 9.
$460.00
MRC-203-3
As above but with 2 switches and 0.3m insertion length.
$475.00
MRC-204-3
As above but with 2 switches and 0.4m insertion length.
$495.00
Ex version.
POA
Other models available (Different lengths and switching points).
POA
All prices are in NZ$, are GST exclusive and are subject to change without notice.
www.nivelco.com
75
Level switches
NIVELCO
Rubber protection sleeve
MKG-210, MKS-210.
Square flange
MKA-210-0
Nivomag MKA-210 Series. Llyod (GL) certified.
Fixed differential level switch.
MODEL
Two inch BSP mount
MKA-21B
DESCRIPTION
PRICE
$575.00
MKA-210-0 Magnetic float level switch with fixed differential.
Stainless steel.
Side mount. Wetted parts:
Mount:
Square flange.
Protection:
IP65.
Pressure:
25 bar.
Liquid density:
Min. 0.7 SG
Ambient temp:
-20~80°C.
Liquid temp:
-20~250°C.
Switch rating:
Microswitch.
Flanged mount
MKA-211
10A, 250Vac12. 0.6A, 220Vdc13.
Protrusion length: 202mm.
(other lengths available, refer below).
Options
Add Price
With 2” BSP process connection.
Submersible
MKU-210
10m cable
MKA-21B-0.
N/C
With rubber protection sleeve. (Medium 0~100°C).
$110.00
With silicone protection sleeve. (Medium 0~200°C).
$145.00
Flange mount. Screwed.
MKA-211.
POA
With protrusion length. Several lengths available.
POA
With “L” or “Z” profile.
MKA-210-4L/Z.
$90.00
Underwater IP68.
MKU-210.
$298.00
Ex version.
POA
E
Cen x versio
Ex ap elec, Ger n availab
m
le
prov
al: E anischer
Ex dm
L
e IIC loyd.
T4...T
6.
Side mounted, Z arm.
MKA-210-4Z
Top mounted, L arm.
MKA-210-4L
MODEL SELECTION:
MK-21 MK-22 MK-23
Fixed differential.
¥
Adjustable differential.
Specific gravity of liquids:
Petrol
0.700
Kerosene
0.800
Olive oil
0.920
Water
1.000
Sea water
1.025
Milk
1.030
Sulfuric acid
1.140
Glycerine
1.260
Mercury
13.595
76
MINIMUM LIQUID DENSITY (kg/dm³) S.G.:
Straight arm.
¥
L or Z arm.
¥
Side mount.
¥
Float diameter.
100mm
200mm
300mm
1m ~ 3m
Top mount.
¥
52mm
0.7
0.8
0.85
-
Submersible.
¥
64mm
0.7
0.8
0.8
-
Rubber protection sleeve.
¥
120mm
-
-
-
0.7
Flanged process connection.
¥
Threaded process connection.
¥
Ex version.
Tester.
Arm length
www.nivelco.com
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
¥
All prices are in NZ$, are GST exclusive and are subject to change without notice.
MODEL
MKA-220-0
Side mount.
DESCRIPTION
Magnetic float level switch with adjustable differential.
Wetted parts:
Stainless steel.
Mount:
Square flange.
Protection:
IP65.
Pressure:
25 bar.
Liquid density:
Min. 0.7 SG
Ambient temp:
-20~80°C.
Liquid temp:
-20~250°C.
Switch rating:
Microswitch.
NIVELCO
Level switches
Nivomag MKA-220 Series. Llyod (GL) certified.
Adjustable differential level switch.
PRICE
$778.00
Switch differential between high and low
switch set points can be changed by
changing the positions of the two pins.
Side mount.
10A, 250Vac12. 0.6A, 220Vdc13.
Protrusion length: 268mm (other lengths available, refer below).
Options
Adjustable switch differential
MKA-220.
Add Price
With rubber protection sleeve. (Medium 0~100°C)
$110.00
With silicone protection sleeve. (Medium 0~200°C)
$145.00
Flange mount.
POA
With protrusion length. Several lengths available.
POA
Underwater IP68.
$298.00
Ex version.
Ex v
C
Ex a enelec, ersion
a
G
ppr
ova erman vailabl
l: E
Ex d ischer e
L
me
IIC loyd.
T4..
. T 6.
POA
Nivomag MKA-230 Series.
Adjustable differential level switch.
MODEL
MKA-230-1
Top mount.
DESCRIPTION
Magnetic float level switch with adjustable differential.
Wetted parts:
Stainless steel.
Mount:
Square flange.
Protection:
IP65.
Pressure:
16 bar.
Liquid density:
Min. 0.7 SG
Ambient temp:
-20~80°C.
Liquid temp:
-20~250°C.
Switch rating:
Microswitch.
PRICE
Top mount.
$885.00
10A, 250Vac12. 0.6A, 220Vdc13.
Protrusion length: 1265mm (other lengths available, refer below).
Differential:
1000mm max.
Options
Add Price
With longer protrusion length.
2265mm protrusion. 2000mm max. differential.
3265mm protrusion. 3000mm max. differential.
$60.00
$115.00
Flange mount.
POA
Ex version.
POA
Switch differential can be adjusted by
moving the rings on the rod.
The weight of different rod lengths is
compensated for by adjusting the
counter weight.
Nivomag MMK Tester & Nivomag MFF Counter flange.
MODEL
DESCRIPTION
PRICE
MMK-110
MMK-120
Tester for magnetic float level switches. Requires tester flange.
Steel Test Plunger.
Stainless Steel Test Plunger.
$238.00
$355.00
MFF-110
MFF-111
MFF-120
MFF-121
Counter flange for magnetic float level switches.
Steel Flange.
Steel Tester Flange.
Stainless Steel Flange.
Stainless Steel Tester Flange.
$133.00
$144.00
$168.00
$179.00
Counter flange
MFF-110/120
MMK Tester
Shown fitted between a
MKA switch and counter flange.
Counter flange for tester
MFF-120/121
The tester is mounted between the switch
body and the counter weight.
Pressing the plunger pushes the arm counter
weight which activates the switch.
Operation of the switch can be checked
without any filling or emptying procedures.
All prices are in NZ$, are GST exclusive and are subject to change without notice.
www.nivelco.com
77
Level switches
NIVELCO
The Nivoswitch vibrating forks are applicable for level or flow switching of
normal and explosive liquids.
FOR
LIQ
U
Nivoswitch RCM/RCR Series.
Vibrating fork level switch.
For liquids.
MODEL
DESCRIPTION
IDS
PRICE
Vibrating fork level switch.
Most liquids with a maximum viscosity of 10,000 mm2/s (centistokes).
Mount:
1“ BSP = RCM.
Wetted parts:
316 stainless steel.
Liquid density:
• 0.7kg/dm³.
Ambient temp:
-40~70°C.
Medium temp:
-40~130°C @ ambient of -40~55°C.
-40~95°C @ ambient of -40~70°C.
Pressure:
Max, 40 bar @ -40~100°C.
25 bar @ -40~130°C.
RCM-400-1
RCM-400-1
RCM-400-3
Shorty version.
Type 1 Output:
Type 3 Output:
Probe length: 69mm stainless steel.
2 wire ac, 20~255Vac, 50/60 Hz. Connector Plug.
(NPN/PNP selectable). 3 wire dc, 12~55Vdc, 350 mA.
with plug in connector. (IP65).
$292.00
$292.00
RCM-401-1
RCM-401-2
RCM-401-3
Standard version.
Type 1 Output:
Type 2 Output:
Type 3 Output:
Probe length: 125mm stainless steel.
2 wire ac, 20~255Vac, 50/60 Hz. Connector Plug.
2 wire ac, 20~255Vac, 50/60 Hz. 3m Integral Cable.
(NPN/PNP selectable). 3 wire dc, 12~55Vdc, 350 mA.
with plug in connector. (IP65).
$324.00
$382.00
$324.00
Extended probe:
Probe length:
Available on request.
From a min of 0.2m, to a max of 3m stainless steel.
RCM-402-1
RCM-401-1
Options
POA
Add Price
Cable integral to probe. (IP68).
Cable length = 3m.
Triclamp 2 inch sanitary probe = RCR.
POA
$106.00
Highly polished probe = RGx.
For more hygienic applications.
POA
Plastic PFA coated probe = RAx.
POA
Ex version,
POA
Special version of R-400 to be used only with the
Nivoswitch JDT remote switching unit.
RFM Series. Cast aluminium housing. IP67.
Power supply: Universal, 20~255Vac / 20~60Vdc.
Output: SPDT relay. 250Vac, 8 amps, ac1.
PRICE
RFM-400-0
Shorty version.
Probe length:
69mm stainless steel.
$550.00
RFM-401-0
Standard version.
Probe length:
125mm stainless steel.
$565.00
RFM-402-0
Extended probe:
Probe length:
Available on request.
From a min of 0.2m, to a max of 3m stainless steel.
Options
Options
POA
Add Price
Plastic housing, in lieu of aluminium. R-500.
N/C
Stainless steel flange, DN50.
$490.00
Second relay output.
$58.00
ECTFE coated probe for
aggressive or sticky medium
also available - contact Intech.
RCM-401-2
With integral cable
IP68
Connector Plug IP65
3m Cable IP68
Process connection
-1 = AC
-2 = AC
RCM = 1” BSP
-3 = DC
-4 = DC
RCR = 2” Tri-clamp
78
www.nivelco.com
RFM-400-0
All prices are in NZ$, are GST exclusive and are subject to change without notice.
FOR
Nivoswitch R Solids Series.
Vibrating fork level switch.
For powders and granules.
MODEL
DESCRIPTION
Vibrating fork level switch.
Most powders and granules.
Housing:
Protection:
Wetted parts:
Minimum medium density:
Ambient temp:
Medium temp:
Pressure:
SOL
IDS
PRICE
Steel.
IP67.
316 stainless steel.
• 0.01kg/dm³.
-40~70°C.
-40~130°C @ ambient of -30~55°C.
-40~95°C @ ambient of -30~70°C.
Max, 40 bar @ -40~100°C.
25 bar @ -40~130°C.
RLH-301-3
RLH-301-3
Mount:
Probe length:
Type 3 Output:
1½” BSP.
137mm stainless steel.
(NPN/PNP selectable). 3 wire dc, 12~55Vdc, 350 mA.
with plug in connector. (IP65).
$450.00
RCM-301-3
Mount:
Probe length:
Type 3 Output:
1” BSP.
125mm stainless steel.
(NPN/PNP selectable). 3 wire dc, 12~55Vdc, 350 mA.
with plug in connector. (IP65).
$450.00
RCM-301-4
Mount:
Probe length:
Type 4 Output:
1” BSP.
125mm stainless steel.
(NPN/PNP selectable). 3 wire dc, 12~55Vdc, 350 mA.
with cable. (IP68).
$495.00
RRH-301-B-Ex Mount:
Probe length:
Power supply:
Output:
NIVELCO
Level switches
1½” BSP.
137mm stainless steel.
12~55Vdc.
SPDT relay. 250Vac, 8 amps, ac1. Ex.
$790.00
RRH-301-B-Ex
Nivofloat NLP/NLN Series.
Float level switch.
For liquids.
MODEL
DESCRIPTION
PRICE
Applications:
i Drinking water reservoirs.
i Sewage tanks.
i Pump protection.
i Holding tanks.
Float level switch with adjustable differential.
Minimum density of 0.8 g/cm3 (S.G.).
Temperature:
-20~80°C.
Pressure:
5 bar.
Liquid density:
Min 0.8 SG
Protection:
IP68.
Wetted parts:
non toxic polypropylene.
Switch angle:
±45°
Output:
SPDT micro-switch, 8 amp 230Vac.
PVC cable:
5 metres ………
10 metres ………
20 metres … …...
NLP-105
NLP-110
NLP-120
$68.00
$95.00
$145.00
Neoprene cable:
NLN-105
NLN-110
NLN-120
5 metres ………
10 metres ………
20 metres … …...
All prices are in NZ$, are GST exclusive and are subject to change without notice.
$95.00
$145.00
$235.00
www.intech.co.nz/nivofloat
Features:
i Mercury free switch.
i Low specific weight of floating body.
i Hermetically moulded, double chamber.
i Switching differential can be set by
adjusting the counter weight along the
cable.
www.nivelco.com
79
Level switches
NIVELCO
Nivocont RKH Series.
Vibrating rod level switch.
For free flowing granules and powders.
MODEL
DESCRIPTION
PRICE
Vibrating rod level switch with adjustable sensitivity.
Minimum density of 0.05 kg/dm3 (S.G.).
Max granular size: 10mm.
Housing:
Plastic.
Protection:
IP67.
Mount:
1.5” BSP.
Wetted parts:
316 stainless steel.
Ambient temp:
-30~60°C.
Medium temp:
-30~110°C @ ambient of -30~50°C.
-30~75°C @ ambient of -30~60°C.
Pressure:
max. 25 bar (absolute).
Power supply:
85~265Vac (50/60Hz), / 120~375Vdc.
Output:
SPDT relay, 8 amp 250Vac1.
$750.00
RKH-502 Standard version.
Probe length:
235mm.
RKR-505 Pipe extended probe. From a min of 0.5m, to a max of 3m.
Probe length:
0.5m.
For each extra 100mm over 0.5m:
add……..
RKK-501 Cable extended probe. From a min of 1m, to a max of 20m.
Probe length:
1m.
For each extra metre over 1m:
add……..
Medium temp:
-25~90°C @ ambient of -30~35°C.
-25~75°C @ ambient of -30~60°C.
Pressure:
max. 6 bar. (Absolute).
Power Supply
-1
85~265Vac
120~375Vdc
-2
16~40Vac
19~55Vdc
RKH-602 Cast aluminium housing, instead of Plastic.
$950.00
$35.00
$1080.00
$24.00
$750.00
Options
Add Price
High temperature. (not RKK)
Medium temp:
-30~160°C @ ambient of -30~35°C.
$110.00
Power supply of:
16~40Vac (50/60Hz), / 19~55Vdc.
N/C
Solid state output:
SPST, ac/dc 350mA / 50V.
N/C
ABS reinforced plastic housing, in lieu of alu-cast.
N/C
Fast response.
POA
Remote mounting electronics.
POA
Ex version.
Not Plastic housing.
Ex ll D I T6 IP67 (Zone 20).
$435.00
Typical applications.
Plastic processing.
powders, pellets, granulates.
Chemical industries.
pills, powders, crystals.
Agriculture/food industries.
grains, rice, cereals, feed, flour.
Pulp and paper industries.
crushed cellulose, shavings.
Recycling.
paper cuts, ground plastic.
Energy generation.
fly ash, lime, carbon black.
Mining and quarry.
coal, stone powder.
Construction.
cement, sand, clay.
Density
Material
lb/cu.ft
S.G.
Material
lb/cu.ft
S.G.
Alumina, fine
35
0.56
Grape pomace
18
0.29
Alumina, briquette
65
1.04
Grass seed
21
0.34
Ashes, dry
40
0.64
Lactose
32
0.51
Barley
42
0.67
Lime, ground
45
0.72
Blood, dried
40
0.64
Malt, dry, ground
22
0.35
Caustic soda
88
1.41
Meat meal
37
0.59
Cement
95
1.52
Milk, powdered
20
0.32
Clay, fine dry
110
1.76
Oats, rolled
22
0.35
Clay, fire, powdered
52
0.83
Oyster shells, ground
53
0.85
Coal, ground
40
0.64
Peas, dry
48
0.77
Coal, pulverized
34
0.54
Sand, foundry
95
1.52
Feed pellets
38
0.61
Sulphur, powdered
55
0.88
Fish meal
35
0.56
Wheat
48
0.77
Flour
38
0.61
Yeast, dried
41
0.66
Figures are indicative only.
80
www.nivelco.com
All prices are in NZ$, are GST exclusive and are subject to change without notice.
MODEL
KRK-512-5
KRK-522
DESCRIPTION
NIVELCO
Level switches
Nivocont KRK Series.
Conductive level switches.
PRICE
Conductivity liquid level single control relay.
Differential or limit switch with adjustable sensitivity and delay.
DIN rail mount.
Relay output:
1x SPDT. 16 amp 250Vac.
Power supply:
Universal 24~240Vac/dc.
Minimum conductivity:
20 μS/cm (microSeimen).
1 microSeimen = 1 micromho.
Conductivity liquid level dual control relay.
Differential or limit switch with adjustable sensitivity and delay.
DIN rail mount.
Relay outputs:
2x SPDT. 16 amp 250Vac.
Power supply:
230Vac, optional 24Vac/dc.
Minimum conductivity:
20 μS/cm (microSeimen).
1 microSeimen = 1 micromho.
$125.00
KRK-512-5
$160.00
Probe holders and accessories.
KSP-201
KSS-201
KSN-201
Single probe holders for level electrode.
Process connection:
3/8” BSP.
Single probe holder:
P/P.
Single probe holder:
Steel/PFA.
Single probe holder:
Stainless Steel/PFA.
$42.00
$58.00
$78.00
KSH-302
KSH-303
KSH-304
Probe holders for level electrodes. Plastic.
Process connection:
1.5” BSP.
Two probes plus reference electrode.
Three probes plus reference electrode.
Four probes plus reference electrode.
$175.00
$226.00
$281.00
KSK-201
Submersible single probe. (Probe hangs on the cable).
Stainless steel electrode in an ABS enclosure.
$28.00
KLN-210
Stainless steel electrode with M6 thread for KS holders.
1m length. Other lengths by request.
$25.00
KLP-204
Probe separator for level electrodes.
Four way separator.
$5.00
KRK-522
KSH-303
KSP-201
KSK-201
KLP-204
Nivocont KKH Series.
Compact conductive level switch (replaces KKH-102).
MODEL
DESCRIPTION
PRICE
Compact conductive liquid level switch.
Suitable for using with 1 or 2 KRK-512 level control switches.
Mount:
1½” BSP.
Housing:
Plastic.
Relay outputs:
1x or 2x SPDT 16 amp 250Vac1.
Power:
230Vac, optional 24Vac/dc.
Minimum conductivity:
10 μS/cm (microSeimen).
1 microSeimen = 1 micromho.
KKH-212
3 probes.
$275.00
KKH-222
5 probes.
$385.00
Stainless electrodes added price.
Two independent pump controls.
or
Two independent alarm levels.
or
Pump control with alarm.
All prices are in NZ$, are GST exclusive and are subject to change without notice.
POA
No wiring of a separate electronic unit.
Selectable high or low fail safe.
Adjustable sensitivity.
Pressure 1 bar.
Protection IP67.
www.nivelco.com
81
Radar transmitter
NIVELCO
82
www.nivelco.com
All prices are in NZ$, are GST exclusive and are subject to change without notice.
Industry Segments:
i Water, Wastewater.
i Power.
i Food and Beverage.
i Pharmaceutical.
i Chemical.
NIVELCO
Radar transmitter
N
fo o t a
a m ff e
an cte
d db
ag y
i ta
tio
n!
Applications:
PiloTREK W
Non Contact Radar.
For Liquids.
MODEL
i Liquids and slurries in general.
DESCRIPTION
PRICE
2 Wire 24 GHz K-band RADAR.
Easy installation due to narrow Antennas.
24M measuring range for liquids and slurries.
±3mm accuracy.
Plug in graphical module.
Er > 1.9.
Not affected by steam, vacuum or vapors (some range
reduction may be required).
Easy to set up.
WEP-140
Radar transmitter with PP housing 40mm horn.
WEP-14T
Radar transmitter with 2” tri clamp.
SAP-300
Programming module/indicator, custom made.
Integral, lug-in LCD 6 digit display, bar graph and icons.
Scalable in engineering units.
$2370.00
Protected enclosed
Antenna
POA
$164.00
Other models available - contact Intech.
er
w
ns !
a
te evel
a
i m id l
t
l
e u liqu
h
T fo r
Standard 40mm model
Hygienic Hi-temp model
Suitable for milk
All prices are in NZ$, are GST exclusive and are subject to change without notice.
www.nivelco.com
83
Microwave level transmitters
NIVELCO
MicroTREK
Guided Microwave Level Transmitters
General Description
The MicroTREK guided microwave level transmitter is designed for continuous level measuring of conductive or nonconductive
liquids, pulps and solids. MicroTREK level gauge operates based on the well known TDR (Time Domain Reflectometry) principle.
Micropulses are sent along a probe guide at the speed of light. As soon as the pulse reaches the surface of the medium, it is reflected
back to the electronic module. Level distance is directly proportional to the flight time of the pulse. The reflected signal is dependent
on the dielectric constant of the material, the feasibility of the measurement is İr > 1.4. The TDR technology is unaffected by the
properties of the medium as well as that of the space above it. Measurement is also unaffected by the change in the physical
properties of the materials such as temperature, pressure, dielectric constant.
Main Features
i Measuring range up to 24 m
i Accuracy: ±5 mm
i Measurement is independent
i
i
i
i
i
i
i
i
of dielectric constant, temperature,
pressure and density variations
Rod, cable and coaxial probes
Minimum 1.4 • İr
2-wire version
Graphic display
4~20mA + HART output
Medium temperature range:
-30 °C…+200 °C (-22 °F…+392 °F)
Maximum process pressure: 40 bar (580 psig)
IP 65 Protection
Certifications
ATEX II 1G Ex ia IIC T6...T3
ATEX II 1G Ex ia IIB T6...T3
ATEX II 1D ia D A20/A21 IP65 T1 100ºC
APPLICATIONS
Mono Cable / Mono Rod
Twin Cable
Twin Road
Coaxial Pipe
i Cement, limestone, fly ash,
i Tank parks with solvents,
i Plastic granule vessels
i Coated tanks
i Clean and contaminated
i
i
i
i
i
i
i
i
i
i
i
alumina, carbon black
All high-viscosity liquids
Mineral powders, free
flowing solids
Clean and contaminated
liquids
For stilling wells
(calibration required)
Aggressive mediums with
coated probes
Slightly conductive foams
High temperature
applications
i
i
i
i
i
i
i
i
oil or fuels
Water storage tanks
Plastic granules
For products with low
dielectric constant
(İr > 1.8)
Light granules
Where minimum dead-zone
is needed
For narrow tanks
For solids with low dielectric
constants (İr>1.8)
Mounting close to tank
wall is possible
liquids
i Fine powders
i Where minimum dead-zone i
is needed
i For narrow tanks
i For mediums with low
dielectric constants and
slightly moving products
i
i
i
i
84
www.nivelco.com
Small vessels or tanks
Solvents, liquefied gases
LPG, LNG
For Clean liquids with low
dielectric constant
Agitated or flowing liquids
-the probe acts as a stilling
well
Liquid or vapour spray near
the probe
High temperature
applications - probe can be
heated
Contact possible with
metallic object or tank wall
without measurement
uncertainty.
Bypass applications
All prices are in NZ$, are GST exclusive and are subject to change without notice.
NIVELCO
Microwave level transmitters
Microtek H 400 / H 500
Guided Microwave Level Transmitters.
MODEL
DESCRIPTION
PRICE
2-wire TDR level transmitter for liquids and free-flowing solids
with stainless steel probe with or without plastic coating.
Measuring range up to 24 m .
Output: 4~20 mA with HART.
(HART configuration software is provided free of charge).
Accuracy for liquids:
±5 mm for L < 15 m (±5 mm ±0.05% for L • 15m).
Accuracy for powder and bulk solids:
±20 mm for L < 15 m (±20 mm ±0.05% for L • 15m).
Power supply: 18~35Vdc
Pressure rating: 40 bar (may be restricted by the pressure rating of
the used flange).
Enclosure of the electronics: IP65 / NEMA 4.
Sealing: FPM as standard (EPDM or FFKM available on request).
HTR-510
HTR-520
HTT-520
HTA-520
Mono rod 1" BSP max 3 m
Mono cable 1" BSP max 24 m
Twin cable 1.5" BSP max 24 m
Coaxial 1" BSP max 6 m
$2256.00
$2368.00
$3340.00
$2704.00
Options
HT Model 200ºC
Local LCD indicator
FEP or PFA coated
ETEX 1 G 11 COR 11 B
EEX iqD a20 / A21
POA
POA
POA
POA
POA
Informative İr values
Butane
1.4
Diesel Oil
2.1-4
Cement
1.5-10
Grain
3-5
PB
1.6-1.9
Limestone
6.1-9.1
Kerosene
2.1
Sulphuric Acid
20
Crude Oil
2.1
Acetone
21
Whiting Powder
2.2-2.5
Ethanol
24
Benzene
2.3
Methanol
33.1
Asphalt
2.6
Glycol
37
Clinker
2.7
Nitrobenzene
40
Resin
3.6
Water
80
All prices are in NZ$, are GST exclusive and are subject to change without notice.
www.nivelco.com
85
Level transmitters
NIVELCO
Nivocap CT-300 Series.
2 wire capacitance level transmitter.
For liquids, powders, granules.
MODEL
DESCRIPTION
PRICE
Capacitance solid rod probe level transmitter.
Minimum relative dielectric constant of 2.
Maximum relative dielectric constant of 60.
Housing:
Plastic (PBT glass fibre reinforced, flame
retardant).
Protection:
IP67.
Mount:
1” BSP.
Wetted parts:
316 stainless steel.
Probe:
Partly or fully coated steel cable.
Probe length:
Rod, min 0.2m. max 3.0m.
Cable, min 1m. max 20m.
Ambient temp:
-25~70°C.
Medium temp:
-25~200°C.
Pressure:
Max. 16 bar at 200.°C. (Absolute).
Capacitance:
~600pF/m
Power Supply:
12~36Vdc max. 22 mA.
Output:
4~20mA, two wire.
HART Communication.
Load resistance: max. RL = (US-12V) / 0.02A
Features
i Two-wire: HART feature.
i Microcontroller based.
i Rigid and flexible probes.
i Plug-in field display module.
i Simple programming.
i Ex version available.
i High temperature model.
i HART communication.
CTR-300
CTP-300
CTK-300
CTL-300
CTN-300
Insulated rod, level transmitter.
Partially rod, level transmitter.
The above prices are for probe lengths up to 0.2m.
Insulated light cable, level transmitter.
Partially light cable, level transmitter.
The above prices are for cable lengths up to 1.0m.
Insulated heavy cable, level transmitter.
The above price is for a cable length of 2.0m.
$15.00
$7.00
High temperature: -25~200°C.
$195.00
EEx ia/ib llB T4.
(Not high temperature).
Cable length to a max of 20m.
FEP insulated:
For each extra 1m over 1m.
Partially insulated: For each extra 1m over 1m.
$43.00
$15.00
Counter weight for light cable probe.
$148.00
Ex version:
EEx ia/ib llB T4.
(Not high temperature).
Options for Heavy Duty Cable probe.
Medium temp:
-25~80°C.
Mount:
1.5” NPT or BSP.
i
i
Acids.
86
$255.00
Add Price
Cable length to a max of 20m.
PE insulated:
For each extra 1m over 2m.
$58.00
Counter weight for heavy duty cable probe.
$255.00
Accessories.
Display.
HART Modem.
$168.00
$570.00
Bases.
Non-conductive materials:
i Most petrochemicals.
i
$255.00
Add Price
Options for Light Cable probe.
Only
insulated probe
can be used.
$1450.00
PFA insulated:
For each extra 100mm over 0.2m.
Partially insulated: For each extra 100mm over 0.2m.
Note: Probe length to a max of 3m.
Ex version:
Conductive materials:
i Water based solutions.
$1050.00
$1050.00
Add Price
Options for Rod probe.
PROBE SELECTION
$990.00
$1190.00
Solvents.
Insulated or
non-insulated
probe
can be used.
www.nivelco.com
All prices are in NZ$, are GST exclusive and are subject to change without notice.
Features
i 4~20mA output.
i Stainless steel flush diaphragm.
i Wide variety of process connections.
i Great choice of ranges.
i High accuracy <0.25%.
i IP 67 protection.
i ATEX certified versions.
Applications
i Most liquids and masses in tanks and vessels.
i Chemicals with dense vapour or gas layer above the
surface.
i Viscose or corrosive materials.
i Foaming liquids.
NIVELCO
Level transmitters
Nivopress DTF
Level and Pressure transmitter. (Hydrostatic Liquid Level)
MODEL
DTF
DESCRIPTION
PRICE
Level and Pressure transmitter.
Mount:
1.5” BSP.
Housing:
Plastic or Aluminium.
Protection:
IP67.
Wetted parts:
Stainless steel.
Accuracy:
< 0.25%. F.S.O.
Turn down:
~1 : 2.
Operating temp: -30~70°C.
Medium:
-25~125°C.
Output:
4~20mA,
2 wire, loop powered.
UT = 12~30Vdc.
Load resistance: max. RL = (US-12V) / 0.02A.
Options
$1320.00
Add Price
Triclamp fitting, 2 inch.
$163.00
SAP-203 display module.
$158.00
HART Communication.
$248.00
FOR
FR EE FL
OWING G
RANULE
and BULK
S
SOLIDS
EchoTREK STD-30J Series—4 Wire.
Ultrasonic level transmitter.
Stand alone unit.
MODEL
4 Wire
STD-34J
STD-33J
STD-31J
DESCRIPTION
PRICE
EchoTREK compact ultrasonic level transmitter.
Housing:
Powder coated aluminium.
Protection:
Housing,
IP67.
Sensor,
IP65.
Transducer:
Closed cell polyurethane foam sensor face.
Polypropylene sensor housing.
Beam angle:
5°.
Ambient temp:
-25~60°C
Process temp:
-30~75°C.
Pressure:
0.7~1.1 bar (absolute).
Power supply:
85~255Vac.
50/60Hz. 6.8VA.
120~360Vdc.
5.5W.
Outputs:
4~20mA, 600ohm, galv isolated.
relay, SPDT, 250Vac / 3amp, ac1.
Range
Flange,
Range
Flange,
Range
Flange,
0.6m to 8m.
DN150 (min size) 30 kHz. 3x.*
0.6m to 25m.
DN150 (min size) 30 kHz. 3x.*
1m to 50m.
DN300 (min size) 15 kHz. 4x.*
* Dust penetration.
1x = weak…4x = excellent.
Options
$1950.00
$2250.00
$2600.00
Add price
SAP-100 programming module/indicator, custom made.
Integral, plug-in LCD 6 digit display, bargraph and icons.
Scalable in engineering units.
Power supply of:
10.5~40Vdc,
10.5~28Vac,
Approval:
Dust Ex approval.
4.1W.
50/60Hz. 4.6VA.
HART Communication.
All prices are in NZ$, are GST exclusive and are subject to change without notice.
$185.00
N/C
POA
POA
www.nivelco.com
87
Ultrasonic level transmitters
NIVELCO
FOR
EchoTREK SEP/SEM-300 Series—2 Wire.
Ultrasonic level transmitter.
With PP or PVDF transducers.
MODEL
LIQ
U
IDS
DESCRIPTION
2 Wire
PRICE
EchoTREK compact ultrasonic level transmitter.
Housing:
Plastic.
Protection:
Housing, IP67.
Sensor, IP68. (Submersible).
Transducer:
Standard = Polypropylene, (PP).
Flange material: Polypropylene, (PP).
Ambient temp:
-30~60°C.
Process temp:
-30~90°C.
Pressure:
0.3~3 bar (absolute).
Power supply:
11.4~36Vdc / 4.8mw...720mw.
Outputs:
4~20mA, (3.9...20.5mA).
SEP-390
SEP-380
SEP-370
SEP-360
SEP-340
C. I. P. CLEANING
WITH FLUSH FLANGE MOUNTING
STAINLESS STEEL MODELS
SEM-360
SEM-340
Range
Mount,
Range
Mount,
Range
Mount,
Range
Flange,
Range
Flange,
0.2m to 4m.
1.5” BSP.
0.25m to 6m.
2” BSP.
0.35m to 8m.
2” BSP.
0.35m to 10m.
DN80 (min size)
0.45m to 15m.
DN125 (min size)
$1150.00
6°.
80 kHz. 1x.*
5°.
80 kHz. 1x.*
7°.
50 kHz. 2x.*
5°.
60 kHz. 2x.*
5°.
60 kHz. 2x.*
$1150.00
$1350.00
$1450.00
$1580.00
Transducer material of Stainless Steel.
Process temp:
-30~100°C (120 °C for max 2 hrs).
Range
0.4m to 7m.
Mount,
Flush flange. Din 80.
Range
0.55m to 12m.
Mount,
Flush flange. Din 125.
$1750.00
$2020.00
* Penetration through fumes / vapour, foam. 1x = weak…4x = excellent.
i Practically any liquid.
i Reliable measurement even under
i
i
i
i
i
Options
extreme conditions with vapours,
fumes, stirrers, foam on chemicals.
32 point curve linearisation.
Volume calculation with
pre-programmed tank shapes.
Open channel flow measurement
with pre-programmed flumes and
weirs.
Capability to suppress interference
from two fixed targets.
4~20mA continuous output plus a
fully programmable relay output.
Add price
SAP-200 programming module/indicator, custom made.
Integral, plug-in LCD 6 digit display, bargraph and icons.
Scalable in engineering units.
$168.00
Housing material of powder coated aluminium.
$55.00
Transducer material of Kynar, (PVDF).
$105.00
Larger flanges.
POA
Mounting bracket 200mm.
$155.00
DATALOGGER
$160.00
10,000 sets of data-HART.
HART Communication.
POA
R-Relay
$98.00
EchoTREK SEP-300 Series.
SEP-390
Type
SEP-390
SEP-380
SEP-370
Main application field
Type
Small tanks where dead band is critical.
88
SEP-340
Main application field
SEP-360
SEP-380
SEP-370
SEP-360
SEP-340
Small process tanks with flanges.
Small process tanks with 2” process connection.
www.nivelco.com
All prices are in NZ$, are GST exclusive and are subject to change without notice.
MODEL
DESCRIPTION
4 Wire
NIVELCO
Ultrasonic level transmitters
EchoTREK STP/STM/STA-400 Series—4 Wire.
Ultrasonic level transmitter.
With PP, PVDF or PTFE transducers.
PRICE
EchoTREK compact ultrasonic level transmitter.
Housing:
Plastic.
Protection:
Housing, IP67.
Sensor, IP68. (submersible).
Transducer:
Standard = Polypropylene, (PP).
Flange material: Polypropylene, (PP).
Ambient temp:
-30~60°C
Process temp:
-30~90°C.
Pressure:
0.3~3 bar (absolute).
Power supply:
85~255Vac. 50/60Hz. 6VA.
Outputs:
4~20mA, 600ohm, galv. isolated.
relay, SPDT, 250Vac / 3amp, ac1.
Range
Mount,
Range
Mount,
Range
Mount,
Range
Flange,
Range
Flange,
Range
Flange,
STP-490
STP-480
STP-470
STP-460
STP-440
STP-420
0.2m to 4m.
1.5” BSP.
0.25m to 6m.
2” BSP.
0.35m to 8m.
2” BSP.
0.35m to 10m.
DN80 (min size)
0.45m to 15m.
DN125 (min size)
0.60m to 25m.
DN150 (min size)
$1290.00
6°.
80 kHz. 1x.*
5°.
80 kHz. 1x.*
7°.
50 kHz. 2x.*
5°.
60 kHz. 2x.*
5°.
40 kHz. 3x.*
7°.
20 kHz. 4x.*
$1290.00
$1490.00
POA
POA
POA
C. I. P. CLEANING
WITH FLUSH FLANGE MOUNTING
STAINLESS STEEL MODELS
* Penetration through fumes / vapour, foam. 1x = weak…4x = excellent.
Transducer material of Stainless steel.
Process temp:
-30~100°C. (C.I.P. 120°C for 2 hours max)
Pressure:
0.9~1.1 bar (absolute).
Range
0.4m to 7m.
Flange,
DN80 flush
5°.
60 kHz.
Range
0.55m to 12m.
Flange,
DN125 flush
5°.
40 kHz.
Range
0.65m to 15m.
Flange,
DN150 flush
7°.
20 kHz.
STM-460
STM-440
STM-420
Options
POA
POA
POA
Add price
SAP-200 programming module/indicator, custom made.
Integral, plug-in LCD 6 digit display, bargraph and icons.
Scalable in engineering units.
Power supply of:
$168.00
10.5~40Vdc, 3.6W.
10.5~28Vac, 50/60Hz. 4VA.
N/C
Transducer material of Kynar, (PVDF).
$105.00
i
Transducer material of Teflon, (PTFE). c/w 2” TriClover.
$380.00
i
POA
EchoTREK
extreme conditions with vapours,
fumes, stirrers, foam on chemicals.
32 point curve linearisation.
Volume calculation with
pre-programmed tank shapes.
Open channel flow measurement
with pre-programmed flumes and
weirs.
Capability to suppress interference
from two fixed targets.
4~20mA continuous output plus a
fully programmable relay output.
$155.00
HART Communication.
POA
STP-400 Series.
STP-490
STP-480
STP-470
Main application field
Small tanks where dead band is critical.
STP-480
STP-470
i
$55.00
Mounting bracket 200mm.
STP-490
i
i
Housing material of powder coated aluminium (= STA).
Larger flanges.
Type
i Practically any liquid.
i Reliable measurement even under
Small process tanks with 2” process connection.
All prices are in NZ$, are GST exclusive and are subject to change without notice.
STP-460
Type
STP-440
STP-420
Main application field
STP-460
Small process tanks with flanges.
STP-440
Medium size tanks.
STP-420
Medium to large size tanks.
www.nivelco.com
89
NIVELCO
Ultrasonic level transmitters
FOR
LIQ
U
IDS
EasyTREK SPA-300 Series
Ultrasonic level transmitter.
For liquids.
MODEL
2 Wire
Features
i 4, 6, 8, 10 and 15m ranges.
i
i
HART programming (HART Only).
Excellent focusing:
5° total beam angle.
SPA-390
i
i
IP68 protection.
SPA-380
Built-in temperature compensation.
SPA-370
SPA-360
SPA-340
Programmable features
via HART communications:
i Measurement configuration
(Units, function, blanking ranges).
i
Measurement optimisation
(damping, tracking speed, ignoring
stirrers etc).
i
Tank contents profiles: 14 different
shapes.
i
Open Channel Flow Metering: 21
different profiles.
i
i
32 point linearisation.
DESCRIPTION
Transducer:
Protection:
Ambient temp:
Process temp:
Pressure:
Beam angle:
Resolution:
Damping:
Power supply:
Outputs:
Communication:
Accuracy:
PRICE
Polypropylene.
IP68.
-30~60°C.
-30~60°C.
0.3~3 bar (absolute).
5°.
<2m = 1mm. 2...5m = 2mm. 5...10m = 5mm.
10 sec, 30 sec, 60 sec, (programmable).
10.5~40Vdc, 3.6W. and 10.5~28Vac, 4VA.
4~20mA, HART, max 600 ohm.
HART protocol. (HART Only).
±0.2% of measured distance + 0.05% of range.
Ultrasonic transmitter. 0.25m
Mount:
1½” BSP.
Ultrasonic transmitter. 0.25m
Mount:
1” or 2” BSP.
Ultrasonic transmitter. 0.35m
Mount:
2” BSP.
Ultrasonic transmitter. 0.35m
Mount:
1” BSP.
Ultrasonic transmitter. 0.45m
Mount:
1” BSP.
to 4m.
$995.00
to 6m.
$995.00
to 8m.
$1170.00
to 10m.
$1170.00
to 15m.
$1250.00
Options
Add price
SAA-101
Fast connecting gland for pipe mounting devices with 1".
$28.00
SAT-304
HART/USB Modem.
$459.00
SAK-305
HART USB/RS485 Modem.
$625.00
Information/diagnostics (Echo map
and signal/noise).
Ultrasonic notes
Temperature.
All Nivelco ultrasonic devices have built in temperature compensation over the entire measuring range.
5m
r = 220mm
10m
r = 440mm
15m
Pressure.
Because of the physical characteristics of ultrasound, ultrasonic measurement is limited in vacuum and high pressure
applications.
Sonic Cone.
Most of Nivelco’s transducers have a 5°~7° total beam angle at -3dB, ensuring a reliable measurement in narrow silos
with uneven side walls as well as in process bins with various protruding objects. Furthermore, as a result of the narrow
beam angle, the emitted ultrasonic signal ensures outstanding focusing and good penetration through dust, gases,
vapour and foam.
r = 660mm
Transducer Material.*
20m
r = 880mm
r
Radii corresponding
to 5° beam angle.
90
*Contact Intech
for more Info.*
Nivelco offer a wide range of transducer materials:
Polypropylene (PP):
Resists most caustics, acids and bases.
Kynar (PVDF):
Resists acids and most solvents.
Teflon (PTFE):
Resists acids and most solvents. Accepted in hygienic applications.
Stainless steel (316)
Ultimate resistance against solvents. Accepted in hygienic applications.
Withstands CIP cleaning up to 120°C.
www.nivelco.com
All prices are in NZ$, are GST exclusive and are subject to change without notice.
Download PDF