Solutions direct www.solutionsdirectonline.com Raytek® Compact Series GP Noncontact Temperature Measurement for Industrial Applications GP Highlights ■ Temperature range from -18°C to 538°C (0°F to 1000°F) ■ Compact 1/8 DIN digital monitor with large 4-digit display ■ Monitor and sensor functions configured on front panel ■ Signal processing capabilities typically found on much larger systems ■ Adjustable emissivity and T-ambient parameters ■ Universal 110–220 VAC power included ■ User-defined 4–20 mA or thermocouple output (J, K, E, N, R, S, T) ■ Adjustable dual setpoints, deadband alarm outputs and optional mechanical relays ■ Choice of sensing head to match application requirements ■ Field interchangeable sensing heads ■ Standard and close focus optics available ■ Accessories for cooling and air purging ■ GPS Laser Sighted Head w/ 50:1 optical resolution The GP Series is a versatile, two-piece temperature monitoring system that combines a compact, value-priced monitor with an infrared sensing head. The heart of the system is the 1/8 DIN GP monitor which provides advanced infrared processing capabilities including peak and valley hold, averaging, and a user-adjustable offset. The rugged Thermalert GPR sensor is available with standard or close focus optics, and provides target temperature readings with 1% accuracy. Along with its large 4-digit LED display, the monitor provides a user-defined 4–20mA or thermocouple output. Two adjustable setpoints/deadbands control 5V alarm outputs or optional 3A mechanical relays. The GP monitor accepts universal 110–220 VAC power, and provides a 24 VDC/50 mA excitation voltage for loop power to external sensors. All monitor functions are configured via the front panel, including °C/°F switching. Measurement Specifications Monitor with Sensing Head Spectral Response GPR/GPS 8 to 14 microns Temperature Range GPR/GPS -18°C to 538°C (0°F to 1000°F) System Accuracy (mA output) 1% of measured value or ±1°C (2°F), ± whichever is greater * System Repeatability±0.5% of measured value or ±1°C (2°F) whichever is greater Response Time (95%) GPR/GPS 300 mSec Emissivity 0.1 to 1.09 digitally adjustable increments of .01 Signal ProcessingPeak and valley hold (up to 998 sec, 999=infinite hold with external reset). Variable averaging filter (up to 60 seconds). T-ambient: fixed background ambient temperature compensation * (@ 23°C ±5°C (73°F ±9°F) Nominal Optical Specifications GPR Sensing Head Optical Charts RAYGPRCF RAYGPRSF GPS Sensing Head Optical Charts RAYGPSCFL RAYGPSSFL The GP monitor provides adjustable emissivity and ambient compensation when used with the GPR/GPS infrared sensors. These high performance, 8–14 micron sensors, combine current loop driven signals with high resolution optics. The GP monitor also works with other Raytek infrared sensors, including the CI, TX, MI and Marathon Series sensors. (NOTE: nominal spotsize based on 90% energy) Electrical Specifications Power Supply110/220 VAC, ±20%, 50–60 Hz InputsUser configurable inputs for GPR, GPS, any 0-5 V or 4-20 mA sensor, or thermocouple (J, K, E, N, R, S, T) External reset input to reset peak/valley hold Outputs4-digit, 7 segment LED display, °C/°F selectable User configurable 4-20 mA current or thermocouple output (J, K, E, N, R, S, T) Two adjustable setpoints with deadbands controlling +5 V alarm outputs or optional 3A mechanical relays 24 VDC/50 mA excitation voltage Sensor Specifications Environmental Rating: GP monitor front panel IP 54 (IEC 529); NEMA-12 GPR/GPS sensing head IP 65 (IEC 529); NEMA-4* * GPR/GPS rated with adapter and compression fitting Ambient Temperature Range: GP monitor GPR/GPS sensing head 0°C to 50°C (32°F to 120°F) 0°C to 65°C (32°F to 150°F) GPS laser shuts off automatically at 50°C (120°F) with optional water cooling with optional air cooling 0°C to 177°C (32°F to 350°F) 0°C to 120°C (32°F to 250°F) Storage Temperature -30°C to 65°C (-22°F to 150°F) Relative Humidity 10 to 95%, non-condensing GP Monitor Dimensions1/8 DIN x 120 mm (1.75 x 3.63 x 4.75 in) GP Monitor Weight 320 g (0.7 lbs) Physical Ratings GPR/GPS vibration GPR/GPS shock MIL-STD-8100, (IEC 68-2-6): 3 G's, 11 to 200Hz any axis MIL-STD-8100, (IEC 68-2-27): 50 G's, 11 msec any axis Sensor Dimensions Accessories Options GP Monitor ■ Accessory mounting bracket for sub-panel installation (XXXGPACFB) ■ Accessory solid state relays, 10 Amp AC (XXXGPSSRAC) ■ ptional 3A mechanical relays O (RAYGPCM must be specified at time of order) GPR/GPS Sensors Accessory air purge collar to keep lens clean (XXXTXXACAP) ■ GPR Sensing Head ■ Accessory conduit adapter, adapts sensor threads to .5 in. NPT (XXXTXXACCA) ■ Accessory pipe adapter, adapts sensor threads to 1.5 in. NPT (XXXTXXACPA) ■ Accessory right angle mirror, provides perpendicular view of target in tight installations (XXXTXXACRA) ■ ptional air/water cooled housing for installation in O environments up to 177ºC (350ºF) ■ Optional NIST traceable calibration certificate GPS/GPR Sensing Head Model RAYGPR Code A SF Description Raytek Noncontact Temperature Sensor Focus Option GPR standard focus sensing head with 8-14 micron spectral response and 35:1 optical resolution CF GPR close focus sensing head with 8-14 micron spectral response, 3 mm (.1") and 35:1 spot size at 76 mm (3") distance Code B W C Options (must be specified at time of order) Air/Water coolable housing includes air purge collar 7-pin DIN connector instead of 5-pin bayonet connector A B Focus Option Options RAYGPS Model RAYGPS Code A SFL Description Raytek Noncontact Temperature Sensor Focus Option GPS standard focus sensing head with 8-14 micron spectral response and 50:1 optical resolution CFL GPS close focus sensing head with 8-14 micron spectral response, 4.5 mm (.18") and 35:1 spot size at 200 mm (8") distance Code B W Options (must be specified at time of order) Air/Water coolable housing includes air purge collar Model RAYGPC Description GPC panel mount meter with standard 5 VDC alarm outputs, 110/220 VAC power RAYGPCM GPC panel mount meter with 3A mechanical alarm relay outputs, fully isolated electrical inputs and outputs, 110/220 VAC power The Worldwide Leader in Noncontact Temperature Measurement Raytek Corporation Worldwide Headquarters Santa Cruz, CA USA Tel: 1 800 227 8074 (USA and Canada, only) 1 831 458 3900 email@example.com European Headquarters Berlin, Germany Tel: 49 30 4 78 00 80 firstname.lastname@example.org www.raytek.com China Headquarters Beijing, China Tel: 8610 6438 4691 email@example.com To find a Raytek office near you, please visit www.raytek.com Worldwide Service Raytek offers services, including repair and calibration. For more information, contact your local office or e-mail firstname.lastname@example.org © 2010 Raytek Corporation ( 3111632 Rev. I) 11/2010 Raytek and the Raytek logo are registered trademarks of Raytek Corporation. Specifications subject to change without notice.