COLOR TFT LCD MONITOR WITH MULTI-TOUCH

LI
LL
IP
U
T
D
IR
T
EC
COLOR TFT LCD
MONITOR WITH
MULTI-TOUCH
FUNCTION
Manual
DEAR CUSTOMERS
EC
T
Thank you for choosing our TFT LCD (liquid crystal display) monitor. This product employs
integrate circuits, low power consumption, and no radiation emission. It has fashion designed
appearance and good portability. The TFT LCD screen is the most suitable display for VGA, VCD,
DVD, and GPS on vehicles or vessels. Moreover, this product is able to be used in office, at home,
or other proper positions. Please enjoy the benefits of convenience, safety, and space-saving from
this TFT LCD monitor in different ways.
IR
To ensure the best use of this product, please read this handbook
D
carefully beforehand.
CAUTIONS
1. Please use the adapter attached in the accessories.
T
2. The multi-touch function can be operated under Windows 7 OS only.
IP
U
3. Please do NOT expose this product to direct sunlight, heat, or humid conditions.
4. Please keep away from strong light while using this product in order to obtain the
clearest and the most colorful pictures.
5. Please avoid heavy impact or drop onto the ground.
6. Please do NOT use chemical solutions to clean this product.
LL
7. Please simply wipe with a clean soft cloth to maintain the brightness of the
LI
surface.
8. Please follow the instructions and trouble-shootings to adjust the product. Other
improper adjustment may result in damage. Any further adjustment must be
performed or conducted by a qualified technician.
9. Please unplug the power if long-term no-use, or thunder weather.
YP-01140103
1
Contents
1. PRODUCT DESCRIPTION ------------------------------------------ 3
T
2. REMOTE CONTROL------------------------------------------------- 5
EC
3. MATCHED CABLES--------------------------------------------------6
4. MULTI-TOUCH FUNCTION OPERATION-----------------------8
IR
5. MENU OPERATION --------------------------------------------------9
5-1.IN AV MODE----------------------------------------------------9
D
5-2.IN PC MODE----------------------------------------------------9
T
5-3.IN DVI & HDMI MODE--------------------------------------9
U
5-4.SETTING ITEMS LIST--------------------------------------- 10
IP
6. ACCESSORIES -------------------------------------------------------11
7. PARAMETER ---------------------------------------------------------12
LL
8. TROUBLESHOOTING ----------------------------------------------12
LI
9. REMARK---------------------------------------------------------------13
2
U
T
D
IR
EC
T
1. PRODUCT DESCRIPTION
1.-:Volume down, or value down while using menu setting functions
IP
2.+:Volume up, or value up while using menu setting functions
3.MENU:To activate OSD (on-screen display) menu; long press this button to zoom
LL
in/out pictures automatically when receiving HDMI (High-Definition Multimedia
Interface) signals
4.◄:Selection key, to select items of OSD menu. Under PC mode, press to enable
automatically phase control
LI
5.►:Selection key,
to select items of OSD menu. Press to adjust 6 levels of
brightness.
6.AV/PC:PC、DVI、VIDEO1、VIDEO2、HDMI switch
7.Infrared signal receiver (work with remote control)
8.Power ON/OFF switch
3
T
EC
IR
D
T
U
LI
LL
IP
9.USB interface(reserved)
10.Mini USB interface
11.Power input
12.DVI、HDMI input interface
13.14P SKS input interface
4
T
EC
IR
D
LI
LL
IP
U
2. REMOTE CONTROL
T
14.Mounting Process: Standard VESA Sockets (75mm)
1.MUTE
2.Video switch: PC、DVI、VIDEO1、VIDEO2、HDMI switch
3.
:Left move,Volume down or to adjust the value of setting function
4.
:Down move, to select function on OSD
5.POWER ON/OFF
6.
:UP move, to select function on OSD
7.MENU
8.
:Right move, Volume up or to adjust the value of setting function
5
3. MATCHED CABLES
D
IR
EC
T
Match cable
SKS cable:
LL
IP
U
T
1. 14P SKS Input Jack: all kinds of AV signal input, note that put it correctly into the
SKS input jack of the monitor
2. Black 9-pin VGA signal input jack
3. Yellow RCA: Video signal 1 input
4. Yellow RCA: Video signal 2 input
5. White RCA: Audio signal input
6. Black Jack: DC 12V Power input
LI
VGA cable
1. Black 9-pin VGA connector, contact to the 9-pin VGA signal input jack of SKS
cable.
2. USB end connect the USB port of computer for touch screen function.
3. 15-pin VGA signal input end connect VGA port of the computer.
6
IR
EC
T
DVI to HDMI cable:
D
1. HDMI signal input end
2. DVI signal input connect with device with DVI signal
3. USB connect with the USB port of computer for touch function
LL
IP
U
T
HDMI to HDMI cable:
LI
1. HDMI signal input end
2. HDMI signal input connect device with HDMI signal
3. USB port connect computer for touch function
7
4. MULTI-TOUCH FUNCTION OPERATION
IP
U
T
D
IR
EC
T
Before operate the multi-touch function, please make sure the operation system
is Windows 7.
Operational Process as follow:
Click START to open control panel
LI
LL
Enter Tablet PC setting
8
5. MENU OPERATION
IN PC MODE
OSD MISCELLANEOUS
LI
LL
IP
5-2.
U
T
D
IR
EC
T
Before setting the menu functions, please make sure the device is connected correctly.
When power on, press MENU on the device or on the remote control. The menu
functions setting will display on the screen.
Press buttons ►/◄ on the device or buttons ▼/▲ on the remote control to select
items. Then press + / – on the device or ►/◄on the remote control to change the
values.
5-1. IN AV MODE
5-3.
IN DVI & HDMI MODE
DVI MODE
OSD miscellaneous setting under DVI mode
9
OSD miscellaneous setting under HDMI mode
SETTING ITEMS LIST
Function
BRIGHTNESS
Brightness setting
CONTRAST
Contrast setting
SATURATION
Saturation
setting
DVI/HDMI mode)
IR
Name
D
Item
T
5-4.
EC
T
HDMI MODE
Tint
(NOT
under
U
Tint setting for image display (NOT under
IP
OSD H-position adjustment
LL
OSD V-position adjustment
PHASE
DVI/HDMI mode)
to adjust the OSD move in horizontal
direction
to adjust the OSD move in vertical
direction
to adjust the beginning point and
terminal point of image
to adjust the frequency range of image
RESET
you can reset adjustment of the unit
LI
FREQUENCY
when click “YES”
COLOR TEMPERATURE
choose color and temperature at first,
such as: 65000 K, 75000 K or 93000 K.
RED
NOTE: only if under “USER” mode,
GREEN
can adjust
RED,
GREEN and
BLUE
BLUE to meet the color value you
need.
10
Language setting: English or Japanese
MISCELLANEOUS
Move to next page for miscellaneous
setting
If select “YES” it will adjust automatic
OSD AUTO COLOR
T
LANGUAGE
color system to the best.
select “YES” to exit
OSD H-POSITION
to
adjust
the
EC
EXIT OSD
picture
position
in
horizontal direction
OSD V-POSITION
IR
to adjust the picture position in vertical
D
direction
Mode shift between 4:3 and 16:9
SHARPNESS
to adjust the level of sharpness
to
adjust
the
duration
from5-100seconds
LI
LL
IP
6. ACCESSORIES
U
OSD DURATION
T
MODE
1.Remote control
1piece
2.Manual
1copy
3.Touch pen
1piece
4.DC adapter 12V
5.14PIN SKS
6.VGA cable
1piece
1Piece
1Piece
7. HDMI to HDMI cable
8. DVI to HDMI cable
1piece
1piece
11
of
OSD
7. PARAMETER
10.1” LED (16:9)
Touch Function
Capacitive touch panel
Resolution
1024×600
Brightness
250cd/㎡
Contrast
500:1
Viewing Angle
140°/ 110°(H/V)
Color System
PAL-4.43,NTSC-3.58
Input Voltage
DC 12V
Input Signal
AV1,AV2,PC(VGA), HDMI, DVI
Power Consumption
≤9W
Audio Output
≤1.2W
Mounting Process
Standard VESA Sockets (75mm)
Feature
Multi-touch function (Windows 7 OS only!)
Dimension(LWD)
259×170×34/62mm (with bracket)
U
T
D
IR
EC
T
Panel
Weight
1092g
IP
8. TROUBLE SHOOTING
LL
1. Only black-and-white image
Check whether the level of color saturation and brightness is proper or not.
2. Power on but no picture
LI
Make sure the PC、DVI、VIDEO、HDMI cable is tightly connected exactly
correctly Make sure you are using the standard power adapter coming with the
monitor.
3. Wrong or abnormal colors
If any color is missing, check the cables to make sure it is securely connected.
Broken or loose pins in the cable connector can cause a bad connection.
4. Remote control doesn't work
Check the battery to make sure the battery is installed properly and make sure it is
not a low battery. The signal is interfered by some obstructions.
5. If any abnormal matters happened, pls enter “MENU” choose
to reset
6. If it can’t be touch, pls check the USB connects exactly correct or not.
12
9. REMARK:
If there are still any problems, you can connect with the related deals
EC
T
*If interruptive image occurs, it maybe that the VGA signal frequency isn’t matched
with normal standard
LI
LL
IP
U
T
D
IR
*It is a normal condition that some bright lines appear on the screen when you turn
the unit.
13
Download PDF