Wall Mount Cabinet with Swing Frame 600 mm Deep

Rack and Ducting
Wall Mount Cabinet with
Swing Frame 600 mm Deep
AFL’s range of Swingframe Cabinets have been designed to allow easy access to the
rear of your equipment for installation and maintenance purposes.
In addition there is a 150 mm deep range and a 450 mm deep range without a
swing-frame, where floor space is at a premium. All products are available with
either a clear door or solid metal door. This enhanced range of cabinets has been
designed to cover most, if not all, communication cabinet requirements.
Features and Benefits
Rack Includes
• Rack constructed out of 1.2 mm high
strength zinc annealed steel
• Dulux powder coated
• Rack can be bought as assembled or
flat pack; comes with instructions and
assembly hardware
• Earth points x 2
• Adjustable 19” mounting rail depths
• Internal release of swingframe for
higher security
• Flush mounted pivot hinges
• The internal locking and flush hinges
negates the need to have side access
to the rack
• High security locking options
on request
• Conforms to: EIA-310-E 1996
Electronic Industries Alliance
Dimensions for Cabinets, racks and
associated equipment
• Conforms to: Din 41494-7 Dimensions
for cabinet and suite racks
• 1 x 150 mm deep mounting
swingframe base
• 1 x 450 mm 19” wall mounted rack;
6RU, 12RU, 18RU, 24RU
• 1 x door; perspex or solid (vented
available on request)
• 2 x vented top and bottom side panels
• 1 x vented top with allowance for fan
unit cooling (fans not included)
• 1 x vented base with allowance for fan
unit cooling (fans not included)
• 4 x 19” vertical mounting rails
Ordering Information
Number of
Rack Units
6 = 600 mm
6 = 600 mm
P = Perspex
M = Solid Metal
Australia: 1300 232 476 or www.AFLglobal.com/au
New Zealand: 09 927 7140 or www.AFLglobal.com/nz
© 2002-2015, AFL, all rights reserved. 0219, Revision 1, 8.10.15
Specifications are subject to change without notice.
Download PDF