Enclosure and
rack systems
schneider-electric.com/en/product-category/7500-it-racks-and-accessories
Table of contents
Schneider Electric NetShelter enclosures, open frame racks, and related
products provide a complete solution to meet the challenges facing server
and networking applications in every environment.
TM
• Best-in-class NetShelter enclosures offer the most standard features to facilitate
installation and speed of deployment, integrating seamlessly with the full line of
Schneider Electric InfraStruxure components.
TM
NetShelter SX applications and selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 4
• Rack power distribution units (PDUs), jointly designed with NetShelter enclosures,
enable pinpoint control and monitoring of rack-level power.
NetShelter SX enclosure features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6
• Rack accessories provide superior cable management capabilities for
high­‑density networking and blade applications.
NetShelter SX networking enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7
NetShelter SX cable management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 8
Shelves and mounting hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 12
Rack components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 13
Open frame racks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 14
Schneider Electric enclosure and rack systems
NetShelter CX enclosure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 16
Specialty enclosures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 17
Today’s high-density server and networking applications demand a rack
infrastructure that can mount a mix of different equipment and support
high-capacity cable management in an efficient, flexible design.
Rack cooling and airflow management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 18
Rack power distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 19
LCD monitors and KVM switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 20
Racks and enclosures: the building blocks of every IT environment
NetBotz security and environmental monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 21
Trends like virtualization, consolidation, convergence, and blade server
adoption are forcing different types of equipment to share the same space.
Today’s high-density devices generate tremendous amounts of heat. Rapidly
changing business conditions require the IT environment to adapt and adjust
faster than ever, and the imperative of uninterrupted uptime now has the
corollary demand of efficiency.
NetShelter enclosure and rack accessory compatibility chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 22
Online resources. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 28
Whether it’s a network closet, server room, or data center
of any size, IT operations rely on racks and enclosures for
support, organization, and management of the rack-mount
equipment. Servers, storage, switches, routers, PDUs, console
port servers, KVM switches — today’s racks and enclosures
are expected to support a greater number and variety of
applications and devices.
Click here to access the latest electronic version of this brochure.
schneider-electric.com/en/product-category/7500-it-racks-and-accessories
2
schneider-electric.com/en/product-category/7500-it-racks-and-accessories
3
NetShelter SX applications and selection
Applications for height
Applications for depth
24U enclosures — Remote offices and
small spaces.
32.5 in. is the preferred depth for AV equipment.
42 in. is the standard depth and meets most
low- to medium-density applications.
42U enclosures — Standard height used globally,
designed to fit through standard doorways.
The world’s most versatile rack enclosure for demanding IT environments
Ready for high-density environments right out of the box, NetShelter SX rack enclosures offer the most standard features on the
market today. Influenced by 10 years of customer feedback, Schneider Electric has specifically engineered the next-generation
NetShelter SX enclosure to handle today’s power-hungry, high-density server and networking applications.
48 in. deep enclosures are becoming the new
standard because of increasing server depth
crowding cable and power space.
45U enclosures — Enclosures with additional
U-spaces for environments that standardize on
a 45U, 7 ft. enclosure height.
The NetShelter SX is the base building block of the InfraStruxure system. NetShelter SX has many inherent features that facilitate a
faster installation and reduce handling after installation, lowering your installation and operating costs. In addition, the homogenous
appearance of the NetShelter SX and its sister components in an InfraStruxure solution provides a clean, consistent look that every
first-rate data center requires.
48U enclosures — More U-spaces for more
equipment in the same footprint.
Applications for width
Rack enclosure systems for converged IT:
high-efficiency, high-density, integrated solutions
With IT hardware trending toward Converged Infrastructure (CI) and singlesource IT providers, a simplified prebuilt and pretested solution is more
standardized, better defined, and quickly becoming preferred over the numerous
combinations of IT hardware and software solutions of the past. Customers
are looking for solutions that deliver fully populated IT racks — whether to the
customer site or a co-location facility.
Schneider Electric rack systems have been pre-engineered as an optimized
system for efficiently housing multiple IT equipment types in high-density
situations. Special packaging options for NetShelter SX enable integrators to
“rack and stack” the solution for a truly end-to-end converged system delivered
prebuilt, pretested, racked, and shipped to the end customer. The packaging
provides peace of mind of safe delivery of costly IT investment and the partner
provides a choice of simplified, plug-and-play, integrated solutions.
Rack enclosure systems for server applications:
high efficiency, high density
Servers are the lifeblood of any organization’s IT operations. But keeping
today’s high-density servers up and running — keeping that lifeblood
pumping — has become more challenging than ever. Current trends, such
as virtualization, consolidation, and adoption of blade servers, mean more
devices, more power, and more heat packed into each enclosure. And that
means more cable clutter blocking proper airflow, more hot air recirculation
concerns, and more cold air leakage, leading to more inefficiency.
Schneider Electric server enclosure systems have been pre-engineered as
an optimized system to provide proper front-to-back airflow to prevent hot air
recirculation and promote efficient cable management that permits quick and
easy installation of new options as servers change.
Features
24 in. wide enclosures are the standard for most
server applications. For higher densities, a deeper
enclosure may be required.
Best-in-class design
Offers most standard features to facilitate
installation and speed of deployment.
30 in. wide enclosures offer more space for
high-capacity cable management and power
distribution. Typically, wider enclosures are used for
networking applications but the extra side space is
often requested in blade sever applications.
Guarantees compatibility with all EIA standard
19 in. rack-mount equipment — or your
money back.
Integrates seamlessly with the full line of
InfraStruxure components.
Greatest flexibility
Available in 24U, 42U, 45U, and 48U heights,
24 in. and 30 in. widths, and 32.5 in., 42 in., and
47.5 in. depths.
Easily adjustable vertical mounting rails
for equipment varying in depth.
Rapid installation of vertical rack PDUs in the
rear vertical zero-U accessory channel of
NetShelter enclosures.
Superior cable management capabilities
Accommodate high­‑density networking and blade
applications.
asy installation to enable faster and easier moves,
E
adds, and changes.
Promote proper airflow to improve cooling efficiency.
Take the NetShelter SX 3D tour.
NetShelter SKU
Height
Width
Depth
Application
AR3100
1
2
3
42U
24 in.
42 in.
Low/medium-density servers
AR3105
2
3
4
45U
24 in.
42 in.
Low/medium-density servers
AR3107
1
2
4
48U
24 in.
42 in.
Low/medium-density servers
AR3150
1
3
4
42U
30 in.
42 in.
Networking and blade applications
AR3155
3
4
45U
30 in.
42 in.
Networking and blade applications
AR3157
1
4
48U
30 in.
42 in.
Networking and blade applications
AR3300
1
3
42U
24 in.
47.5 in.
Medium/high-density servers
AR3305
3
4
45U
24 in.
47.5 in.
Medium/high-density servers
AR3307
1
3
4
48U
24 in.
47.5 in.
Medium/high-density servers
AR3350
1
3
4
42U
30 in.
47.5 in.
HD networking and blade applications
AR3355
3
4
45U
30 in.
47.5 in.
HD networking and blade applications
AR3357
1
4
48U
30 in.
47.5 in.
Networking and blade applications
AR3140
3
42U
30 in.
42 in.
High­‑density networking
AR3340
3
42U
30 in.
47.5 in.
Very-high-density networking
AR3347
48U
30 in.
47.5 in.
Very-high-density networking
AR3200
42U
24 in.
42 in.
2 x 20U compartments for colocation
AR3104
24U
24 in.
42 in.
Remote server applications
AR3810
42U
24 in.
32.5 in.
Audiovisual applications
AR3812
42U
24 in.
32.5 in.
Audiovisual applications
AR3814
24U
24 in.
32.5 in.
Audiovisual applications
1
2
3
4
schneider-electric.com/en/product-category/7500-it-racks-and-accessories
4
4
4
he following can be preconfigured without standard doors and side panels. Reference part numbers AR3_ _ _ X609 for no sides, AR3_ _ _X610 for no doors, and AR3 _ _ _
T
X617 for no sides/no doors. More configurations are available; contact your local Schneider Electric sales representative for more information.
TAA Compliant enclosure available.
White enclosure available.
Shock packaging available for shipping enclosures with up to 2,000 lbs. of equipment installed.
schneider-electric.com/en/product-category/7500-it-racks-and-accessories
5
NetShelter SX enclosure features
NetShelter SX networking enclosure
More standard features for faster installation
Optimized NetShelter SX design for enhanced networking application support and a superior
solution for side airflow Cisco Nexus , Catalyst , and MDS networking switches
®
Cable access roof
Cable access roof
• Eight cable entry slots
• Extra-large cable access slots for high­‑density
cabling and brush strips for air containment
• Toolless mounting of overhead
cable trough system
®
• Two spring-loaded pins allow for easy roof
removal and installation with cables in place
• Snap-in mounting to allow easy
roof removal and installation
with cables in place
Networking-style mounting rails
Integrated baying brackets
• Easily align rails that adjust in 0.25 in.
increments
• Preinstalled on frame, front
and back
• Left vertical mounting rail contains additional
cable channel
• Spacing options at 24 in.
• Rail position preset to accommodate Cisco
switches and cable management
• Bays with other Schneider Electric power
and cooling products
Preinstalled vertical cable managers
Preinstalled leveling feet and castors
• Front vertical mounting rails feature
preinstalled, single-sided vertical cable
managers
• Easily adjustable leveling from top-down
• Castors standard on all enclosures
• Smooth plastic fingers provide proper bend
radius for cables
oolless, zero-U accessory
T
channel
ertical mounting rails for
V
side-to-side airflow
• Toollessly mount rack PDUs
• Toollessly mount vertical
cable organizers
• Front-right vertical mounting rail open for
improved side airflow
asily adjustable
E
vertical mounting rails
AR3140 — 42U x 30 in. W x 42 in. D
AR3340 — 42U x 30 in. W x 47.5 in. D
AR3347 — 48U x 30 in. W x 47.5 in. D
• Simple screw and cam engagement
• Captive screws — no loose hardware
Side airflow cooling
• Easy visual alignment for quick adjustment
• Adjust in 0.25 in. increments through enclosure
Support cooling for small and large networking switches mounted
within an enclosure.
• Hole cutouts for 0U installation (AR8469) of
Data Distribution Cable (DDC) accessories
• Side airflow solution (AR7742/AR7747) for Cisco Nexus 7018
Half-height side panels
• Easy and safe handling
• Quick release latch
• Lockable — same key
as doors
• Enclosure width remains
the same with or without
sides attached
• Side airflow duct kit (AR7715) mounts inside 30 in. wide enclosures for
Cisco 6500 and 9500 series switches
Other standard features include:
• Side airflow duct kit (AR7725) mounts inside 30 in. wide enclosures for
Cisco Nexus 7009
• Integrated electrical bonding of sides, doors, roof, and rails to frame
• Ventilated front and rear doors
• Split-rear ventilated rear doors for better clearance in hot aisle
All solutions
• Numbered U positions front and back
• Direct cool air at the front of the enclosure directly and predictably to
the intake at the side of side airflow switches
• Open bottom for unobstructed under-floor access
• Consist of two duct assemblies that act as diverters, utilizing the existing
fan power of the switch
• 3,000 lb. static load, 2,250 lb. dynamic (rolling) load
• UL Listed
• Contain a system of baffles located throughout the enclosure to
mitigate exhaust air from recirculating back into the air intake
• Electronic Industries Association (EIA)/ECA-310-E compliant
• Meets IBC seismic requirements with proper bolt-down hardware
®
schneider-electric.com/en/product-category/7500-it-racks-and-accessories
AR3340 with AR7725 duct kits for Cisco Nexus 7009
6
schneider-electric.com/en/product-category/7500-it-racks-and-accessories
AR3340 networking enclosure
and AR7742 side airflow
solution for Nexus 7018
AR3140 networking enclosure
and AR7715 internal side airflow
duct kit for Catalyst and MDS
7
NetShelter SX cable management
NetShelter SX cable management
Toolless accessories
Server and networking applications
Vertical cable management
As the number of IT components within each rack enclosure continues to
increase, so do the number of power and data cables. Schneider Electric offers
a large selection of vertical and horizontal cable managers to address today’s
cable routing demands. From toolless-install ring-style managers for server
applications, to high­‑density finger-type managers for supporting patching and
switches, Schneider Electric is a leader in innovative, application­‑driven solutions.
Our unique overhead cable management system turns the top of the enclosure
into a cable tray, eliminating the need to use space under a raised floor and
permitting better organization in nonraised floor environments.
Schneider Electric specializes in toolless-install accessories by the use of
the zero-U channels located in the rear of every NetShelter SX enclosure.
Vertical 0U accessory channels
>
• Allows toolless mounting of vertical rack PDUs
• Toollessly mount vertical cable organizers
• Additional vertical 0U accessory channels:
- AR7502: Vertical 0U accessory channel, 42U, qty. 2
- AR7552: Vertical 0U accessory channel, 45U, qty. 2
- AR7572: Vertical 0U accessory channel, 48U, qty. 2
Schneider Electric has a strong history
supporting the server applications in data
centers around the world. The innovative,
toolless, snap-in accessories have become
the benchmark for server cable management.
- AR7511: Narrow vertical 0U accessory channel, 42U
- AR7505: Vertical cable organizer, center rear mount
R8442 — Vertical cable organizer,
A
eight cable rings, zero U
• Supports 35 to 55 CAT 6/CAT 6A data cables
• Mounts toollessly on the vertical 0U accessory channel
AR8443A — Vertical fiber organizer
Check out “Cable Management for Enclosure
and Rack Systems” for a comprehensive list of
cable management options.
• Installs toollessly
• Takes up one bay of channel
• Fiber spool only kit available (AR8444)
AR8457 — Data distribution 0U SX panel
• Installs toollessly
• Takes up one bay of channel
• Toollessly mount up to four DDC cable heads,
24 ports for rack-to-rack connections
R7710 — Cable containment brackets
A
with rack PDU mounting
High-capacity cable managers can be used
to support fiber and copper cable bundles.
• Low-profile vertical cable management
AR7580A — High-capacity vertical cable
manager for NetShelter SX 30 in. wide
enclosures (AR3x5x), supports 190 to 250 CAT
6A/CAT 6 data cables per section and 190 CAT
6A (0.25 in. to 0.30 in. dia.) per channel section.
Each kit covers one corner of the enclosure.
• Support 60 to 90 CAT 6/CAT 6A data cables
• Mount toollessly on the vertical 0U accessory channel
AR7711 — Zero-U accessory bracket
AR8443A
AR8442
AR7721
• Mounts rack PDUs in rear-facing orientation
• Supports third-party accessories in numerous
mounting configurations
AR7581A — Hinged covers for AR7580A
vertical cable managers.
AR8457
• Mounts 1U or 2U patch panels or other
networking accessories
Fiber slack spools for mounting to the vertical
mounting rails of NetShelter SX 30 in. wide
enclosures (AR3x5x).
Additional high-capacity vertical cable managers
and covers available for specific enclosure
heights, 42, 45, and 48U. Visit the website for
a complete listing.
AR8444
AR3x5x 30 in. wide
enclosure with
closed vertical
mounting rails for
server applications
AR8621 — Hook-and-loop cable managers, qty. 10
• Mount toollessly on the vertical 0U accessory channel
• Secure and bundle cables with hook-and-loop ties
R7721, 22, 23 — Low-profile vertical cable
A
managers, zero U
AR3150 with wide vertical
mounting rails shown
AR7710
• Supports up to 38 CAT 6A or 251 fiber cables
AR7711
AR8621
• Mounts toollessly on the vertical 0U accessory channel
schneider-electric.com/en/product-category/7500-it-racks-and-accessories
8
schneider-electric.com/en/product-category/7500-it-racks-and-accessories
9
NetShelter SX cable management
NetShelter SX cable management
Horizontal cable managers
Overhead cable troughs and partitions
Finger-type horizontal cable managers
• NetShelter enclosures feature the ability to
integrate a system of troughs and partitions for
routing power and data cable across the top of
the enclosures
Cable managers for patching and crossover applications featuring
smooth radius plastic fingers that protect the cable from kinking and
binding. Hinged, snap-on covers provide a clean look and retain large
cable bundles. These cable managers include hardware for double-sided
configurations with two units.
AR8603A
• AR8602A — 1U horizontal cable manager with 4 in. fingers
and snap-on cover
• Troughs and partitions reduce the need for
expensive suspended cable tray systems
• Troughs and partitions install toollessly with
snap-in tabs and have standard attachment
points for cable ladder systems
AR8605
• AR8600A — 2U horizontal cable manager with 4 in. fingers
and snap-on cover
• AR8612 — 1U horizontal cable manager with 6 in. fingers
and snap-on cover
• Enclosure troughs are shown here; for
information on power and cooling troughs and
partitions, see the Schneider Electric website
AR8606
Power cable trough
• AR8606 — 2U horizontal cable manager with 6 in. fingers
and snap-on cover
• Supports power distribution cables
• A
R8603A — 2U horizontal cable manager with 6 in. fingers,
snap-on cover, rear cable pass-through holes, and slots for
AR8008BLK/AR8016ABLK horizontal cable channel
• Provides separation from data cables
• A
R8605 — 3U horizontal cable manager with 6 in. fingers, snap-on cover,
rear cable pass-through holes, and cable channel slots
• Data cables pass through underneath
to front partitioned area
AR8425A
• AR8561— Cable trough, 24 in. enclosures
• AR8571— Cable trough, 30 in. enclosures
AR8426A
Pass-through data cable partition
Ring-type horizontal cable managers
Economical cable managers for patching applications featuring
various configurations to meet specific needs.
• Partitions the top of the enclosure
into cable routing areas
AR8428
• Pass-through hole provides cable
access into multiple cable areas
• AR8425A — 1U horizontal cable manager with four rings
• AR8426A — 2U horizontal cable manager with four rings
• AR8163ABLK — Pass-through data
partition, 24 in. enclosures
AR8427A
• AR8428 — 2U horizontal cable manager with four rings
and pass-through holes
• AR8427A — 2U horizontal cable manager with multiple rings
and small cable retainers
AR8113A
• AR8113A — Cable management rings (qty. 5 large, 5 small)
• AR7707 — Cable management rings, 8 in. deep for 30 in.
wide enclosures (AR3x5x), qty. 8
AR7707
• AR8429 — 1U cable pass-through manager with brush strip
• AR8129 — Cable management arm for use with sliding shelves
Cable Ladders and Attachment Kits
SKU
Ladder Accessories
SKU
Solid data cable partition
Cable Ladder 6 in. (AR8164AKIT
6 in. ladder with attach kit)
AR8164ABLK
Ladder Corner Clamp
AR8461
• Partitions the top of the enclosure into
cable routing areas
Cable Ladder 12 in. (AR8165AKIT
12 in. ladder with attach kit)
AR8165ABLK
Ladder Angle Clamp
AR8462
• Solid face provides clean appearance
at the front of the enclosure
Alternate Mounting —
Ladder to Power Troughs
AR8576
Ladder Stacking
AR8463
Alternate Mounting —
Ladder to Data Partitions
AR8177BLK
Ladder Wall Termination
AR8465
Ladder to NetShelter SX Roof
AR8168BLK
Ladder Clamp Kit
AR8169
Ladder Elevation Bracket
AR8186
Ladder to Two-post Rack
AR8460
• AR8172BLK — Solid data partition,
30 in. enclosures
AR8429
• AR8008BLK — Horizontal cable side channel (18 in. to 30 in.
adjustment) for routing cable front-to-back between the standard wide
rack mounting rails or AR8603 and AR8428 horizontal cable managers
Cable ladders and accessories
Cable ladders and attachment kits
for routing power and data cabling
overhead from rack to rack.
• AR8173BLK — Pass-through data
partition, 30 in. enclosures
• AR8162ABLK — Solid data partition,
24 in. enclosures
Horizontal cable management accessories
Check out Application Note #133:
“Cable Trough, Ladder, and Partition Configuration Guide.”
AR8129
• AR8016ABLK — Horizontal cable side channel (10 in. to 18 in.
adjustment) for routing cable front-to-back between the standard wide
rack mounting rails or AR8603 and AR8428 horizontal cable managers
• AR7706 — Mounting rail brush strips for 30 in. wide enclosures
(AR3x5x), qty. 6
schneider-electric.com/en/product-category/7500-it-racks-and-accessories
AR7706
AR8008BLK/AR8016ABLK
10
AR8561
AR8162ABLK
schneider-electric.com/en/product-category/7500-it-racks-and-accessories
AR8163ABLK
AR8186
11
Shelves and mounting hardware
Rack components
Mounting accessories to aid in the installation of IT equipment and secure racks into position
Shelving
Replacement doors, side panels, roofs
Rails
Fixed and sliding shelves to enable the mounting of tower units,
monitors, and other equipment into the rack environment.
Standard doors, side panels, and roofs are available for
all enclosure sizes. Check the enclosure product page
options tab for a list of these rack components.
Mounting rails
• AR8105BLK — Fixed shelf 50 lb.
• AR8122BLK — Fixed shelf 250 lb.
AR8105BLK
AR8122BLK
• AR8123BLK — Sliding shelf 100 lb.
• AR8128BLK — Sliding shelf 200 lb.
• AR7510 — 23 in. EIA
mounting rails for
42U x 30 in. wide
enclosures
• AR8422 — Double-side fixed shelf for two-post rack
• AR8126ABLK — 17 in. sliding keyboard shelf
• AR8127BLK — 19 in. sliding rotating keyboard shelf
• AR8006A — Misc. equipment support rails for
24 in. wide enclosure
Vertical EIA rail mounting
kits for different widths
and depths.
AR8128BLK
AR8422
Specialty roofs, side panels, and accessories
• AR7252 — Networking roof for high­‑density cabling 30 in. wide x 42 in. deep
AR7510
• AR7716 — Networking roof for high­‑density cabling 30 in. wide x 42 in. deep
Bolt-down and stabilization
AR8126ABLK/AR8127BLK
AR8006A
Stabilization plates and hardware to prevent tip-over in stand-alone
rack applications and meet specific anchoring requirements.
• AR7215 — NetShelter AV enclosure top mount conduit access adapter
Recessed rail kits
• AR7209 — Open roof support bridge for overhead troughs and partitions
Intermediate mounting rails for supporting
shallow depth equipment.
• AR7305A — NetShelter SX pass-through side panel 42U x 42 in. deep
• AR7313 — NetShelter SX pass-through side panel 42U x 47.5 in. deep
• AR7700 — NetShelter SX stabilization plate to prevent
tipping when sliding out equipment
• AR7315 — NetShelter SX pass-through side panel 45U x 42 in. deep
• AR7701 — NetShelter SX bolt-down kit — meets IBC
seismic requirements for moderate seismic zones
• AR7375 — NetShelter SX pass-through side panel 48U x 42 in. deep
• AR7701-S — NetShelter SX bolt-down kit — meets IBC
seismic requirements for high seismic zones
• AR7316 — NetShelter SX pass-through side panel 45U x 47.5 in. deep
• AR7314 — NetShelter SX pass-through side panel 48U x 47.5 in. deep
• AR7503 — 42U x 24 in. wide
• AR7504 — 48U x 24 in. wide
• AR7508 — 42U x 30 in. wide
• AR7578 — 48U x 30 in. wide
• AR7714 — Replacement snap-in brush strips for SX roofs
AR7701 & AR7701-S
AR7700
• ACF501 — Roof fan for 24 in. wide x 42 in. deep enclosures, 120 Vac
• ACF502 — Roof fan for 24 in. wide x 42 in. deep enclosures, 208 – 230 Vac
• ACF503 — Roof fan for 30 in. wide x 42 in. deep enclosures, 120 Vac
• ACF504 — Roof fan for 30 in. wide x 42 in. deep enclosures, 208 – 230 Vac
Miscellaneous mounting brackets
• ACF505 — Roof fan for NetShelter AV 24 in. wide x 32.5 in. deep, 115 Vac
Variety of mounting brackets for mounting IT equipment.
• AR8132A — Combination lock handle for NetShelter SX enclosures, qty. 2
• AR7711— Zero-U multipurpose accessory mounting bracket for
side mounting of 1U/2U products and rack PDUs
• AR8150BLK — 23 in. to 19 in. mounting adapter brackets for use
with AR7510 23 in. EIA mounting rails
AR7711
AR7503
AR8150BLK
AR7714
AR7209
AR7215
AR7252/AR7716
Hardware kits
Available for additional hardware needs or to accommodate
equipment mounted in varying mounting options.
• AR8100 — M6 cage nuts and screws, qty. 32
• AR8400 — #12-24 screws, qty. 100
• AR8005 — #10-32 cage nuts, qty. 36
schneider-electric.com/en/product-category/7500-it-racks-and-accessories
AR8100
12
ACF503
schneider-electric.com/en/product-category/7500-it-racks-and-accessories
AR8132A
AR7305A
13
Open frame racks
Open frame racks
Performance vertical cable manager: Accessories and applications
NetShelter two- and four-post open frame racks
AR201 — two-post rack
AR8444 — Cable slack spools
The NetShelter two- and four-post open frame racks
offer a quality solution for the economical installation
of rack-mountable equipment, where security at the
individual rack level is not required. Open frame racks
provide unobstructed airflow and fast, easy access to
installed equipment, and can be paired with highdensity vertical cable managers for maximum cable
volume. The two-post rack offers cost-conscious
customers a simple solution for supporting networking
equipment and patching applications. The four-post
rack offers more strength and features for supporting
servers and networking equipment. Recent
improvements to the four-post racks increase
cable management options and flexibility.
• Self-squaring design
• Toollessly mounts on back panel
• 45U mounting spaces (84 in. tall)
• Provides smooth radius support for cable slack
• Black finish
AR8621
— Toolless hook-and-loop cable
managers
• 6061-T6 structural grade aluminum
• Weight capacity (static load) 750 lb.
• 18 in. straps for large data cable bundles
• Various mounting positions on back
panel of vertical cable managers
AR203A/AR204A — four-post rack
• Threaded #12-24 holes (AR204A)
AR8680 — Cable divider/organizer
• Square holes for cage nuts and server mounts
(AR203A)
• For creating multiple cable pathways within
vertical cable managers
• New design for easier assembly
• Includes tie-off features for securing
cabling using toolless hook-and-loop cable
managers (AR8621)
• Steel construction
• 44U mounting spaces (84 in. tall)
• Black finish
• Multiple toolless mounting points for hook-and-loop
fasteners (AR8621) or toolless cable management
rings (AR7540)
Vertical rack PDUs and patching
• Cable management backplate (single-sided)
or midspan brackets (double-sided) allow:
• Multiposition rack PDU mounting bracket
(AR8652)
–– Toollessly mount, front or rear, multiple
vertical rack PDUs
• Reversible stabilization plates
–– 19 in. patch panels can be installed
vertically (double-sided only)
• Grounding inserts
• Weight capacity (static load) 2,000 lb.
Four-post rack accessories
VDIM33174 — 4U overhead patch frame
AR8652 — Rack PDU mounting bracket
AR8450A — Trough and partition adapter
• Weight capacity up to 33 lb.
• Mounts on sides as a spacer when using vertical
cable managers between two racks
• Provides mounting locations for overhead trough
and partition cable management system
• Attaches to cable ladder and wire basket trays
for network patching overhead row
• Mounts on face of vertical rails, perpendicular,
for single rack applications
• 19 in. frame
Performance vertical cable managers
AR8625 and AR8765 shown
Performance vertical cable managers
• Preassembled, ready for installation
• Designed to toollessly mount
Schneider Electric rack PDUs
• Fits two- and four-post open frame racks
Vertical cable managers
• Slam-to-latch full length door opens to left or right
• Unassembled option for site assembly
• Cable management backplate or midspan bracket
for toollessly mounting cable management
accessories and rack PDUs
• Fits two- and four-post open frame racks
• AR8615 — 6 in. wide, 84 in. height, single-sided
• AR8715 — 6 in. wide, 84 in. height, single-sided
• AR8625 — 6 in. wide, 84 in. height, double-sided
• AR8725 — 6 in. wide, 84 in. height, double-sided
• AR8635 — 10 in. wide, 84 in. height, single-sided
• AR8728 — 6 in. wide, 96 in. height, single-sided
• AR8645 — 10 in. wide, 84 in. height, double-sided
• AR8765 — 12 in. wide, 84 in. height, single-sided
• AR8665 — 12 in. wide, 84 in. height, single-sided
• AR8768 — 12 in. wide, 96 in. height, single-sided
• AR8675 — 12 in. wide, 84 in. height, double-sided
• AR8775 — 12 in. wide, 84 in. height, double-sided
• Cable management backplate for toollessly
mounting cable management accessories
schneider-electric.com/en/product-category/7500-it-racks-and-accessories
AR8652 mounted on right
rear corner of four-post
rack with rack PDU
14
schneider-electric.com/en/product-category/7500-it-racks-and-accessories
15
NetShelter CX enclosure
Soundproofed “server room in a box,” which allows for
IT deployment wherever and whenever it is needed
Conveniently deploy servers and networking equipment in a quiet, ventilated,
secure, and office-ready cabinet. The NetShelter CX is a cost‑effective
alternative for when there is no space, budget, or time for a traditional server
room or wiring closet.
Standard features
AR4018A – 18U
NetShelter CX features
AR4000MV
• AR100 — 13U x 23 in. wide x 25 in. deep,
wall-mount enclosure with vented sides and
glass front door
• AR4000MV-FR — Fixed rail kit for NetShelter
CX Mini provides two horizontal mounting
ledges for equipment placement. Must be
used with AR4000MV12U vertical mounting
rail kit.
• AR100HD — 13U x 23 in. wide x 25 in. deep,
wall-mount enclosure with vented sides and full
vented front door
• AR4601 — Bolt-down kit — two L-shaped
brackets secure the enclosure to the floor.
• AR8359 — Castor kit for NetShelter WX
• Cable management — Two cable ports allow passage into and out of
the enclosure for power and networking cables.
• Front wheels have 360° rotation for
maneuverability — rear wheels have fixed
front-to-back motion for stability
• Mobility — Four office-style castors.
Rear and side access:
• Detachable rear side panels, left and
right, for equipment installation and
maintenance access
• Integrated power strip — Includes three IEC outlets and two sets of
three regional-specific equipment cords. The power strip is removable
to allow installation through the rear, without power-off equipment.
Composite wood structure
Composite structure with acoustic foam
lining keeps hardware quiet and secure.
Integrated fan module
Each unit is outfitted with a fan module providing
up to 3.6 kW thermal capacity.
Grounding: All equipment installed within
a NetShelter CX should have conventional
grounding via power cables but, unlike
conventional metal-case cabinets, the
NetShelter CX has no requirement for
additional grounding in the form of ground
strapping or pipe earthing, etc. The enclosure
shell is constructed entirely from nonconductive
materials, and the rack is completely isolated
from outside contact.
• AR4601 — Bolt-down kit — two L-shaped
brackets secure the enclosure to the floor.
• AR8355 — Ventilation plates for NetShelter WX
• AR4602 — Allows use of NetShelter SX handles
including combination lock handles (AR8132A)
and NetBotz Rack Access PX-HID (AP9361).
AR4601
• AR4701 — Dust filter pack for 18 and 24U.
Increases the Ingress Protection Rating (IP) from
IP44 to IP54 and reduces the risk of dust-related
equipment issues.
• AR4702 — Dust filter pack for 38U. Includes
filters for bottom and top of enclosure air
intake holes.
• AR4703 — Fan booster increases the CX thermal
capacity by up to 40%.
AR100
AR109
• AR106 — 6U x 24 in. wide x 16 in. deep
enclosure with perforated door
• AR112 — 12U x 24 in. wide x 20 in. deep
enclosure with perforated door
• AR8213 — Roof fan tray 120V” as an accessory
for the AR106, AR109, AR112 only.
NetShelter seismic
enclosure
AR4702
AR4703
Door locking: Key-operated lock.
AR4602
16
• AR8207BLK — Roof fan tray 208/230 V
• AR109 — 9U x 24 in. wide x 16 in. deep
enclosure with perforated door
NetShelter CX accessories — 18, 24, 38U
Castors
Each unit sits on four castors, two swivel and
two fixed, for ease of deployment and mobility.
schneider-electric.com/en/product-category/7500-it-racks-and-accessories
• AR8206ABLK — Roof fan tray 120 V
• Ventilation system — The ultra-low-noise exhaust fan module has a
800 W maximum recommended total thermal load.
• Access — A detachable and lockable rear panel ensures security and
quick access to the equipment inside.
Cable management: 3 in. width, full-height
vertical 0U accessory channels located on each
side at the front, middle, and rear of the rack.
Support remote patching and networking
applications in a convenient wall-mount rack with an
easy-install rear-hinged section and reversible doors.
• AR4000MV12U — 12U vertical mounting rail
kit for NetShelter CX Mini. Converts basic
enclosure to a 12U rack enclosure.
Mobility:
• Four heavy-duty castor-type wheels
• Detachable rear fan modules give completely
open rear rack access
Cable egress
Cable egress provides discrete and quiet
exit of up to 400 CAT 5/6 cables.
NetShelter WX wall-mount enclosure
NetShelter CX Mini features
TM
Cable management
Full-height vertical cable trays, front,
middle, and rear of all units.
Zero-U rack PDU
Each unit includes a Basic Rack PDU (AP9567)
preinstalled, providing 13 available outlets with
AR4018A, 12 with AR4024A, and 11 with AR4038A.
The CX “Mini” is a purpose-built tower server enclosure aimed at
small, non-IT spaces such as home office, school, AV, small office,
and remote office environments.
Noise reduction: 18.5 dB broadband noise
reduction, measured 39 in. in front of the
enclosure (HP and Dell servers were used as
noise source in noise reduction measurements).
®
AR4024A – 24U
Specialty enclosures
NetShelter CX accessories — Mini
Floor space requirements: Enclosures are
designed to be placed directly against a wall.
Clearance of 8 inches on both sides of the
cabinet is essential for normal operation.
Cooling system: One ultra-low-noise exhaust fan
module, 1.2 kW maximum recommended total
thermal load (or 4,100 BTU/hr.). One module
with AR4018A, two with AR4024A, and three
with AR4038A.
AR4038A – 38U
NetShelter CX Mini enclosure
schneider-electric.com/en/product-category/7500-it-racks-and-accessories
Enclosure designed for
essential facilities and carrier
applications in seismic
environments. Meets NEBS test
standard GR-63-CORE Zone 4
at 1,000 lb. equipment load.
• AR2144BLK — 42U x 24 in.
wide x 42 in. deep, NEBS
enclosure, with sides.
• AR2145BLK — 42U x 24 in.
wide x 42 in. deep, NEBS
enclosure, without sides.
AR2145BLK
17
Rack cooling and airflow management
Rack power distribution
Air sealing
Global power densities are increasing and
becoming more unpredictable. Whether deploying
rack power distribution in a wiring closet, server
room, or data center, Schneider Electric offers a
consistent way to meet a variety of power density
applications up to 22 kW per strip.
Covers open rack space to prevent air recirculation
and reduce bypass airflow to improve cooling
efficiency.
• AR8136BLK — 1U toolless snap-in blanking panel,
10 pk
AR8101BLK
Schneider Electric Rack PDUs have sufficient
power and receptacle outputs to meet high kW
loads in a minimal amount of space. Their ease
of installation accelerates speed of deployment
and reduces installation costs. With advanced
rack power distribution, Schneider Electric offers
real-time remote load monitoring of connected
equipment and individual outlet power control for
remote power recycling.
• AR8136BLK200 — 1U toolless snap-in blanking
panel, 200 pk
• AR8108BLK — 1U standard metal blanking panel,
2 pk
AR8136BLK
• AR8101BLK — 1U, 2U, 4U, 8U, blanking panel kit
• AR7708 — NetShelter SX Air Recirculation
Prevention Kit for closing gaps and pass-through
holes between side panels and equipment
mounting rails
• AR7731 — NetShelter SX external air sealing kit
seals external openings at roof and floor, 10 pk
®
KoldLok raised floor grommets
Seal a variety of cutouts in a raised floor
environment to reduce cold air leakage and
improve cooling efficiency under the raised floor.
• AR7720 — Integral raised floor grommet
(enclosed) for new installation, 10 pk
• AR7730 — Surface-mount raised floor grommet
(split) for existing cables, 10 pk
• AR7740 — Extended raised floor grommet to
cover length of floor tile, 10 pk
AR7731
Side airflow cooling
• Consists of two duct assemblies that act as
diverters, utilizing the existing fan power of
the switch
Ducting only
• ACF600 — 2U rack fan panel
Vertical Exhaust Duct (VED) for NetShelter SX is
an easy-to-install, low-cost cooling option that can
increase the efficiency of the attached cooling system.
• ACF601 — Rack fan panel temperature controller
• AR7751 — VED for 24 in. enclosures, short range
• ACAC40000 — 2U vent panel with temperature
display
• AR7752 — VED for 24 in. enclosures, tall range
2U rack-mounted fan panel and accessories.
• ACAC40001 — 2U vent panel
• Schneider Electric StruxureWare for Data Centers
• Metered-by-Outlet — Provides real-time remote
monitoring of each individual outlet
AR7725
• Rack Automatic Transfer Switch — Provides
redundant power to single-corded equipment
™
For a comprehensive list of Rack PDUs,
download the latest pocket guide.
Rack PDU local display
Load indicator LEDs
AR7715
Serial connection: local configuration
and out-of-band management
User interactive
display for local access
Environmental monitoring port for
external temperature/humidity probe
• AR7753 — VED for 30 in. enclosures, short range
• AR7754 — VED for 30 in. enclosures, tall range
• AR7755 — Overhead cable extension for VED 24 in.
AP7000 Series
• AR7756 — Overhead cable extension for VED 30 in.
Local two-digit
LED current
monitoring display
VEDs also available in white.
ACF600
• Security
• Switched Rack PDU — Premium power
distribution allows remote control of individual
outlets and monitoring of aggregate current
consumption
AR7740
Rack fan panel
• Telnet, SNMP
• Metered Rack PDU — Advanced power
distribution provides real-time remote monitoring
of connected loads
AR7715
• Systems of baffles are located throughout
the enclosure to mitigate exhaust air from
recirculating back into the air intake
AR7720
• Web interface
• Basic Rack PDU — Entry-level power distribution
for rack-mount equipment
• AR7715 — Side airflow duct kit mounts inside
30 in. wide enclosures for Cisco 6509, 6513, 9509,
9513, and 9500 series switches
• AR7725 — Side airflow duct kit mounts inside
30 in. wide enclosures for Cisco Nexus 7009
series switches
Monitors input and all breakers on the strip
(local and remote) and offers user-customizable
warning and overload settings, plus automated
alarm notifications. Enables enhanced capacity
management and network management.
Manage power at the rack level
with pinpoint control
Support cooling for small and large networking
switches mounted within networking enclosures.
• AR7742 (42U)/AR7747 (48U) — Side airflow
solution for Cisco Nexus 7018 attaches to sides
of 47.5 in. deep enclosures
The Metered and Switched Rack PDU
offers advanced features to meet
today’s data center demands
Roof fan trays available for 42 in. deep enclosures,
see “Rack components” on page 13.
schneider-electric.com/en/product-category/7500-it-racks-and-accessories
AR7751 and AR7755
installed on AR3300 with
cable management
18
AP8000 Series
Network management: access,
configure, and receive warnings
from remote locations via Web,
SNMP, and Telnet
schneider-electric.com/en/product-category/7500-it-racks-and-accessories
CAN In/Out ports for
future functionality
Local USB port for flashing firmware
updates and downloading data/event
logs (not to be used as serial port)
19
LCD monitors and KVM switches
NetBotz security and environmental monitoring
Security and environmental monitoring for network closets to data centers
Optimize rack space.
Maximize system visibility.
NetBotz
Rack LCD Consoles include a keyboard, mouse,
17 in./19 in. LCD console, and optional integrated
8/16 port analog KVM switch (17 in. model only),
all in a compact 1U design. This compact design
allows a KVM switch to be mounted in the rear of
the Rack LCD Console or eliminate the need for
a separate KVM switch altogether by choosing
a Rack LCD Console with integrated 8/16 port
analog KVM switch. The console is easily installed
and minimizes support and maintenance costs,
ensuring lower cost of ownership. The ultra-thin
LCD screen, touch pad technology, and easy-toinstall single user rack-mount kit combine to form
a high-quality, streamlined solution built for server
management. The Rack LCD Consoles can be
used in a variety of IT environments, from computer
rooms to large data centers.
Surveillance:
• Leverage NetBotz , Pelco IP, and CCTV camera
technology to monitor IT assets remotely
TM
Management capabilities:
• Alarming allows alerts, multiple notification
methods, scheduling, graph and video
attachments, and escalation
AP5808
LCD Console
SKU
17 in.Rack LCD Console
AP5717
19 in. Rack LCD Console
AP5719
TM
• StruxureWare Central available for centralized
monitoring of multiple appliances
LCD Console with Integrated KVM Switch
SKU
17 in. Rack LCD Console with Integrated 8-Port KVM Switch
AP5808
17 in. Rack LCD Console with Integrated 16-Port KVM Switch
AP5816
KVM USB Cable, 6 ft.
AP5821
KVM USB Cable, 12 ft.
AP5822
KVM USB Cable, 25 ft.
AP5823
Environmental monitoring:
• Wide range of sensor support to monitor the
health of your IT assets
NBWL0455
NBPD0155
• Temperature, humidity, leak, door, smoke,
vibration, dew point, airflow, dry contact,
4 – 20 mA, and 0 – 5 V
NBPD0160
Access control:
• Control and manage access privileges for
NetShelter SX enclosures over the network
• Ultra-thin 17 in. or 19 in. LCD monitor
• Integrated keyboard with number pad
NBRK0201
• USB port for external media
• Space-saving 1U design
AP5816
• Touch pad mouse
• Easy to install
NBRK0451
KVM Switches with CAT-5 Type Connection
SKU
Access your servers across the room
or across the world.
32-Port Digital Enterprise IP KVM with Virtual Media, Two Remote Users
KVM2132P
16-Port Digital Enterprise IP KVM with Virtual Media, Two Remote Users
KVM2116P
Schneider Electric Rack KVM switches empower
IT administrators through both local and remote
POST- and BIOS-level access and control of
connected servers. Schneider Electric Analog,
CAT-5 Analog, and IP KVM switches help reduce
total cost of ownership — minimizing space,
hardware, electricity, and cabling by leveraging
just one keyboard, monitor, and mouse for multiple
servers. Improve return on investment and flexibility
through enterprise-level scalability with centralized
management. IT infrastructure management in
data centers, computer rooms, and remote branch
offices is now possible with greater control and
peace of mind with Rack KVM switches.
16-Port Digital IP KVM with Virtual Media, One Remote User
KVM1116P
16-Port Analog Enterprise KVM with Virtual Media, Two Local Users
KVM0216A
16-Port Analog KVM, One Local User
KVM0116A
8-Port Analog KVM, One Local User
KVM0108A
KVM USB Server Module
KVM-USB
KVM PS/2 Server Module
KVM-PS2
KVM USB Server Module with Virtual Media
KVM-USBVM
• Control and manage rack access privileges
from a Web browser
KVM PS/2 Server Module with Virtual Media
KVM-PS2VM
• Perform audit trails on rack access
KVM USB Server Module with Virtual Media and CAC Support
KVM-USBVMCAC
KVM Serial Server Module
KVM-SERIAL
• Receive alarm notification when the rack is
in a compromised security state
KVM to Rack PDU Power Management Cable
AP5641
KVM 1U Bracket for Rear Mount Behind Rack LCD Console
KVM-LCDMOUNT
KVM Access Software License Upgrade to Enterprise (1,024 Nodes)
SEKVM1024N
AP5201
Cables
KVM Switches with Coaxial-Type Connection
SKU
KVM USB Cable
8-Port Analog KVM
AP5201
KVM PS/2 Cable
16-Port Analog KVM
AP5202
KVM Daisy-chain Cable
schneider-electric.com/en/product-category/7500-it-racks-and-accessories
2 ft.
3 ft.
AP5264
AP5262
6 ft.
12 ft.
25 ft.
AP5253
AP5257
AP5261
AP5250
AP5254
AP5258
High-level security option for NetShelter SX
NetBotz rack access PX — HID system AP9361
• Configure individual HID proximity cards for
access or schedule access to equipment for
maintenance purposes
AP9361
AP9361
NetBotz rack access pod 170 — NBPD0171
• Rack access pod connects via A-Link and
mounts in the rack basement, minimizing
space usage
• Rack access solution scales easily and can be
used with any NetShelter SX brand enclosures
NBPD0171
AP5263
20
schneider-electric.com/en/product-category/7500-it-racks-and-accessories
21
NetShelter enclosure and rack accessory compatibility chart
SKU
Description
AR3100
NetShelter SX
1070 Deep
42U x 600 (W)
AR3105
NetShelter SX
1070 Deep
45U x 600 (W)
AR3107
NetShelter SX
1070 Deep
48U x 600 (W)
AR3150
NetShelter SX
1070 Deep
45U x 750 (W)
AR3155
NetShelter SX
1070 Deep
45U x 750 (W)
AR3157
NetShelter SX
1070 Deep
48U x 750 (W)
AR3300
NetShelter SX
1200 Deep
42U x 600 (W)
AR3305
NetShelter SX
1200 Deep
45U x 600 (W)
AR3307
NetShelter SX
1200 Deep
48U x 600 (W)
AR3350
NetShelter SX
1200 Deep
42U x 750 (W)
AR3355
NetShelter SX
1200 Deep
45U x 750 (W)
AR3357
NetShelter SX
1200 Deep
48U x 750 (W)
AR3140
Networking
1070 Deep
42U x 750 (W)
AR3340
Networking
1200 Deep
42U x 750 (W)
AR3347
Networking
1200 Deep
48U x 750 (W)
AR3104
NetShelter SX
1070 Deep
24U x 600 (W)
AR3200
Co-location
SX
1070 Deep
42U x 600 (W)
AR3810
AR3812
NetShelter
SX AV
825 Deep
42U x 600 (W)
AR3814
NetShelter
SX AV
825 Deep
24U x 600 (W)
Vertical Cable Management
AR7502
NetShelter SX 42U Vertical PDU Mount and Cable Organizer
•
AR7505
Rear Center Mount Cable Tree for NetShelter SX
•
AR7511
Narrow Vertical Cable Organizer, NetShelter SX, 42U
•
AR7552
Vertical Cable Organizer, NetShelter SX, 45U
AR7572
NetShelter SX 48U Vertical PDU Mount and Cable Organizer
AR7580A
AR7581A
AR7585
AR7586
AR7588
AR7589
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
NetShelter SX 750 mm Mounting Rail Brush Strips
AR7721
Vertical Cable Manager for NetShelter SX 600 mm Wide, 42U
AR7722
Vertical Cable Manager for NetShelter SX 600 mm Wide, 45U
AR7723
Vertical Cable Manager for NetShelter SX 600 mm Wide, 48U
AR8442
Vertical Cable Organizer for NetShelter 0U Channel
•
•
•
•
•
•
AR8443A
Vertical Fiber Organizer
•
•
•
•
•
AR8444
Fiber Spools
•
•
•
•
AR8008BLK
Side Channel Cable Trough
AR8016ABLK
NetShelter SX Side Channel Cable Trough
•
•
•
•
•
•
•
AR7706
•
•
•
•
•
•
•
•
•
•
•
Vertical Cable Manager for NetShelter SX 750 mm Wide 42U
(Qty 2)
Hinged Covers for NetShelter SX 750 mm Wide 42U Vertical Cable
Manager (Qty 2)
Vertical Cable Manager for NetShelter SX 750 mm Wide 45U
(Qty 2)
Hinged Covers for NetShelter SX 750 mm Wide 45U Vertical Cable
Manager (Qty 2)
Vertical Cable Manager for NetShelter SX 750 mm Wide 48U
(Qty 2)
Hinged Covers for NetShelter SX 750 mm Wide 48U Vertical Cable
Manager (Qty 2)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Rack Cooling SKUs
AR7708
NetShelter SX Air Recirculation Prevention Kit
•
•
•
•
•
•
•
•
•
•
•
•
ACF001
RM Air Distribution Unit 120 V
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ACF002
RM Air Distribution Unit 208/230 V
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ACF003
RM Air Distribution Unit 100 V
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ACF501
Netshelter SX Roof Fan Tray 115 VAC
•
•
•
•
•
ACF502
Netshelter SX Roof Fan Tray 208 – 230 VAC
•
•
•
•
•
ACF503
Netshelter SX Roof Fan Tray 115 VAC 750 mm
•
•
•
•
ACF504
Netshelter SX Roof Fan Tray 208 – 230 VAC 750 mm
•
•
•
•
AR7715
NetShelter SX Internal Side Air Flow Duct Kit
•
•
•
•
•
•
•
•
•
AR7725
NetShelter SX Internal Side Airflow Duct Kit for Nexus 7009
•
•
•
•
•
•
•
•
•
AR7742
NetShelter SX 42U Nexus 7018 Duct Kit
AR7747
NetShelter SX 48U Nexus 7018 Duct Kit
•
•
For a comprehensive list of compatible accessories, visit the www.schneider-electric.com product pages
and view the “Options” tab to search through the available options. Or download the latest compatibility chart.
schneider-electric.com/en/product-category/7500-it-racks-and-accessories
22
schneider-electric.com/en/product-category/7500-it-racks-and-accessories
23
Online resources
Help me choose
Additional resources
Visit Rack PDU selector
Click here to download White Paper #44:
“Improving Rack Cooling Performance
Using Airflow Management Blanking Panels”
See for myself
Visit Rack PDU test-drive sites
NetShelter SX multimedia product demo
Receive a guided tour of the NetShelter SX
enclosures — at your convenience. Free online
multimedia demo walks you through ease-ofuse, power distribution, cooling, and cable
management benefits. Click here.
Click here to download Application Note #133:
“Cable, Trough, Ladder, and Partition Configuration Guide”
Energy University online education
Energy University courses offer industry-leading
education for IT professionals and deliver real-world
expertise, where and when you need it.
Visit www.MyEnergyUniversity.com
TM
For our latest video content, visit
Schneider Electric TV. Click here.
Try our FREE, Web-based applications to experiment with virtualization, efficiency,
and more by visiting www.schneider-electric.com
Schneider Electric
132 Fairgrounds Rd
West Kingston, RI 02892
Phone: 877-800-4272
www.schneider-electric.com
October 2015
©2015 Schneider Electric. All Rights Reserved.
Schneider Electric, NetShelter, InfraStruxure, NetBotz, Pelco, StruxureWare, Energy University, and Life Is On Schneider Electric are trademarks
owned by Schneider Electric Industries SAS or its affiliated companies. All other trademarks are the property of their respective owners.
998-4936_GMA-US_B
This document has been
printed on recycled paper
Download PDF