unmanaged industrial ethernet switches

PRODUCT DATASHEET
SL/SLX-5/8/9ES-1/2/3
UNMANAGED INDUSTRIAL ETHERNET SWITCHES
The SL/SLX-5ES and SL/SLX-8/9ES are 5 and 8/9
port industrial Ethernet switches that provide advanced
performance that enables you to achieve real-time
deterministic operation. These ruggedized switches are
industrial hardened to provide superior reliability. They
require no user setup and immediately start operating
as soon as you power them up. Sixnet switches are
designed to make your job easier, ensuring your system
will keep running for many years to come.
PRODUCT HIGHLIGHTS
„
Slim packaging ts on your DIN rail
„
High performance and value
„
Truly industrial hardened design
„
Plug & play saves you time and money
REAL-TIME ETHERNET PERFORMANCE
„
Fast wire-speed switching
„
Intelligent message routing - No collisions!
„
Ideal for any system
PLUG & PLAY SIMPLICITY
„
„
„
Sixnet Knows Industrial
We have been designing industrial hardware such as
Remote Terminal Units for over 30 years and have used
this expertise to design the toughest Ethernet switches
on the market. Don’’t trust your critical communications
to so-called industrial hardware from commercial
switch manufacturers. Sixnet switches give you proven
assurance that your system will keep running for
years to come.
SL Model
Auto-sensing for speed and duplex
Auto-mdi/mdix-crossover works with straight or
crossed cables
Auto-polarity corrects for crossed signals
TROUBLE FREE OPERATION
„
Ultra-reliable 1,000,000+ hours MTBF
„
Dual power inputs with industrial spike protection
„
DIN rail or direct panel mounting
„
„
UL/CSA (CUL), CE, hazardous locations (Zone 2)
and maritime rated
SLX Model
-40 to 85°C operating range (SLX models)
SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES
WWW.SIXNET.COM
UNMANAGED INDUSTRIAL ETHERNET SWITCHES SPECIFICATIONS
ETHERNET PERFORMANCE
SL/SLX-5/8/9ES-1/2/3
STANDARDS COMPLIANCE
„ Electrical safety - UL508/CSA C22.2/14, EN61010-1, CE
„
Unmanaged with 5, 8 or 9 Ethernet ports
„
Store & forward wire-speed switching
„
EMC - FCC part 15, ICES-003, EN55022, EN61000-6, CE
„
Automatic address learning, aging and migration
„
„
Full duplex operation with ow control (no collisions)
Hazardous locations: UL1604/CSA C22.2/213 (Class I, Div. 2);
EN60079-15 (Zone 2, Category 3), CE (ATEX)
„
All IEEE 802.3 Ethernet protocols supported
„
Maritime rated for marine & offshore per ABS
„
1024 MAC addresses supported
„
„
Memory bandwidth 3.2 Gbps
Eye safety (ber models) - IEC60825-1, Class 1; FDA 21 CFR
1040.10 and 1040.11
„
Typical latency (varies on load)
„
‡@
100 Mbps: 5 —s + frame time
‡@
10 Mbps: 16 —s + frame time
Ethernet isolation 1500 VRMS 1 minute
PHYSICAL
„ DIN rail or direct panel mounting
„
Ingress protection: IP30
„
Case: UL94V0 Lexan (SL) or Aluminum (SLX)
„
Weight:
o 4 oz (0.11 kg) –– SL-5ES
ETHERNET PORTS
„
Shielded RJ45 ports for 10/100BaseTX
‡Auto-negotiation
‡Auto-
MDI/MDIX-crossover for either cable type
‡Auto-polarity
corrects for crossed +/- signals
„
Fiber optic port speed 100BaseFX (100 Mbps)
„
Fiber duplex operation: Full duplex
„
Fiber wavelength: 1300 nm center (typical)
„
Fiber max. distance (full duplex) (see web for details)
‡4
o 6 oz (0.17 kg) –– SLX-5ES, SL-8/9ES
for 10 or 100 Mbps
„
o 8 oz (0.23 kg) –– SLX-8/9ES
Dimensions –– see mechanical diagram below
All specications are subject to change. Consult factory for latest info.
MECHANICAL DRAWINGS
3.79"
[9.63 cm]
3.72"
[9.45 cm]
km for multimode 50 or 62.5/125 —m (SC or ST)
‡20
km for singlemode 9 or 10/125 —m (SC or ST)
‡40
km (long haul) or more (contact Sixnet)
4.50"
[11.43 cm]
SLX with
Metal Case
SL with
Lexan Case
4.00"
[10.16 cm]
4.20"
[10.67 cm]
ETHERNET COMPLIANCE
„
IEEE 802.3 (10Mbps Ethernet supports legacy devices)
„
IEEE 802.3u (Fast Ethernet 100Mbps for newer devices)
„
IEEE 802.3x (Full-Duplex with Flow Control)
3.00"
[7.62 cm]
1.00" [2.54 cm] for 5ES
1.50" [3.81 cm) for 8/9ES
3.26"
[8.28 cm]
See the User Manual for a More Detailed Diagram
ORDERING GUIDE
POWER INPUT
„
Power input voltage: 10-30 VDC
SLX-5ES-1
„
Redundant input terminals
SLX-5ES-2SC 4 RJ45 ports and 1 mm ber SC, 4 Km
„
Input power (typical - all ports active at 100 Mbps)
SLX-5ES-2ST
‡2.0
W (5-port without ber)
SLX-5ES-3SC 4 RJ45 ports and 1 sm ber SC, 20 Km
‡3.0
W (5-port including 1 ber)
SLX-5ES-3ST
4 RJ45 ports and 1 sm ber ST, 20 Km
‡4.0
W (8-port without ber)
SLX-6ES-4/5
Dual ber - see separate datasheet
‡5.0
W (9-port including 1 ber)
SLX-8ES-1
8 RJ45 10/100 ports
„
Transient protection: 15,000 watts peak
SLX-8ES-6/7
Three ber - see separate datasheet
„
Spike protection: 5,000 watts (10 times for 10 uS)
SLX-9ES-2SC 8 RJ45 ports and 1 mm ber SC, 4 Km
ENVIRONMENTAL
SLX-9ES-2ST
5 RJ45 10/100 ports
4 RJ45 ports and 1 mm ber ST, 4 Km
8 RJ45 ports and 1 mm ber ST, 4 Km
„
Operating temperature
SLX-9ES-3SC 8 RJ45 ports and 1 sm ber SC, 20 Km
‡SL
-5ES models: -10 to +60°C
SLX-9ES-3ST
8 RJ45 ports and 1 sm ber ST, 20 Km
‡SL
-6/8/9 ES models: -40 to +60°C
SL-
w/Lexan case and limited temperature
‡SLX
ET-PS-024-02
2 Amp, AC to 24 VDC Power Supply
„
Storage temperature: -40 to +85 °C
SP-ETH-2
Dual Ethernet port surge & lightning protector
„
Humidity (non-condensing) 5 to 95% RH
„
Vibration and shock: IEC60068-2-6
models: -40 to +85°C (cold startup at -40)
Contact Sixnet for special or long haul ber transeivers up to 120 Km.
331 Ushers Road •• Ballston Lake, NY 12019 •• USA
+1.518.877.5173 •• Fax +1.518.877.8346 •• sales@sixnet.com
SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES
Datasheet SL/SLX-5/8/9ES-1/2/3
Rev. June 05, 2009
WWW.SIXNET.COM
Download PDF