SPK-TT820 Portable Turntable

Portable Turntable
- Read all instructions carefully before use.
- Retain manuals for future reference.
- Use this product only in the manner described.
- Only use a water-dampened soft-cloth to clean the surface of this product.
- The following will damage this product: any liquid such as water or moisture, extreme heat; cold;
humidity, dusty or sandy environments.
- Only place this device on stable surfaces and ensure that any attached cables are secure and will not
cause the device to fall.
- There are no user serviceable parts in this product.
- Un-authorized attempts to dismantle or repair this product will void product warranty
- Using this device near other electronic devices may cause interference.
Operation - Front Panel
Dust cover latch
Dust cover
Power light
Volume control
Headphone jack
Micro SD Card Slot
USB Socket
Tone arm
Carry handle
Turn table plate
selection button
Next track
Play / Pause / Delete
Previous Track
AUX In (3.5mm jack)
18/19 Line output (RCA)
Power in
Accessories Included
Power adaptor, User manual
Playing A Record
1) Place your record on the turntable.
2) Select the correct playing speed (33.3, 45 or 78 rpm)
(Note: this speed needs to match the speed rating of your record)
3) Turn the power on
4) Release the arm lock.
5) Engage the arm raising lever, position the needle over the record and using the arm lever, lower the
needle onto the record.
Record your record to external storage
1) Begin playing your record as per the steps above
2) Insert a USB Drive or Micro SD Card then press and hold the REC button.
3) A confirmation tone will sound when recording has begun.
4) Recording will stop when either the REC button is pressed again or the tone-arm is raised.
(Another confirmation tone will sound when this occurs)
Playing files via a USB drive or Micro SD Card
1) Turn your turntable on and insert your USB Drive or Micro SD Card.
2) Playback from your external storage device should begin straight away.
* Files which have been recorded to your external storage using your turntable (only) can be deleted
during playback. Simply press the DEL button to delete the current file which is on playback.
Record playback just be stopped for this external storage file playback to function correctly.
Select USB using the MODE button if playback has not begun automatically.
1) Press the MODE button until BLUETOOTH mode is announced.
2) Turn the BLUETOOTH feature on, on your portable device and pair with the turntable.
3) You can now playback music through the turntable from your portable device.
Connect your Turntable to an External speaker system (via RCA output)
You can use the LINE OUT socket (Red and white RCA sockets) at the back of the turntable to connect
your turntable to an external speaker system. (Cable not supplied)
Rechargeable Battery
This portable turn table has a built in battery so you can use it on the go. To charge the battery simply
plug in the power adapter. When fully charged the LED power indicator will turn GREEN.
Unlock the tone-arm
Unlock the tone-arm
Lift the front tab to
remove Stylus
Carefully remove
Connect the cables for
the new Stylus
Position the stylus
correctly to insert
Position the Stylus
from the back first
Then push the front to
click into place
- Keep your records clean by occasionally wiping them with an anti-static cloth
- Pick off any dust which may occasionally accumulate on the stylus.
- A very soft brush dipped in alcohol can be used to clean the stylus by wiping in from back to the front.
- When transporting your record player do not forget to replace the protective cap on the stylus and
engage the tone-arm clip.
Warranty Against Defects
Laser Corporation Pty Ltd (“Laser”) warrants your new product to be free from defects in materials and
workmanship for 12 months, from the date of purchase, provided that the product is used in accordance with
accompanying recommendations or instructions where provided. The benefit of this warranty is in addition to
your rights under the Australian Consumer Law and to other rights and remedies of the consumer under a law in
relation to the goods or services to which the warranty relates.
Through a network of retailers and resellers, Laser will provide you with your choice of a repair, exchange (where
possible) or refund (within Dead on Arrival period) for this product if it becomes defective within the warranty
period.This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse,
normal wear and tear, neglect or improper storage. Please retain your receipt as proof of purchase
How to make a product warranty claim:
Step 1: Find your receipt which proves the date of purchase. Where the date of purchase cannot be verified,
your place of purchase or Laser will make an assessment based on the date of manufacture, the condition of the
Laser Product and the type of defect.
Step 2a): Contact your place of purchase. They will assess the nature of the fault and repair, replace or fund the
product as per their store refund or warranty policy. Step 2b): If your place of purchase cannot be contacted,
then you can contact Laser. Customer Service with details of your defective Laser Product: Phone: (02) 9870 3388;
or Email: support@laserco.com.au or online www.laserco.com.au/warranty (click on “Consumers (End Users)”).
Our business address is at 1/6-8 Byfield Street, North Ryde, NSW 2113. Step 3: Laser will issue you with a Return
Authorisation (RA) number within 48 hours. When requested, send us the defective Product and a copy of your
receipt. Laser will cover the cost of the return delivery. Step 4: Wait for us to contact you. Once we have
received your defective Laser Product for inspection, we will inform you of our assessment of your claim within 7
days. When we contact you, we will firstly let you know whether you have a valid claim under this Warranty, and
if so, we will inform you whether your defective Laser Product will be replaced or repaired, together with the
number of days you can expect to wait to receive your replaced or repaired Laser Product. Step 5:
further details on warranty cover and returns, please check Terms and Conditions for Warranty Returns section
on http://www.laserco.com.au/warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.
Download PDF