PT-TW343R Series - Panasonic Global

Specifications
Model
PT-TW343R
Power supply
Power consumption
LCD panel
AC100–240 V 50 Hz/60 Hz
300 W (6 W with Standby mode set to Normal, 0.5 W with Standby mode set to Eco*1)
Transparent LCD panel (× 3, R/G/B)
Active matrix method
15.0 mm (0.59 inches) diagonal (16:10 aspect ratio)
16.0 mm (0.63 inches) diagonal (4:3 aspect ratio)
786,432 (1,024 × 768)
1,024,000 (1,280 × 800)
Fixed zoom, Manual focus lens, F = 1.8, f = 6.08 mm, Throw Ratio: 0.46:1
1.27–2.54 m (50–100 inches) diagonally, 16:10 aspect ratio
1.27–2.54 m (50–100 inches) diagonally, 4:3 aspect ratio
1,280 × 800 pixels (Input signals that exceed this resolution will be converted to 1,280 × 800 pixels.)
1,024 × 768 pixels (Input signals that exceed this resolution will be converted to 1,024 × 768 pixels.)
3,300 lm
3,800 lm
3,200 lm
230 W × 1 lamp
Normal: 5000 h/Eco1: 6000 h/Eco2: 10,000 h
80 %
12,000:1 (all white/all black, Iris: On) (Image mode: Dynamic, Lamp control: Normal)
525i(480i)*3, 625i(576i)*3, 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i,1125(1080)/50i, 1125(1080)/60p, 1125(1080)/50p, 1125(1080)/24p, 1125(1080)/25p, 1125(1080)/24sF,
1125(1080)/30p, VGA size (640 dots × 480 dots)–WUXGA (1,920 dots × 1,200 dots), dot clock: 25-162 MHz
fH : 15–91 kHz, fV: 24–85 Hz, dot clock: 162 MHz or lower
fH: 15.73 kHz, fV: 59.94 Hz [525i (480i)],
fH: 15.63 kHz, fV: 50 Hz [625i (576i)],
fH: 31.47 kHz, fV: 59.94 Hz [525p (480p)],
fH: 31.25 kHz, fV: 50 Hz [625p (576p)],
fH: 45.00 kHz, fV: 60 Hz [750 (720)/60p],
fH: 37.50 kHz, fV: 50 Hz [750 (720)/50p],
fH: 33.75 kHz, fV: 60 Hz [1125 (1080)/60i],
fH: 28.13 kHz, fV: 50 Hz [1125 (1080)/50i],
fH: 28.13 kHz, fV: 25 Hz [1125 (1080)/25p], fH: 27.00 kHz, fV: 24 Hz [1125 (1080)/24p], fH: 27.00 kHz, fV: 48 Hz [1125 (1080)/24sF], fH: 33.75 kHz, fV: 30 Hz [1125 (1080)/30p],
fH: 67.50 kHz, fV: 60 Hz [1125 (1080)/60p], fH: 56.25 kHz, fV: 50 Hz [1125 (1080)/50p]
fH : 15.73 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH : 15.63 kHz, fV: 50 Hz [PAL/SECAM/PAL-N]
±15° (Auto, Manual)
±15° (Manual)
Ceiling/floor, front/rear
HDMI 19-pin × 1 HDCP compatible, Deep Color compatible, Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
D-sub HD 15-pin (female) × 1 [RGB/S-Video/Y·PB(CB)·PR(CR)]
D-sub HD 15-pin (female) × 1 [RGB]
D-sub HD 15-pin (female) × 1 [RGB/Monitor output]
Pin jack × 1
M3 (L,R) × 1
Pin jack × 2 (L,R)
M3 (L,R) × 1 (variable)
RJ-45 (× 1), for network connections, 10Base-T/100Base-TX, PJLink™ (class 1) compatible
D-Sub 9-pin (female) × 1, for external control (RS-232C compatible)
1 (Memory Viewer/Wireless Module, DC 5 V, max. 500 mA)
1 (USB Display)
1 (for Interactive function)
—
10 W (monaural)
Normal: 37 dB, Eco1: 33 dB, Eco2: 28 dB
Molded plastic (PC)
335 mm × 134.1 mm (with legs at shortest position) × 329 mm
Approx. 3.9 kg
Operating environment temperature: Normal use: 5 °C (41 °F) to 40 °C (104 °F) (Elevation: below 1,400 m (4,593'); [High land]: [Off])
5 °C (41 °F) to 35 °C (95 °F) (Elevation: 1,400 m (4,593')–2,700 m (8,858'); [High land]: [On 1])
5 °C (41 °F) to 30 °C (86 °F) (Elevation: 2,700 m (8,858')–3,000 m (9,843'); [High land]: [On 2])
Operating environment humidity: 20–80 % (no condensation)
• Wireless remote control unit × 1 • Power cord × 1 (× 2 for A model only) • Instruction manual (Basic guide) • Batteries for remote control (R03/LR03/AAA type (× 2)) • Computer cable (1.5 m) × 1
• Interactive Light pen (× 2)
• CD-ROM (× 1) ··· Instruction manual, Multi Projector Monitoring & Control Software
• Batteries for pen (R03/LR03/AAA type (× 4))
• USB cable (4.5 m)
• CD-ROM (× 1) ···
Instruction manual, Multi Projector Monitoring &
Control Software, LightPen3 Software,
SP6 Driver (for Mac OS)
Projector Mount Bracket: ET-PKL430B, Ceiling Mount Bracket (for high ceilings): ET-PKL100H, Ceiling Mount Bracket (for low ceilings): ET-PKL100S
ET-LAL500
ET-RFL300
ET-PEN100
—
—
ET-PNT100
D-SUB/S-Video conversion cable: ET-ADSV
ET-WML100 (U,E)
Display method
Drive method
Panel size
Pixels
Lens
Screen size
Resolution
Brightness* (Lamp power: Normal)
Lamp
Lamp replacement cycle*2
Center-to-corner uniformity*
Contrast*
Scanning
HDMI IN
frequency
RGB
YPBPR (YCBCR)
Installation
Terminals
Video/S-Video
Vertical
Horizontal
HDMI IN
COMPUTER 1 IN
COMPUTER 2 IN
MONITOR OUT
VIDEO IN
AUDIO IN 1
AUDIO IN 2
AUDIO OUT
LAN
SERIAL IN
USB-Type A
USB-Type B
Mini USB
Built-in speaker
Operation noise*
Cabinet materials
Dimensions (W × H × D)
Weight
Operating environment
Supplied accessories
Optional
accessories
Ceiling Mount Bracket
Replacement Lamp Unit
Replacement Filter Unit
Interactive Light pen
Interactive Pointer
Conversion Cable
Wireless Module
PT-TX402
PT-TX312
Dimensions
Optional accessories
Ceiling Mount Bracket
for high ceilings*4
Ceiling Mount Bracket
for low ceilings*4
ET-PKL100H
ET-PKL100S
Projector Mount Bracket
Replacement Filter
ET-PKL430B
ET-RFL300
* The filter cover shown in the photo
is not included.
5
Replacement Lamp Unit
Interactive Light pen*
Interactive Pointer
Wireless Module
ET-LAL500
ET-PEN100
ET-PNT100
ET-WML100 (U,E)
*Exclusively for
PT-TW343R
*Exclusively for
PT-TW343R
Photo shows the ET-WML100E.
unit: mm (inches)
134.1 (5-9/32)
Keystone
correction range
PT-TW342
335 (13-3/16)
329 (12-15/16)
* Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*1 When the Standby mode is set to Eco, network functions such as power on over the LAN network will not operate. Also, only
certain commands can be received for external control using the serial terminal. *2 The value for the recommended lamp
replacement cycle is the maximum value, at which luminance will become 50 %. The usage environment affects the lamp
replacement cycle. *3 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only. *4 This product is used together with an
optional bracket attachment (sold separately). *5 The Interactive Pen is the same as those which are supplied with PT-TW343R.
Caution
Do not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fire, malfunction or electric shock.
NOTES ON USE
1. The projector uses a high-voltage mercury lamp under high internal pressure. This lamp may break, emitting a popping
sound, or fail to illuminate, due to impact or extended use.
2. The lamp becomes very hot during operation. Please observe the following precautions:
• Never place objects on top of the projector while it is in operation.
• Make sure there is an unobstructed space of 1000 mm(3 ft 3 in) or more around the projector’s exhaust openings.
• If stacking projector units, care must be taken to provide the recommended space between units. These space
requirements also apply to installation where only one projector unit is operating at one time and the other unit is used
as a backup.
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Product availability differs depending on region and country. This product may be subject to export control regulations.
The projection distances and throw ratios given in this brochure are for use only as guidelines. For more detailed
information, please consult the dealer from whom you are purchasing the product. The PJLink trademark is an
application trademark in Japan, the United States, and other countries and regions or registered trademarks.
Windows® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other
countries. HDMI, the HDMI logo and High-Definition Multimedia Interface is a trademark or registered trademark of
HDMI Licensing LLC. All other trademarks are the property of their respective trademark owners. Projection images
simulated.
© 2015 Panasonic Corporation. All rights reserved.
• If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must match the
operating temperature listed in the specifications table during use. Also, make sure the projector’s intake and exhaust
openings are not blocked. Ensure there is sufficient ventilation to prevent hot air from the exhaust openings being
recirculated into the intake opening.
3. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
• The lamp replacement cycle varies greatly depending on individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.
4. Due to natural characteristics of lamps, screen brightness may fluctuate. This is not an indication of faulty lamp performance.
For more information about Panasonic projectors, please visit:
Projector Global Web Site – panasonic.net/avc/projector
Facebook – www.facebook.com/panasonicprojector
YouTube – www.youtube.com/user/PanasonicProjector
For more information about
Panasonic Projectors and Professional Displays, pleaes visit:
Panasonic Visual System Solutions web site –
http://panasonic.net/avc/visual_system/
All information included here is valid as of August 2015.
PT-TW343RG1 Printed in Japan.
PT-TW343R Series
Short Throw LCD Projectors
PT- TW343R
PT- TW342
PT- TX402
PT- TX312
Short-Throw Convenience Meets
Wireless Projection Capability
Short-Throw, Wireless* Projection
Makes Your Space
for Presentations Comfortable
Ease of Installation
With its compact, lightweight body, the PT-TW343R Series enables
large-screen projection even in limited spaces.** Ideal for
small meeting rooms and school classrooms. An optional wireless
projection* capability also offers hassle-free presentations
without the need to connect PCs using cables.
And interactive functions*** make lectures more effective,
while giving presentations greater impact.
Corner Keystone Correction Enables Angled Projection
Quiet 28 dB*8 Design Helps to Hold Viewers’ Attention
All you need to do is designate four points as the corners of the
projected image, and this function easily carries out horizontal and
vertical keystone correction.
The noise level is as low as 28 dB.*8 This helps your audience to keep
their attention on the discussion or on the screen images during quiet
scenes.
Curved Screen Correction
Easy Lamp and Filter Replacement
Barrel and pincushion distortion is easily corrected when projecting
onto a curved screen.
For easier maintenance, you can replace the lamp from the top and
the air filter from the side, even after the projector is installed on the
ceiling. This eliminates the need to detach the projector from its
mounting bracket in ceiling-mounted applications.
Multiple Unit Monitoring Capability
Multi Projector Monitoring and Control Software is available for monitoring
and controlling multiple Panasonic projectors from a single PC.
Multiple Useful Features
* The optional ET-WML100 Wireless Module is required.
** PT-TX402/TX312: 80-inch projection from a 75-cm distance; PT-TW343R/TW342: 80-inch projection from a 80-cm distance.
*** Featured on the PT-TW343R only.
Easy Wireless Projection by Optional Module
Equipped with an HDMI Input Terminal and Abundant Interfaces
Simply inserting the optional ET-WML100 Wireless Module
into the USB port on the projector enables easy wireless
projection from Windows PCs, iOS devices, or Android devices on
which the proper freeware is installed.
Supports a wide range of system architectures. include an HDMI
input terminal, two sets of computer input terminals, a monitor
output terminals.
Presenter Light Ver.1.0 for Windows® PCs
4-Window Multi Style
• Pictures, videos, and any documents including PDF
files/Power Point files, whatever are displayed on the
PC screen can be projected.
• The images from up to four PCs can be projected
simultaneously.
VueMagic™ Pro*9 for iOS/Android Devices
• Pictures, some documents including PDF files can be projected.
• Live camera mode / Annotate mode can be used.
• The images from up to four devices can be projected simultaneously.
Memory Viewer Function
Just insert a USB memory device into the projector and start
projection straight away. There is no need for a PC.
Meeting Rooms
USB Display Function for Easy Projection Using a USB Cable
PT-TW343R
PT-TW342/TX402/TX312
Other Useful Features
•
•
•
•
Built-in closed caption decoder • Start up logo
PJLink™ compatibility
• Built-in 10 W speaker
Projector identification system for up to 6 projectors
Blackboard mode • Equipped with a security bar for theft prevention
Ecofriendly
USB Display outputs images and sounds from the computer by
connecting to the USB port with a single USB cable.
• Ecology-conscious design
• No halogenated flame retardants are used in the cabinet.
• Lead-free glass is used for the lens.
• Coating-free cabinet for easy recycling.
• Switchable lamp mode
Projection distance
Classrooms
Let's answer the planet name of A-D
Spectacular Performance
Interactive Functions Let You Write on a Projected Image (PT-TW343R Only)
You can write or draw figures on the projected image with the Interactive
Pen/Pointer.*1 In addition, two users can write simultaneously, to make classes and
presentations more effective. It is also easy to store the words and figures in a computer
for information sharing.
USB cable
(4:3 aspect ratio; throw ratio 0.46:1)
Diagonal Projection
Height from the edge of
image size distance (L) screen to center of lens (H)
Diagonal Projection
Height from the edge of
image size distance (L) screen to center of lens (H)
50˝ [1.27]
1.57 [0.48]
0.36 [0.11]
50˝ [1.27] 1.51 [0.46]
0.13 [0.04]
60˝ [1.52]
1.94 [0.59]
0.43 [0.13]
60˝ [1.52] 1.80 [0.55]
0.15 [0.05]
70˝ [1.78]
2.26 [0.69]
0.49 [0.15]
70˝ [1.78] 2.13 [0.65]
0.18 [0.05]
80˝ [2.03]
2.62 [0.80]
0.56 [0.17]
80˝ [2.03] 2.46 [0.75]
0.20 [0.06]
90˝ [2.29]
2.95 [0.90]
0.62 [0.19]
90˝ [2.29] 2.79 [0.85]
0.23 [0.07]
100˝ [2.54]
3.28 [1.00]
0.72 [0.22]
100˝ [2.54] 3.08 [0.94]
0.25 [0.08]
H
Upper edge of projected image
L
Screen
• Dual pen
Selecting the dual pen mode (Half Screen
n mode/Full Screen mode) allows two u
users
to write simultaneously, making your classes and
more efficient.
d presentations
t ti
ffi i t
Half Screen mode
Full Screen mode
support*3
Auto calibration helps to reduce setting time. Manual calibration is also available
by touching four points with the Interactive Pen/Pointer.*1
The drawing screen is divided
into two sections. Individually
select the color and line width
for each screen.
• Functionality improved
Two Interactive Pens provided
The faster frame rate ensures smooth, comfortable writing.
(16:10 aspect ratio; throw ratio 0.46:1)
Computer cable
• Auto driver installation
• Auto calibration
PT-TX402/TX312
Let's answer the planet name of A-D
Convenient Interactive Features by LightPen3 Software
No need to install a special driver from a CD-ROM.*2
unit: feet [meters]
PT-TW343R/TW342
H
L
Lower edge of projected image
Write on the full screen.
The color and line width of
the two pens are the
same.
®
*1 Interactive pointer available as an option. *2 Available for Windows only. For a Mac OS, driver
installation from the CD-ROM is necessary. *3 Available for Windows® operating system. *4 Supported
by Windows®7, Windows®8. Please note that some functions that can be used on professional displays
cannot be used on projectors. *5 Projection distance of 80 cm for the PT-TW343R/ TW342. *6 For the
PT-TX402 only. 3,300 lm for the PT-TW343R and PT-TW342, and 3,200 lm for the PT-TX312. *7 The
usage environment affects. *8 When lamp mode is set to Eco 2. *9 VueMagic™ Pro is a product of
Pixelworks, Inc. For detailed information, refer to the following website. http://vuemagic.pixelworks.com
Lightly touch the screen with the pen to write.
WhiteBoard Software*4 Extends Your Capabilities
In addition to LightPen3 Software, you can use Panasonic's dedicated WhiteBoard Software for Windows.*4 WhiteBoard Software*4 is compatible with Panasonic's
interactive-ready projectors and professional displays, and lets you use the interactive function.
75 cm
Wide 80-inch Screen Images with
a Short Projection Distance of 75 cm*5
Close range projection reduces not only
the shadows of the presenter but also the
glare of the projection light, making
lectures and meetings more comfortable.
PT-T X402/
T X312
80’’
screen
PT-TW343R/TW342:
projection distance of 80 cm
High brightness up to 3,800 lm of Brightness*6 and 12,000:1
Contrast Ratio
A remarkable 3,800 lm*6 of brightness and 12,000:1 contrast have
been achieved in a compact, easy-to-carry body. Bright, clear
images enhance the variety of viewing situations and applications.
PT-TW343R
PT-TW342
Replacement Cycle of Lamp and Air Filter Became Longer
Lamp Mode
Replacement Cycle of Lamp*
7
7
Replacement Cycle of Air Filter*
Eco 2
10,000 hours
10,000 hours
Eco 1
6,000 hours
6,000 hours
Normal
5,000 hours
5,000 hours
Daylight View Lite
The Daylight View Lite function
can be activated from the
remote control for easy and
comfortable viewing during
presentations and lectures in a
bright room.
Without Daylight View Lite
With Daylight View Lite
WXGA 3,300
,
lm
WXGA 3,300 lm
PT- TX402
TX
X
PT- TX
TX312
X
XGA
XGA
3,800 lm
3,200 lm
Note: A built-in camera
a is featured on the PT-TW343R only.
Built-in camera
Photo shows the PT-TW343R.
Photo shows the PT-TW342.
The PT-TW342/TX402/TX312
does not have a built-in camera.
Specifications
Model
PT-TW343R
Power supply
Power consumption
LCD panel
AC100–240 V 50 Hz/60 Hz
300 W (6 W with Standby mode set to Normal, 0.5 W with Standby mode set to Eco*1)
Transparent LCD panel (× 3, R/G/B)
Active matrix method
15.0 mm (0.59 inches) diagonal (16:10 aspect ratio)
16.0 mm (0.63 inches) diagonal (4:3 aspect ratio)
786,432 (1,024 × 768)
1,024,000 (1,280 × 800)
Fixed zoom, Manual focus lens, F = 1.8, f = 6.08 mm, Throw Ratio: 0.46:1
1.27–2.54 m (50–100 inches) diagonally, 16:10 aspect ratio
1.27–2.54 m (50–100 inches) diagonally, 4:3 aspect ratio
1,280 × 800 pixels (Input signals that exceed this resolution will be converted to 1,280 × 800 pixels.)
1,024 × 768 pixels (Input signals that exceed this resolution will be converted to 1,024 × 768 pixels.)
3,300 lm
3,800 lm
3,200 lm
230 W × 1 lamp
Normal: 5000 h/Eco1: 6000 h/Eco2: 10,000 h
80 %
12,000:1 (all white/all black, Iris: On) (Image mode: Dynamic, Lamp control: Normal)
525i(480i)*3, 625i(576i)*3, 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i,1125(1080)/50i, 1125(1080)/60p, 1125(1080)/50p, 1125(1080)/24p, 1125(1080)/25p, 1125(1080)/24sF,
1125(1080)/30p, VGA size (640 dots × 480 dots)–WUXGA (1,920 dots × 1,200 dots), dot clock: 25-162 MHz
fH : 15–91 kHz, fV: 24–85 Hz, dot clock: 162 MHz or lower
fH: 15.73 kHz, fV: 59.94 Hz [525i (480i)],
fH: 15.63 kHz, fV: 50 Hz [625i (576i)],
fH: 31.47 kHz, fV: 59.94 Hz [525p (480p)],
fH: 31.25 kHz, fV: 50 Hz [625p (576p)],
fH: 45.00 kHz, fV: 60 Hz [750 (720)/60p],
fH: 37.50 kHz, fV: 50 Hz [750 (720)/50p],
fH: 33.75 kHz, fV: 60 Hz [1125 (1080)/60i],
fH: 28.13 kHz, fV: 50 Hz [1125 (1080)/50i],
fH: 28.13 kHz, fV: 25 Hz [1125 (1080)/25p], fH: 27.00 kHz, fV: 24 Hz [1125 (1080)/24p], fH: 27.00 kHz, fV: 48 Hz [1125 (1080)/24sF], fH: 33.75 kHz, fV: 30 Hz [1125 (1080)/30p],
fH: 67.50 kHz, fV: 60 Hz [1125 (1080)/60p], fH: 56.25 kHz, fV: 50 Hz [1125 (1080)/50p]
fH : 15.73 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH : 15.63 kHz, fV: 50 Hz [PAL/SECAM/PAL-N]
±15° (Auto, Manual)
±15° (Manual)
Ceiling/floor, front/rear
HDMI 19-pin × 1 HDCP compatible, Deep Color compatible, Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
D-sub HD 15-pin (female) × 1 [RGB/S-Video/Y·PB(CB)·PR(CR)]
D-sub HD 15-pin (female) × 1 [RGB]
D-sub HD 15-pin (female) × 1 [RGB/Monitor output]
Pin jack × 1
M3 (L,R) × 1
Pin jack × 2 (L,R)
M3 (L,R) × 1 (variable)
RJ-45 (× 1), for network connections, 10Base-T/100Base-TX, PJLink™ (class 1) compatible
D-Sub 9-pin (female) × 1, for external control (RS-232C compatible)
1 (Memory Viewer/Wireless Module, DC 5 V, max. 500 mA)
1 (USB Display)
1 (for Interactive function)
—
10 W (monaural)
Normal: 37 dB, Eco1: 33 dB, Eco2: 28 dB
Molded plastic (PC)
335 mm × 134.1 mm (with legs at shortest position) × 329 mm
Approx. 3.9 kg
Operating environment temperature: Normal use: 5 °C (41 °F) to 40 °C (104 °F) (Elevation: below 1,400 m (4,593'); [High land]: [Off])
5 °C (41 °F) to 35 °C (95 °F) (Elevation: 1,400 m (4,593')–2,700 m (8,858'); [High land]: [On 1])
5 °C (41 °F) to 30 °C (86 °F) (Elevation: 2,700 m (8,858')–3,000 m (9,843'); [High land]: [On 2])
Operating environment humidity: 20–80 % (no condensation)
• Wireless remote control unit × 1 • Power cord × 1 (× 2 for A model only) • Instruction manual (Basic guide) • Batteries for remote control (R03/LR03/AAA type (× 2)) • Computer cable (1.5 m) × 1
• Interactive Light pen (× 2)
• CD-ROM (× 1) ··· Instruction manual, Multi Projector Monitoring & Control Software
• Batteries for pen (R03/LR03/AAA type (× 4))
• USB cable (4.5 m)
• CD-ROM (× 1) ···
Instruction manual, Multi Projector Monitoring &
Control Software, LightPen3 Software,
SP6 Driver (for Mac OS)
Projector Mount Bracket: ET-PKL430B, Ceiling Mount Bracket (for high ceilings): ET-PKL100H, Ceiling Mount Bracket (for low ceilings): ET-PKL100S
ET-LAL500
ET-RFL300
ET-PEN100
—
—
ET-PNT100
D-SUB/S-Video conversion cable: ET-ADSV
ET-WML100 (U,E)
Display method
Drive method
Panel size
Pixels
Lens
Screen size
Resolution
Brightness* (Lamp power: Normal)
Lamp
Lamp replacement cycle*2
Center-to-corner uniformity*
Contrast*
Scanning
HDMI IN
frequency
RGB
YPBPR (YCBCR)
Installation
Terminals
Video/S-Video
Vertical
Horizontal
HDMI IN
COMPUTER 1 IN
COMPUTER 2 IN
MONITOR OUT
VIDEO IN
AUDIO IN 1
AUDIO IN 2
AUDIO OUT
LAN
SERIAL IN
USB-Type A
USB-Type B
Mini USB
Built-in speaker
Operation noise*
Cabinet materials
Dimensions (W × H × D)
Weight
Operating environment
Supplied accessories
Optional
accessories
Ceiling Mount Bracket
Replacement Lamp Unit
Replacement Filter Unit
Interactive Light pen
Interactive Pointer
Conversion Cable
Wireless Module
PT-TX402
PT-TX312
Dimensions
Optional accessories
Ceiling Mount Bracket
for high ceilings*4
Ceiling Mount Bracket
for low ceilings*4
ET-PKL100H
ET-PKL100S
Projector Mount Bracket
Replacement Filter
ET-PKL430B
ET-RFL300
* The filter cover shown in the photo
is not included.
5
Replacement Lamp Unit
Interactive Light pen*
Interactive Pointer
Wireless Module
ET-LAL500
ET-PEN100
ET-PNT100
ET-WML100 (U,E)
*Exclusively for
PT-TW343R
*Exclusively for
PT-TW343R
Photo shows the ET-WML100E.
unit: mm (inches)
134.1 (5-9/32)
Keystone
correction range
PT-TW342
335 (13-3/16)
329 (12-15/16)
* Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*1 When the Standby mode is set to Eco, network functions such as power on over the LAN network will not operate. Also, only
certain commands can be received for external control using the serial terminal. *2 The value for the recommended lamp
replacement cycle is the maximum value, at which luminance will become 50 %. The usage environment affects the lamp
replacement cycle. *3 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only. *4 This product is used together with an
optional bracket attachment (sold separately). *5 The Interactive Pen is the same as those which are supplied with PT-TW343R.
Caution
Do not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fire, malfunction or electric shock.
NOTES ON USE
1. The projector uses a high-voltage mercury lamp under high internal pressure. This lamp may break, emitting a popping
sound, or fail to illuminate, due to impact or extended use.
2. The lamp becomes very hot during operation. Please observe the following precautions:
• Never place objects on top of the projector while it is in operation.
• Make sure there is an unobstructed space of 1000 mm(3 ft 3 in) or more around the projector’s exhaust openings.
• If stacking projector units, care must be taken to provide the recommended space between units. These space
requirements also apply to installation where only one projector unit is operating at one time and the other unit is used
as a backup.
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Product availability differs depending on region and country. This product may be subject to export control regulations.
The projection distances and throw ratios given in this brochure are for use only as guidelines. For more detailed
information, please consult the dealer from whom you are purchasing the product. The PJLink trademark is an
application trademark in Japan, the United States, and other countries and regions or registered trademarks.
Windows® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other
countries. HDMI, the HDMI logo and High-Definition Multimedia Interface is a trademark or registered trademark of
HDMI Licensing LLC. All other trademarks are the property of their respective trademark owners. Projection images
simulated.
© 2015 Panasonic Corporation. All rights reserved.
• If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must match the
operating temperature listed in the specifications table during use. Also, make sure the projector’s intake and exhaust
openings are not blocked. Ensure there is sufficient ventilation to prevent hot air from the exhaust openings being
recirculated into the intake opening.
3. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
• The lamp replacement cycle varies greatly depending on individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.
4. Due to natural characteristics of lamps, screen brightness may fluctuate. This is not an indication of faulty lamp performance.
For more information about Panasonic projectors, please visit:
Projector Global Web Site – panasonic.net/avc/projector
Facebook – www.facebook.com/panasonicprojector
YouTube – www.youtube.com/user/PanasonicProjector
For more information about
Panasonic Projectors and Professional Displays, pleaes visit:
Panasonic Visual System Solutions web site –
http://panasonic.net/avc/visual_system/
All information included here is valid as of August 2015.
PT-TW343RG1 Printed in Japan.
PT-TW343R Series
Short Throw LCD Projectors
PT- TW343R
PT- TW342
PT- TX402
PT- TX312
Short-Throw Convenience Meets
Wireless Projection Capability
Download PDF