Leica iCON gps 80 Equipment List

Leica iCON gps 80
Equipment List
Table of Contents
iCON gps 80 Machine Control GNSS receiver
3
1
iCON gps 80 Machine Control GNSS receiver
3
2
Additional iCON gps 80 Receiver Options
4
3
Slot in Radios
5
4
External RTK Antennas for Machine use
5
5
GNSS Antennas and Cables
6
5.1
5.2
6
6
GNSS Antenna
GNSS Antenna accessories
6
Containers for iCON gps 80 Receiver
7
Additional Accessories for iCON gps 80 Machine Setups
6
8
Data Storage and Data Transfer
7
8.1
8.2
8.3
7
7
7
9
Memory Devices
Data Transfer Cables
Ethernet Cables
6
Power Supply
7
9.1
9.2
7
7
External Power Supply
Battery Chargers
Care Packages
8
10
8
Customer Care Packages
Trademarks
9
11
9
Trademarks
Suggested Configurations
12
Single GNSS Machine Configuration
10
10
13
Dual GNSS Machine Ready Configuration
10
14
Dual GNSS Machine Configuration
10
15
Upgrade Kit Redline to iCG80 Single GNSS Machine
10
16
Upgrade Kit Redline to iCG80 Dual GNSS Machine
11
17
iCON gps 80 System Integration Configuration
11
2
iCON gps 80 Machine Control GNSS receiver
1 iCON gps 80 Machine Control GNSS receiver
Leica iCON gps 80 Dual GNSS Value (Heading ready)
805 259
iCG82
Leica iCON gps 80 Dual GNSS Standard (Heading ready)
805 260
iCG82
Leica iCON gps 80 Dual GNSS Ultimate (Heading ready)
829 250
iCG82
Leica iCON gps 80 Dual GNSS Value Heading
805 261
iCG82
Leica iCON gps 80 Dual GNSS Standard Heading
805 262
iCG82
Leica iCON gps 80 Dual GNSS Ultimate Heading
Supported GNSS Systems
GPS L2
GLONASS
GLPS L5
Galileo
BeiDou
RTK Performance
Low Accuracy RTK (2/50)
Low Accuracy RTK (20/2)
High Accuracy RTK
RTK up to 2.5km
RTK unlimited
Network RTK
SmartLink (L-band)
Position Update &
Data Recording
2 Hz positioning
20 Hz positioning
Raw Data RINEX logging
Additional features
RTK Reference Station
functionality
NMEA out
Low Accuracy Heading (±20°)
Dual Positioning and
Precise Heading
Open Interface License
iCON Telematics
Dual GNSS Ultimate
Heading (805 262)
iCG82
Dual GNSS Standard
Heading (805 261)
Leica iCON gps 80 Dual GNSS Entry
829 249
Dual GNSS Value
Heading (829 250)
iCG82
Dual GNSS Ultimate
(Heading ready) (805 260)
Leica iCON gps 80 Single GNSS Ultimate
805 258
Dual GNSS Standard
(Heading ready) (805 259)
iCG81
Dual GNSS Value
(Heading ready) (829 249)
Leica iCON gps 80 Single GNSS Standard
805 253
Dual GNSS Entry
(805 258)
iCG81
Single GNSS Ultimate
(805 253)
Leica iCON gps 80 Single GNSS Value
805 252
Single GNSS Standard
(805 252)
Leica iCON gps 80 Single GNSS Entry
iCG81
Single GNSS Value
(829 248)
iCG81
829 248
Single GNSS Entry
(805 249)
805 249





●
●



●
●



●
●
●
●
●





●
●



●
●



●
●
●
●
●
●
●



●
●



●
●
●
●
●








●

●
●
●



●
●
●
●



●
●
●
●
●








●

●
●
●



●
●
●
●



●
●
●
●
●


●
●
●
●



●
●
●
●



●
●
●
●
●



●
●

●
●

●
●
●



●
●

●
●

●
●
●
●
●

●
●

●
●
●



●



●


●

-

-

-
●
-









●



●



●
●

●






















● Standard
 Optional
- Not available / hardware upgrade required
3
2 Additional iCON gps 80 Receiver Options
iCON gps 80 hardware upgrade
817 995
CUP1
Upgrade from iCG81 to iCG82
iCON gps 80 software upgrades
817 433
CSW587
Upgrade Entry to Base Station for iCG81
829 259
CSW904
Upgrade Entry to Value for iCG81/82
805 308
CSW579
Upgrade Entry to Standard for iCG81/82
817 434
CSW584
Upgrade Entry to Ultimate for iCG81/82
829 260
CSW905
Upgrade Entry to Value heading for iCG82
817 437
CSW585
Upgrade Entry to Standard Heading for iCG82
817 435
CSW586
Upgrade Entry to Ultimate Heading for iCG82
805 307
CSW578
Upgrade Base Station to Ultimate for iCG81
829 262
CSW907
Upgrade Value Heading to Standard Heading for iCG82
829 261
CSW906
Upgrade Value to Standard for iCG81/82
805 309
CSW580
Upgrade Standard to Ultimate for iCG81/82
iCON gps 80 individual software options
4
805 286
CSW560
RTK low Accuracy (H)
829 255
CSW901
RTK low Accuracy (2D)
805 287
CSW561
RTK high Accuracy (H)
805 289
CSW562
Enables Base Station
805 290
CSW563
Position update 2Hz
805 291
CSW564
Position update 20Hz
805 292
CSW565
RTK Baseline option 2.5km
805 294
CSW566
RTK unlimited Baseline
805 295
CSW567
RTK Network access
5306782
CSW904
2 years SmartLink Service
805 297
CSW568
GPS L2 Support
805 298
CSW569
GLONASS Support
805 299
CSW570
GPS L5 Support
805 300
CSW571
Galileo Support
805 301
CSW572
BeiDou Support
805 302
CSW573
Raw Data Logging
805 303
CSW574
NMEA streaming
805 304
CSW575
Open Interface
829 257
CSW902
RTK Low Accuracy Heading (±20°)
805 305
CSW576
Dual Positioning and Precise Heading
827 097
CSW596
iCG80 Telematics 1 Year License
827 098
CSW597
iCG80 Telematics 2 Year License
827 099
CSW598
iCG80 Telematics 3 Year License
827 100
CSW599
iCG80 Telematics 1 Day License
827 101
CSW900
iCG80 Telematics additional 1 Year License
805 306
CSW577
Demo License
817 430
CSW581
Upgrade to high accuracy
817 431
CSW582
Upgrade to position rate 20Hz
817 432
CSW583
Upgrade to unlimited baseline
829 258
CSW903
Upgrade from RTK Low Accuracy Heading to Dual Positioning and Precise
Heading
3 Slot in Radios

The iCG81 and iCG82 receivers are equipped with a built-in GSM/GPRS/UMTS/HSPA modem as standard.
A separate slot in radio can be added.
Satelline radio module
805 272
CCD14
Internal Satel Radio for iCON gps 80 Machine Control GNSS Receiver.
Frequency range 403-470 Mhz, TXO and RXO module. RTK transmit and receive
UHF radio module incl. Radio Cover.
Intuicom radio module
805 273
CCD15
Internal Intuicom Radio for iCON gps 80 Machine Control GNSS Receiver.
Frequency 900 Mhz, TXO and RXO radio. RTK transmit and receive ISM / SpreadSpectrum radio module incl. Radio cover.
Configuration Toolkit
6002544
Configuration tool kit for programming Satelline and Pacific Crest SLR RTK radio
modules; includes programming cable GEV231 and configuration software
CD ROM.

SLR radios will be delivered pre-configured according to country-specific
radio regulations. In countries where radios need to be configured
locally, the configuration tool kit is to be used.
4 External RTK Antennas for Machine use
External magnetic mount for radio and modem antennas
805 279
CA11
Magnetic Radio Antenna Mount for placement on machine roof.
Includes 5 m/15 ft cable with TNC male connector. Radio Antenna must be
purchased separately.
816 971
CA17
Magnetic Radio Antenna Mount with Dust Cap for placement on machine roof.
Intended for '3D ready' installations when no radio/modem antenna is mounted.
Includes 5 m/15 ft cable with TNC male connector. Radio Antenna must be
purchased separately.
External stub radio and modem antennas
805 281
CA12
Radio Antenna, Frequency range 406-440 MHz for CCD14 Satel radio.
Low profile. To be used with CA11 Magnetic Radio Mount.
805 282
CA13
Radio Antenna, Frequency range 430-480 MHz for CCD14 Satel radio.
Low profile. To be used with CA11 Magnetic Radio Mount.
805 283
CA14
Radio Antenna, Frequency range 698-960 MHz and 1710-2500 MHz for CCD15
Intuicom radio and internal HSPDA modem. Low profile. To be used with CA11
Magnetic Radio Mount.
Gainflex radio antennas
639 964
GAT1
Gainflex radio antenna (frequency range 400-435 MHz).
667 243
GAT2
Gainflex radio antenna (frequency range 435-470 MHz).
Antenna for modem
782 500
GAT18
Multiband GSM/UMTS Antenna.
743 283
GAT1203
Antenna for 900/1800 MHz mobile network.
5
5 GNSS Antennas and Cables
5.1 GNSS Antenna
805 284
CGA60
Robust GPS/GLONASS/Galileo triple frequency antenna for Machine Control
Applications. Used together with iCG80 Machine GNSS Receiver or other GNSS
receivers. With TNC connector and 5/8" threat.
5.2 GNSS Antenna accessories
Robust antenna cables
807 367
CA15
Robust antenna cable, 5m. To be used on all machines.
818 369
CA19
Robust antenna cable, 7.5m. To be used on all machines.
807 368
CA16
Robust antenna cable, 10m. To be used on all machines.
Dozer/Grader cable package
812 360
Cable package for Dozer/Grader installations.
Includes GNSS antenna coil cable, 6m, MCC GNSS bracket and GNSS antenna
cable, 40cm.
6 Containers for iCON gps 80 Receiver
805 278
CTC4
Carry Case for iCON gps 80 Machine Kit.
Includes space for iCON gps 80, two CGA60 GNSS antennas, iCP41 Machine PC,
a slope sensor and cables.
805 277
CTC3
Carry Case for iCON gps 80 Base Station Kit.
7 Additional Accessories for iCON gps 80 Machine Setups
Machine Brackets
805 275
CMB6
Quick Release Machine Bracket for iCG80 GNSS Receiver. To mount the iCG80 on
a machine with a quick release mechanism. Includes CMB7 adapter plates.
805 276
CMB7
Additional adapter plates to mount the iCON gps 80 to an existing CMB6 Quick
Release Machine Bracket.
Power and Data cables - CAN
761 062
6
Cable CAN M12 F/F, 2m
764 865
Cable CAN M12 F/F, 3.5m
761 063
Cable CAN M12 F/F, 5m
761 057
Cable CAN M12 F/F, 7.5m
761 058
Cable CAN M12 F/F, 10m
764 866
Cable JunctionBox to cradle 5P M12/open end, 5m
8 Data Storage and Data Transfer
8.1 Memory Devices
765 199
MS1
USB memory stick, 1GB, industrial grade.
8.2 Data Transfer Cables
Serial cables
733 280
GEV160
Serial data transfer cable, 2.8m, connects iCON gps 80 receiver to PC. (Lemo to
9pin RS232)
806 095
GEV269
Data transfer cable, converter cable Lemo to USB A connector, 2.0m, connects
GNSS receiver, controller, iCG60 or TM30/TS30 to PC.
766 087
Cable cradle to GNSS receiver, Lemo/open end, 7m.
8.3 Ethernet Cables
829 251
CA27
Robust Ethernet cable 1.5m, to connect iCON gps 80 receiver to a network. (M12
to RJ45)
9 Power Supply
9.1 External Power Supply
Battery for iCON gps 80
818 916
GEB371
External universal battery, Li-Ion, 13 V, 250 Wh, rechargeable.
Power cables for iCON gps 80
762 358
MSC1259
1.8m cable, connects PowerBox to Lemo1-5pin.
439 038
GEV71
4m car battery cable, connects all battery cables to 12V car battery.
733 298
GEV172
Power cable, 2.8m, connects GPS receiver to 2 external GEB171 batteries.
762 356
MSC1258
11m cable, connects GNSS receiver to machine battery.
Permanent Power Supply
807 696
GEV270
731 772
Power supply unit, TPS/GPS/DNA.
Power cable, for use in USA.
731 773
Power cable, for use in the EU.
734 232
Power cable, for use in the UK.
734 233
Power cable, for use in Australia.
738 586
Power cable, for use in Switzerland.
9.2 Battery Chargers
774 437
GEV242
Charger for GEB371 external battery.
7
Care Packages
10 Customer Care Packages
A wide selection of comprehensive Customer Care Packages (CCPs) is available
bundling Hardware Maintenance, Software Maintenance, Customer Support and
Extended Warranty.
For more information about the CCP offering in your country please contact your
local Leica Geosystems organization or distribution partner.
8
Trademarks
11 Trademarks
Any use of word marks and logos by Leica Geosystems AG is under license.
Other trademarks and trade names are those of their respective owners.
9
Suggested Configurations
12 Single GNSS Machine Configuration
805 252
iCG81
Leica iCON gps 80 Single GNSS Standard
805 272
CCD14
Internal Satel Radio for iCON gps 80 Machine Control GNSS Receiver
805 279
CA11
Magnetic Radio Antenna Mount for placement on machine roof
805 281
CA12
Radio Antenna, Frequency range 406-440 MHz for CCD14 Satel radio
805 284
CGA60
Robust GPS/GLONASS/Galileo triple frequency antenna for Machine Control
Applications
807 367
CA15
761 063
Robust antenna cable, 5m
Cable CAN M12 F/F, 5m
761 063
Cable CAN M12 F/F, 5m
805 278
CTC4
Carry Case for iCON gps 80 Machine Kit
805 275
CMB6
Quick Release Machine Bracket for iCG80 GNSS Receiver
13 Dual GNSS Machine Ready Configuration
805 259
iCG82
Leica iCON gps 80 Dual GNSS Standard (Heading ready)
805 272
CCD14
Internal Satel Radio for iCON gps 80 Machine Control GNSS Receiver
805 279
CA11
Magnetic Radio Antenna Mount for placement on machine roof
805 281
CA12
Radio Antenna, Frequency range 406-440 MHz for CCD14 Satel radio
805 284
CGA60
Robust GPS/GLONASS/Galileo triple frequency antenna for Machine Control
Applications
807 367
CA15
761 063
Robust antenna cable, 5m
Cable CAN M12 F/F, 5m
761 063
Cable CAN M12 F/F, 5m
805 278
CTC4
Carry Case for iCON gps 80 Machine Kit
805 275
CMB6
Quick Release Machine Bracket for iCG80 GNSS Receiver
14 Dual GNSS Machine Configuration
805 261
iCG82
Leica iCON gps 80 Dual GNSS Standard Heading
805 272
CCD14
Internal Satel Radio for iCON gps 80 Machine Control GNSS Receiver
805 279
CA11
Magnetic Radio Antenna Mount for placement on machine roof
805 281
CA12
Radio Antenna, Frequency range 406-440 MHz for CCD14 Satel radio
805 284
CGA60
Robust GPS/GLONASS/Galileo triple frequency antenna for Machine Control
Applications
805 284
CGA60
Robust GPS/GLONASS/Galileo triple frequency antenna for Machine Control
Applications
807 367
CA15
Robust antenna cable, 5m
818 369
CA19
761 063
Robust antenna cable, 7.5m
Cable CAN M12 F/F, 5m
761 063
Cable CAN M12 F/F, 5m
805 278
CTC4
Carry Case for iCON gps 80 Machine Kit
805 275
CMB6
Quick Release Machine Bracket for iCG80 GNSS Receiver
15 Upgrade Kit Redline to iCG80 Single GNSS Machine
805 252
iCG81
761 063
761 063
10
Leica iCON gps 80 Single GNSS Standard
Cable CAN M12 F/F, 5m
Cable CAN M12 F/F, 5m
805 278
CTC4
Carry Case for iCON gps 80 Machine Kit
805 275
CMB6
Quick Release Machine Bracket for iCG80 GNSS Receiver
16 Upgrade Kit Redline to iCG80 Dual GNSS Machine
805 261
iCG82
Leica iCON gps 80 Dual GNSS Standard Heading
805 284
CGA60
Robust GPS/GLONASS/Galileo triple frequency antenna for Machine Control
Applications
807 367
CA15
761 063
Robust antenna cable, 5m
Cable CAN M12 F/F, 5m
761 063
Cable CAN M12 F/F, 5m
805 278
CTC4
Carry Case for iCON gps 80 Machine Kit
805 275
CMB6
Quick Release Machine Bracket for iCG80 GNSS Receiver
17 iCON gps 80 System Integration Configuration
805 262
iCG82
Leica iCON gps 80 Dual GNSS Ultimate Heading
805 272
CCD14
Internal Satel Radio for iCON gps 80 Machine Control GNSS Receiver
639 964
GAT1
Gainflex radio antenna (frequency range 400-435 MHz)
743 283
GAT1203
Antenna for 900/1800 MHz mobile network
805 284
CGA60
Robust GPS/GLONASS/Galileo triple frequency antenna for Machine Control
Applications
805 284
CGA60
Robust GPS/GLONASS/Galileo triple frequency antenna for Machine Control
Applications
807 367
CA15
Robust antenna cable, 5m
807 367
CA15
761 063
Robust antenna cable, 5m
Cable CAN M12 F/F, 5m
762 358
MSC1259
1.8m cable, connects PowerBox to Lemo1-5pin
733 280
GEV160
Serial data transfer cable, 2.8m
807 696
GEV270
Power supply unit, TPS/GPS/DNA
11
Leica Geosystems intelligent CONstruction.
Whether you construct buildings, roads, bridges or tunnels, you benefit
from intelligent CONstruction. Leica iCON is more than a new product
line or software package, it enables you to enhance your performance
and increase your profitability through perfecting your construction
workflow.
Understanding construction demands outstanding solutions:
• Custom-built
• Complete
• Straightforward
• High performance
When it has to be right.
Illustrations, descriptions and technical specifications are not binding and may change.
Printed in Switzerland - Copyright Leica Geosystems AG, Heerbrugg, Switzerland, 2015.
819298 - 1.3.0en - V.15
Leica Geosystems AG
Heinrich-Wild-Strasse
CH-9435 Heerbrugg
Switzerland
Phone +41 71 727 31 31
www.leica-geosystems.com
Download PDF