XS5/XS6 - OMRON Industrial Automation

Industrial Ethernet Cables
XS5/XS6
Cables and Connectors for
EtherCAT® and Other Industrial Ethernet Networks
CAT6a Ethernet patch cables
• For in-cabinet use
• LSZH with standard RJ45 plugs
CAT5e Ethernet patch cables
• For out-of-cabinet use
• PUR with standard RJ45 plugs
• PVC with rugged RJ45 plugs
• PVC with M12 SmartClick plugs
• In addition to cables with sockets and robot cables,
shield strengthening cables joined.
■ Connection Examples
ADR
ADR
ADR
Control panel
Ideal for in-cabinet
XS6W-6LSZH
Ideal for out-of-cabinet
XS6W-5PUR
XS5
Standard Connectors
Standard Connectors
XS6
Rugged Connectors
Rugged Assembly Connectors
XS5
M12 Connectors (Waterproof)
1
XS5/XS6
Industrial Ethernet Cables
■ Features
Cables with Standard RJ45 Connectors
For details, refer to page 4.
• The lineup features LSZH cables* for in-panel wiring and PUR cables for wiring outside of panels.
• The Standard RJ45 Connectors reduce cable routing space. LSZH cables are AWG26 with an outer diameter of 6.3 mm. PUR Cables
are AWG26 with an outer diameter of 6.0 mm.
• Cable colors include blue, yellow, or green.
• LSZH cables are available in 12 lengths from 0.2 to 20 m and PUR cables are available in 10 lengths from 0.5 to 20 m.
• Single-shielded cables with individual aluminum tape on each wire pair to reduce EMC interference in industrial environments.
Note. PUR cables are double-shielded cables with overall braiding and individual aluminum tape on each wire pair.
* Low-smoke zero-halogen cables.
Shape of RJ45 Connector
Cables with Rugged RJ45 Connectors
For details, refer to page 7.
• Tough latches and RJ45 connectors with strong cable holding strength are used to enable connections outside of control panels.
• Quad AWG22 cable with PVC cover of 6.5 mm outer diameter.
• Double-shielded cables with overall braiding and individual foil shield to reduce EMC interference in industrial environments.
Shape of RJ45 Connector
Tough latch
PVC Cable with Double Shield
Overall braiding and individual foil shield
Assembly Connectors
You can easily assemble Ethernet cables onsite without crimping tools or other special tools.
Refer to page 14 for the assembly procedure.
● Cable Extension Length
Standard Connectors (RJ45 Connectors)
61 mm
Minimum cable
bending radius:
25 mm
2
Rugged Connectors (RJ45 Connectors)
89 mm
Minimum cable bending
radius: 40 mm
XS5/XS6
Industrial Ethernet Cables
Cables with M12 Connectors (Waterproof)
•
•
•
•
For details, refer to page 7.
Resistance to harsh environments with IP67 protection.
SmartClick Connectors that provide one-step (1/8th turn) connection are used (compatible with standard M12 screw connectors).
A wide range of variations, such as cables with right-angle connectors and PCB connectors.
Cables with sockets and robot cables were added to the series.
Shape of M12 Connector
PVC Cable with Double Shield
Overall braiding and individual foil shield
Shield structure
Cables with M12 Connectors
Shield Strengthening Cables specification
For details, refer to page 7.
• Cable specification with strengthened shield for higher noise resistance. Recommended for EtherCAT communications.
• In addition to a double shield structure, copper foil tape is added to the M12 connector to improve communication characteristics (see
below).
Shield Strengthening Cable
(Double shield structure + copper foil tape wrapping)
<Internal structure>
Noise resistance is strengthened by wrapping
copper foil tape around the part where the cable
in the M12 connector joins the shield plate.
Shield Effectiveness Data for Rugged RJ45 Connectors and M12 Connectors (Waterproof)
The following data is the results of OMRON testing. Shield effectiveness may vary for your environment and application conditions.
● Comparison of Shield Effectiveness with Product without a Double Shield
The following table shows the differences with a structure without a double shield. Higher numeric values show greater shield effectiveness.
Shield structure
Frequency (MHz)
0.5
1
5
10
30
Product with single shield
53 dB
49 dB
35 dB
25 dB
17 dB
Product with a double shield (XS5@-T, Category 5E)
61 dB
58 dB
43 dB
31 dB
27 dB
• SmartClick is a registered trademark of OMRON Corporation.
• EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
• Other company names and product names in this document are the trademarks or registered rademarks of their respective companies.
3
XS5/XS6
Industrial Ethernet Cables
Cables with Standard RJ45 Connectors
■ Model Number Legend
Use this legend when determining the product specifications from the model number. Choose from the model numbers listed in Ordering
Information when ordering.
X S6 W -@ @ @ @ @ 8 SS @ @ @ @ C M- @
A
B
C D
ATransmission Characteristics
5: Category 5
6: Category 6A
E
BSheath Material
LSZH: LSZH
PUR: PUR
CNumber of Pins
8: 8 pins
DCable Attachment Direction
SS: Straight/Straight
ECable Length*
20: 0.2 m
30: 0.3 m
50: 0.5 m
100: 1 m
150: 1.5 m
200: 2 m
300: 3 m
500: 5 m
750: 7.5 m
1000: 10 m
1500: 15 m
2000: 20 m
FSheath Color
B: Blue
Y: Yellow
G: Green
* PUR cables are not available for 0.2-m and 0.3-m cables.
4
F
XS5/XS6
Industrial Ethernet Cables
■ Ordering Information
Appearance
Type
Category
Cable sheath
material
Cable color Cable length (m)
Blue
Cat.6a
LSZH
Yellow
Cable with
Connectors on Both
Ends (RJ45/RJ45)
Green
Cat.5
PUR
Green
Model
0.2
XS6W-6LSZH8SS20CM-B
0.3
XS6W-6LSZH8SS30CM-B
0.5
XS6W-6LSZH8SS50CM-B
1
XS6W-6LSZH8SS100CM-B
1.5
XS6W-6LSZH8SS150CM-B
2
XS6W-6LSZH8SS200CM-B
3
XS6W-6LSZH8SS300CM-B
5
XS6W-6LSZH8SS500CM-B
7.5
XS6W-6LSZH8SS750CM-B
10
XS6W-6LSZH8SS1000CM-B
15
XS6W-6LSZH8SS1500CM-B
20
XS6W-6LSZH8SS2000CM-B
0.2
XS6W-6LSZH8SS20CM-Y
0.3
XS6W-6LSZH8SS30CM-Y
0.5
XS6W-6LSZH8SS50CM-Y
1
XS6W-6LSZH8SS100CM-Y
1.5
XS6W-6LSZH8SS150CM-Y
2
XS6W-6LSZH8SS200CM-Y
3
XS6W-6LSZH8SS300CM-Y
5
XS6W-6LSZH8SS500CM-Y
7.5
XS6W-6LSZH8SS750CM-Y
10
XS6W-6LSZH8SS1000CM-Y
15
XS6W-6LSZH8SS1500CM-Y
20
XS6W-6LSZH8SS2000CM-Y
0.2
XS6W-6LSZH8SS20CM-G
0.3
XS6W-6LSZH8SS30CM-G
0.5
XS6W-6LSZH8SS50CM-G
1
XS6W-6LSZH8SS100CM-G
1.5
XS6W-6LSZH8SS150CM-G
2
XS6W-6LSZH8SS200CM-G
3
XS6W-6LSZH8SS300CM-G
5
XS6W-6LSZH8SS500CM-G
7.5
XS6W-6LSZH8SS750CM-G
10
XS6W-6LSZH8SS1000CM-G
15
XS6W-6LSZH8SS1500CM-G
20
XS6W-6LSZH8SS2000CM-G
0.5
XS6W-5PUR8SS50CM-G
1
XS6W-5PUR8SS100CM-G
1.5
XS6W-5PUR8SS150CM-G
2
XS6W-5PUR8SS200CM-G
3
XS6W-5PUR8SS300CM-G
5
XS6W-5PUR8SS500CM-G
7.5
XS6W-5PUR8SS750CM-G
10
XS6W-5PUR8SS1000CM-G
15
XS6W-5PUR8SS1500CM-G
20
XS6W-5PUR8SS2000CM-G
5
XS5/XS6
Industrial Ethernet Cables
■ Specifications
Type
Item
Cable with Connectors on Both Ends
(RJ45/RJ45)/LSZH
Cable with Connectors on Both Ends
(RJ45/RJ45)/PUR
XS6W-6LSZH8SS@@@@CM-@
XS6W-5PUR8SS@@@@CM-G
Model
Rated current
1 A (at 50°C)
Withstand voltage
1,000 VDC for 60 s (leakage current: 1 mA max.)
Ambient operating temperature
−20 to 75°C
−40 to 80°C
Ambient storage tempera−20 to 75°C
ture
−40 to 80°C
Ambient installation temperature
0 to 50°C
−10 to 60°C
Protective structure
IP20
■ Materials and Finish
● Connectors
Type
Item
Cable with Connectors on Both Ends
(RJ45/RJ45)/LSZH
Cable with Connectors on Both Ends
(RJ45/RJ45)/PUR
XS6W-6LSZH8SS@@@@CM-@
XS6W-5PUR8SS@@@@CM-G
Model
Connector housing
PC resin (UL94V-0)/transparent
Contacts
Copper alloy/nickel base, gold plated
Shield
Brass/nickel plated
Cover
(structured to prevent the
tab from breaking)
PA/Black
Marking tube
PVC resin (UL94V-0)/transparent
● Cables
Type
Item
Cable with Connectors on Both Ends
(RJ45/RJ45)/LSZH
Cable with Connectors on Both Ends
(RJ45/RJ45)/PUR
XS6W-6LSZH8SS@@@@CM-@
XS6W-5PUR8SS@@@@CM-G
Model
Compliant standard
IEC 60332-1 /UL444
Number of cores
AWG26
IEC 60332-1
Outer diameter *1
6.3 mm
6.0 mm
Sheath color *2
Blue, yellow, or green
Green
Sheath material
LSZH
PUR
Shield structure
Single shield
Double shield
*2. Sheath.
*1. Outer diameter.
■ Dimensions
(Unit: mm)
● Cable with Connectors on Both Ends (RJ45/RJ45)
XS6W-6LSZH8SS@@@@CM-@
XS6W-5PUR8SS@@@@CM-G
Wiring
RJ45
1
2
3
4
5
6
7
8
Shield
RJ45
1
2
3
4
5
6
7
8
Shield
L (Cable length)
(16)
10.5
40.8
18
18
13.8
Marking tube
6
Label
6.3 dia.
Marking tube
40.8
XS5/XS6
Industrial Ethernet Cables
Cables with Rugged RJ45 Connectors and Cables with M12 Connectors
■ Model Number Legend
Use this legend when determining the product specifications from the model number. Choose from the model numbers listed in Ordering
Information when ordering.
● Cable with Connectors
● RJ45 Assembly Connectors
XS 5@ - T 4 2 @ -@ M @ -@ @
A BCD E F
G
XS6G-T 4 2 1-1
H
ABCD E
AConnector Shape
H: Cable with plug on one end
W: Cable with connectors on both ends
AType
T: Ethernet
BType
T: Ethernet (mating part: M12 D coding)
4: 4 pins
CNumber of Pins
4: 4 pins
2: Gold plating, 0.4 μm
DContact Plating Specification
2: Gold plating, 0.4 μm
1: Straight
ECable Attachment Direction (M12 Connectors)
1: Straight
2: Right angle
FCable Length
A: 0.3 m
B: 0.5 m
C: 1 m
D: 2 m
E: 3 m
G: 5 m
J: 10 m
K: 15 m
GConnector Shape
0: M12 plug on one end
1: Connectors on both ends: M12 socket/M12 plug
2: Connectors on both ends: M12 plug/M12 plug
C: Connectors on both ends: M12 plug/RJ45 plug
D: Connectors on both ends: RJ45 plug/RJ45 plug
E: Connectors on both ends: M12 socket/RJ45 plug
HCable Specification
K: Standard cable
KR: Robot cable
SS: Shield Strengthening cable
BNumber of Pins
CContact Plating Specification
DCable Attachment Direction
EDegree of Protection
1: IP20
● M12 Connectors for Panel Mounting
X S 5 P - T 4 2 @ -@
ABCD E
AType
T: Ethernet (mating part: M12 D coding)
BNumber of Pins
4: 4 pins
CPlating Specification
2: Gold plating, 0.4 μm
DMounting Method
6: Rear lockingt
7: Front locking
ETerminal Shape
1: DIP terminalst
5: Cable with loose wires (0.5 m)
7
XS5/XS6
Industrial Ethernet Cables
■ Ordering Information
Appearance
Cable type
Type
Cable with Plug on One End
(M12 Straight)
Cable with Plugs on Both Ends
(M12 Straight/M12 Straight)
Cable with Plugs on Both Ends
(M12 Straight/RJ45)
Cable with Plug on One End
(M12 Right-angle)
Standard Cables
Cable with Plugs on Both Ends
(M12 Right-angle/M12 Right-angle)
Cable with Plugs on Both Ends
(M12 Right-angle/RJ45)
Cable with Plugs on Both Ends
(RJ45/RJ45)
Cable with Plug on One End and Socket on
Other End
(M12 Straight/M12 Straight)
Cable with Plug on One End and Socket on
Other End
(M12 Straight/RJ45)
8
Cable length (m)
0.5
1
2
3
5
10
Model
XS5H-T421-BM0-K
XS5H-T421-CM0-K
XS5H-T421-DM0-K
XS5H-T421-EM0-K
XS5H-T421-GM0-K
XS5H-T421-JM0-K
15
XS5H-T421-KM0-K
0.5
1
2
3
5
10
XS5W-T421-BM2-K
XS5W-T421-CM2-K
XS5W-T421-DM2-K
XS5W-T421-EM2-K
XS5W-T421-GM2-K
XS5W-T421-JM2-K
15
XS5W-T421-KM2-K
0.3
0.5
1
2
3
5
10
15
0.5
1
2
3
5
10
XS5W-T421-AMC-K
XS5W-T421-BMC-K
XS5W-T421-CMC-K
XS5W-T421-DMC-K
XS5W-T421-EMC-K
XS5W-T421-GMC-K
XS5W-T421-JMC-K
XS5W-T421-KMC-K
XS5H-T422-BM0-K
XS5H-T422-CM0-K
XS5H-T422-DM0-K
XS5H-T422-EM0-K
XS5H-T422-GM0-K
XS5H-T422-JM0-K
15
XS5H-T422-KM0-K
0.5
1
2
3
5
10
XS5W-T422-BM2-K
XS5W-T422-CM2-K
XS5W-T422-DM2-K
XS5W-T422-EM2-K
XS5W-T422-GM2-K
XS5W-T422-JM2-K
15
XS5W-T422-KM2-K
0.3
0.5
1
2
3
5
10
15
0.3
0.5
1
2
3
5
10
15
0.5
1
2
3
5
10
15
0.5
1
2
3
5
10
15
XS5W-T422-AMC-K
XS5W-T422-BMC-K
XS5W-T422-CMC-K
XS5W-T422-DMC-K
XS5W-T422-EMC-K
XS5W-T422-GMC-K
XS5W-T422-JMC-K
XS5W-T422-KMC-K
XS5W-T421-AMD-K
XS5W-T421-BMD-K
XS5W-T421-CMD-K
XS5W-T421-DMD-K
XS5W-T421-EMD-K
XS5W-T421-GMD-K
XS5W-T421-JMD-K
XS5W-T421-KMD-K
XS5W-T421-BM1-K
XS5W-T421-CM1-K
XS5W-T421-DM1-K
XS5W-T421-EM1-K
XS5W-T421-GM1-K
XS5W-T421-JM1-K
XS5W-T421-KM1-K
XS5W-T421-BME-K
XS5W-T421-CME-K
XS5W-T421-DME-K
XS5W-T421-EME-K
XS5W-T421-GME-K
XS5W-T421-JME-K
XS5W-T421-KME-K
XS5/XS6
Appearance
Industrial Ethernet Cables
Cable type
Type
Cable with Plug on One End and Socket on
Other End
(M12 Straight/M12 Straight)
Cable with Plugs on Both Ends
(M12 Straight/M12 Straight)
Robot Cables
Cable with Plugs on Both Ends
(M12 Straight/RJ45)
Cable with Plugs on Both Ends
(RJ45/RJ45)
Cable with Plugs on Both Ends
(M12 Straight/M12 Straight)
Shield Strengthening
Cables
Cable with Plugs on Both Ends
(M12 Straight/RJ45)
Model
XS5W-T421-BM1-KR
XS5W-T421-CM1-KR
XS5W-T421-DM1-KR
XS5W-T421-EM1-KR
XS5W-T421-GM1-KR
XS5W-T421-JM1-KR
XS5W-T421-KM1-KR
XS5W-T421-BM2-KR
XS5W-T421-CM2-KR
XS5W-T421-DM2-KR
XS5W-T421-EM2-KR
XS5W-T421-GM2-KR
XS5W-T421-JM2-KR
XS5W-T421-KM2-KR
XS5W-T421-BMC-KR
XS5W-T421-CMC-KR
XS5W-T421-DMC-KR
XS5W-T421-EMC-KR
XS5W-T421-GMC-KR
XS5W-T421-JMC-KR
XS5W-T421-KMC-KR
XS5W-T421-BMD-KR
XS5W-T421-CMD-KR
XS5W-T421-DMD-KR
XS5W-T421-EMD-KR
XS5W-T421-GMD-KR
XS5W-T421-JMD-KR
XS5W-T421-KMD-KR
0.5
XS5W-T421-BM2-SS
1
XS5W-T421-CM2-SS
2
XS5W-T421-DM2-SS
3
XS5W-T421-EM2-SS
5
XS5W-T421-GM2-SS
10
XS5W-T421-JM2-SS
0.5
XS5W-T421-BMC-SS
1
XS5W-T421-CMC-SS
2
XS5W-T421-DMC-SS
3
XS5W-T421-EMC-SS
5
XS5W-T421-GMC-SS
10
XS5W-T421-JMC-SS
---
XS6G-T421-1
Rear locking
0.5
XS5P-T426-5
Front locking
0.5
XS5P-T427-5
---
XS5P-T426-1
RJ45 Assembly Connector
Standard Cables
Cable length (m)
0.5
1
2
3
5
10
15
0.5
1
2
3
5
10
15
0.5
1
2
3
5
10
15
0.5
1
2
3
5
10
15
M12 Connector for Panel
Mounting
M12 Panel-mounting PCB Straight Terminals
9
XS5/XS6
Industrial Ethernet Cables
●Cable Bending Data for Robot Cables (XS5W-T421-@M@-KR)
The following data is the results of OMRON testing for cable bending test conditions. The number of bends may vary for your environment and application conditions.
Cableveyor Test
90° Bending Test
Number of bends: 20 million min.
Number of bends: 6 million min.
Travel distance
Cable secured to end
Cableveyor
Cable secured to end
Roller
Travel speed: Approx. 120 m/min
Travel distance: 1 m
Cableveyor radius: 75 mm
Cable
Bending angle: ±90°
Speed: Approx. 30 bends/min
Roller radius: 60 mm
Weight: 500 g
10
Weight
XS5/XS6
Industrial Ethernet Cables
■ Specifications
Cable with
Type Plug on One
End (M12)
Item
Model
XS5H
-T42@-@M0-K
Cable with
Plugs on Both
Ends
(M12/M12)
Cable with
Plug on One
End and
Socket on
Other End
(M12/M12)
Cable with
Plugs on Both
Ends
(M12/RJ45)
XS5W
-T42@-@M2-K,
-KR
XS5W
-T42@-@M1-K,
-KR
XS5W
-T42@-@MC-K,
-KR
Rated current
3A
Rated voltage
30 V
Contact resistance
40 mΩ max.
Insulation resistance
1,000 MΩ min.
Withstand voltage
1,000 VAC for 60 s (leakage current: 1 mA max.)
Ambient operating
temperature
−25 to 70°C*
Ambient storage
temperature
−25 to 70°C
Protective structure
M12: IEC IP67, RJ45: IEC IP20
Cable with
Plug on One
End and
Socket on
Other End
(M12/RJ45)
Cable with
M12 ConnecPlugs on Both RJ45 Assembly
tor for Panel
Ends
Connector
Mounting
(RJ45/RJ45)
XS5W
-T421-@MD-K,
-KR
XS5W
-T421-@ME-K
XS6G
-T421-1
2.5 A
M12 Panelmounting PCB
Straight Terminals
XS5P-T42@-5
XS5P
-T426-1
4A
125 VDC
500 MΩ min.
1,000 MΩ min.
1,500 VAC for 60 s
(leakage current: 1 mA max.)
* Use the robot cable within a temperature range between 0°C and 70°C to prevent the wires inside the cable from being broken when bending it.
■ Materials and Finish
● Connectors
Model
M12
Item
XS5H and XS5W
Contact blocks
RJ45
XS5P-T42@-5
XS5P-T426-1
XS5W and XS6G
PBT resin (UL94V-0)/light gray
PA resin (UL94V-0)/black
PA resin (UL94V-0)/black
Contacts
Phosphor bronze/nickel base, gold plated (0.4 μm)
Brass/nickel base, gold plated
(0.4 μm)
Phosphor bronze/nickel base,
gold plated (1.4 μm)
Anchors
Zinc diecast/nickel plating
Anchors (tabs)
SUS
---
Cover
Straight connector: Soft PBT
resin (UL94V-0)/black
Right-angle connector:
TPC resin/black
---
Sealing resin
---
Epoxy resin
O-rings
Rubber
Grounding fixture
---
--Phosphor bronze/nickel base,
tin plated (2.0 μm)
---
Anchor cover
---
Nuts
---
---
SUS
Brass/nickel plated
-------
● Cables
Model
Standard Cables
Item
Compliant standard
UL CM
Category
Category 5e
Core/color
AWG22 (7/0.26):
Yellow · Orange · White · Blue
Outer diameter*1
6.5 dia.
Sheath color*2
Light blue
Sheath material
PVC
Shield structure
Double shield SF/UTP
Robot Cables
AWG22 (7/24/0.05):
Yellow · Orange · White · Blue
Shield Strengthening Cables
AWG22 (7/0.26):
Yellow · Orange · White · Blue
*2. Sheath.
Black
*1. Outer diameter.
Note. For the XS5H and XS5W, cables are available only with connectors attached.
11
XS5/XS6
Industrial Ethernet Cables
■ Dimensions
(Unit: mm)
● Cable with Plug on One End (M12 Straight)
XS5H-T421-@M0-K
Wiring
Terminal No.
Color
1
Yellow
2
White
3
Orange
4
Blue
L (cable length)
44.7
2
1
2
1
3
14.9 dia.
4
3
4
M12 × 1
(Plug)
● Cable with Plugs on Both End (M12 Straight/M12 Straight)
XS5W-T421-@M2-K
XS5W-T421-@M2-KR
Wiring
M12 straight
1
2
3
4
Shield
M12 straight
1
2
3
4
Shield
L (cable length)
44.7
44.7
1
4
3
4
3
14.9 dia.
14.9 dia.
1
1
2
2
3
2
4
3
4
1
M12 × 1
(Plug)
M12 × 1
● Cable with Plugs on Both Ends (M12 Straight/RJ45)
XS5W-T421-@MC-K
XS5W-T421-@MC-KR
2
(Plug)
Wiring
RJ45
1
3
2
6
Shield
M12 straight
1
2
3
4
Shield
L (cable length)
44.7
2
54.7
1
2
1
3
14.9 dia.
4
3
4
M12 × 1
(Plug)
RJ45
● Cable with Plug on One End and Socket on Other End (M12 Straight/M12 Straight)
XS5W-T421-@M1-K
XS5W-T421-@M1-KR
Wiring
M12 straight
1
2
3
4
Shield
M12 straight
1
2
3
4
Shield
L (cable length)
44.7
2
50.7
1
3
4
4 3
14.9 dia.
3
14.9 dia.
4
3
4
2
M12 × 1
(Plug)
M12×1
● Cable with Plug on One End and Socket on Other End (M12 Straight/RJ45)
XS5W-T421-@ME-K
M12 straight
1
2
3
4
Shield
L (cable length)
1
54.7
2
14.9 dia.
2
1
4
3
3
(Socket) M12 × 1
RJ45
12
1
(Socket)
Wiring
50.7
4
2
1
1
2
RJ45
1
3
2
6
Shield
XS5/XS6
Industrial Ethernet Cables
● Cable with Plug One End (M12 Right-angle)
XS5H-T422-@M0-K
Wiring
Terminal No.
Color
1
Yellow
L (cable length)
2
White
3
Orange
4
Blue
22.5
32.3
14.9 dia.
M12 × 1
4
3
2
4
1
1
3
2
(Plug)
● Cable with Plugs on Both Ends (M12 Right-angle/M12 Right-angle)
XS5W-T422-@M2-K
Wiring
M12 right angle
1
2
3
4
Shield
L (cable length)
22.5
22.5
32.3
M12 right angle
1
2
3
4
Shield
32.3
14.9 dia.
1
M12 × 1
M12 × 1
3
3
4
14.9 dia.
2
1
3
4
2
1
3
2
4
4
2
1
(Plug)
(Plug)
● Cable with Plugs on Both Ends (M12 Right-angle/RJ45)
XS5W-T422-@MC-K
L (cable length)
54.7
22.5
32.3
RJ45
14.9 dia.
M12 × 1
4
4
3
2
1
1
3
2
(Plug)
Wiring
M12 right angle
1
2
3
4
Shield
RJ45
1
3
2
6
Shield
13
XS5/XS6
Industrial Ethernet Cables
● Cable with Plugs on Both Ends (RJ45/RJ45)
XS5W-T421-@MD-K
XS5W-T421-@MD-KR
Wiring
RJ45
1
2
3
6
Shield
RJ45
1
2
3
6
Shield
L (cable length)
54.7
54.7
RJ45
RJ45
● Cable with Plugs on Both Ends (M12 Straight/M12 Straight)
Shield Strengthening Cable
XS5W-T421-@M2-SS
Wiring
M12 straight
1
2
3
4
Shield
M12 straight
1
2
3
4
Shield
L (cable length)
44.7
44.7
14.9 dia.
14.9 dia.
M12 × 1
M12 × 1
● Cable with Plugs on Both Ends (M12 Straight/RJ45)
Shield Strengthening Cable
XS5W-T421-@MC-SS
Wiring
M12 straight
1
2
3
4
Shield
L (cable length)
44.7
54.7
14.9 dia.
M12 × 1
14
RJ45
RJ45
1
3
2
6
Shield
XS5/XS6
Industrial Ethernet Cables
● RJ45 Assembly Connector
XS6G-T421-1
52.6
11.8
11.3
8.1
Contact 6
Contact 1
Contact 2
Contact 3
Applicable wires
Sheath outer diameter: 6.1 to 6.9 mm
Core size: AWG22 to AWG24 (stranded wires)
AWG22 to AWG23 (solid wires)
Insulation outer diameter: 1.6 mm max.
● M12 Connector for Panel Mounting
XS5P-T42@-5
XS5P-T426-5 (Rear Locking)
M12 × 1
PG9
2.8
17
18
Wiring
Color
1
Yellow
18
Orange
500
White
14.6 dia.
2
White
3
Orange
4
Blue
20
10±3
2.5
(Socket)
Terminal No.
(20)
Yellow
Blue
Panel Cutout Dimension
11.9
22.1
15.3 +0.1
0 dia.
XS5P-T427-5 (Front Locking)
M12 × 1
Panel thickness
t = 1 to 4
2.8
18
17
PG9
20
500
Orange
White
10±3
(Socket)
10.5
22.1
(20)
Blue
Yellow
2.5
● M12 Panel-mounting PCB Straight Terminals
XS5P-T426-1
Mounting Hole Dimensions
(D Cut Structure)
14
M12×1
B
2.5
5.3 +0.1
0
15
A
(Socket)
Mounting Hole Dimensions
10.6 +0.2
0
19.9
10.4
Pin No.
Note 1: The panel cutout dimension is the same for
Front-locking and Rearlocking Connectors.
Note 2: Rotational positioning is
not possible for connector rotation.
18
13.9 dia.
C
A
C
B
2.5
0.5 min.
1.2±0.04 dia. × 45°
1.2±0.04 dia. × 45°
2 to 3
2 to 3
16.5 dia. 14.6 dia.
3
12.2±0.05 dia.
12.2±0.05 dia.
Cross-section Diagram A-A
Cross-section Diagram C-C
0.5 min.
Cross-section Diagram B-B
Panel Processing Dimensions
5±0.05 dia.
45°±1°
5±0.05
Four, 1.2 +0.1
0 dia.
Three, 1.4 +0.1
0 dia.
1 +0.1
0 dia.
7.05±0.05
4.5±0.05
8.5±0.05
15
XS5/XS6
Industrial Ethernet Cables
■ Assembly Procedure
● RJ45 Assembly Connectors
XS6G-T421-1
1.
2.
● M12 Panel-mounting PCB Straight Terminals
XS5P-T426-1
Confirming the Number of Parts
Pass the cable through the cable
clamp and the connector housing
Strip the cable sheath and ground
braiding to the correct lengths.
3.
Follow the color codes and prepare
to insert the wires into the splice
piece.
4.
Insert the wires into the splice piece
for the length of the splice piece.
5.
6.
7.
The following four parts are included in the package when it is
delivered.
24 mm
13 mm
Panel-mounting Parts
1. Anchor
2. O-Ring
3. Nut
PCB-mounting Part
4. Connector
Assembly Procedure
1. Mount the connector to the PCB.
2. Attach the anchor to the panel with the nut.
Place the splice piece into the RJ45
data module and engage it.
Mounting the Connector to the PCB
Place the data module and the
splice piece on the IDC assembly
housing.
Mounting the Anchor to the Panel
Anchor
PCB
*Tightening torque: 1 N·m
Press the data module and the IDC
assembly housing together and use
pliers or a similar device to make
the insulation displacement contact.
8.
Remove the data module from the
IDC assembly housing.
9.
Place the upper screen plate on the
data module and press it over the
ground braiding of the cable.
Panel
Nut
3. Attach the connector that you mounted to the PCB to the panel.
* Make sure that the connector and anchor are oriented correctly.
Attachment
5 mm
10. Place the lower screen plate on the
bottom of the data module, align it
with the upper screen place, and
latch it until you hear it click into
place.
Align the flat surface on the anchor with
the grounding fixture terminal.
4. Temporarily mount the O-ring to the top of the connector at the
mating surface.
Temporary Mounting
of the O-Ring
11. Slide the housing that you placed
around the cable in step 1 up to the
data module and latch it until you
hear it click into place.
O-ring
12. Tighten the cable clamp.
Pin Assignments
Pin Assignments for Fast Ethernet 10/100 Mbps
Wire color
Function/Signal
Transmission Data+/TD+
Industrial
Ethernet
EIA/TIA
568A
EIA/TIA
568B
Pin No.
YE
WH/GN
WH/OG
1
Transmission Data-/TD−
OG
GN
OG
2
Receiver Data/RD+
WH
WH/OG
WH
3
Receiver Data/RD−
BU
OG
GN
6
5. Mate the Connector Waterproof Cover (XS2Z-22, sold separately) or the Partner Connector Plug (XS5H-T42@-@M0-K,
sold separately) and press the O-ring to the O-ring position
after mounting.
Mounting the O-Ring
O-Ring Position after Mounting
● Connector Waterproof Cover (Sold Separately)
XS2Z-22
* Tightening torque: 0.39 to 0.49 N·m
16
XS5/XS6
Industrial Ethernet Cables
■ Safety Precautions
Precautions for Correct Use
Do not use the Connectors in an atmosphere or environment that
exceeds the specifications.
● Connector Connection and Disconnection
• When connecting or disconnecting Connectors, be sure to
hold the Connectors.
• Do not hold the cable when disconnecting Connectors.
• When joining Connectors, be sure to insert the plug all the way
to the back of the socket before attempting to lock the Connectors.
• Do not use tools of any sort to join the Connectors. Always use
your hands. Pliers or other tools may damage the Connectors.
● Handling Precautions
• Do not pull on the Connectors or cables with excessive force.
Do not install the Connectors with a load placed directly on the
joint or at the point where the wires connect to the Connector.
The Connector may be damaged or the wires in the cable may
be disconnected.
• Lay the cable where it will not be stepped on to prevent the
wires in the cable from being disconnected and to protect the
Connectors from being damaged. If the cable must be placed
where it will be stepped on, install a protective cover.
• When bending cables, do not exceed the cable specifications.
● Wiring
Lay the cables so that external force is not applied to the Connectors. Otherwise, the degree of protection (IP67) may not be
achieved.
● Degree of Protection for M12/Smartclick Connectors
• The degree of protection of Connectors (IP67) is not for a fully
watertight structure. Do not use the Connectors underwater.
• Do not step on or place any objects on the Connectors. Doing
so may damage the Connectors.
17
OMRON Corporation
Industrial Automation Company
Authorized Distributor:
Kyoto, JAPAN
Contact: www.ia.omron.com
Regional Headquarters
OMRON EUROPE B.V.
Wegalaan 67-69, 2132 JD Hoofddorp
The Netherlands
Tel: (31)2356-81-300/Fax: (31)2356-81-388
OMRON ELECTRONICS LLC
2895 Greenspoint Parkway, Suite 200
Hoffman Estates, IL 60169 U.S.A.
Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark,
Singapore 119967
Tel: (65) 6835-3011/Fax: (65) 6835-2711
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200
© OMRON Corporation 2010-2017 All Rights Reserved.
In the interest of product improvement,
specifications are subject to change without notice.
CSM_9_3_0317
Printed in Japan
0317 (0710)
Cat. No. G019-E1-07
Download PDF