900 MHz 2x2 MIMO High-Gain Antenna
Model: AMY-9M16
Ultimate in RF Performance
Easily Integrates with Rocket M900 (sold separately)
Incredible Range and Speed
The airMAX 900 MHz YAGI Antenna is a high-gain array antenna designed to seamlessly integrate with the Rocket™M900 radio
(sold separately). It features incredible range performance of 20+ km and breakthrough speed of 90+ Mbps.
The RocketM900 provides the “brains” to a very robust system. It can be paired with the airMAX 900 MHz YAGI (AMY-9M16),
or airMAX 900 MHz BaseStation Sector Antenna (AMS 900-120-13). The versatility of a RocketM900 powered system gives
architects lexibility to create robust, powerful, 2x2 MIMO solutions.
Below is an example of how the airMAX 900 MHz YAGI Antenna can be deployed:
airMAX 900 MHz
YAGI Antenna
Internet Backbone
Point to Point (PtP)
Backhaul Link
ISP Network
airMAX 900 MHz
YAGI Antenna
airMAX 900 MHz
BaseStation Sector
Point to MultiPoint
(PtMP) Links
airMAX 900 MHz
YAGI Antenna
airMAX 900 MHz
YAGI Antenna
Corporate Building
airMAX 900 MHz
YAGI Antenna
Small Business
Integrated airMAX Technology
Easy Installation
Unlike standard WiFi protocol, airMAX Time Division
Multiple Access (TDMA) protocol allows each client to send
and receive data using pre-designated time slots managed
by an intelligent AP controller. This “time slot” method
eliminates hidden node collisions and maximizes airtime
The RocketM900 radio and airMAX YAGI antenna have
been designed to seamlessly work together.
Compared to other systems in its class, the airMAX
900 MHz YAGI Antenna delivers superior performance in
latency, throughput, and scalability.
• Intelligent QoS Priority is given to voice/video for
seamless access.
• Scalability High capacity and scalability.
• Long Distance Capable of high-speed, 20+ km links.
• Low Latency Multiple features dramatically reduce
Installing the RocketM900 radio onto the YAGI antenna
requires no special tools. You simply snap it securely into
place with the Rocket mount built into the antenna.
Model Details
airMAX YAGI Antenna*
Model: AMY-9M16
• 902 - 928 MHz
• 16 dBi, Both Polarizations
Front View
Rear View
Side View
Model: M900
• 2x2 MIMO
• Low Latency
• 90+ Mbps Real TCP Throughput
• 20+ km Long Range
Front View
Side View
Rear View
*airMAX YAGI Antenna available in 2-pack
**RocketM900 sold separately
Rocket M900 System Information
Processor Specs
Atheros MIPS 24KC, 400 MHz
Memory Information
64MB SDRAM, 8MB Flash
Networking Interface
(1) 10/100 Ethernet Port
Rocket M900 Regulatory/Compliance Information
Wireless Approvals
FCC Part 15.247, IC RS210
RoHS Compliance
Rocket M900 Physical / Electrical / Environmental
Enclosure Size
16 2 x 83 x 35 mm
240 g
Enclosure Characteristics
Outdoor UV Stabilized Plastic
Mounting Kit
Pole Mounting Kit Included
Max. Power Consumption
6.5 W
Power Supply
24V, 1A PoE Supply Included
Passive Power over Ethernet (Pairs 4, 5+; 7, 8 Return)
Power Method
Operating Temperature
-30 to 75° C
Operating Humidity
5 to 95% Condensing
Shock and Vibration
airMAX 900 MHz YAGI Antenna Characteristics
Frequency Range
HPOL Beamwidth
VPOL Beamwidth
F/B Ratio
Wind Survivability
Wind Loading
Cross-pol Isolation
ETSI Speciication
902 - 928 MHz
16 dBi, Both Polarizations
29 to 34°
29 to 34°
20 dB
< 1.5:1 Over Band
1365 x 215 x 218 mm
2.5 kg
120 mph
35 ft-lbs @ 100 mph
Dual Linear
20 dB
EN 302 326 DN2
M8 U-Bolt Pole Mounting Kit Included
airMAX 900 MHz YAGI Antenna Polar Plots
Vertical Elevation
Horizontal Azimuth
Horizontal Elevation
Vertical Azimuth
Protect your networks from the most
brutal environments with Ubiquiti’s
industrial-grade shielded Ethernet
cable, TOUGHCable.
Increase Performance
Dramatically improve your
Ethernet link states, speeds, and
overall performance with Ubiquiti
Extreme Weatherproof
Designed for outdoor use,
TOUGHCables have been built to
perform even in the harshest weather
and environments.
ESD Damage Protection
Protect your networks from
devastating electrostatic discharge
(ESD) attacks.
Extended Cable Support
TOUGHCables have been developed
to increase power handling
performance for extended cable run
Bulletproof your networks
TOUGHCable is currently available in
two versions: PRO Shielding Protection
and CARRIER Shielding Protection.
TOUGHCable Connectors
Speciically designed for use with Ubiquiti TOUGHCables and available in
100-pc. bags, TOUGHCable Connectors protect against ESD attacks and Ethernet
hardware damage while allowing rapid ield deployment without soldering.
ESD attacks are the leading cause for
device failures. The diagram below
illustrates the areas vulnerable to
ESD attacks in a network.
By using a grounded Ubiquiti Power
over Ethernet (PoE) Adapter along with
Ubiquiti TOUGHCable and TOUGHCable
Connectors, you can effectively protect
against ESD attacks.
TOUGHCable PRO is a Category 5e,
outdoor, carrier-class shielded cable
with an integrated ESD drain wire.
Category 5e, outdoor, carrier-class
shielded cable that features
an integrated ESD drain wire,
anti-crosstalk divider, and secondary
shielding. It is rated to provide optimal
performance on Gigabit Ethernet
cable with
no ESD drain
Additional Information:
• 24 AWG copper conductor pairs
• 26 AWG integrated ESD drain wire
to prevent ESD attacks and damage
• PE outdoor-rated, weatherproof
• Multi-layered shielding
• Available in lengths of 1000 ft
(304.8 m)
PoE adapter with
no earth ground
PoE Adapter
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and
earth grounding must be used as conditions of product warranty. TOUGHCable is designed for outdoor
installations. It is the installer’s responsibility to follow local country regulations, including operation within
legal frequency channels, output power, indoor cabling requirements, and Dynamic Frequency Selection
(DFS) requirements.
For further information, please visit
All speciications in this document are subject to change without notice.
© 2012 Ubiquiti Networks, Inc. All rights reserved.
Download PDF