S6800A Series Switch Datasheet

MyPower S6800A Series 10G
Core Routing Switch
Datasheet
Maipu Communication Technology Co., Ltd
No. 16, Jiuxing Avenue
Hi-Tech Park
Chengdu, Sichuan Province
P. R. China
610041
Tel: (86) 28-85148850, 85148041
Fax: (86) 28-85146848, 85148139
URL: http:// www.maipu.com
Mail: overseas@maipu.com
Maipu Confidential & Proprietary Information
Page 1 of 12
All rights reserved. Printed in the People’s Republic of China.
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual
or otherwise without the prior written consent of Maipu Communication Technology Co., Ltd.
Maipu makes no representations or warranties with respect to this document contents and specifically disclaims any implied
warranties of merchantability or fitness for any specific purpose. Further, Maipu reserves the right to revise this document
and to make changes from time to time in its content without being obligated to notify any person of such revisions or
changes.
Maipu values and appreciates comments you may have concerning our products or this document. Please address comments
to:
Maipu Communication Technology Co., Ltd
No. 16, JiuXing Avenue, Hi-Tech Park
Chengdu, Sichuan Province
P. R. China
610041
Tel: (86) 28-85148850, 85148041
Fax: (86) 28-85146848, 85148139
URL: http:// www.maipu.com
Mail: overseas@maipu.com
All other products or services mentioned herein may be registered trademarks, trademarks, or service marks of their
respective manufacturers, companies, or organizations.
Maipu Confidential & Proprietary Information
Page 2 of 12
Contents
Overview...................................................................................................4
Key Features .............................................................................................6
Technical Specifications............................................................................9
Order Information ................................................................................. 11
Maipu Confidential & Proprietary Information
Page 3 of 12
MyPower S6800A Series 10G Core Routing Switch Datasheet
Overview
MyPower S6800A is a new multi-service 10G core routing switch
developed by Maipu. It adopts the ASIC+NP architecture design, provides
the stable, reliable, and secure L2/L3 data wire-speed switching services
for the next generation network, owns the advanced 10G Ethernet
technology, supports various high-density interface board, and meets the
high-density, high-throughput and no-block switching requirements of the
core devices at the core layer. S6800A provides the new-generation core
data switching service technology for the enterprise network with the
services as the core. It supports the chassis with two slots, four slots,
eight slots, and 16 slots respectively and provide the Tbps-level backplane
bandwidth and switching capacity.
S6800A adopts the carrier-class reliability design and passive backplane
technology and supports the control redundancy, switching redundancy,
and power redundancy. Its board card, fan, and power supply are hotswappable. Besides, it supports the STP/RSTP/MSTP/VRRP/EIPS protocols
to realize the link redundancy and ensure that the services are not
disconnected when the network fails in various networking modes. S6800A
provides rich functions. For example, the hardware supports V6; provides
various
IPv6
IPv6Ready2
networking
modes
authentication);
and
service
supports
applications
(via
L2/L3/star/ring/tree
the
MAN
networking technologies and Metro-E features (via MEF-9 and MEF-14
authentication); provides the MPLS L2/L3 VPN networking function, perfect
security features (supporting FW/VPN/IPS/NTA value-added services),
various flow classification technologies, QoS technologies, and multicast
supporting technologies.
As the network core data switching platform, S6800A can cooperate with
the other series switches of Maipu to provide a full range of MAN, LAN, and
WAN solutions for the sectors of operators, financial services, government,
energy, transportation, education, military, large and medium-sized
Maipu Confidential & Proprietary Information
Page 4 of 12
MyPower S6800A Series 10G Core Routing Switch Datasheet
enterprises. It is widely used in the data center, production network core,
district network core, and IP MAN core of the foregoing sectors.
MyPower S6800A
Maipu Confidential & Proprietary Information
Page 5 of 12
MyPower S6800A Series 10G Core Routing Switch Datasheet
Key Features

Advanced hardware structure to ensure Tbps-level backplane
and switching capacity
S6800A switch adopts the ASIC+NP structure, provides passive copper
backplane, realizes the intra-board and inter-board L2/L3 wire-speed
distributed forwarding via Crossbar switching matrix, and performs highspeed route searching via powerful ASIC chip, thereby improving the
forwarding performance and expanding capability greatly, reaching the
Tbps-level backplane bandwidth and switching capacity, and providing
advanced 10G Ethernet supporting, as well as high-density interface board
to meet the high-density and high-throughput requirements of the devices
at the core layer.

Separate the switching unit from the control unit, ensuring no
packet loss
MyPower S6800A adopts the technology of separating the control card and
the switching card. When the control card fails and performs the
redundant switching, it does not affect the data forwarding of the
switching card and the data of the service cards is still forwarded normally
on the switching card, so as to reach the high-reliability requirement of no
packet loss.

Virtual Stacking Technology (VST)
MyPower S6800A Supports Virtual Stacking Technology(VST) which can be
used in Datacenter or Campus LAN Environment. Two S6800 can be
stacked as one physical core switch, by this way, customers do not need
to use spanning tree protection technology which make the topology more
complicated, VST technology is an ideal technology make the LAN topology
more simple and greatly decrease the workload of management.
Maipu Confidential & Proprietary Information
Page 6 of 12
MyPower S6800A Series 10G Core Routing Switch Datasheet

50ms network recovering capability, ensuring that the service
is not disconnected forever
50ms network recovering capability is the telecom network reliability
requirement.
Maipu
realizes
the
Ethernet
fast
network
recovering
capability via the private technology EIPS so that the IP network fault
recovering capability improves from tens of seconds to 50ms, ensuring
that the service recovers fast and the service is online forever.

High-performance 80G interface wire-speed service card,
making the network architecture more simple
The advanced Gigabit system design capability of Maipu realizes that the
board supports eight 10Gigabit wire-speed interfaces. As the network core
switching platform, S6800 reduces the network hierarchy and network
devices via high-density Gigabit access capability, so as to make the
network architecture more simple.

Rich Ethernet OAM features, making Ethernet manageable
S6800A supports IEEE802.1ag, IEEE802.3ah, and E-LMI standard Ethernet
OAM protocols so that Ethernet devices and Ethernet network have the
link status, interface status, and network auto configured management
capability. Moreover, S6800 provides IPFIX and SLA functions so that
Ethernet has the complete promise service capability.

Stable core guarantee mechanism and the redundancy for key
components to ensure the carrier-class reliability of the core
devices
All key components of S6800A provide the dual-redundancy or multiredundancy. S6800 supports power redundancy, management module
redundancy, switching matrix redundancy, and link redundancy. The
power module, fan module, and all service cards of S6800A are hotswappable, ensuring that the services are not interrupted forever. The
special dual-engine backup design ensures the carrier-class reliability of
the core switching platform.

Hardware supports distributed IPv6/MPLS wire-speed
forwarding
Maipu Confidential & Proprietary Information
Page 7 of 12
MyPower S6800A Series 10G Core Routing Switch Datasheet
Each wire card of S6800A has the hardware IPv6/MPLS capability,
including protocol/function processing, and data forwarding, which avoids
the bottleneck and delay problems of the centralized forwarding, provides
the strong guarantee for the large-scale commercial applications of
IPv6/MPLS, and meets the different IPv6/MPLS applications.

Perfect network security features ensure that the core devices
can provide the complete anti-attack and anti-virus capability
S6800A adopts excellent security design; supports SNMP V3 based on user
security policy,
MAC+IP+VLAN
binding, and
802.1X
authentication;
supports the security policies such as anti network storm attack, anti
DOS/DDOS attack, anti ARP attack, anti-scan pry attack, anti freaky
packet attack, and anti network protocol packet attack to prevent attacks
and virus efficiently. It is suitable for large-scale, multi-service, and
complicated-flow networks.

Low-power consumption and lead-free ROSH design
According to 10℃ rule, the reliability and life of semiconductor chip are
related with working temperature. The working temperature increases
10℃ and the reliability of semiconductor reduces a half, while the working
temperature and power consumption are in direct proportion. The
maximum power consumption of MyPower S6800A series 10G core routing
switch is lower than 1800W, while the lower-power consumption design of
S6800A makes the temperature of the board card semiconductor chip
lower. Therefore, the low-power consumption design improves the use life
and stable running of high-end devices, saves the running energy
consumption of devices, and meets the green environmental protection
requirements.
Maipu Confidential & Proprietary Information
Page 8 of 12
MyPower S6800A Series 10G Core Routing Switch Datasheet
Technical Specifications
Product
Chassis
MyPower S6800A Series
SM6800-02A
SM6800-04A
SM6800-08A
SM6800-16A
Chassis configuration
Structure
Rack/modular distributed structure design
Slots of the
device
4
8
12
20
Control slots
2
2
2
2
Service slots
2
4
8
16
Switching
slots
/
2
2
2
Console port
1
Out-band
interface
1
Hot swap
The power supply, fan and board cards support hot-swap.
Power supply
redundancy
Supports power supply redundancy (N+M)
Switching
Card
redundancy
/
Supports dual switching card redundancy
Supports dual control card redundancy
Control Card
redundancy
Performance (SM6800-02A-MF/ SM6800-04A-MF/ SM6800-08A-MF/ SM6800-16A-MF)
Switch
capacity
512Gbps
1Tbps
2Tbps
2Tbps
IPv4
throughput
238Mbps
476Mpps
953Mpps
953Mpps
IPv6
throughput
238Mbps
476Mpps
953Mpps
953Mpps
>200,000 hours
Average nonfault time
Standards & protocols
L2 protocol
50ms ring
protection
IPv4 L3
protocol
802.1X, VLAN, PVLAN, STP, RSTP, MSTP, port mirroring, IGMP Snooping,
GVRP, Broadcast Storm Control, QINQ , VLAN Translation, AAA function,
port binding, address filter, supports cross-board port/flow mirroring,
supports RSPAN, IP-based ACL, MAC-based ACL, MAC+IP-based ACL, and
Jumbo Frame
Ethernet Intelligent Protection Switching(EIPS)
Static route, RIPv1/v2, OSPF, BGP4, IGMP, PIM-SM, PIM-DM, MBGP, VRRP,
equivalent route, policy route, Graceful Restart
Maipu Confidential & Proprietary Information
Page 9 of 12
MyPower S6800A Series 10G Core Routing Switch Datasheet
IPv6 L3
protocol
QoS
Upper layer
application
MPLS
deployment
Supports ICMPv6, ICMPv6 redirection, DHCPv6, ACLv6, OSPFv3, RIPng,
BGP4+, IS-ISv6, manual tunnel, ISATAP, 6to4 tunnel, IPv6 and IPv4 dual
stack
Supports Diff-serv/QOS, flow monitoring (CAR), SP, WRR, SP+WRR queue
scheduling algorithm, 802.1P/DSCP/TOS, queue scheduling mechanism,
Two rate Three color (trTcm)
DHCP/DHCP Option82/DHCP Relay/DHCP Snooping, IGMPv1/v2/v3,
IGMPv1/v2/v3 Snooping, PIM-SM/PIM-DM/PIM-SSM, PIM-SMv6, PIM-DMv6,
PIM-SSMv6
MPLS L3 VPN, MPLS L2 VPN, MPLS TE, VPLS (for –A and –B module)
Stacking
SSH, ACL flow filtering mechanism, ACL, ARP, SNMPv3, Radius usergraded login authentication, TACACS+, access table host access control,
data log, IP address/VLAN ID/MAC address/port binding, packet filtering,
packet filtering of application layer
Maipu Virtual Stacking Technology (VST)
System
management
SHELL, TELNET, FTP, SNMP V1/V2/V3, network management software,
third-party software, IPFIX (Netflow), NTP clock
IEEE
standards
IEEE
IEEE
IEEE
IEEE
IEEE
IEEE
IEEE
Security
mechanism
802.3 (10BASE-T) IEEE 802.3u (100BASE-T)
802.3z (1000BASE-X) IEEE 802.3ab (1000BASE-T)
802.3ae (10G BASE) IEEE 802.1ad (Q in Q)
802.3ad (Link Aggregation) IEEE 802.3x (Flow Control)
802.1d (STP) IEEE 802.1Q (Virtual LAN)
802.1w (RSTP) IEEE 802.1s (MSTP)
802.1p (COS priority) IEEE 802.1x (port authentication)
Physical index
Dimension
(W× D× H)
Power supply
444x600x110
Input voltage
(AC)
100-240V, 50-60Hz
444x600x310
444x600x577
444x600x977
Input voltage
-40~-57V
(DC)
Environment parameters
Working
temperature
0~55℃
Working
humidity
10-90% no-condensing
Maipu Confidential & Proprietary Information
Page 10 of 12
MyPower S6800A Series 10G Core Routing Switch Datasheet
Order Information
Model
Description
MyPower S6800A
Chassis and power supply
SM6800-02A chassis, 4 slots, 2 service slots (including backplane and
SM6800-02A-MF
fan slots)
SM6800-04A chassis, 8 slots, 4 service slots (including backplane and
SM6800-04A-MF
fan slots)
SM6800-08A-MF
SM6800-08A chassis, 12 slots, 8 service slots (including backplane and
fan slots)
SM6800-16A-MF
SM6800-16A chassis, 20 slots, 16 service slots (including backplane
and fan slots)
Control module, supporting active/standby backup function (one is
mandatory, 1+1 redundancy is optional) (for slot 2/4),one 1G DDR
SM68A-MPUAH
memory should be configured
Control module, supporting active/standby backup function (one is
mandatory, 1+1 redundancy is optional) (for slot 8/16) ,two 1G DDR
SM68A-MPUBH
memory should be configured
Switching module; one is optional; 1+1 redundancy is optional (for
SM68A-SFUAH
slot 4)
Switching module; one is optional; 1+1 redundancy is optional (for
SM68A-SFUBH
slot 8/16)
FAN-3B-01
2-slot chassis fan module
FAN-7A-01
4-slot chassis fan module
FAN-13A-01
8-slot chassis fan module
FAN-22A-01
16-slot chassis fan module (need 2 fans for SM6800-16A chassis)
AD1000-1S007Z
1000W AC power module
AD600-1S007Z
600W AC power module
DD600-1S007Z
600W DC power module
SM6800A-SIUH
Liquid crystal display card
Standard Ethernet interface card
24-port 1000M optical interface (the SFP optical module needs to be
SM68A-24GEFH
configured) ,Fixed 1G memory
SM68A-24GETH
24-port 1000M electric interface module, Fixed 1G memory, Non-POE
SM68A24GET24GEFH
24-port 1000M optical interface (the SFP optical module needs to be
configured) + 24-port 1000M electric interface, Fixed 1G memory
SM68A-48GETH
48-port 1000M electric interface module, Fixed 1G memory, Non-POE
24-port 1000M optical interface (the SFP optical module needs to be
configured) ,Fixed 1G memory
SM68A-48GEFH
SM68A24GEF2XGEFH
24-port 1000M optical interface (the SFP optical module needs to be
configured) + 2-port 10G XFP interface, Fixed 1G memory
-A Enhanced Ethernet interface card (MPLS Support)
24-port 1000M optical interface (the SFP optical module needs to be
SM68A-24GEFH-A
configured) ,1G memory should be configured
24-port 1000M electric interface module; up to three POE modules can
SM68A-24GETH-A
be configured ,1G memory should be configured
SM68A24-port 1000M optical interface (the SFP optical module needs to be
Maipu Confidential & Proprietary Information
Page 11 of 12
MyPower S6800A Series 10G Core Routing Switch Datasheet
24GET24GEFH-A
configured) + 24-port 1000M electric interface; up to three POE
modules can be configured ,1G memory should be configured
48-port 1000M electric interface; up to six POE modules can be
SM68A-48GETH-A
configured. 1G memory should be configured
48-port 1000M optical interface module (SFP optical module needs to
SM68A-48GEFH-A
be configured) ,1G memory should be configured
2-port 10G XFP interface (the XFP optical port module needs to be
SM68A-2XGEFH-A
configured) ,1G memory should be configured
4-port 10G XFP interface (the XFP optical port module needs to be
SM68A-4XGEFH-A
configured) ,1G memory should be configured
8-port 10G XFP interface (the XFP optical port module needs to be
SM68A-8XGEFH-A
configured) ,1G memory should be configured
-B High-performance Ethernet interface card (Large Entry, MPLS Support)
24-port 1000M optical interface (the SFP optical module needs to be
SM68A-24GEFH-B
configured) ,1G memory should be configured
24-port 1000M electric interface module; up to three POE modules can
SM68A-24GETH-B
be configured. 1G memory should be configured
24-port 1000M optical interface (the SFP optical module needs to be
SM68Aconfigured) + 24-port 1000M electric interface; up to three POE
24GET24GEFH-B
modules can be configured. 1G memory should be configured
48-port 1000M electric interface; up to six POE modules can be
SM68A-48GETH-B
configured. 1G memory should be configured
48-port 1000M optical interface module (SFP optical module needs to
SM68A-48GEFH-B
be configured) ,1G memory should be configured
2-port 10G XFP interface (the XFP optical port module needs to be
SM68A-2XGEFH-B
configured) ,1G memory should be configured
4-port 10G XFP interface (the XFP optical port module needs to be
SM68A-4XGEFH-B
configured) ,1G memory should be configured
8-port 10G XFP interface (the XFP optical port module needs to be
SM68A-8XGEFH-B
configured) ,1G memory should be configured
POE module
POE power module, supporting eight Ethernet ports and each port is
POE15-8PSE
15W at most; do not support hot-swap
Storage module
CF-1GB
1G CF card
CF-2GB
2G CF card
DDR333-1024S
1G memory
Maipu Confidential & Proprietary Information
Page 12 of 12
Download PDF