TV/SCART
OPEN/CLOSE
WARNING
To reduce the risk of fire or electric shock, do not expose this
equipment to rain or moisture.
Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user to avoid the risk of
electric shock, do not disassemble this equipment by anyone
except a qualified service personnel.
This symbol is intended to alert the user to the presence
of important operating and maintenance instructions
in the literature accompanying the appliance.
Invisible laser radiation when open and interlocks defeated.
avoid exposure to beam.
CAUTION
CAUTION
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
LCD TV User Guide
Safety Instructions
MAINS PLUG WIRING
Electrical Information
This appliance is fitted with a BS1363/A 13 amp plug. If it is not suitable for your supply
sockets it must be removed and replaced with an appropriate plug. If the plug becomes
damaged and/or needs to be replaced please follow the wiring instructions below. The
plug removed must be disposed of immediately. It must not be plugged into a supply
socket as this will be an electrical hazard. If the fuse needs to be replaced it must be of
the same rating and ASTA approved to BS1362. If the plug is changed, a fuse of the
appropriate rating must be fitted in the plug, adapter or at the distribution board. If the
fuse in a moulded plug is replaced, the fuse cover must be refitted before the appliance
can be used.
Wiring Instructions
The supply cable will be either 2-core or 3-core. Follow the appropriate wiring
instructions given below. In both cases ensure that the outer sheath of the cable is
firmly held by the cable clamp.
2- CORE
Fuse
BLUE
(Neutral)
Cable
clamp
BROWN
(Live)
3- CORE
The wire coloured blue must be connected to the
terminal marked with the letter N or coloured
black.
The wire coloured brown must be connected to
the terminal marked with the letter L or coloured
red.
WARNING! This appliance must be earthed.
The wire coloured green and yellow must be
connected to the terminal marked with the letter E,
or by the earth symbol, , or coloured green or
green and yellow.
GREEN and
YELLOW
(Earth)
Fuse
BLUE
(Neutral)
Cable
clamp
WARNING! Do not connect either wire to
the earth terminal.
This symbol indicates that this 2-core appliance
is Class II and does not require an earth
connection.
LCD TV User Guide
BROWN
(Live)
The wire coloured blue must be connected to the
terminal marked with the letter N or coloured black.
The wire coloured brown must be connected to the
terminal marked with the letter L or coloured red.
Do not attempt to service the equipment yourself.
Opening and removing the covers may expose you to dangerous
voltage or any other hazards and may void your warranty.
Refer service from qualified personnel.
Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS
Do not place or drop any other objects on top.
Do not insert anything into the ventilation holes of your equipment.
Inserting any metal or flammable objects may result in fire or
electric shock.
Do not place the equipment on uneven or unstable, stands,tables, shelves etc..
The equipment may fall, causing serious injuries to children or adults and serious
damages to the equipment itself.
Always place the equipment on the floor or on a surface that
is sturdy, level, stable and strong enough to support
the weight of the equipment.
Do not block any ventilating openings, leave an open space around the equipment.
Never place the equipment :
on a bed, sofa, rug, or any other similar surfaces;
too close to drapes/curtains/walls, in a bookcase,built-in cabinet,
or any other similar places that may cause poor ventilation.
Always remove the cord from the outlet before cleaning the equipment.
Never use cleaners, harsh or abrasive chemicals or solvents on the
equipment. Clean only with a dry, soft, lint-free cloth.
LCD TV User Guide
Safety Instructions
WARNINGS
●
●
●
●
●
●
●
●
Unqualified attempts to repair this TV are not allowed. Refer repairs to this unit
to a qualified technician only.
Do not disassemble this unit. There are dangerous-voltage parts inside that may
cause electric shock even after power is disconnected.
Store your unit in a clean, dry environment, Unplug the unit immediately it gets
wet, and consult your servicing technician.
Always unplug the unit before cleaning it. Wipe dust off the cabinet of the unit
with clean & dry & soft cloth. Apply non-ammonia cleansing lotion onto the cloth,
not directly onto the screen.
Do not place heavy objects on top of the unit.
Avoid exposing your unit directly to sunlight or other heat sources.
Put your unit in a well-ventilated area away from high humidity.
Do not expose this TV to rain or moisture, dripping or splashing.
Safety Tips
● If smoke, abnormal noise or odour comes out of your unit, unplug from the
mains supply immediately and call your dealer.
● Never try to repair the your unit on your own. Always call your dealer
for repairs.
Note
This user’s manual contains for-reference-only graphics and information that are
subject to change without notice.
WEEE:
This appliance is labelled in accordance with European Directive 2002/96/EG
concerning used electrical and electronic appliances(waste electrical and electronic
equipment - WEEE). The guideline determines the framework for the return and
recycling of used appliances as applicable throughout the EU.
LCD TV User Guide
CONTENT
..............................................................................................................
CONTENT
PREPARATION
6
Features ............................................................................................................................................................... 6
Package Contents ............................................................................................................................................... 7
LCD TV .................................................................................................................................................................. 8
Front View ............................................................................................................................................................. 8
Side View...................................................................................................................................................................9
Rear View .............................................................................................................................................................. 10
Remote Control ....................................................................................................................................................... 11
Setting up your LCD TV............................................................................................................................................ 14
Using your LCD TV............................................................................................................................................... 15
INSTALLATION
...........................................................................................................
16
Connecting a TV Cable or Aerial....................................................................................................................... 16
Connecting a DVD Player .................................................................................................................................. 17
Connecting a VCR & a Video Camera .............................................................................................................. 18
Connecting a TV Box and Satellite Receiver ..................................................................................................... 19
Connecting an Audio Receiver...............................................................................................................................20
HDMI...............................................................................................................................21
USING THE FEATURES................................................................................................. 22
Basic Operation................................................................................................................................................. 22
OSD Menu Operation .......................................................................................................................................... 23
Video .................................................................................................................................................................. 23
Audio.................................................................................................................................................................... 24
Setup................................................................................................................................................................
25
Preferences........................................................................................................................................................... 26
Screen................................................................................................................................................................... 26
Using the Built-in DVD........................................................................................................................................... 27
Using the Card Reader & USB .............................................................................................................................. 28
Advanced Operations........................................................................................................................................... 30
MP3/WMA Playback............................................................................................................................................. 30
Picture CD Operations.......................................................................................................................................... 31
MPEG4 Operations...... ........................................................................................................................................ 32
Using the DVD Features..................................................................................................................................... 33
TROUBLESHOOTING...................................................................................................
37
SPECIFICATIONS...........................................................................................................
38
LCD TV User Guide
PREPARATION
Features
VGA Support:
640x480/60Hz~1024x768/75Hz
Multimedia socket
VIDEO in socket
PREPARATION
S-VIDEO in socket
SCART socket (RGB, CVBS ,CVBS+RGB,Y/C input)
Y Pb Pr in socket
VGA in socket
HDMI in socket
DVD COAXIAL OUT socket (DVD SPDIF OUT)
WSS (Wide Screen Scale ) Function
This function can automatically convert and display any aspect ration (4:3 / Wide) TV
broadcast signal.
Teletext Function
NICAM/ FM-Stereo Function
Auto Programme Sort (APS)
Manual search
Sleep-Timer
User selectable colour temperature settings
Built-In CATV tuner
Card Reader Function
Slot-type DVD Player
Built-In USB
PREPARATION
Package Contents
Once you open the box, make sure all of the following contents are
included.If you’re missing any items, please contact your dealer.
PREPARATION
LCD TV
TV/SCART
CH.
1
2
4
5
3
6
VOL.
7
8
9
BACK
+10
SLEEP
0
DVD
SEARCH
OPEN/CLOSE
SKIP
PLAY/PAUSE
EXIT
STOP
MENU
INFO
SOURCE
CH. LIST
P.SIZE
USB/CARD AUDIO
ZOOM
GO TO
SUBTITLE TITLE
SETUP DVD MENU
I-II
FAST TEXT
Remote control/
AAA batteries
Power Cord
Video Cable
Audio Cable
User Guide
(you are reading it)
These items are all you need to set up and operate the LCD TV
in its basic configuration.
*Most devices (VCRs, DVD player, etc.) come with the necessary
cable for connection. If you want to set up a complex system, you may need to buy
extra cable, connector, etc.
PREPARATION
LCD TV
PREPARATION
Front View
IR
Infrared Receiver
LED
The LED light indicates when the LCD
TV is activated (Red = standby, Green
On).
Power Button
Turns the LCD TV on and off.
HEADPHONE
Connects to the external
headphone for private listening.
SOURCE
Press to select different input signal sources.
MENU
Press once to display the OSD (on screen
display), press again to turn the OSD off.
CH.▲▼
Changes TV channels. Selects menu item when
in the OSD mode.
VOL. -+
Adjusts the volume up and down. Change values for
items when in the OSD mode.
Note:
Source button on the TV, has the same function of OK button on the remote control,
can be used as confirm button.
PREPARATION
LCD TV
Side View
PREPARATION
ITEM
DESCRIPTION
1 SLOT-TYPE DVD PLAYER
Any of the following disc types are playable on the DVD player:
CD-R, CD-RW, DVD-R, DVDRW, MP3, VCD, SVCD,DVD+R, or DVD+RW
( DVD mode )
2 USB
Allows the insertion of a USB disk, You can view digital images / movie or
etc playout on your TV. ( DVD mode )
3 CARD READER
Allows the insertion of a SD/MMC card. You can view digital images or movie
playout for MPEG1/MPEG2 on your TV. ( DVD mode )
4 PLAY/PAUSE
Press to start playback or pause. ( DVD mode )
5 OPEN/CLOSE
Press to open and close the disc tray. ( DVD mode )
To View USB or SD/MMC card you must select DVD mode then attach/insert USB cable
or an SD card into the slots provided Card. Using the remote controller navigation (arrow
buttons) and SELECT button select the file shown on the TV screen to view the Card or
USB information. Use the arrow / navigation buttons to rotate any jpeg picture.
PREPARATION
LCD TV
Rear View
HDMI
PREPARATION
DC 12V IN
7
6
8
HDMI
DC 12V IN
VHF/UHF IN
IAL
P
ITEM
DESCRIPTION
1. DC IN
Connect the DC power cord to this socket.
2. RF/ANT.
Connect TV aerial here.
3. AV1
SCART
Connect to external equipment with SCART socket. This SCART
input allows audio and CVBS / YC / RGB / CVBS+RGB, S-VIDEO
from an external device to display on you TV.
4. AV2 S-VIDEO
AUDIO(L/R)
Connect to the S-VIDEO output sockets and Audio output sockets
on your video equipment.
5. AV3
VIDEO/AUDIO(L/R)
Connect to the composite A/V output sockets on your video
equipment.
6. AV4 Y, Pb, Pr/
AUDIO(L/R)
Connect to the component ( Y, Pb, Pr ) video sockets and audio
( L/R ) sockets of your DVD player, HDTV, or video equipment.
7. AV5 VGA IN/PC
AUDIO IN
Connect to a PC or other devices with a VGA interface.
8 AV6 HDMI
Connect to devices with a HDMI interface.
9. Coaxial
Connect to DVD coaxial socket on external digital audio equipment. ( only
for DVD mode )
Note: S-VIDEO and Video have a common audio input. If both devices are being used at the
same time, both audio-ins will be heard at same time.
10
PREPARATION
Remote Control
1
POWER
Turns the LCD TV on and into standby mode .
2
3
2
TV/SCART
1
Mutes and restores your LCD TV sound.
3
TV/SCART
Pressing enter TV or SCART Mode.
4
6
0-9
Select and switch to a channel by
using 0-9 buttons.
5
BACK/ +10
11
Returns to previously selected channel. (For TV)
Press this button twice to select song number
when the number over 9. ( DVD mode )
CH. +/-
7
8
9
10
OPEN/CLOSE
13
12
14
Changes the channels up and down .
7
PREPARATION
5
6
4
VOL. +/Increases and decreases volume.
8
9
SLEEP
Sets the LCD TV sleep time.
- Press the SLEEP button to select the number of
minutes. followed by 15, 30, 60minutes and off.
The timer begins to count down from the number
of minutes selected.
a.To check the remaining sleep time, press the
SLEEP button once.
b.To cancel the sleep time, repeatedly press the
SLEEP button until the display off appears.
c. If you turn the set off after setting the sleep
timer, the setting will be erased.
SKIP
OPEN/CLOSE
Press to skip to the beginning of the currently
played chapter(track). ( DVD mode )
Press to skip to the beginning of the next
chapter (track). ( DVD mode )
12
Press to open and close the disc tray.
( DVD mode )
SEARCH
10
STOP
13
Use to advance or reverse playback rapidly.
Press to stop playback.(DVD mode)
(DVD mode )
PLAY/PAUSE
11
/
Press to start playback or pause.
( DVD mode )
14
EXIT
Exits the OSD menu (on-screen display).
PREPARATION
11
Remote Control
15
TV/SCART
16
17
Allows you to move, select and set up
the OSD options.
OK
INFO
Pressing once displays a variety of information such
as the current channel and the input source.
Browse the disc’s information. (DVD mode)
PREPARATION
18
Cycles among the different input signal sources:
TV DVD
AV1(SCART) AV2(S-VIDEO) AV3(CVBS) AV4(Y Pb Pr)
AV5(VGA) AV6(HDMI)
OPEN/CLOSE
19
Turns on and off the Teletext function.
I-II(NICAM)
Cycles through the TV Sound options:
MONO/DUAL/STEREO.
CH.LIST
Display all channel list .
P.SIZE
Cycles through wide mode settings:
In TV/SCART/S-VIDEO/VIDEO mode: Wide, 4:3, Zoom, Original.
In Y,Pb,Pr/VGA mode: Wide, 4:3.
In HDMI mode, “P.SIZE” function is not available.
20
/ USB/CARD
Displays the main index in Teletext mode.
Press this button switch DVD/CARD READER /USB.
(DVD mode)
/ AUDIO
Reveals hidden information such as the answer to a
quiz in Teletext mode.
Change the audio language or audio channel.
(DVD mode)
/ ZOOM
Freezes a multi-page passage on screen in Teletext
mode.
Zoom in /zoom out the displayed frame.
(DVD mode)
/ GO TO
Displays the top ,bottom or all of page, to easily
read in Teletext mode.
Play from the desired location. (DVD mode)
12
PREPARATION
21
Accesses the TELETEXT items or
corresponding pages.
SUBTITLE
Press to change subtitles when the disc
being played contains several subtitles.
TITLE
Press the button to display the DVD title
content.
SETUP
Press to call up setup menu screen.
DVD MENU
Press the button to display the DVD disc
menu.
Remote Control
Installing the batteries in your remote control
1
3
Insert two AAA size batteries.
Make sure to match the (+) and (-) ends of
the batteries with the (+) and (-) ends indicated
in the battery compartment.
PREPARATION
2
Pull the tab of the back cover and pull up on
the cover to open the battery compartment
of the remote control.
Align the lower tabs of the back cover to the
remote control and squeeze the cover into
place.
Note :
Do not use caustic cleaners( porcelain, stainless steel, toilet, or oven cleaner, etc...).
You may cause damage to your remote control.
Effective range
Your remote control can be activated from up to the LCD TV 5m away,
if points directly in front of the device.
30 O
30 O
5M
PREPARATION
13
Setting Up Your LCD TV
How to install the TV Stand
Follow the instructions below to install the TV stand:
PREPARATION
1
Open the box, and make sure all necessary parts are in the box.
LCD TV
2
Stand
Cover an even stable surface with a soft cloth. Place the LCD TV unit face-down on the cloth. Fit
the stand onto the bottom of the LCD TV unit as shown:
HDMI
3
Then push until stand clicks into the LCD TV’s stand socket.
HDMI
14
PREPARATION
Using your LCD TV
1
The Power button on the front panel and also on the remote control is only used
for powering up and switching the TV to standby mode,it does not disconnect
the device from the mains supply.
To completely disconnect the main voltage, please switch off the power switch
on the rear of the TV, or remove the power plug from the socket.
PREPARATION
HDMI
DC 12V IN
POWE R
Unplug from a wall
outlet
DC IN
PREPARATION
15
INSTALLATION
Refer to the owner’s manual of the external equipment to be connected.When connecting
external equipment, do not connect any AC power cords to wall outlets until you have completed
all the connections.
Connecting a TV aerial
Basic Connection: Connecting cable or aerial .
HDMI
DC 12V IN
Unplug from a wall
outlet
TV Aerial
INSTALLATION
DC IN
Aerial/75-ohm
coaxial input
1
Connect your existing TV aerial to the Aerial input socket on the TV.
2
Insert the supplied mains cable to the mains socket located on the rear of
the TV. Connect the other end of this cable to a 3 pin mains socket.
3
Connect all AC power sources before turning on the
power switch at the back of the TV.
4
Press the POWER button on your remote to turn on your LCD TV.
5
16
Press the TV/SCART button to enter TV mode when it is not in TV mode or to enter
SCART source while it is in TV mode.
INSTALLATION
Connecting a DVD Player
For best picture quality, if your DVD player has (Y Pb Pr) video output, Please use component
cable instead of a standard video or S-video cable (cables not supplied). Otherwise connect
using a standard Scart cable (not supplied).
HDMI
Video
A
Audio Audio
(R)
( L)
Pr
B
Pb
D
Video/Audio Cable
C
1
METHOD A (AV2)
Use an Audio cable to connect the DVD’s audio output sockets to your LCD TV.
Use a S-Video cable to connect your LCD TV and DVD player.
METHOD B (AV3)
Use an A/V cable to connect the DVD’s composite output sockets to your LCD TV.
METHOD C (AV1)
Use a SCART cable to connect the DVD’s SCART socket to the LCD TV’s SCART socket.
INSTALLATION
DVD PLAYER
METHOD D (AV1)
Use a Component cable to connect the ( Y Pb Pr ) sockets on the DVD player to your LCD TV.
Use an audio cable to connect the DVD’s audio sockets to your LCD TV.
2
Connect all power sources before turning on the LCD TV or other connected equipments.
3
Press the POWER button to turn on your LCD TV.
4
To watch DVD, press the SOURCE button to select AV1,AV2, AV3,AV4.
INSTALLATION
17
Connecting a VCR & a Video Camera
HDMI
A
Video
Audio Audi o
(R)
(L )
B
INSTALLATION
Video/Audio Cable
1
2
3
4
5
C
METHOD A (AV2)
Use an Audio cable to connect the VCR’s/ the Video Camera’s audio output
sockets to your LCD TV.
Use a S-Video cable to connect your LCD TV and VCR player/ video camera.
METHOD B (AV3)
Use an A/V cable to connect the VCR’s/ video camera’s composite output sockets
to your LCD TV.
METHOD C (AV1)
Use a SCART cable to connect the VCR’s SCART socket to the LCD TV ‘s SCART socket.
Connect all power sources before turning on the LCD TV
or other connected equipments.
Press the POWER button to turn on your LCD TV.
To watch video camera, press the SOURCE button to select AV2 or AV3.
To watch VCR, press the SOURCE button to select AV1, AV2 or AV3 .
Note: Not all cameras have the ability to connect to a TV. Please check your video camera
user guide for compatibility.
18
INSTALLATION
Connecting a TV Box and Satellite Receiver
Video
A
Audio Audio
(R)
(L)
B
C
Video/Audio Cable
VGA CABLE
1
Pb
Pr
E
D
Method A ( AV2 ) :
Method B ( AV3 ) :
Use an A/V cable to connect the Satellite Receiver’s / TV Cable Box’s composite output
sockets to your LCD TV.
Method C ( AV5 ) :
Use a VGA 15 pins cable to connect the Satellite Receiver’s / TV Cable Box’s RGB output
sockets to your LCD TV.
Use a 3.5 mm socket to RCA adapter cable for connecting audio.
INSTALLATION
Use an Audio cable to connect the Satellite Receiver’s / TV Cable Box’s audio output sockets to
your LCD TV.
Use a S-Video cable to connect your LCD TV and Satellite Receiver’s / TV Cable Box.
Method D ( AV1 ) :
Use a SCART cable to connect the Satellite Receiver’s / TV Cable Box’s SCART socket to the
LCD TV’s SCART socket.
Method E ( AV4 ) :
Use a Component cable to connect the Y/Pb/Pr sockets on the Satellite Receiver’s / TV Cable
Box to your LCD TV.
Use an Audio cable to connect TV ca ble box’s audio output sockets to LCD TV.
Method F ( AV6 ) :
2
3
4
5
Use a HDMI cable to connect the Satellite Receiver HDMI connector to your LCD TV.
Connect all power sources before turning on the LCD TV or other connected equipments.
Press the POWER button to turn on your LCD TV.
To watch TV cable box, press the SOURCE button to select AV1, AV2, AV3, AV4 ,AV5.
To watch programs satellite receiver, press the SOURCE button repeatedly to select AV6 .
INSTALLATION
19
Connecting an Audio Receiver
For best Sound quality, you may want to play the LCD TV audio through your Dolby
digtal surround system system.
HDMI
Dolby digital
INSTALLATION
amplifier
20
1
Use an audio cable to connect the audio receiver’s audio LINE IN sockets to LCD TV ‘s
DVD COAXIAL OUT sockets.(only for DVD mode)
2
Connect all power sources before turning on the LCD TV or other connected equipments.
3
Press the POWER button to turn on your LCD TV.
INSTALLATION
HDMI
HDMI
-This TV can accept High-Definition Multimedia Interface(HDMI) .
-This TV SET supports HDCP(High-bandwidth Digital Content Protection) Protocol for TV SET
(480p, 720p, 1080i) modes.
-When you connect to the output of an HD ready player (DVD Player, Set Top Box or PC) switch to the
AV6(HDMI) function and the TV will automatically detect the resolution used by the HDMI source.
- To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p.
- To get the best picture quality, adjust the PC graphics card to 1024 x 768, 60Hz.
- When Source Devices have DVI Output Connector, you must also connect the audio output to the L/R
audio input sockets on the rear of the TV (Audio cable not supplied)..
How to connect
1. If Source Devices have HDMI Output , connect to the HDMI socket located at the rear of the TV
using the HDMI Cable supplied with your external devise. (HDMI sends Digital Video and Audio with
one cable.)
INSTALLATION
INSTALLATION
21
USING THE FEATURES
Basic Operation
Tuning in the TV channels
1 After connecting an aerial to your LCD TV and connecting the mains cable to the TV and
2
3
230VAC mains socket, a red light will show on the front centre panel of the TV.
Press the POWER button, the red light will change to green and the First Time Installation
screen will show:
1. Make sure an aerial is fitted then press OK button on the remote to start
the Auto Programme Scan (APS).
2. In a short while you will see the TV programmes briefly as each channel is received and
stored in the memory. When APS is completed BBC1 will show, press CH+/- buttons to
view the other channels stored.
To power off press the POWER button, the green light will change to red.
Selecting a source
Press the SOURCE button to display the function required (TV/DVD/AV).
Using the arrow buttons on the remote highlight the function required and press the OK button
to select the function.
Select TV Channel
1 Press the CH.+/- button on the remote control and the CH. ▲/▼ button on the LCD
TV to change the TV channels.
2 You can directly select the TV channel required by pressing 1,2 or 3 etc on the remote key
pad.
3 Press the BACK(+10) button on the remote control to swap the channel between the current
channel No. and the previous channel No.
USING THE FEATURES
Adjusting the Volume
Press the VOL. +/– button on the remote control or the VOL. +/- button on the LCD TV to adjust
the volume.
To Mute the Sound
1 Press MUTE and the sound cuts off.
2 To turn mute off, press the MUTE button again, or simply press the VOL +/- button.
Sleep Timer
Press the SLEEP button continuously to select the sleep timer or turn the sleep timer from the
OFF,15,30,60minutes; when the LCD TV has reached the set time, it will automatically turn off. If
the TV has no input signal, it will automatically power down to standby after 15 minutes.
22
USING THE FEATURES
OSD Menu Operation
1 The main menu provides access to the following menus:
Video
Adjust picture setting such as picture
mode, contrast,brightness,sharpness,
colour and advanced.
Audio
Adjust sound option and effects.
Setup
Adjust colour standard, sound
standard, APS, Manual search,
Channel setup.
Preferences
Adjust preferences such as OSD, blue
screen, childlock, sleep timer, OSD
timer, OSD reset.
Screen
Adjust screen such as horizontal size,
horizontal position, vertical position,
phase, auto sync.
2 Press the MENU button on the remote control. The main menu will appear on the screen.
3 Use ◄/► to highlight your main menu option, then press OK to enter your selected
option.
Use ▲/▼ to highlight an option of the sub-menu. Use ◄/► to change the value of the
item.Press the EXIT button to exit MENU.
Video
Use this Video setting menu to adjust the picture quality which best corresponds to your viewing
requirements.The Video Menu includes the following options:
OPTION
Picture Mode
DESCRIPTION
Custom:Select for user’s settings.
The items of video can be adjusted when
the picture mode is for user’s settings
except advanced item.
Vivid:Select for enhanced picture contrast
and sharpness.
Mild:Select for mild picture settings.
Contrast
Adjust the difference between the
brightness and darkness regions of the
picture.
Brightness
Adjust to increase or decrease the
brightness.
Colour
Allows to adjust the colour intensity from 0
to 100.
Tint(NTSC)
Allows you to adjust the color tint of the
picture.(Only for NTSC)
Sharpness
Adjust to sharpen or soften the picture.
USING THE FEATURES
Standard:Select for standard picture
settings.Recommended for home
entertainment.
USING THE FEATURES 23
Video
OPTION
Advanced
DESCRIPTION
Display Mode Cycles through wide mode
settings:
In TV/SCART/S-VIDEO/VIDEO mode: Wide, 4:3,
Zoom, Original.
In Y,Pb,Pr/VGA mode: Wide, 4:3.
In HDMI mode, “P.SIZE” function is not available.
DCE
Allows you to adjust the
(Dynamic Contrast
Enhancemen)to be off, low,
mid, high.
Blue
Stretch
Allows you to adjust the blue
stretch.
Green
Stretch
Allows you to adjust the green
stretch.
Color
Temp.
Allows you to adjust the color
temp. to be cool, warm ,
standard.
Audio
Use this AUDIO setting menu to adjust the sound and balance and volume to your
listening requirements.
USING THE FEATURES
OPTION
24
USING THE FEATURES
DESCRIPTION
Volume
Presets the volume to a given setting.
Balance
Adjust to emphasize left or right speaker
balance.
Setup
Use this Setup menu to select Colour Standard, Sound
Standard, APS, Manual Search, Channel Setup.
OPTION
Allows you to select the colour
standard : AUTO,PAL, SECAM.
UK = PAL
Sound
Standard
Allows you to select the sound standard :
DK, BG, I, L/L’.
Setup
APS
Manual Search
Channel Setup
DESCRIPTION
Colour
Standard
DK
PAL D/K, SECAM D/K (East
Europe / China /
BG
PAL B/G, SECAM B/G
(Europe / East Europe / Asia /
New Zealand / M.East / Africa
/Australia)
I
PAL I (U.K. / Ireland / Hong
Kong / South Africa)
L/L’
SECAM L/L’
APS
Start APS
Press OK to start Auto Search and auto
sort process.
Country
Allows you select the country :Austria,
Belgium, Switzerland, Czech Rep.,
Germany, Denmark, Spain, France,
Finland, UK, Greece, Hungary, Italy,
Norway, Netherlands, Portugal, Poland,
Sweden, Slovenia, Slovakia, Turkey,
Others.
Manual
Search
Allows you to adjust the manual search
by hand if signal is too weak
or picture is blurry.
Channel Setup Press the ► button to select Sort,
Channel Setup
Finetune
Save
Delete, Skip, Finetune, Save.
Sort
Allows you to manually sort
the stored programme.
Delete
Allows you to delete the
stored programme.
Skip
Allows you to skip the
stored programme.
Finetune
Allows you to finetune the
stored programme.
Save
Allows you to save the
setup.
USING THE FEATURES
Setup
USING THE FEATURES 25
Preferences
Use this Preferences setting menu to set up some features: OSD, Blue Screen, Childlock,
Sleep Timer, OSD Timer, OSD Reset.
OPTION
DESCRIPTION
OSD
Language : Allows you to select the
OSD to be English, German,
French, Spanish, Italian,
Dutch, Portugese, Polish or
Russian.
Transparency: Allows you to adjust
transparency from 0 to
15.
Blue Screen
Allows you to select the blue screen to be
off or on.
Childlock
Allows you to select the childlock to be
yes or no. ( Default password is 0000,
golden password is 3796.)
Change Pin: Allows you to change the
4 -digit password.
Sleep Timer
Allows you to select the sleep timer to
be off, 15min, 30min, 60min.
OSD Timer
Allows selection of the display time of the
on-screen menu:5 s,10 s,15 s,
20 s, 25 s.
OSD Reset
Allows you to restore the factory settings.
Screen(Only for VGA)
USING THE FEATURES
OPTION
26
Auto Sync.
USING THE FEATURES
DESCRIPTION
Horizontal
Size
Allows you to adjust the Horizontal Size
from 0 to 100.
Horizontal
Position
Allows you to adjust the Horizontal
Position of the picture.
Vertical
Position
Allows you to adjust the Vertical Position
of the picture.
Phase
Allows you to improve focus clarity and
image stability.
Auto Sync.
Allows to auto synchronize VGA
signal.
USING THE BUILT - IN DVD
TO INSERT A DISC
Select DVD function before disc can be inserted.
Plays movies and other content on DVD, VCD, SVCD, and audio CD.
Note:
Insert a disc with label side facing to
front of TV
TO REMOVE A DISC
When removing the disc, do not attempt to pull it from its slot. Please push the
button .
1. Turn your LCD TV on.
2. Select Source to DVD.
/USB/CARD
(SCART)
(Y Pb Pr)
3. Insert a disc with label side facing front of TV (CD-R, CD-RW, DVD-R, DVDRW, VCD,
SVCD,DVD+R, or DVD+RW )
4 .After the disc is inserted, Smart NAVl will show the contents of the
disc automatically.
5 .Make sure Play Movie is selected and Press / , if the DVD does not play
automatically.
USING THE FEATURES
(CVBS)
USING THE FEATURES 27
USING THE CARD READER & USB
The Smart NAVI Viewer allows you to play JEPG/MPEG1/MPEG2/MP3/MPEG4 files in a SD
storage card on your LCD TV.
TO INSERT A SD CARD
Be sure to insert the SD card in the correct orientation. If the SD card is forced in the
wrong way, it may cause damage.
TO REMOVE A SD CARD
When removing the SD card, please pull it from its slot.
USING THE FEATURES
1. Turn your LCD TV on.
2. Select Source to DVD.
3. Insert a SD card that contains JEPG/MPEG1/MPEG2/MP3/MPEG4 files.
4. Press “CARD” button on the remote control to enter Card Reader Mode.
28
5. Press▲/▼button on the remote control to select the file you want to play,
and then press “OK” button to play the file.
NOTE:
1. The card socket and the DVD player cannot be used simultaneously, so please
insert either a card or a disc, not both at once.
2. If you want to view the DVD program or turn USB file on,
please press “CARD” button to switch it.
USB (Universal Serial Bus)
Connect a USB devise via a USB cable to the USB slot, and press USB/CARD button on
the remote to switch to USB playing status. And the TV screen will show the USB menu.
The playing interface and operation methods are alike MP3,MP4,JPEG files.The playing
interface is according to the content of your saved file.
USING THE FEATURES
PLAYING BACK DVD/USB/CARD
For trouble free operation of SD CARD/USB or DVD disc play. Please ensure
that the following steps are taken before inserting an SD card, USB or DVD
disc:
DVD Playback
1. Press source button and select DVD/USB/CARD function.
2. Allow 10 seconds before inserting a DVD disc ensuring that the label side
is facing you.
SD CARD/USB Playback
1.Press the Source button and select DVD/USB/CARD function.
2. Press the USB/CARD button on the remote.
3. Now Insert a Card (Label side facing you) or USB cable.
Note: If DVD has been previously played its important that the disc is
removed and that the USB/CARD button on the remote is pressed before
inserting a card or USB cable. Failure to do so will result in the card /USB
failing to be read and shown on the monitor.
DVD Supports following formats:
1. MP3 (CVR/VBR) bite rate range : 32kbps~320kbps.
WMA bite rate range: 64kbps~192kbps (Sample Rate)
2. JPG picture maximum resolution:
Baseline JPG: 3072X2048
Progressive JPG: Width x (High+128)<3300000
4. *.MPG, *.DAT MPEG1 video format, same as VCD.
Note:
a). When switching between TV and DVD it is necessary to press the source
select button until the DVD function indicator is seen on the screen.
b). For best performance, when viewing Jpeg (.Jpg) pictures via a flash
memory device connected through the USB socket, adjacent pictures
should be of the same resolution otherwise they may not display properly.
USING THE FEATURES
3. MPEG4:
Version: DivX3. 11/DivX4.xx/DivX5.xx/DivX6.0,
Video source resolution: PAL<=720x576, NTSC<=720x480.
USING THE FEATURES 29
Advanced Operations
SEARCH PLAY
For DVD discs:
Press the GOTO key in normal playing status to display on screen as follows:
Using the arrow buttons and number keys, adjust the title, chapter, audio, subtitle,
angle, time of the title, time of the chapter, repeat on/off, and time display mode.
VCD discs are alike DVD disc
For CD discs
Press the GOTO key the screen will display as following order:
Track 03/14
05:33
Disc Go To - - :- Track Go To:- -:- Select track: - -:- -
MP3 / WMA Playback
USING THE FEATURES
MP3/WMA Playback
30
The DVD player can playback discs, Including CD-R, CD-RW, DVD-R, DVD-RW,
DVD+R, or DVD+RW rec-orded with MP3 audio files. Multiple and multi-level
directories are supported.
Upon loading an MP3/ WMA disc , the screen shows a menu as :
USING THE FEATURES
MP3 / WMA Playback
MP3/WMA Playback
To go to a preferred directory, use the up/down cursor keys to scroll to your
selection and then press OK key to confirm.
Use the up/down cursor keys to select song and press OK button to start playing.
Press left cursor button can return to the parent directory, you can then select
other directory.
PICTURE CD Operations
Playing Kodak Picture CD or JPEG files
The DVD player is compatible to Kodak Picture CD and discs containing
JPEG image files (with .JPG file extension). This function is similar to MP3 playback
function.
Upon loading a Kodak Picture CD or disc containing JPEG files, TV screen shows:
Picture selection & Preview:
Press cursor buttons to select the target picture and press OK button to
show. The player will show the preview of the picture in preview area once
the cursor stops.
Rotate Picture:
USING THE FEATURES
Operations:
You can use arrow left /right buttons to rotate current showing picture.
USING THE FEATURES 31
PICTURE CD Operations
Previous and Next selection:
You can press
button to show previous picture or
picture manually.
button to show next
Slide Show:
The player will automatically play pictures in slide show mode if the disc
containing more than one picture. There are 16 available modes to wipe the TV
screen when displaying a new picture:
Press ▲/▼ button to change the current slide show mode when playing pictures.
MPEG 4 Operations
MPEG-4 Playback
Upon loading the disc, the screen shows a window as follows:
(The following picture just for reference only)
1 ) Choose the preference directory, use the UP and DOWN button and then
press the OK button to confirm.
USING THE FEATURES
2) Select the AVI file by using Cursor button to choose the preference AVI file
and press OK button to play it.
32
3) Return to the main directory. Press left cursor button and then press
STOP button to return to the maindirectory, you can then select
another directory.
4) To stop playing, press the STOP button at anytime.
USING THE FEATURES
USING THE DVD FEATURES
The setup menu is used to configure the player.
USING GENERAL SETUP PAGE
OPTION
TV DISPLAY
Wide
DESCRIPTION
4:3 Pan Scan
Select this when the player is connected
with a standard format TV set. Wide
screen picture shown in the full screen
with some part cut.
4:3 Letter box
Select this when the player is connected
with a standard format TV set. Wide
screen picture shown in the full screen
with black bars on the top and bottom of
the screen.
16:9
Select when the player is connected to a
wide screen TV set.
OSD
LANGUAGE
OSD Language
The default language is English.
Select other languages, the OSD will be
shown in other languages: English/Dutch/
French/German/Italian/Polish/Portuguese/
Spanish/Russian.
DIGITAL
OUTPUT
Output
There are 3 kind of SPDIF output mode
for choose: SPDIF OFF, SPDIF RAW and
SPDIF PCM .
RAW:
Set as default, the digital audio signal
output will be in RAW format. Normally,
this mode is use for DTS signal and Dolby
digital signal.
PCM:
Set as default, the digital audio signal
output will be in PCM format. Normally,
this mode is use for audio CD signa
USING THE FEATURES
SPDIF OFF:
Set as default, there will be no digital
audio signal output.
USING THE FEATURES 33
USING GENERAL SETUP PAGE
OPTION
SCREEN
SAVER
Wide
DESCRIPTION
Screen saver
When the player stops or the picture
becomes motionless for a couple of
minutes, there will be a screen saver
to prevent damage to the display
screen.
ON: To activate screen saver.
OFF: To disable screen saver.
LAST
MEMORY
Last Memory
ON: Each time when you turn off the
player, it will memorize the last play
time So if you next time turn on the
player and play the same disc, The
player will resume play from the point.
OFF: Disable the last memory
function.
ANALOG AUDIO SETUP PAGE
OPTION
DOWNMIX
DESCRIPTION
DOWNMIX
LT/RT: Select this option when the
USING THE FEATURES
DVD player is connected to external
amplifier with Pro-Logic decoding
function.
34
STEREO: press down button to select
the stereo,and then press ok button
to confirm it.
USING THE FEATURES
DOLBY DIGITAL SETUP
OPTION
DUAL MONO
DESCRIPTION
Dual Mono
Stereo: It means that the player will output
Left channel and Right channel audio.
L-Mono: It means that the player will
output left channel audio only.
R-Mono: It means that the player will
output right channel audio only.
MIX-Mono: It means that the player will
output the average signal of the Left
channel and Right channel audio.
Note:
This setting is used to play Dolby AC-3
encoded 2 channel discs. Some DVDs
may not being change in this menu
setting.
DYNAMIC
Dynamic
When set the dynamic range to FULL, the
soft music will be automatic increase and
the loudness music will be automatic
decrease.
When set the dynamic to OFF, the
function will be disabled.
Note:
This setting is used to play Dolby Digital
encode disc.
This function is suitable to use at night.
USING VIDEO SETUP PAGE
OPTION
RESOLUTION
480p/576p
Allows you to select 480p/576p,
720p mode, factory default is 720P.
USING THE FEATURES
RESOLUTION
DESCRIPTION
USING THE FEATURES 35
USING PREFERENCE PAGE
The unit must be at complete STOP mode to access to SETUP Preference Page.
OPTION
AUDIO
DESCRIPTION
AUDIO
Set the audio language to your
language of choice: English/Dutch/
French/German/Italian/Polish/Portuguese/
Spanish/Russian.
NOTE: Not all DVD discs are
recorded with multiple languages.
SUBTITLE
SUBTITLE
Select the Subtitle language:English/
Dutch/French/German/Italian/Polish/
Portuguese/Spanish/Russian/OFF.
NOTE: Not all DVD offer subtitles in
multiple languages.
DISC MENU
DISC MENU
Select the Disc Menu language:
English/Dutch/French/German/Italian/
Polish/Portuguese/Spanish/Russian.
NOTE: The default language is English.
PARENTAL
PASSWORD
PASSWORD MODE
Allows the user to set a maximum
rating of movie that can be played(e.g.
PG rating). Movies rated higher than
the level set will not be played. The
parental lock can only be changed after
input the correct password.
NOTE: This function is available only
when the discs have rating encoded
on.
Select to change old password (factory
default is 000000, golden password is
003796.) to new password.
PASSWORD CHANGE
USING THE FEATURES
36
PARENTAL
To change the password, you need
to:1.Input old password.2.Input a 6-digit
new password.3.Input the new
password again to confirm.
DEFAULT
USING THE FEATURES
DEFAULT
To restore all setup parameters to the
factory settings EXCEPT the password.
This function available in stop state or
tray opened.
TROUBLESHOOTING
Before contacting Goodmans Helpline, check the following chart for a possible cause
of the trouble you are experiencing and for a solution.
PROBLEM
TV will not turn on
SOLUTION
□ Make sure the power cord is plugged in.
□ The batteries in the remote control may be exhausted. Replace the
batteries.
No picture, no
sound
□ Check the interface cable between TV and antenna/cable TV.
□ Press the POWER button on the remote.
□ Press the TV button on the remote, then press the SOURCE
button repeatedly to select the connected video sources.
□ Make sure that the main power switch on the back panel is
switched on.
Poor picture, sound
OK
□ Check the interface cable between TV and antenna/cable TV.
□ Try another channel, the station may have broadcast
difficulties.
□ Adjust the Brightness/Contrast options in the VIDEO Menu.
Picture OK, Poor
sound
□ Sound may be muted. Press the MUTE button on the remote.
□ Press the TV button on the remote, then press
the VOL.+
button to increase the volume.
Audio noise
□ Move any infrared equipment away from the TV.
USING THE FEATURES
USING THE FEATURES 37
SPECIFICATIONS
Model
GTVL19W19HDV
Panel System
19 inch LCD panel
Display Resolution
1440 pixels (horizontal) x 900 pixels (vertical)
Television System
PAL - I
Brightness
Contrast Ratio
450 cd/m2
500:1
USING THE FEATURES
Inputs/Output
SCART
1
VGA
1
PC Audio In
1
Video In
1
S-video In
1
Phones
1
Y Pb Pr
1
HDMI IN
1
Coxial Out
1
TV
1
DVD INPUT
1
USB
1
CARD READER
1
Speaker Power
3 W+3 W
Power Source(MAX)
AC230 V~, 50Hz, 60 W
Dimension( W x D x H)
572.9 x 169.8 x 382mm
Weight(Net)
38
USING THE FEATURES
6.0 Kg
Display Modes
The screen resolution has been optimized during production for the display modes listed below.
If the signal from the system equals the standard signal mode, the screen adjusts automatically.
If the signal from the system is not equal to the standard signal mode, adjust the screen
resolution by referring to your video card user guide, otherwise there may be no video.
Y Pb Pr Mode
Resolution
480P: 720 x 480
480I: 720 x 480
576P: 720 x 576
576I: 720 x 576
720P: 1280 x 720
1080I: 1920 x 1080
Vertical Frequency(Hz)
Aspect Ratio
60
50
50
16:10(Wide), 4:3
60
50
60
VGA Mode
Horizontal pixels x Vertical Scan Line
Vertical Frequency(Hz)
Aspect Ratio
60
640 x 480
72
75
60
800 x 600
72
16:10(Wide), 4:3
75
60
1024 x 768
70
75
HDMI Mode
Vertical Frequency(Hz)
480P: 720 x 480
60
576P: 720 x 576
50
720P: 1280 x 720
1080I: 1920 x 1080
50
60
Aspect Ratio
16:10 (Wide)
50
60
USING THE FEATURES
Horizontal pixels X Vertical Scan Line
Note:
The picture may have something different from the actual things because of the
continuous products’ upgrading.
USING THE FEATURES 39
Download PDF