The AES-302 - Digital Audio Switcher
The AES-302 - Digital Audio Switcher
The Switcher ...
The AES-302 is a two input switcher which can operate automatically. When placed in the automatic mode, the unit
monitors the incoming audio stream and can switch to an alternate path on user selectable error flags, loss of clock or
user defined silence. The unit can be commanded remotely or locally to switch as well.
The Distribution System ...
Up to four outputs are available Order any input or output configuration that meets your needs. The AES-302 can
support AES, SPDIF and Optical interfaces.
The Diagnostic Monitor ...
The unit features complete error flag information with memory retained to aid in troubleshooting. Slipped sample,
CRC error, parity error, coding error and unlock status are available. There is a sample rate indicator included too.
The D/A Converter ...
The AES-302 features a 96 KHz 24 bit converter with balanced output for professional analog applications. There is
also a front panel headphone output for confidence monitoring.
Standards Conversion ...
The unit can be ordered with AES-XLR , BNC, SPDIF or optical I/O in virtually any combination desired. There is
complete flexibility negating the need for outboard standards converters.
The AES-302 can be used as a transmitter or studio audio switcher, digital to analog converter, or diagnostic
monitor. It is well suited to broadcast and recording applications. It features a rugged steel chassis for excellent
shielding. All automatic switching functions are user programmable. Select the errors that you want to switch upon.
Easy to understand front panel controls and indicators for quick installation and ease of use. Remote control functions are simple momentary ground closures for interface to most modern remote control systems. Remote status
indications are via dry relay contacts. Call your local broadcast distributor for pricing, call or email us with any
questions that you might have. The AES-302 is the next generation of digital control.
Broadcast Devices, Inc.
5 Crestview Avenue, Cortlandt Manor, NY 10567 Tel. (914) 737-5032 Fax (914) 736-6916
email: [email protected] Website:
Rear View - XLR Configuration
Snapshot of Features:
Two Input Digital Switcher
Four Digital Outputs
Balanced Left/Right Analog Output
Power Fail Passive Bypass - Selected Input is hard bypassed to AES OUT #1 Upon Power Failure
Front Panel Digital Status
Headphone Confidence Monitor Output
Remote Control of Channel Selection
Status of Channel Position
Optional SPDIF and/or optical digital I/O - Contact the factory to discuss your requirements
Global Power Supply - works virtually anywhere in the world
Technical Specifications
Number of Inputs:
Number of Outputs:
Sample Rates Supported:
Digital Resolution:
Front Panel Switches:
Front Panel Monitoring:
Power Remote Control/Status:
Headphone Monitor:
Physical Dimensions:
Power Requirements:
Authorized Distributor:
2 - Switchable Conforming to the AES3 Standard
4 - Digital, 1 - Analog Left/Right Balanced Output
8 - 96 KHz
Up to 24 bits
7 - Channel Selection, Auto/Manual Selection,
Error Reset, Volume Up/Dn
LED Indication of Sample Rate, Error Status,
Open Collector control of channel selection
Dry contact status NO/NC/C
via 9 Pin D connector
1/4” Phone Jack on Front Panel with Digital
Volume Control
19”W X 1.75”H X 10” D
120/240 VAC 50 -60 Hz
0 - 60 Degrees C. Non Condensing Atmosphere
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF