OPTIPOP R User Manual

Fiber Optic Connector Cassette Cleaning Tool User Manual
For use with US Conec Ltd. part numbers:
US Conec P/N
NTT-AT P/N
Description
6338
ATC-RE-01
Single Slot – No label
6227
ATC-RE-01
Single Slot – With USC Label
6339
ATC-RE-03
MTP Male – No label
6226
ATC-RE-03
MTP Male – With USC Label
6437
ATC-RE-02
Two Slot (LC Duplex) – No Label
6230
ATC-RE-02
Two Slot (LC Duplex) – With USC Label
6340
ATC-RE-04
MTRJ Male – No Label
6228
ATC-RE-04
MTRJ Male – With USC Label
8057
ATC-RE-03W
FTTH OptiTap Plug Connections – No Label
Thank you for your purchase of the OPTIPOP R cassette. This is the latest generation of the fiber optic
cassette cleaning tools from NTT-Advanced Technology, the world’s leading expert on fiber optic
connector cleaning solutions.
The Users Manual includes the instructions on how to properly use OPTIPOP R cassette and instructions
on how to replace the cleaning tape. Following these instructions will help you get the best cleaning
performance from your OPTIPOP R cassette and the long service life.
Screw
Window
Cover
Guide Roller
Wiping Board
Guide Roller
Winding Reel
Lever
Cassette Reel
How to Clean Connectors
How to Replace The Cassette Reel
Step 1:
Open the shutter by gripping the
lever. The shutter will open and a
new section of cleaning tape will be
available.
Step 1:
Turn the screw with a coin or flat
head screw driver.
Remove the cassette reel and
winding reel.
Step 4:
Reinsert the winding reel and cassette
reel.
Route the cleaning tape over the guide
rollers and wiping board.
Step 2:
Depress the ferrule on the cleaning
tape using same pressure as a writing
pen. Move the connector from left to
right.
When cleaning angled polished
connectors (APC), be sure to turn the
ferrule so that end face is making
contact.
Step 2 :
Pull the cleaning tape from the
winding reel
Step 5:
Re-hook the cover onto the right side of
the cassette housing.
Re-snap the tab on the left side of the
cover
Step 3 :
Load the new cleaning tape onto the
winding reel. Secure it using a
bonding tape.
Step 6 :
Engage the lever two or three times to
verify the cleaning tape is moving
smoothly.
Step 3:
Release the lever to close shutter
Caution!
•
Only use OPTIPOP R refills manufactured by NTT-Advanced Technology. Failure to use NTT-Advanced Technology
manufactured replacement refills may void the warranty.
•
Do NOT reuse cleaning tape as this may cause cross contamination and cause permanent damage.
•
A new refill is needed when the lever becomes difficult to depress.
•
Do not leave the cassette in temperatures exceeding 60˚C/140˚F for extended periods.
•
OPTIPOP R cassettes are warranted for manufacturer and material defects only. Abusive, neglect or use for unintended
purposes are not covered not covered in the warranty.
For technical support or re-ordering information, please contact US Conec Ltd at:
customerservice@usconec.com
+1.828.323.8883 (international) 1.800.769.0944 (US and Canada)
Download PDF