WP-8000B - ArtSound

WP-8000B
WP-8000B
User Manual
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference
Check our website for any updates of this manual: www.artsound.be
1.0 Descriptions.
WP-8000B is a remote control panel work together with
MAT-8000, which will be used as a remote source selector, volume control and local input panel. The remote
control panel is designed with LED to provide direct display of the selected sources, the up and down button will
be used increase or decrease the source input channel. A
ten levels volume control is provided over the sources. A
line input by dual RCA type connector and a microphone
input by XLR type connector are included, while both of
them are designed of level control. The communication
between the panel and the matrix is through universal
industrial standard CAT5 cable, which also is used to supply power from the matrix to this panel within 50 meters.
There are total 8 units of remote control panels could be
work together with the matrix.
2. Front panel & rear panel.
1.
2.
3.
4.
5.
6.
7.
LABEL.
The label could be end user-printed as guidance over
sources.
POWER LED.
The LED will be light on blue after power on and will
be extinguished after power off.
SOURCE CHANNEL LED.
The white LED in blue background will display the
source channel 1 to 8 as 01 to 08 and local input as L.
SOURCE UP & SOURCE DOWN.
The two buttons are used to increase or decrease the
input sources channel from 1 to 8 and local input.
LINE INPUT.
Local line input by dual RCA type connector.
MIC INPUT.
Local microphone input by XLR type connector.
MIC LEVEL.
Ten levels volume control over local microphone
input, clockwise adjustment to increase the volume
from low to high level.
1
2
3
9
1
4
8
7
5
6
8.
9.
10.
11.
12.
13.
14.
15.
MUSIC LEVEL.
Ten levels volume control over local line input,
clockwise adjustment to increase the volume from
low to high level.
SOURCE LEVEL.
Ten levels volume control over selected source output, clockwise adjustment to increase the volume
from low to high level.
JTAG CONNECTOR.
It is used to burn program.
MIC CONNECTOR.
MIC SIGNAL INPUT.
Connector to input microphone signal to the PCB
board.
SPARE AUX OUTPUT TO AMP.
SPARE 24V DC INPUT.
Extra DC 24V will be needed to power supply the
remote control panel when the communication
distance is longer than 50 meters.
Rj45 COMMUNICATION PORT.
The RJ45 port is used to communicate between the
remote control panel and the matrix, it also will be
used to power supply the panel within 50 meters.
WP-8000B
3. Connection & wiring.
1.
2.
SPARE AUX OUTPUT & SPARE 24V DC INPUT.
RJ45 COMMUNICATION PORT.
+24V2
GND
GND
AudioAudio+
GND
6
5
4
3
4.
5.
6.
2
1
3.
POWER SUPPLY.
The RJ45 port is used to communicate between the
remote control panel and the matrix, it also will
be used to power supply the panel within 50 meters. While spare DC24V input is provided for extra
power supply to the remote control as soon as the
communication distance is longer than 50 meters.
The communication cable shall be universal industrial
CAT5 cable.
LOCAL SOURCE INPUT.
The local source input through the dual RCA aux
input connector.
MICROPHONE INPUT.
The mic input’s 3 pins at the back side will be send to
the PCB board through the microphone signal input.
AUX OUTPUT.
Aux output is included in the RJ45 communication
port, a spare aux output is also provided.
485-B
485-A
RED
GND
24V1
24V1
Audio
Audio
1
2
3
4
5
6
7
8
4. Operation.
1.
2.
POWER SUPPLY.
The remote control panel will be power on whether
there is DC24V from the matrix or extra equipments.
The power indicator will be light on blue, which also
will be as status indicator to display the communication is well or not.
SOURCE SELECTION.
Total 9 sources include line 1-8 and local input could
be selected on the panel through up and down
3.
buttons. The selected source will be displayed on the
LED.
VOLUME CONTROL.
A ten levels volume control is provided for each input
includes source, local line and local microphone.
5. Specifications.
Communication Speed
57600 bps
Communication Distance ≤ 1 Km
MIC Input
10 mv
Aux Input
335 mv
Aux Output 775mV
S/N Ratio
775 mV
MIC ≥ 65 dB BGM ≥ 75 dB
THD
≤ 1% 1 KHz
Power Supply
DC 24 V
Weight
153 g
Dimensions (w x d x h)
86 x 146 x 33 (mm)
TM
Art_Sound
Discover the complete ArtSound
range at www.artsound.be
House Of Music NV
Kruishoutem, Belgium
www.artsound.be
Tel. +32 9 380 81 80
Fax. +32 9 386 12 35
info@artsound.be
Download PDF