ARLO-Q INDOOR CAMERA: CONNECTING DEVICE: Follow the instructions included with your camera, which are reproduced here. 1. 2. 3. 4. 5. Connect one end of the USB cable to the port on the camera Plug the other end of the USB cable into the adapter Plug the USB adapter into a wall socket and wait for the camera LED to blink amber Download the Arlo app for your smartphone from app store Launch the app from your smartphone and tap the New System Setup button and follow the onscreen instructions – OR – 6. From a computer, visit https://arlo.netgear.com and click the New System Setup button and select Arlo Q 7. Connect your Arlo Q directly to your wi-fi router: Follow onscreen instructions from either the Arlo app on smartphone or from a computer NOTE: If you experience difficulties with connecting the camera to your wi-fi router, activate the WPS from your router, then initiate the step from the camera to connect it to wi-fi, by pressing the SYNC button on the camera making sure you leave the name and password field blank. Then continue the rest of the setup. ARLO Q LED Guide: Solid Amber: The camera is booting up Slow Blinking Amber: The camera is powered on and is ready for setup Fast Blinking Amber: The camera is not connected to a WiFi network yet Solid Blue: The camera is powered on and is connected to Arlo servers Slow Blinking Blue: The camera is connecting to a WiFi network Fast Blinking Blue: The camera is connecting to Arlo servers Solid Purple: The camera is connected to a WiFi network, but is not connected to the internet Blinking Purple: The camera is too far away from the router Blink Blue/Amber: A firmware update is in progress. DO NOT TURN OFF THE CAMERA Off: The camera is powered off, or the status light has been turned off in the settings AS A QUICK REMINDER, THESE DEVICES AND SERVICES ARE ONLY TO ASSIST YOU IN MONITORING YOUR LOVED ONES AND/OR YOUR HOME AND ARE NEVER MEANT TO REPLACE MEDICAL CARE OR EMERGENCY SERVICES.