Product Data Sheet
POE201-EX
PoE and Ethernet Data Extender
Overview
The IFS Power over Ethernet Extender is a quick and easy
solution that can be used when a Powered Device (PD) needs
to be installed beyond the 100 meter (328 ft.) distance limitation
of Ethernet. The module can be powered from any network
switch with PoE or from an IFS MS-PoE Mid-Span Power
Injector.\This module provides the ability to extend Ethernet
data and PoE power on a single network cable for remote
deployment of an Ethernet powered device (PD) i.e. IP camera,
access control panel, VoIP or wireless access point (WAP).\The
IFS POE201-EX is powered via the PoE power provided by a
PoE switch or injector and thus does not require an external
power adapter. Each extender requires just two watts of PoE
power providing the remaining power to the next extender or PD
device.\Up to three POE201-EX extenders can be daisychained at 328 ft. (100m) intervals, based on the EIA-568
standard, to extend Ethernet data and PoE power up to 984 ft.
(300m). Maximum distance (or hops) is dependent upon the
remaining PoE power available to meet the PD power
requirements.\The POE201-EX facilitates easier network
planning by eliminating restrictions of edge device placement
near AC power outlets and reducing the need for AC wiring and
installation costs while delivering higher reliability. This results in
a cost-effective remote power and data distribution cable
management solution for a PoE-centric IP network.
Standard Features
E
E
E
E
E
E
E
Plug-and-play PoE self-powered design
Can be used with an IFS PoE Injector or other IEEE 802.3af
compliant PSE equipment
Supports 10/100Base-TX Ethernet
Auto-detect of PoE IEEE 802.3af equipment providing
protection from incorrect installation
Current overload detection
LED Indicators for PoE In, PoE Out, Data
Can be daisy-chained to extend data and PoE on a single
network cable a maximum of 984 ft. (300m).
POE201-EX
PoE and Ethernet Data Extender
Specifications
Ethernet
Data Rate
Throughput (packet per
second)
IEEE Standards
Latency
Maximum Frame Size
EIA/TIA-568 Standards
Power Over Ethernet (PoE)
Ordering Information
Part No.
10/100Mbps
148810pps@64Bytes
IEEE 802.3 Ethernet / IEEE 802.3u Fast
Ethernet / IEEE 802.3x Flow Control
7.840¿s
1552 Bytes
Category 5/5e cable
PoE Power Supply Type
IEEE 802.3af Power over Ethernet PSE / MidSpan / IEEE 802.2af Power over Ethernet PD /
Mid-Span
Mid-Span / Type B (No external power adapter
required)
PoE Output Pin
Assignment
4/5(+), 7/8(-)
PoE Output Powerwith
Multiple Extenders
Class 1 (3.8 watts) 300m / Class 2 (6.5 watts)
300m / Class 3 (12.9 watts) 200m / Non-PoE
(Data Only) 300m
PoE Standard
Connectors & Indicators
Ethernet + PoE In
Ethernet + PoE Out
LED Indicator
Electrical & Mechanical
Input Power
PoE Output Power
Maximum Powered
Devices
Enclosure
Dimensions (W x D x H)
Weight
Power consumption
Environmental
MTBF
Operating Temperature
Storage Temperature
Relative Humidity
Standards Compliance
Regulatory
EMI
EMS
1 x RJ-45 connector (10/100Base-TX & 802.3af
PD Mid-Span)
1 x RJ-45 connector (10/100Base TX & 802.3af
PSE Mid-Span)
1 PoE In, 1 PoE Out , 1 Data LNK/ACT
Powered by 48VDC from PoE Switch or MidSpan Injector @ IEEE 802.3af
48VDC @ 270mA, 13 watts
1
Metal
3.7 x 2.75 x 1 in. (94 x 70 x 26mm)
0.47 lbs/215g
2 watts from PoE uplink
>50,000 hrs. @ 25¿C
0¿ ~ 50¿C
-20¿ ~ 70¿C
5% ~ 90% (non-condensing)
FCC Part 15 Class A, CE
EN 55022 CLASS A / EN61000-3-2 /
EN61000-3-3
EN 55024 / IEC 61000-4-2 / IEC 61000-4-3 / IEC
61000-4-4 / IEC 61000-4-5 / IEC 61000-4-6 / IEC
61000-4-8 / IEC 61000-4-11 / IEC/EN 60950-1
As a company of innovation, UTC Fire & Security reserves the right to change product
specifications without notice. For the latest product specifications, visit UTC Fire & Security
online or contact your sales representative.
POE201-EX-2017-07-25 18:08:21 Released :11-JUL-17
POE201-EX
Description
PoE and Ethernet Data Extender
Download PDF