PROJECT INFORMATION
HERCULUX™
Job Name
Fixture Type
H1212 SERIES – MEDIUM PROFILE HOUSING
Catalog Number
Approved by
PRODUCT FEATURES:
»»Surface ceiling mount – nominal 17"W×17"L×7"D
»»One-piece heavy duty die-cast housing
»»UV-stabilized, injection molded polycarbonate lens
»»Stainless steel Torx® fasteners
SPECIFICATIONS
HOUSING: One-piece heavy duty die-cast, low-copper aluminum housing. Housing flange interlocks around lens producing maximum moisture deflection and resistance to prying. Housing provided
with four standoff mounting holes. One 3/4" IPS tapped hole on back of housing. Two 3/4" IPS tapped and plugged holes on sides of housing – see Cross Section/Details. Standard housing in dark
bronze TGIC polyester powder coat – 5-stage pre-treatment.
REFLECTOR: High reflectance painted aluminum.
LENS: One-piece wraparound lens (UV-stabilized, high impact, virgin injection molded polycarbonate). Smooth exterior, prismatic interior. Nominal thickness: 0.125".
VISOR: One-piece injection molded opaque dark bronze polycarbonate (UV-stabilized). Optional finishes to match housing. Nominal thickness .125". Visor allows for full-cutoff light output.
GASKET: Die-cut closed cell neoprene gasket seals die-cast housing to ceiling surface. lens inset into housing and sealed to integral ledge with one “O” ring closed cell silicone gasket.
HARDWARE: Four stainless steel Torx® with center pin fasteners secure lens/visor to housing.
ELECTRICAL: Available in 3500K, 4000K, and 5000K color temperatures, 80 CRI. 120-277VAC or 347VAC, 50/60Hz electrical input with high power factor electronic, constant-current driver (>.90
PF). Standard 0-10V dimming with 1-100% range; maximum driver source of 200 μA. Optional embedded microwave motion sensor (MS) has factory default settings of 20 minute time out, dims
down to 30%.
INSTALLATION: Standard four-point mounting required for Peace of Mind Guarantee®.
PHOTOMETRICS: Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric data, please go to www.kenall.com.
WARRANTY: One (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30%
or greater.
LISTINGS: Luminaire is certified to UL Standards by Intertek Testing Laboratory for Wet Location.
LED
C
ORDERING INFORMATION (Ex: H1212DSM-PP-MB-50L40K-DV)
Model
H1212DSM
Lens Type
Finish
Lamp Type
Voltage
Options
Accessories
PP
Lens Type
PP Pearlescent Polycarbonate
Finish
DB Dark Bronze
MB Matte Black
MW Matte White
LG Light Gray
SLSilver
FG Forest Green
CC Custom Color (Consult factory)
Lamp Type
25L35K 25 Watt 3500K LED
25L40K 25 Watt 4000K LED
25L50K 25 Watt 5000K LED
50L35K 50 Watt 3500K LED
50L40K 50 Watt 3500K LED
50L40K 50 Watt 3500K LED
Options
LEL† LED Emergency Battery Backup (n/a with 50L, n/a with 347V)
MS† Motion Sensor (n/a with 347V)
BPC* Photo Control – Button Type (120 or 277V only)
FS Single Fuse & Holder
QMS† Quick Mount System (n/a with 347V) – Damp Location Only
(Mounting base ordered separately – see Accessories)
Voltage
120 120 Volts
277 277 Volts
347P 347 Volts
DVP 120-277 Volts
Accessories
9500 Torx® Screwdriver
9100C Quick Mount System Mounting Base –
for use with QMS option fixtures (n/a with 347V)
† LEL not available in conjunction with: QMS or MS option
P
n/a with BPC
* n/a with 347V or DV Voltage types
www.kenall.com
P: 800-4-Kenall
F: 262-891-9701
10200 55th Street Kenosha, Wisconsin 53144
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy
American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found
at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2016 Kenall Mfg. Co. All rights reserved.
H1212DSM-071316
For additional photometry, go to www.kenall.com
HERCULUX™
H1212 SERIES – MEDIUM PROFILE HOUSING
PERFORMANCE
Initial Delivered Lumens
Lamp Type
@ 25°C
Efficacy
(lm/W)
Input Power
(W)
Drive Current
(mA)
Estd. L70
LED Life (Hrs)
25L35K
2783
99
28
47
100,000
25L40K
2783
99
28
47
100,000
25L50K
3033
108
28
47
100,000
50L35K
4648
86
54
94
85,000
50L40K
4648
86
54
94
85,000
50L50K
5066
94
54
94
85,000
Info subject to change. Visit www.kenall.com for IES files and additional information.
Model: H1212DSM-PP-MW-50L40K-DV
1512
1134
756
378
1
2
Max Candela = 1512 Located At Horizontal Angle = 0, Vertical Angle = 0
1 - Vertical Plane Through Horizontal Angles (0-180) (Through Max. Cd.)
2 - Horizontal Cone Through Vertical Angle (0) (Through Max. Cd.)
DIMENSIONAL DATA
CROSS SECTION / DETAILS
BACK MOUNTING VIEW
12.40"
6.59"
9.50"
6.89"
12.40"
16.75"
www.kenall.com
P: 800-4-Kenall
(4) .28" Dia.
Mounting K.O.
(2) 3/4" IPS
Tapped &
Plugged Holes
(1) 3/4" IPS
Tapped Hole
F: 262-891-9701
10200 55th Street Kenosha, Wisconsin 53144
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy
American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found
at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2016 Kenall Mfg. Co. All rights reserved.
H1212DSM-071316
Download PDF