Product Description -- FWT WiFi AP with EVDO A 1900

Since 1988
Data Sheet for FWT WiFi AP w/HSPA+ (Model : FWT_226)
Wireless Router with Fixed Wireless Terminal, WAN and Internal HSPA+
(HSPA+ Module Model: ZTE MF226)
FWT WiFi AP w/HSPA+ is a Wireless Router with WAN port and internal HSPA+ cellular
modem for Internet access. It is also a Fixed Wireless Terminal (FWT) using the voice band of the
cellular modem while simultaneously access the Internet using the data band of internal modem.
It also offers calling features such as call waiting, call forwarding, call barring, conference
call and caller ID, etc. FWT supports TR-069 management and optional FAX through Fax Relay Server.
Figure Showing the Application Example
Broadband
Modem
Ether WAN
Supports Statics IP, DHCP IP and
PPPoE for internet access via
Ether WAN port
General Features







Internet access over WAN (support DHCP, Static IP, PPPoE) and internal HSPA+ modem
Fail-over from WAN to Cellular or Load Balance among WAN and Cellular .
WiFi access point (Internal antenna)
FWT (Fixed Wireless Terminal)
Short message SMS
Built-in TR-069 for Management
VPN pass-through / VPN client
Revision 1.0.7
@3JTech
Page 1 of 6
Since 1988
Calling Features





Call Waiting
Call Barring
Call Forwarding
Call Conferencing
Caller ID
Specifications of Internal Cellular Modem
For HSPA+
• WCDMA/HSDPA 2100/1900/850(900)MHz
• GSM/GPRS/EDGE 850/900/1800/1900MHz
• GSM CS: UL 9.6kbps/DL 9.6kbps
• GPRS: Multi-slot Class 10
• EDGE: Multi-slot Class 12
• WCDMA CS: UL 64kbps/DL 64kbps
• WCDMA PS: UL 384kbps/DL 384kbps
• HSUPA: UL 5.76 Mbps (Category 6)
• HSPA+: DL 14.4 Mbps (Category 10)
Transmit Power:
• UMTS Bands: 24 +1/-3dBm (Power Class 3)
• GSM/GPRS 850/900: 33±2dBm (Power Class 4)
• GSM/GPRS 1800/1900: 30±2dBm (Power Class 1)
• EDGE 850/900: 27±3dBm (Power Class E2)
• EDGE 1800/1900: 26 -4/+3dBm (Power Class E2)
Receiving sensitivity:
• WCDMA2100: ≤-108 dBm
• WCDMA1900/850: ≤-106 dBm
• WCDMA900: ≤-105 dBm
• GSM850/900/1800/1900: ≤-103.5 dBm
Certifications:
CCC, CE, CMIIT, FCC, GCF, IC, JATE, PTCRB, RoHS, TELEC, WEEE
Operators: AT&T/NTT&DOCOMO
Wi-Fi Specification
Output Power (Wi-Fi)
 802.11n:11 dbm
 802.11g:13 dbm
 802.11b:15 dbm
Revision 1.0.7
@3JTech
Page 2 of 6
Since 1988
Sensitivity (Wi-Fi):
 802.11n : -68 dBm
 802.11g : -68 dBm
 802.11b : -85 dBm
Wi-Fi Frequencies
 2,4 - 2,462 GHz, CCK / OFDM (Modulation Range Coverage)
Wi-Fi Distances
 Indoor: approximately 30 to 50 meters
 Outdoor: 80 to 100 meters
Compatibility
 IEEE 802.3 10 Base-T Ethernet
 IEEE 802.3u 100 Base-TX Fast Ethernet
 IEEE 802.3x Flow Control
 IEEE 802.11 b/g/n Wireless
Mechanical Specifications






Plastic Housing with External Connectors
Dimension (L x W x H): 110 x 155 x 32 mm
Weigh: 260g
Operating Temperature : -10°C to +55°C
Storage Temperature: -20°C ~ +60°C
Storage Humidity : 5% to 85% of relative humidity (with no condensation)
Connection Interfaces





WAN Ethernet Interface 10/100 Base-TX, connector RJ-45
LAN Ethernet Interface 10/100 Base-TX, connector RJ-45
RJ11 FXS Interface for Handset fixed phone (FWT)
SMA Connector for external 5 bands 3G antenna (50 Ohm - option for internal 5 bands 3G
antenna)
Internal SIM Card Reader: Chip SIM CR 3.0V, 1.8V
SMS



Point to Point MO and MT
SMS Cell Broadcast
Support PDU and Text mode
Voice


Vocoders: 13K, QCELP, EVRC
Support DTMF
Router Specifications
Revision 1.0.7
@3JTech
Page 3 of 6
Since 1988
Firewall
 IP and MAC Filter
 Virtual Server and DMZ
 NAT (Network Address Translation)
VPN
 PPTP , L2TP passthrough
 PPTP , L2TP client
Communication Protocols
 IP, NAT, DHCP, PAP, CHAP, PPP, TCP, UDP, HHTP, NTP, TR-069
(other protocols upon request)
Power Specifications
AC-DC Power Adapter
 Input: 90 to 240 VAC / 0.3A
 Frequency: 50/60 Hz
 Output: 8 VDC / 1 A
DC Input
 Input Voltage Range: 6 to 12 VDC
 Input Power: 8 W
 Input Connector: J4 (internal positive)
*Specifications are subject to change without notice.
Product Name
Model
Description
FWT Wifi AP
FWT_226
built-in HSPA+ modem MF226
(1xLAN, 1xWAN,1x3G, 1xwifi ,1x RJ11)
FWT_8300
built-in LTE modem for China
(1xLAN, 1xWAN,1x3G, 1xwifi ,1x RJ11)
FWT_8301
built-in LTE modem for Asia
FWT_8620
built-in LTE modem ( Bands for EU ,Aisa , America)
(1xLAN, 1xWAN,1x3G, 1xwifi ,1x RJ11)
Revision 1.0.7
@3JTech
Page 4 of 6
Since 1988
Figure showing the Interfaces
Phone Jack
to Phone Set
(RJ11)
SIM slot
DC Jack
Reset
SMA connector for optional
external Cellular Antenna
(Default: Internal PCB Antenna)
WAN port (RJ45)
LAN port (RJ45)
Revision 1.0.7
@3JTech
Page 5 of 6
Since 1988
Figure Showing the LEDs
Power
LED
SMS LED
WLAN
LAN 1
WAN
Cellular
WAN
Phone Status
Status
Revision 1.0.7
@3JTech
Cellular
Signal
Strength
Page 6 of 6
Download PDF

advertising