Data/Video Specifications Projector Placement Guidelines

EPSON ELP-3000 Data/Video Projector
ring
Height
5.9 inches (14.9 cm)
Width
11.2 inches (28.5 cm)
Depth
Weight
16.3 inches (41.3 cm)
16.98 lb (7.7 kg)
Electrical
Voltage
100-120VAC and 220-240VAC f 10%
Rated frequency 50/60 Hz
Data/Video Specifications
Fuse type
250V, 6.3AT, 5 x 20 mm
Power
consumption
220W (50W in standby mode)
100 - 120 VAC 3.5 Amps, 50/60 Hz
220 - 240 VAC 1.3 Amps, 50/60 Hz
Environmental
General
Temperature
Operation: 41” to 104” F (5” to 40” C)
Storage:
-4” to 140’ F (-20’ to 60’ C)
Humidity
Operation: 20 to 80% RH, non-condensing
Storage:
10 to 90% RH, non-condensing
Type of display
Poly-si Thin Film Transistor (TFT)
Active Matrix LCD
Size of liquid
crystal panels
1.32 inches (33.6 mm)
Resolution
640 (horizontal) x 480 (vertical) pixels
Image size
21 to 300 inches (.5 to 7 meters)
Projection
distance
4 to 41 feet (1.2 to 12.4 meters)
The projector displays images at a resolution of 640 x 480
pixels. When displaying a higher resolution image, the
projector compresses it to 640 x 480.
Remote control
range
33 feet (10 meters)
The following table lists the display formats supported by
the projector.
Audio Amp
power
1W x 1W stereo
Supported Monitor Displays
computer type
IBM PC compatible
Formats
VGA, VESA, NEC,
JEGA, CGA
Apple Macintosh
Standard 8- and 24-bit
color monitor
Optical
Aspect ratio
4 x 3 (horizontal x vertical)
Zoom ratio
1:1.4
Resolutions
640x480
640x200
640x400
640x350
720x350
720x400’
800x600.
640X480
640x400
’ Compressed to 640 x 480
Projector Lamp
Model number
MSCR150E3H
Type
Life
Metal halide
Power
150W
Brightness
250 lumens maximum
Projector Placement Guidelines
Typically 600 hours
The distance between the projector and the screen
determines the actual image size. Use the following general
guidelines to determine the proper distance.
Image size (disgonsl)
Maxlmum zoom
Minimum zoom
214 inches (30 feet)
300 inches (25 feet)
204 inches
146 inches
69 inches
96 inches
42 Inches
60 inches
30 inches
21 Inches
4/95
Distance from screen
(approximate)
40 feet
27 feet
13 feet
8 feet
4 feet
ELP-3000-1
EPSON ELP-3000 Data/Video Projector
Status Lights
VGA and Monitor connector pin assignments
The status lights at the top of the projector monitor its
operation.
The VGA connector is a male video RGB, 15-pin micro-D
style connector, and the Monitor connector is a female video
RGB, Spin micro-D style connector. The pin assignments
for both connectors are as follows:
temperature light 1 power light
lamp light
6
7
A
Gmen
Flaehing gmen
ProJector and lamp are on
Projector is receiving a eignal from
the remote control
There is a pmblem with the projector
Flaehingmd
RedGND
GreenGND
Blue GND
14
15
sync input
Verficel sync input
NC
Related Documents
Engineering Change Notices
None.
Technical Information Bulletins
Pin Assignments
None.
Product Support Bulletins
The following tables describe the pin assignments for the
three connectors of the Y-cable: the LCD connector, the VGA
connector, and the Monitor connector. The pin assignments
for the VGA and Monitor connectors are identical.
None.
LCD connector pin assignments
4003816
The LCD connector is a 26-pin D-style connector. Its pin
assignments are as follows:
EPSON ELP-3000 Data/Video Projector
Owner’s Manual
PL-ELP3000
EPSON ELP-3000 Data/Video Projector
Parts Price List
TM-ELP3000
EPSON ELP-3000 Data/Video Projector
Service Manual
Related Documentation
7 IGreendigRal
9
16
Redanalog
Blue digital
17 Red digital
ELP-3000-2
15
3
4
cable ID
GND
VGA/no video cable
ID pin
26 Monochrome digital
(Hercules)
24
25
19
4/95
Download PDF