WatchGuard Firebox M400 / M500 Hardware Guide

WatchGuard
®
Firebox M400 / M500
Hardware Guide
KL5AE8
Copyright and Patent Information
Copyright© 1998–2015 WatchGuard Technologies, Inc. All rights reserved.
WatchGuard, the WatchGuard logo, LiveSecurity, and any other mark listed as a trademark in the “Terms of Use” portion of
the WatchGuard Web site that is used herein are either registered trademarks or trademarks of WatchGuard Technologies,
Inc. and/or its subsidiaries in the United States and/or other countries. All other trademarks are the property of their
respective owners.
Printed in the United States of America.
Part Number: 275-5120-001 Rev D
Revised: March 10, 2015
U.S. Patent Nos. 6,493,752; 6,597,661; D473,879. Other Patents Pending.
Complete copyright, trademark, patent, and licensing information can be
found in the WatchGuard product documentation. You can find this
document online at:
http://www.watchguard.com/help/documentation/
Notice to Users
Information in this guide is subject to change without notice. Updates to this guide are posted at:
http://www.watchguard.com/help/documentation/hardware.asp
Companies, names, and data used in examples herein are fictitious unless otherwise noted. No part of this guide may be
reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express
written permission of WatchGuard Technologies, Inc.
ABOUT WATCHGUARD
WatchGuard offers affordable, all-in-one network and content security solutions that
provide defense-in-depth and help meet regulatory compliance requirements. The
WatchGuard XTM line combines firewall, VPN, GAV, IPS, spam blocking and URL
filtering to protect your network from spam, viruses, malware, and intrusions. The new
XCS line offers email and web content security combined with data loss prevention.
WatchGuard extensible solutions scale to offer right-sized security ranging from small
businesses to enterprises with 10,000+ employees. WatchGuard builds simple, reliable,
and robust security appliances featuring fast implementation and comprehensive
management and reporting tools. Enterprises throughout the world rely on our
signature red boxes to maximize security without sacrificing efficiency and
productivity.
For more information, please call 206.613.6600 or visit www.watchguard.com.
ii
ADDRESS
505 Fifth Avenue South
Suite 500
Seattle, WA 98104
SUPPORT
www.watchguard.com/support
U.S. and Canada +877.232.3531
All Other Countries +1.206.521.3575
SALES
U.S. and Canada +1.800.734.9905
All Other Countries +1.206.613.0895
WatchGuard Firebox M400 / M500
Hardware Specifications
WatchGuard security appliances deliver unparalleled unified threat management, superior performance, ease
of use, and value. Powerful subscription-based security services boost protection in critical attack areas for
multiple layers of defense.
This guide introduces the Firebox M400 and M500, RoHS-compliant (lead-free) hardware products offered by
WatchGuard.
Fireware XTM OS
The Firebox M400 and M500 devices use WatchGuard’s next generation UTM OS—Fireware® XTM. Each
Firebox device includes Fireware XTM and delivers exceptional protection against today's sophisticated
threats to make sure that your business stays connected. For more information on the features of Fireware
XTM OS, see the current Fireware XTM WatchGuard System Manager Help or Fireware XTM Web UI Help.
Hardware Guide
1
Hardware Specifications
Package Contents








Firebox M400 or M500 device
Quick Start Guide
1 straight-through Ethernet cable (green)
1 cross-over Ethernet cable (red)
1 serial cable with an RJ-45 connector (console cable)
3 power cords (US, EU, UK)
2 rack mount ears
4 screws for rack mount ears
About Your Hardware
Hardware Specifications
Firebox M400
Firebox M500
Processor
Intel Celeron G1820 CPU
Intel Pentium G3420 CPU
Storage
Compact Flash 4 GB
Compact Flash 4 GB
Memory: RAM
4 GB
8 GB
Power supply
150W, 100~240 VAC, 50/60 Hz
150W, 100~240 VAC, 50/60 Hz
Dimensions
Depth: 12” (30.5 cm)
Width: 17” (43.1 cm)
Height: 1.73” (4.4 cm) - 1U
Depth: 12” (30.5 cm)
Width: 17” (43.1 cm)
Height: 1.73” (4.4 cm) - 1U
Weight
15.4 lbs (7 Kg)
15.4 lbs (7 Kg)
Interface Specifications
2
Network interfaces
6x 1000 Base-TX (10/ 100/1000Mbps), RJ45 connector
2x 1G SFP (Small Form-factor Pluggable) ports
 SFP transceiver must support the SerDes interface.
 SFP transceivers must be purchased separately
I/O interfaces
2 USB 2.0
1 RJ45 Serial Port
WatchGuard Firebox M400 / M500
Hardware Specifications
Environmental Requirements
To safely install your Firebox, we recommend that you:



Install it in a network rack
Put it in a secure area, such as a locked room, to block the device from people who do not have
permission to use it
Connect it to a conditioned power supply to prevent damage from sudden power changes
Other environmental requirements:
Operating temperature
0 - 40°C
(32 – 104°F)
Operating humidity
5% – 90% non-condensing
Non-operating temperature
–40 – 70°C
(–40 – 158°F)
Non-operating humidity
5%–90%, non-condensing
Hardware Guide
3
Hardware Specifications
Hardware Description
Front View
Firebox M500 front panel:
Left front:
Buttons and Indicators
Power (
)
The power indicator on the left front of the device is green when the device is powered on.
Arm/Disarm ( )
When the device is armed and ready to pass traffic, this indicator is green. When the device is
powered on, but not ready to pass traffic, this indicator is red.
Storage ( )
When there is activity on the compact flash, the Storage indicator is yellow.
Power Button ( )
The Power button on the left front of the device is green when the device is powered on, and red
when power is available, but the device is powered off.
When the button is red, press this button to power on the device. When the button is green, press
and hold the power button for five seconds to power off the device.
Reset Button
The Reset button, located to the right of the power button, resets the device to factory-default
settings. To reset the device, use the procedure in “Restore Factory-Default Settings” on page 7.
4
WatchGuard Firebox M400 / M500
Hardware Specifications
Interfaces
The Firebox M400 and M500 devices each have a total of 8 network interfaces, two USB interfaces, and one
console port.
Serial port
An RJ45 connector for the serial interface is located to the left of the USB interfaces. You can connect
to this serial interface to log in to the Fireware XTM command line interface.
For more information about the command line interface, see the current Fireware XTM Command Line
Interface Reference.
Dual USB interfaces
Connect a USB storage device to use for USB backup and restore, or to store a support snapshot.
For more information about USB functions, see the current WatchGuard System Manager Help or
Fireware XTM Web UI Help.
RJ45 interfaces
Interfaces 0 - 5 are RJ45 Ethernet interfaces that support link speeds of 10, 100, or 1000 Mbps. Each
RJ45 interface has a pair of indicators. The right indicator shows the interface connection status. The
left indicator shows interface activity.
Indicator
Indicator color
Interface Status
Connection (right)
Yellow
Link at 1000 Mbps
Green
Link at 100 Mbps
Not lit
Link at 10 Mbps, or no link
Yellow, blinks
Power on, network activity
Not lit
Power off, no connections
Activity (left)
SFP ports
Interfaces 6 and 7 are Gigabit Ethernet SFP ports. To use these interfaces, you must plug in a
compatible Ethernet copper or fiber SFP transceiver that supports the SerDes interface. A transceiver
that supports only SGMII (Serial Gigabit Media Independent Interface) is not compatible.
The indicators to the right of interface 6 and 7 indicate a 1 GB link on these interfaces. The top
indicator shows the status of interface 6. The bottom indicator shows the status of interface 7.from
Indicator
Indicator color
Interface Status
Connection
Yellow
Operates at 1 Gpbs
Activity
Yellow, blinks
Power on, network activity
You can purchase compatible transceivers from an authorized WatchGuard reseller:
WatchGuard SKU WG8585
Transceiver 1Gb Short-Range SFP for WatchGuard Firebox M400 & M500
Finisar FTLF8519P3BNL
850 nm MultiMode SFP Fiber
Short range
Up to 550m on 50/125?m MMF, (OM2)
300m on 62.5/125?m MMF (OM1)
WatchGuard SKU WG8584
Transceiver 1Gb Copper SFP for WatchGuard Firebox M400 & M500
Olink OLST12R-CNS1
Hardware Guide
5
Hardware Specifications
Rear View
Rear view of the device.
Cooling fans
The fans decrease the internal temperature of the device. The fans start at maximum RPM when the
device is powered on. The device adjusts the fan speed based on the external temperature and
device CPU load.
Power Switch
Controls the power supplied to the device.
AC receptacle
Accepts a detachable AC power cord supplied with the device. The power supply is a WatchGuard
standard auto-sensing AC power supply.
You must disconnect power the AC power cord from both power supplies before you remove
the cover of the Firebox device for any reason.
6
WatchGuard Firebox M400 / M500
Hardware Specifications
Rack Mount Instructions
Each Firebox device ships with rack mount ears for installation in a network rack.
When you install the device in a rack, make sure you consider these factors:
Elevated Operating Ambient Temperature
If you install the device in a closed or multi-unit rack assembly, the operating ambient temperature
of the rack environment may be greater than room ambient. Make sure the ambient temperature of
the rack environment is within the certified operating range specified in this Hardware Guide.
Reduced Air Flow
When you install the device in a rack, make sure that the amount of air flow required for safe
operation of the equipment is not compromised.
Mechanical Loading
When you mount the device in the rack, avoid hazardous conditions caused by uneven mechanical
loading.
Circuit Overloading
Make sure you connect the device to the power supply circuit in such a way that there is no
overloading of the circuits, and no impact on overcurrent protection and supply wiring.
Reliable Grounding
Make sure all rack-mounted equipment is correctly grounded. For example, make sure you use power
strips instead of direct connections to the branch circuit.
Restore Factory-Default Settings
If you ever need to, you can restore your Firebox to its factory-default settings. For example, if you do not know
the administrator account passphrase or you want to start over with a new configuration, you can reset your
device. Make sure you back up your device configuration before you reset your device in case you want to
restore it in the future.
To reset your device:
1. If necessary, use the power switch on the rear of the device to power it on.
2. Press and hold the Power button on the front of the device for five seconds to power it off.
3. Press and hold the Reset button, while you briefly press the Power button on the front of the device
to power it on.
4. Continue to hold the Reset button while the Arm indicator is red.
5. Continue to hold the Reset button while the Arm indicator is slowly flashing green.
6. When the Arm indicator flashes green more rapidly, release the Reset button.
7. Wait until the Arm indicator starts flashing red.
8. Press and hold the Power button on the front of the device for five seconds to power off the device.
9. Briefly press the Power button on the front of the device to power it on.
Hardware Guide
7
Hardware Specifications
Safety Notices
All WatchGuard products are designed and tested to meet strict safety requirements. These requirements
include product safety approvals and other global compliance standards. Read these instructions carefully
before you operate the product, and refer to them as needed for continued safe operation of your product.
Product Safety Certification
The WatchGuard product is safety certified for these standards:




CAN/CSA-C22.2 No.60950-1-07+A1:2011
UL 60950-1:2007 R12.11
EN 60950-1:2006+A11+A1+A12 (2nd Edition)
IEC 60950-1:2005 (2nd Edition)+A1:2009
Safety Warning






8
Do not place objects on the power cord.
Do not obstruct the ventilation openings. These openings prevent overheating of the device.
Never push objects of any kind into slots or openings on this equipment. If you make contact with a
voltage point or short out a part, it can result in fire or electrical shock.
If the equipment is supplied with a three-conductor AC power cable, the power cable must be plugged
in to an approved three-contact electrical outlet with the grounding wire connected to an electrical
ground (safety ground) at the power outlet.
When you remove or install a device, follow the general installation safety instructions provided in this
Hardware Guide to avoid injury or damage to the device.
The lithium battery used in the security appliance may not be replaced by the user. Return the
appliance to a WatchGuard authorized service center for replacement with the same or equivalent
type recommended by the manufacturer. If, for any reason, the battery or security appliance must be
disposed of, do so following the battery manufacturer’s instructions.
WatchGuard Firebox M400 / M500
Hardware Specifications
Hinweise Zur Sicherheit
Alle WatchGuard Produkte werden entwickelt und getestet, um strenge Sicherheitsanforderungen zu
erfüllen. Diese Anforderungen umfassen Produktsicherheit Zulassungen und andere globale ComplianceStandards. Bitte lesen Sie die folgenden Anweisungen sorgfältig, bevor Sie das Produkt, und bezeichnen sie
als notwendig, um den sicheren Betrieb des Geräts zu gewährleisten. Weitere Informationen finden Sie in der
elektronischen Hardware Guide.
Die WatchGuard Produkt ist Sicherheit unter den folgenden Normen zertifiziert:




CAN/CSA-C22.2 No.60950-1-07+A1:2011
UL 60950-1:2007 R12.11
EN 60950-1:2006+A11+A1+A12 (2nd Edition)
IEC 60950-1:2005 (2nd Edition)+A1:2009
Sicherheitshinweis






Legen Sie keine Gegenstände auf das Netzkabel.
Sorgen Sie dafür, dass die Öffnungen der Ventilation zu keinem Zeitpunkt verschlossen, verstopft oder
anderweitig blockiert sind. Die Ventilation verhindert ein Überhitzen des Gerätes.
Stecken Sie niemals Gegenstände irgendwelcher Art in Schlitze oder Öffnungen des Gerätes. Wenn Sie
Kontakt mit einem spannungsführenden Punkt oder ein Bauteil kurzschließen, kann es zu einem Brand
oder elektrischen Schlag führen.
Falls dieses Gerät mit einem Schutzkontaktnetzkabel ausgeliefert wird, verwenden Sie ausschließlich
nur dieses an einer dafür vorgesehenen Netzsteckdose.
Um Verletzungen oder Schäden am Gerät zu vermeiden, befolgen Sie vor dem Entfernen oder
Installieren des Gerätes die im Hardware Guide zur Verfügung gestellten allgemeinen Installationsund Sicherheitshinweise.
Die in dem Gerät verwendete Lithium-Batterie kann nicht vom Verbraucher getauscht werden. Bei
Bedarf senden Sie das Gerät an einen WatchGuard Autorisierten Service-Center, um diesen Tausch mit
einer vom Hersteller empfohlenen gleichen oder eines gleichwertigen Typs durchführen zu lassen.
Entsorgen Sie die Batterie, bzw. das Gerät gemäß Ihren örtlichen Entsorgungsbestimmungen.
Hardware Guide
9
Hardware Specifications
Avis de sécurité
Tous les produits de WatchGuard sont conçus et testés pour répondre à des exigences de sécurité strictes. Ces
exigences incluent l'homologation de la sécurité du produit et la conformité à d'autres normes globales. Lisez
ces instructions avec attention avant de mettre en route l'appareil et reportez-vous-y au besoin pour assurer
une utilisation sûre de l'appareil.
Certifications de sécurité du produit
Les produits de WatchGuard répondent aux normes suivantes;




CAN/CSA-C22.2 No.60950-1-07+A1:2011
UL 60950-1:2007 R12.11
EN 60950-1:2006+A11+A1+A12 (2nd Edition)
IEC 60950-1:2005 (2nd Edition)+A1:2009
Avertissement de sécurité






10
Ne placez aucun objet sur le cordon d'alimentation.
N'obstruez pas les ouvertures de ventilation. Ces ouvertures préviennent la surchauffe de l'appareil.
N'insérez jamais d'objet de quelque sorte dans les fentes d'ouverture de cet équipement. Si vous faites
contact avec un point sous tension ou court-circuitez un composant, cela peut causer un incendie ou
un choc électrique.
Si l'appareil est fourni avec un câble d'alimentation électrique à trois points (avec prise terre), le câble
d'alimentation doit impérativement être branché sur une prise à trois points correctement mise à la
terre.
Quand vous enlevez ou désinstallez un équipement, suivez les instructions générales de sécurité
fournies dans ce Guide Matériel pour éviter toute blessure ou dégât à l'appareil.
La batterie au lithium utilisée dans cet appareil de sécurité réseau ne peut pas être remplacée par
l'utilisateur final. Renvoyez cet appareil à un centre de service autorisé par WatchGuard pour un
remplacement avec une batterie du même type ou de type équivalent recommandé par le fabricant.
Si pour une raison quelconque la batterie ou cet équipement doit être mis au rebus, suivez les
recommandations du fabricant de la batterie.
WatchGuard Firebox M400 / M500
Hardware Specifications
Aviso De Seguridad
Todos los productos WatchGuard están diseñados y probados para satisfacer estrictos requisitos de
seguridad. Estos requisitos incluyen la homologación de productos de seguridad y otras normas de
cumplimiento global. Por favor, lea atentamente las siguientes instrucciones antes de utilizar el producto, y se
refieren a ellos como sea necesario para garantizar el funcionamiento seguro y continuo de su producto.
Información adicional se puede encontrar en la Guía del usuario electrónica.
Certificación de seguridad del producto
El producto tiene certificación de seguridad WatchGuard bajo las siguientes normas:




CAN/CSA-C22.2 No.60950-1-07+A1:2011
UL 60950-1:2007 R12.11
EN 60950-1:2006+A11+A1+A12 (2nd Edition)
IEC 60950-1:2005 (2nd Edition)+A1:2009
Advertencia de seguridad






No coloque objetos sobre el cable de alimentación.
No obstruya las aberturas de ventilación. Estas aberturas evitan el sobrecalentamiento de la máquina.
Nunca introduzca objetos de ningún tipo en las ranuras o aberturas del equipo. El contacto con puntos
de voltaje o el cortocircuito de una pieza podría provocar un incendio o una descarga eléctrica.
Si el equipo se suministra con un cable de alimentación de CA de tres conductores , el cable de
alimentación debe estar conectado a una toma de corriente de tres contactos aprobado con el cable
de tierra conectado a un (a tierra de seguridad) planta eléctrica en la toma de corriente.
Al extraer o instalar un electrodoméstico, siga las instrucciones generales de instalación de seguridad.
La batería de litio utilizada en el dispositivo de seguridad no podrá ser sustituido por el usuario.
Devuelva el aparato a un centro de servicio autorizado de WatchGuard para el reemplazo con el mismo
tipo o equivalente recomendada por el fabricante. Si , por cualquier razón , la batería o la seguridad del
aparato se debe desechar, hágalo siguiendo las instrucciones del fabricante de la batería.
Hardware Guide
11
Hardware Specifications
12
WatchGuard Firebox M400 / M500
Legal and Regulatory Information
Limited Hardware Warranty
This Limited Hardware Warranty (the “Warranty”) applies to the enclosed hardware product, not including any associated
software, which is licensed pursuant to a separate end-user license agreement and warranty (the “Product”). BY USING
THE PRODUCT, YOU (either an individual or a single entity) AGREE TO THE TERMS HEREOF. If you do not agree to these
terms, please return this package, along with proof of purchase, to the authorized dealer from which you purchased it for
a full refund. WatchGuard Technologies, Inc. (“WatchGuard”) and you agree as set forth below or on the reverse side of
this card, as applicable:
1. LIMITED WARRANTY. WatchGuard warrants that upon delivery and for one (1) year thereafter (the “Warranty Period”):
(a) the Product will be free from material defects in materials and workmanship, and (b) the Product, when properly
installed and used for its intended purpose and in its intended operating environment, will perform substantially in
accordance with WatchGuard applicable specifications.
This warranty does not apply to any Product that has been: (i) altered, repaired or modified by any party other than
WatchGuard except for the replacement or inclusion of specified components authorized in, and performed in strict
accordance with, documentation provided by WatchGuard; or (ii) damaged or destroyed by force majeure events,
accidents, power spikes or similar events, or by any intentional, reckless or negligent acts or omissions of any party. You
may have additional warranties with respect to the Product from the manufacturers of Product components. However,
you agree not to look to WatchGuard for, and hereby release WatchGuard from any liability for, performance of,
enforcement of, or damages or other relief on account of, any such warranties or any breach thereof.
2. REMEDIES. If any Product does not comply with the WatchGuard warranties set forth in Section 1 above, WatchGuard
will, following the receipt of the product you claim is defective and at its option, either (a) repair the Product, or (b)
replace the Product with a like or similar product; provided, that you will be responsible for returning the Product and for
all costs of shipping and handling. Repair or replacement of the Product shall not extend the Warranty Period. Any
Product, component, part or other item replaced by WatchGuard becomes the property of WatchGuard. WatchGuard
shall not be responsible for return of or damage to any software, firmware, information or data contained in, stored on, or
integrated with any returned Products.
3. DISCLAIMER AND RELEASE. THE WARRANTIES, OBLIGATIONS AND LIABILITIES OF WATCHGUARD, AND YOUR REMEDIES,
SET FORTH IN PARAGRAPHS 1 AND 2 ABOVE ARE EXCLUSIVE AND IN SUBSTITUTION FOR, AND YOU HEREBY WAIVE,
DISCLAIM AND RELEASE ANY AND ALL OTHER WARRANTIES, OBLIGATIONS AND LIABILITIES OF WATCHGUARD AND ALL
OTHER RIGHTS, CLAIMS AND REMEDIES YOU MAY HAVE AGAINST WATCHGUARD, EXPRESS OR IMPLIED, ARISING BY LAW
OR OTHERWISE, WITH RESPECT TO ANY NONCONFORMANCE OR DEFECT IN THE PRODUCT (INCLUDING, BUT NOT
LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ANY IMPLIED
WARRANTY ARISING FROM COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE, ANY WARRANTY OF
NONINFRINGEMENT, ANY WARRANTY OF UNINTERRUPTED OR ERROR-FREE OPERATION, ANY OBLIGATION, LIABILITY,
RIGHT, CLAIM OR REMEDY IN TORT, WHETHER OR NOT ARISING FROM THE NEGLIGENCE (WHETHER ACTIVE, PASSIVE OR
IMPUTED) OR FAULT OF WATCHGUARD OR FROM PRODUCT LIABILITY, STRICT LIABILITY OR OTHER THEORY, AND ANY
Hardware Guide
13
Legal and Regulatory Information
OBLIGATION, LIABILITY, RIGHT, CLAIM OR REMEDY FOR LOSS OR DAMAGE TO, OR CAUSED BY OR CONTRIBUTED TO BY,
THE PRODUCT).
4. LIMITATION AND LIABILITY. WATCHGUARD'S LIABILITY (WHETHER ARISING IN CONTRACT (INCLUDING WARRANTY),
TORT (INCLUDING ACTIVE, PASSIVE OR IMPUTED NEGLIGENCE AND STRICT LIABILITY AND FAULT) OR OTHER THEORY)
WITH REGARD TO ANY PRODUCT WILL IN NO EVENT EXCEED THE PURCHASE PRICE PAID BY YOU FOR SUCH PRODUCT.
THIS SHALL BE TRUE EVEN IN THE EVENT OF THE FAILURE OF ANY AGREED REMEDY. IN NO EVENT WILL WATCHGUARD BE
LIABLE TO YOU OR ANY THIRD PARTY (WHETHER ARISING IN CONTRACT (INCLUDING WARRANTY), TORT (INCLUDING
ACTIVE, PASSIVE OR IMPUTED NEGLIGENCE AND STRICT LIABILITY AND FAULT) OR OTHER THEORY) FOR COST OF COVER
OR FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION LOSS
OF PROFITS, BUSINESS, OR DATA) ARISING OUT OF OR IN CONNECTION WITH THIS WARRANTY OR THE USE OF OR
INABILITY TO USE THE PRODUCT, EVEN IF WATCHGUARD HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
THIS SHALL BE TRUE EVEN IN THE EVENT OF THE FAILURE OF ANY AGREED REMEDY.
5. MISCELLANEOUS PROVISIONS. This Warranty will be governed by the laws of the state of Washington, U.S.A., without
reference to its choice of law rules. The provisions of the 1980 United Nations Convention on Contracts for the
International Sales of Goods, as amended, shall not apply. You agree not to directly or indirectly transfer the Product or
use of the product or associated documentation to any country to which such transfer would be prohibited by the U.S.
Export laws and regulations. If any provision of this Warranty is found to be invalid or unenforceable, then the remainder
shall have full force and effect and the invalid provision shall be modified or partially enforced to the maximum extent
permitted by law to effectuate the purpose of this Warranty. This is the entire agreement between WatchGuard and you
relating to the Product, and supersedes any prior purchase order, communications, advertising or representations
concerning the Product AND BY USING THE PRODUCT YOU AGREE TO THESE TERMS. IF THE PRODUCT IS BEING USED BY
AN ENTITY, THE INDIVIDUAL INDICATING AGREEMENT TO THESE TERMS BY USING THE PRODUCT REPRESENTS AND
WARRANTS THAT (A) SUCH INDIVIDUAL IS DULY AUTHORIZED TO ACCEPT THE WARRANTY ON BEHALF OF THE ENTITY
AND TO BIND THE ENTITY TO THE TERMS OF THIS WARRANTY; (B) THE ENTITY HAS THE FULL POWER, CORPORATE OR
OTHERWISE, TO ENTER INTO THE WARRANTY AND PERFORM ITS OBLIGATIONS UNDER THE WARRANTY AND; (C) THE
WARRANTY AND THE PERFORMANCE OF THE ENTITY'S OBLIGATIONS UNDER THE WARRANTY DO NOT VIOLATE ANY
THIRD-PARTY AGREEMENT TO WHICH THE ENTITY IS A PARTY. No change or modification of the Warranty will be valid
unless it is in writing and is signed by WatchGuard.
14
WatchGuard Firebox M400 / M500
Legal and Regulatory Information
Declaration of Conformity
DECLARATIONOFCONFORMITY
WatchGuardTechnologies,Inc.
505FifthAve.South,Suite500
Seattle,WA981043892USA
WatchGuardTechnologiesInc.herebydeclaresthattheproduct(s)listedbelowconformtothe
EuropeanUnionDirective63/68/EUandstandardsidentifiedinthisdeclaration.
Product(s):
WatchGuardModels:FireboxM400andFireboxM500
HardwareModel:KL5AE8
EUDirective(s):
LowVoltage(2006/95/EC)
ElectromagneticCompatibility(2004/108/EC)
RoHS(2002/95/EC)
WEEEDirective2002/96/EC
REACHEC1907/2006
Standard(s):
Safety:
Emission:
Immunity:
Hardware Guide
EN609501:2006+A11+A1+A12
EN55022:2010/AC:2011ClassA
FCCPart15SubpartB:2011ClassA
ICES003:Issue52010
CISPR22:2008ClassA
VCCIV3/2013.04ClassAITE
AS/NZSCISPR22.2009+A1:2010ClassA
EN6100032:2006+A1:2009+A2:2009
EN6100033:201308
EN55024:2010
EN6100042Edition2.0200812
EN6100043Edition3.2201004
EN6100044Edition3.0201205
EN6100045Edition2.0200511
EN6100046Edition3.0200810
EN6100048Edition2.0200909
EN6100041Edition2.0200403
Signature:
FullName:
AnnetteO’Neil
Position:
DirectorofLegalAffairs
Date: 15September2014
15
Legal and Regulatory Information
CE Notice
The CE symbol on your WatchGuard Technologies equipment indicates that it is in compliance with the
Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the European
Union (EU).
FCC Certification
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one of the following measures:




Reorient or relocate the device.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
16
WatchGuard Firebox M400 / M500
Legal and Regulatory Information
Industry Canada
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. CAN ICES-3(B)/NMB-3(B)
Ce dispositif est conforme à la norme CNR-210 d’Industrie Canada applicable aux appareils radio exempts de
licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de
brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage
susceptible de provoquer un fonctionnement indésirable.
Japan VCCI Notice (Class A ITE)
VCCI Notice
これは VCCI 評議会の基準に基づくクラス A
製品です。本製品がラジオやテレビ受信機
の近くで使用されている場合は、電波障害
を引き起こすことがあります。インストー
ルして、取扱説明書に従って機器を使用し
ています。
VCCI Notice
This is a Class A product based on the standard of
the VCCI Council. If this product is used near a
radio or television receiver, it may cause radio
interference. Install and use the equipment
according to the instruction manual.
Taiwan Class A Notice
Taiwan Class A Type Device
警告使用者 : 這是甲類的資訊產品,在居住
的環境中使用時,可能會造成射頻干擾,在
這種情況下,使用者會被要求採取某些適當
的對策。
Taiwan Class A Type Device
Warn users: This Class A product may cause radio
interference when used in a residential
environment. If this occurs, the user must take
appropriate countermeasures.
Mexico Notice
La operación de este equipo está sujeta a las siguientes dos condiciones:
1. es posible que este equipo o dispositivo no cause interferencia perjudicial
2. este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su
propia operación no deseada.
Hardware Guide
17
Legal and Regulatory Information
Korea Notice
사용자안내문
기 종 별
사 용 자 안 내 문
A 급 기기
( 업무용 방송통신기자재 )
이 기기는 업무용 (A 급 )
전자파적합기기로서 판매자 또는
사용자는 이 점을 주의하시기
바라며 , 가정외의 지역에서
사용하는 것을 목적으로
합니다 . 목적으로 합니다
RoHS Statement
The member states of the European Union approved directive 2002/95/EC, Restrictions of Hazardous
Substances (“RoHS directive”‘) that became valid on July 1, 2006. It states that all new electrical and electronic
equipment put on the market within the member states must not contain certain hazardous materials. This
WatchGuard device complies with the European Union’s R0HS directive 2002/95/EC and similar regulations
that may be adopted by other countries for European Sales.
WEEE Statement
WEEE is a general set of requirements dictated in the EU Directive 2002/96/EC. This Directive mandated that
member EU countries enact regulations governing the Waste of Electrical and Electronic Equipment (WEEE).
The Directive, and its individual transpositions into specific country laws and legislation, is aimed at the
reduction of WEEE through reuse, recovery, and recycling of WEEE.
WatchGuard is working in partnership with our European Union (EU) distribution partners to ensure that our
products are in compliance with the WEEE statutes, and that the recovery of our product per the specific EU
country legislative requirements is seamless for our product’s end users. If you have a WatchGuard product
that is at its end of life and needs to be disposed of, please contact WatchGuard Customer Care Department at:
U.S. Customers: 877.232.3531
International Customers: +1.206.613.0456
WatchGuard is reasonably confident that our products do not contain any substances or hazardous materials
presently banned by any legislation, and do not present a risk due to hazardous materials. WEEE recovery
professionals should also note that these products do not have any materials that are of particular high value
in their individual form.
18
WatchGuard Firebox M400 / M500
Legal and Regulatory Information
REACH Certificate of Compliance
The EU chemicals policy REACH (Registration, Evaluation, Authorization and restriction of Chemicals) came
into effect on June 1st 2007. REACH is Europe's new chemicals legislation, which is applicable in all 27 EU
Member States as well as the EFTA European Economic Area (EEA). REACH creates a new system for gathering
information, assessing risks to human health and the environment, and authorizing or restricting the
marketing and use of chemicals produced or supplied in the EEA. REACH has an impact on EEA producers and
importers of finished products and users of chemicals in the course of industrial or professional activities.
WatchGuard supports the overall REACH objective of improving the protection of human health and the
environment and will meet all applicable REACH requirements. WatchGuard is strongly committed to working
with our customers and supply chain to define and implement the REACH requirements and ensure a smooth
transition to compliance.
One of the REACH requirements is that manufacturers and importers have the duty to register substances they
are producing or importing. In accordance with the regulations, the products of WatchGuard do not need to
be registered for the following reasons:
1. WatchGuard does not import more than 1 metric ton per year of a substance as defined by REACH.
2. WatchGuard products are non-chemical products that are not designed to release any substance
under normal and reasonably predictable application.
3. Our products do not contain the listed substances at more than 0.1% by weight of the whole
product/part.
Licensing
Some components of the WatchGuard System Manager software and Fireware XTM OS are distributed with
source code covered under one or more third party or open source licenses.
You can find full licensing information in the product documentation on our public web site at
www.watchguard.com/help/documentation.
To get the source code covered by this license, contact WatchGuard Technical Support at:
United States or Canada:
All other countries:
877.232.3531
+1.360.482.1083
You can download the source code at no charge. If you request the material be sent to you on CD-ROM, there
is a $35 charge for administration and shipping.
Hardware Guide
19
Legal and Regulatory Information
20
WatchGuard Firebox M400 / M500
Download PDF