Matrix SETU VFXTH Brochure V1R5-Mar11 PDF

SETU VFXTH
Multi-Port VoIP-FXO-FXS Gateways
Modern organizations need access to omnipresent telecom
networks like PSTN and the new-age internet telephony for the
benefits of cost, convenience and quality. On the other hand,
modern organizations with IP infrastructure cannot remain
isolated from the PSTN. All such organizations need a multichannel, transparent and flexible VoIP to PSTN gateway.
Matrix presents SETU VFXTH - The multi-channel SIP gateway
offering seamless connectivity between VoIP and PSTN networks
through multiple FXS and FXO ports. Matrix SETU VFXTH offers
universal and transparent call routing irrespective of type of ports
VoIP-FXS, VoIP-FXO and FXS-FXO. Its superior call and signal
processing capabilities ensure unrestricted flow of multiple calls
with higher speed and better speech quality.
Let Matrix SETU VFXTH be your high-performance bridge to VoIP
and PSTN networks.
VoIP Gateways Built for
Speed, Traffic and Flexibility
SETU VFXTH is a family of multi-channel transparent and flexible
VoIP to FXS-FXO gateways. On VoIP side, it supports SIP based
IP interfaces allowing it to connect to any existing IP network.
On the PSTN side, it supports FXS and FXO interfaces. SETU
VFXTH supports universal routing that facilitate calls between
diverse port types. Further, intelligent Least Call Routing selects
the most economical call route based on the destination number
dialed on per call basis.
ports can be used with the enterprise PBX while the other
FXS/FXO ports can be interfaced with the PSTN for public calls.
SETU VFXTH offers extensive range of features including
Programmable Access Codes, Allowed and Denied Numbers,
Automatic Number Translation, CLI Based Routing, Emergency
Number Dialing, Least Cost Routing, Peer-to-Peer Calling and
CDR. On the network side it offers NAT/STUN, PPPoE, Fax over IP,
Syslog debug and other features.
SETU VFXTH can register with multiple SIP Servers and IPPBXs. Single SETU VFXTH can be used to interface with the
enterprise IP-PBX for internal calls and public ITSP SIP Servers
for international calls. Similarly on the PSTN side, few FXS/FXO
In summary, Matrix SETU VFXTH is one of the most flexible,
feature-rich and dependable VoIP-FXS-FXO Gateways in the
market.
SETU VFXTH CONFIGURATIONS
VoIP-FXO-FXS Gateways
Sr. No.
1.
2.
3.
Model Name
SETU VFXTH0808
SETU VFXTH1212
SETU VFXTH1616
Sr. No.
1.
2.
3.
4.
Model Name
SETU VFXTH0800
SETU VFXTH1600
SETU VFXTH2400
SETU VFXTH3200
VoIP Channels
16
24
32
FXO Ports
8
12
16
FXS Ports
8
12
16
VoIP-FXO Gateways
VoIP Channels
8
16
24
32
FXO Ports
8
16
24
32
VoIP-FXS Gateways
Sr. No.
1.
2.
3.
Model Name
SETU VFXTH0016
SETU VFXTH0024
SETU VFXTH0032
VoIP Channels
16
24
32
FXS Ports
16
24
32
SETU VFXTH APPLICATIONS
VoIP GATEWAY FOR TRADITIONAL PBX
SETU VFXTH helps an organization to integrate new communication technologies to its existing infrastructure. Using SETU VFXTH, a traditional
PBX system can connect to VoIP networks. With new networks being integrated, communication happens using the most cost-effective
networks. Features like Automatic Number Translation, Programmable Access Codes and host of other advanced functionality enable users to
access new networks without changing their dialing habits.
SETU VFXTH
IP
FXO/FXS
1 to 32
SIP Proxy
PSTN
TDM PBX
SETU VFXTH can be connected to a traditional PBX in two ways. Firstly, the FXS ports of SETU VFXTH can be connected to the FXO ports of the
PBX. On dialing prefix assigned in the PBX, the user can access these FXS ports to make VoIP calls. Secondly, the FXS port (SLT port) of the PBX
can be connected to FXO port of the SETU VFXTH. PBX users can access VoIP network connected to SETU VFXTH by dialing the FXS port
number of the PBX.
PSTN GATEWAY FOR IP-PBX
SETU VFXTH enables the IP-PBX users to make calls to the PSTN network. It assures users the most cost effective route of IP for all their calls to
PSTN till the last mile of termination.
IP-Phone
IP-Phone
SETU VFXTH
IP
PSTN
IP-PBX
Multiple Branches can be connected over IP network, reducing overall communication cost in-between the various branches of an
organization. SETU VFXTH gets registered to an IP-PBX as a client. Registering multiple gateways to a single IP-PBX, allow the IP-PBX users to
relay calls over IP. This also facilitates employees at one branch office to access the local PSTN connectivity of the other branch. This further
saves on inter-network toll charges.
MULTI-SITE CONNECTIVITY
A multisite connectivity can be established through the existing IP network. SETU VFXTH connects to existing infrastructure with its varied
interfaces. SETU VFXTH located at various branch offices can be registered to the IP-PBX at the head office. This extends the IP-PBX
connectivity to the various branch offices. SETU VFXTH can be connected to the local PSTN network via FXO interface. This allows all other
registered users of the IP-PBX to access the local PSTN network where the SETU VFXTH is installed, reducing the call cost significantly.
Branch Office 1
Head Office
SETU VFXTH
PSTN
FXO
IP-PBX
FXS1
FXS16
IP-Phone
IP-Phone
IP
Branch Office 3
SETU VFXTH
Branch Office 2
SETU VFXTH
FXO
FXS
FXS1
FXS32
PSTN
FXS
TDM PBX
SETU VFXTH alone suffices to provide connectivity to both Switched (PSTN) and VoIP networks, as in the case of branch offices 1 and 2. It also
supports direct connectivity of up to 32 TDM extensions. On the other hand, SETU VFXTH can be a bridge that connects an existing PBX system
to the IP network, as in the case of branch office 3.
KEY FEATURES
Allowed and Denied Numbers
Allowed and Denied Lists are used to restrict dialing of
long-distance and international numbers. A number is
blocked if its prefix matches with any entry in the Denied
Lists. On the other hand, a number is allowed to go
through if it matches with any entry in the Allowed List.
This provides flexibility of allowing only specific
numbers, blocking all others.
Network Port Parameters
HTML based GUI of SETU VFXTH provides a
configuration menu to program its network port
parameters to match the LAN addressing scheme of
the installation site. Parameters such as IP address,
subnet mask, connection type, etc. can also be
programmed through a telephone instrument
connected to the system.
Automatic Number Translation
This feature allows the Gateway to translate the number
string dialed by the user to a format compatible with the
network through which the call is to be routed. So, the
user can dial numbers freely without worrying about the
network through which the call will be routed.
Peer-to-Peer Calling
SETU VFXTH supports VoIP calls between two
locations without going through a proxy server. Fixed IP
addresses of various locations can be programmed in
the Peer-to-Peer table of the gateway to avail this
facility. The gateway supports 500 entries in the Peerto-Peer table. Numerical dialing codes can be defined
to simplify the calling between various locations.
Call Progress Tones and Rings
The gateway offers flexibility of programming call
progress tones and ring cadence to match the standards
of the country of installation. Country Specific Call
Progress tones like Dial Tone, Ring Back Tone and Busy
Tone, etc. can also be programmed.
Caller Line Identification and Presentation (CLIP)
SETU VFXTH can provide Caller Line Identification
Presentation (CLIP) on FXS ports. Analog CLIP
protocols such as DTMF, FSK ITU-T V.23 and FSK
Bellcore 202A are supported by the gateway.
CLI based Call Routing
A call can be routed to a fixed number from the CLI
presented on SETU VFXTH. When a call lands on the
network ports of the SETU VFXTH, it detects the CLI,
verifies the CLI and routes the call to the predefined
number.
Call Detail Record (CDR)
SETU VFXTH can store details of 2000 calls in its
memory. Call reports can be generated using filters like
source port, destination port, calling number, called
number, date, time and duration.
Day Light Saving
The Real Time Clock of the SETU VFXTH moves forward
or backward automatically in tune with the Day Light
Saving requirement of the country where it is installed.
The options like Week-Day-Month or Date-Month are
provided to move the clock forward and backward
automatically on the specified day, date and time.
Fax over IP (FoIP)
The Matrix SETU VFXTH user can send and receive Fax
over SIP account, when the FAX machine is connected to
the FXS port. The SETU VFXTH supports FoIP using T.38
Vocoder and Pass-Through.
FXO
The gateway offers FXO port to connect the PSTN
network and route incoming calls to VoIP network or the
extensions. It can also be used to connect extension of a
PBX to network two PBX over VoIP.
PIN Authentication
The gateway uses PIN Authentication to verify a caller's
identity before routing the call from one network to
another. It is an important feature that prevents
unauthorized usage.
Prefix to Domain Name Conversion
This feature enables the conversion of a numerical
code dialled by the user to a domain name. It helps the
SIP service provider to understand and route the call to
the required destination.
Remote Held/Transfer
The user of SETU VFXTH can keep a called person at
remote end on hold or even transfer the call to a third
person. This feature can be activated only if the device
at the called end supports Call Hold/Call Transfer
feature.
SIP Accounts
A maximum of 32 SIP accounts can be programmed
and each FXS user can be assigned one of the SIP
accounts for outgoing calls. Dynamic allocation of SIP
accounts is also possible using the Dial Plan. These
SIP accounts can be from multiple service providers or
all from a single service provider.
Universal Routing
Universal Routing allows the gateway to route a call
received from one network to another based on the
routing mechanism programmed in the system. A
source port can be programmed for more than one
destination ports so that if one port is busy, the call can
be routed through another port.
VLAN Tagging
A Virtual Local Area Network (VLAN) may be defined as
a group of LANs that have different physical
connections, but which communicate as if they are
connected on a single network segment. VLANs
increase overall network performance by grouping
users and resources that communicate most
frequently with each other.
Web Based Programming
Matrix SETU VFXTH incorporates Built-in HTTP server
and web pages for easy configuration. This Web based
programming feature allows a user to configure the
gateway from any part of the world, once connected to
the IP network
TECHNICAL SPECIFICATIONS
FXS Port Parameters
Signalling
: Loop Start
Connector
: RJ11
Off Hook AC Impedance
: 600Ω/900Ω/Complex
Number of Long Loop Extension : 4
Loop Limit
: 1800 (Max)
Excluding Telephone set
On-Hook Voltage(Tip/Ring)
: -48V
Off Hook Current
: 25mA (Max)
Ringing Voltage
: Trapezoidal 60VRMS/25Hz
and Sinusoidal
2VRMS/25Hz
REN
:3
Dialling
: DTMF and Pulse
(10 PPS and 20 PPS)
DTMF Detection
: ITU-T Q.24
CLI Presentation
: DTMF, FSK ITU-T V.23 and
FSK Bellcore 202
Protection
: Over Voltage Secondary
Protection
Return Loss
: >18dB
Longitudinal Balance
: >50dB
Transmission Level Adjust
: Tx Gain: -3dB to +6dB,
Rx Gain: -3dB to +6dB
FXO Port Parameters
Signalling
Connector
Off Hook AC Impedance
Loop Limit
Pulse Dialling
DTMF Dialling and Reception
CLI Reception
Protection
Return Loss
Longitudinal Balance
Transmission Level Adjust
Call Maturity
VoIP Port Parameters
VoIP Protocols
Network Protocol
SIP
NAT
Voice CODECS
Line Echo Cancellation
Call Progress Tones
Voice
Fax
Quality of Service
Data Network
Security
Physical Connector
Power Supply
Input
Power Consumption
Connector
LED Indications
: Loop Start
: RJ11
: 600Ω/900Ω/Complex
: 1200Ω
: 10 PPS and 20 PPS
: ITU-T Q.23 and Q.24
: DTMF, FSK ITU-T V.23 and
FSK Bellcore 202
: Over Voltage and Over
Current Secondary Protection
: >18dB
: >50dB
: Tx Gain: -15dB to +10dB
: Rx Gain: -15dB to +10dB
: Delay and Polarity Reversal
: SIP v2, SDP, RTP
(RFC 2833)
: IPv4,TCP, UDP, DHCP, SNTP
STUN, HTTP
: 32 SIP Accounts Out Bound
Proxy Support
: STUN and NAT Keep Alive
: G.711 A-Law, µ-Law,
G.723.1, G.729A, G.729B,
GSM-FR, GSM-EFR
: G.168 with 128ms Tail
Length
: Dial Tone, Ring Back Tone,
Busy Tone, Error Tone
: Dynamic Jitter Buffer
(Adaptive), Comfort Noise
Generation and Voice
Activity Detection
: T.38 and Pass-Through
: Layer 3 DiffServ and ToS
: WAN Port RJ45 Auto MDIX
10/100 BaseT
: Password Protected
Administration
: RJ45
: 24VDC @2.5A
: 60 Watts
: DC Power Jack
: 1 GREEN Color LED for
Power, 1 Dual Color LED for
Status, 32 Single Color
LEDs for each Port
Mechanical
Dimensions (WxHxD)
Unit Weight
Shipping Weight
Material
Installation Mounting
Environmental
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
: 40.7 X 5.1 X 17.2 cm
(16.0” X 2.0” X 6.8”)
: 1.610 Kg (3.54 Lbs) Approx
: 2.570 Kg (5.66 Lbs) Approx
: Aluminium 1.5mm Powder
Coated
: Table-Top, Wall and
Rack Mount
: -10°C to +50°C
: -40°C to +85°C
: 5-95% RH (Non-Condensing)
: 0-95% RH (Non-Condensing)
FEATURES LIST
Ÿ Allowed and Denied Numbers
Ÿ Attended/Blind Call Transfer
Ÿ Automatic Number Translation
Ÿ Answer and Disconnect Signaling on FXS Port
Ÿ Answer and Disconnect Supervision on FXO Port
Ÿ Call Detail Record
Ÿ Call Progress Tones
Ÿ Caller Line Identification and Presentation (CLIP)
Ÿ Conference
Ÿ CLI on FXS Port
Ÿ CLI based Authentication
Ÿ Date and Time Settings
Ÿ Day Light Saving Mode
Ÿ Default the Configuration (System Default)
Ÿ Destination Number Determination Method
Ÿ Destination Port Determination Method
Ÿ Digest Authentication
Ÿ Do Not Disturb
Ÿ Dynamic DNS
Ÿ Emergency Number Dialing
Ÿ Fax over IP (T.38 and Pass-Through)
Ÿ Hotline
Ÿ MAC Cloning
Ÿ NAT and STUN Support
Ÿ PCAP Trace
Ÿ Peer-to-Peer Calling
Ÿ PIN Authentication
Ÿ PPPoE
Ÿ Prefix to Domain Name Conversion
Ÿ Programmable Access Codes
Ÿ Remote Held (SIP Accounts Only)
Ÿ Remote Transfer (SIP Accounts Only)
Ÿ Speech Gain Setting
Ÿ Supplementary Services
- Call Forward
- Call Hold
- Call Waiting
Ÿ System Log Client
Ÿ VLAN Tagging
Ÿ Web based Programming
VoIP PRODUCTS FROM MATRIX
The IP-PBX with Universal Connectivity and Seamless Mobility
All-in-One Embedded IP-PBX Server
High-Density SIP Gateway
The Universal Telephony Gateway
Multi-Port SIP based VoIP to GSM-FXO-FXS Gateway
Multi-Port SIP based VoIP to GSM and BRI Gateway
SIP based VoIP to T1/E1 PRI Gateway
Multi-Port SIP based VoIP to BRI Gateway
Multi-Port SIP based VoIP to FXO-FXS Gateway
Multi-Port SIP based VoIP to FXS Gateway
SIP based Analog Telephone Adaptor with 1 FXS, 1 GSM and 2 Ethernet Ports
SIP based Analog Telephone Adaptor with 1 FXO, 1 FXS and 2 Ethernet Ports
SIP based Analog Telephone Adaptor with 2 FXS Ports and 2 Ethernet Ports
SIP based Analog Telephone Adaptor with 1 FXS Port and 2 Ethernet Ports
The High-Definition IP-Phone with 6 Lines x 24 Characters LCD Display and PoE
The High-Definition IP-Phone with 2 Lines x 24 Characters LCD Display and PoE
The High-Definition IP-Phone with 6 Lines x 24 Characters LCD Display
The High-Definition IP-Phone with 2 Lines x 24 Characters LCD Display
An ISO 9001 Company, Matrix is a leader in Telecom and Security solutions for modern businesses and enterprises. An
innovative, technology driven and customer focused organization; the company is committed to keep pace with the
revolutions in the telecom and security industries. With around 30% of its human resources dedicated to the development of
new products, Matrix has launched cutting-edge telecom products like IP-PBX, Universal Gateways, VoIP Gateways and
Terminals, GSM Gateways, Access Control and Time-Attendance Systems and Fire Alarm Systems. These solutions are
feature-rich, reliable and conform to the international standards. Having global foot-prints in Asia, Europe, North America,
South America and Africa through an extensive network of more than 500 channel partners, Matrix ensures that the products
serve the needs of its customers faster and longer. Matrix has gained trust and admiration of more than 150,000 customers
representing the entire spectrum of industries. Matrix has won many awards for its innovative products.
MATRIX COMSEC PVT. LTD.
394-GIDC, Makarpura,
Vadodara-390010, India.
Phone: +91 265 2630555
Fax: +91 265 2636598
Email: Inquiry@MatrixComSec.com
SMS ‘MATRIX’ to +91 99987 55555
www.MatrixComSec.com
V1.R5-Mar ‘11
ETERNITY IP-PBX
SAPEX
VYOM CCX
ETERNITY
SETU VGFX
SETU VGB
SETU VTEP
SETU VBR
SETU VFXTH
SETU VFX
SETU ATA211G
SETU ATA211
SETU ATA2S
SETU ATA1S
SETU VP248PE
SETU VP248SE
SETU VP248P
SETU VP248S
Download PDF