Camera Mounts
CCUFM-M-K
CCUFM-BS1-M-K
K
Magnetic Base
Camera Flex Mount
The CCUFM-M-K Universal Flex
Mount can be used with most
cameras and can support a combined
camera lens weight of 3 lbs. It is
designed to be used primarily as
a temporary mount and can be
attached to any flat steel surface by a
magnetic base with an 80 lb. straight
pull. With no drilling or fastening
hardware required, this simple,
lightweight mount assures quick and
easy installation. The
unit is furnished with a steel tether
cable to prevent the camera from
falling. Due to its flexibility and
maneuverability this mount allows
the camera and lens to be placed at
practically any angle.
Magnetic Base
Camera Tilt Mount
w/ Ball Socket Head
FE ATURES AND ADVANTAGES
N
N
N
Quick and easy installation and removal
Tether cable prevents camera from falling
Unlimited camera positioning
The CCUFM-BS1-M-K is a short version
of the CCUFM-M-K with a BS-1 ball
socket camera mounting head. Designed
primarily to support camera installations
for ATM machines, it can be used with
most cameras and will hold a
combined camera lens weight of 20
lbs. It can be attached to any flat steel
surface by a magnetic base with an
80 lb. straight pull. With no drilling or
fastening hardware required, this simple,
lightweight mount assures quick and
easy installation.
FE ATURES AND ADVANTAGES
N
N
N
Low profile designed for ATM surveillance use
Quick and easy installation and removal
Swivel head ball socket
SPECIFICATIONS
SPECIFICATIONS
Application: Temporary camera mount
Dimensions: Approximately 8-1⁄2" long
Material: Flexible ABS plastic segments with 80 lb.
rated magnetic base
Maximum recommended load: Can support
camera/lens weight up to 3 lbs.
Color & Finish: Black
Application: Temporary camera mount
Dimensions: Approximately 4" long
Material: ABS plastic segments with 80 lb. rated
magnetic base
Maximum recommended load: Can support
camera/lens weight up to 20 lbs.
Color & Finish: Black
BS-1
K
CCUFM-C-K
22
K
Clip Base Camera
Flex Mount
1" Swivel Head
Ball Socket Mount
The CCUFM-C-K Universal Flex
Mount can be used with most
cameras and can support a
combined camera lens weight of
3 lbs. It is designed to be used
primarily as a temporary mount
and can be attached to countless
locations by its heavy duty spring
clip base. With no drilling or
fastening hardware required, this
simple, lightweight mount assures
quick and easy installation. The
unit is furnished with a steel tether
cable to prevent the camera from
falling. Due to its flexibility and
maneuverability this mount allows
the camera and lens to be placed at
practically any angle and is workable
on many unusual surfaces.
The BS-1 is a universal head ball socket
designed for tamper-resistant mounting
of cameras. The mount head is
adjustable from a level position to a tilt
angle of 90°. The mounting head will
rotate 360° and lock in any position with
an Allen set screw. The socket can be
adapted to almost any equipment that
requires a wide range of movement by
removing the washers and a hardened
steel stud.
FE ATURES AND ADVANTAGES
N
N
N
Quick and easy installation and removal
Tether cable prevents camera from falling
Unlimited camera positioning
SPECIFICATIONS
Application: Temporary camera mount
Dimensions: Approximately 8-1⁄2" long
Material: Flexible ABS plastic segments with a
steel spring clip
Maximum recommended load: Can support
camera/lens weight up to 3 lbs.
Color & Finish: Black
1-800-628-5858
www.EMISecurity.com
K
FE ATURES AND ADVANTAGES
N
N
Wide adjustment range
Tamper-resistant
SPECIFICATIONS
Application: Indoor camera mount
Dimensions: 1" high
Material: Aluminum
Maximum recommended load: 20 lbs.
Color & Finish: Black
Download PDF