Technical Data
Absolute comfort and crystal-clear communication
ComCom by Phonak is an ultra-light and highly comfortable communication headset providing excellent speech
intelligibility and clear voice transmission in all situations. ComCom is available in several models for use with a wide range
of communication devices (phones, radios, intercoms, etc.)
Due to its modular construction ComCom can be worn with custom-molded or generic ear shells, in the left or right ear.
There are no parts covering or hanging off the outer ear, meaning no pressure around the head or discomfort. ComCom
fits securely inside the ear, providing total freedom of movement, without fear of losing the headset.
ComCom
Main features :
Feather-light and long-lasting comfort
Can be used with custom-molded (eShell) or generic
ear shells
Noise-cancelling boom microphone enables clear speech
transmission, even in noisy environments
Two microphone versions available:
Standard boom (short arm). Suits active users.
Close-talk boom (long arm). Must be placed in front
of the mouth. Suits very high-noise environments.
Speaker inside noise-isolating ear shell guarantees
excellent speech comprehension
EarJack plug enables accurate perception of
surroundings (several plugs available)
Foam microphone sleeve, reduces wind noise and
protects against dirt and water
Compatible with glasses, helmets, hats and other
headgear
No battery (powered by radio/phone) means headset
is always ready to use
eShell
earJack plug
boom microphone
ComCom
General Features
Weight
ComCom: 10g
Marking
Unique user ID on eShell
Accessories
Attachment clip
Adapters for cordless or mobile phones
PTT adapters for radios
Carrying case
Standard boom microphone (short-arm)
Close-talk boom microphone (long-arm)
Technical Specifications
Standard boom microphone (short arm)
Microphone sensitivity
Microphone supply
Microphone type
-44 (±4) dB re. 1V/Pa at 1 kHz
2.0V - 6.0V
(1.3V - 4.0V with EarJack headset LIM Boom phone 2.5/3.5mm)
Electret, noise canceling
Close-talk boom microphone (long arm)
Microphone sensitivity
Microphone supply
Microphone type
-38 (+/- 4) dB re. 1V/Pa at 1kHz near field (6mm)
1.3V - 10V
Electret, noise canceling, close-talk
Common specifications
Ear speaker sensitivity
Ear speaker impedance
Maximum volume at ear speaker
Cable pull force
Operational temperature range
Electromagnetic compatibility (EMC)
94 dBA @ 150 mVRMS
50 Ω DC, 100 Ω @ 1 kHz
100 dB(SPL)
50 N
-20°C - +60°C
EN 55022, EN 55024
ComCom configurable
ComCom configurable includes 3 main parts
each available in several versions:
1. An ear shell
2. An earJack plug
3. An earJack headset
1. Ear shell
3. EarJack headset
2. EarJack plug
A list of available variants for each part
is shown below. Please specify the exact
configuration required when ordering.
1. Ear shells
Configurable items
Description
Application
Custom ear shell (eShell)
Individually molded
Green, beige or
blue color
Left or right
Highly comfortable fit
Perfect to wear for long hours
Note: the ComCom eShell is not a hearing protection mold!
Generic ear shells - Silicone
Left and right ear
shells
3 pairs of silicone
eartips (S, M, L)
2 pairs of concha
retentions (S, L)
Perfect for occasional/short term use
Generic ear shells - Foam
Same as above, with
foam eartips instead
of silicone.
Perfect for occasional/short term use
Generic ear shells - Complete
Same as above with
3 pairs of silicone
eartips and 3 pairs
of foam eartips.
Perfect for occasional/short term use
No ear shells
The configuration “no ear shells” is intended for ordering an earJack headset as spare part
for ComCom or Serenity SPC
2. EarJack plugs
Configurable items
Description
Application
Anthracite plug
Closed plug
Best understanding of the incoming communication (even in noise).
Default plug.
Red plug
Plug with 1mm hole
Allows perception of the surroundings while listening to the incoming
communication. Best suited for quiet environments.
ComCom configurable
3. EarJack headsets
Description
Application
EarJack headset LIM
boom Binder 620
Standard boom
Cable 120cm
Binder 620 connector
Communicate in noise levels
up to 90-95 dBSPL
Connect to different types of radios
through a standard 2”PTT
See separate lists of 2”PTTs and radio
compatibility
EarJack headset LIM
boom 35M1
Standard boom
Cable 120cm
Jack 3.5mm/4 poles
Communicate in noise levels
up to 90-95 dBSPL
Connect to different models of radios and
remote speaker microphones
EarJack headset LIM
boom 2.5mm
Standard boom
Cable 120cm
Jack 2.5mm/3 poles
Communicate in noise levels
up to 90-95 dBSPL
Connect to different models of radios and
remote speaker microphones
EarJack headset LIM
boom Condor
Standard boom
Cable 120cm
Fischer connector
Communicate in noise levels
up to 90-95 dBSPL
Connect to all Condor transceivers
EarJack headset LIM
boom MicMute Condor
Communicate in noise levels
up to 90-95 dBSPL
Select between microphone always active
or muted (press-to-talk)
Connect to all Condor transceivers
EarJack headset LIM
CloseTalk Binder 620
Close-talk boom
Cable 120cm
Binder 620 connector
Communicate in extremely noisy
environments (up to 100-105 dBSPL)
Connect to different types of radios through
a standard 2”PTT
See separate lists of 2”PTTs and radio
compatibility
EarJack headset LIM
boom phone 3.5mm
Standard boom
Cable 120cm
Jack 3.5mm/4 poles
Communicate in noise levels
up to 90-95 dBSPL
Connect to several models of smart phones
EarJack headset LIM
boom phone 2.5mm
Standard boom
Cable 120cm
Jack 2.5mm/3 poles
Communicate in noise levels
up to 90-95 dBSPL
Connect to different wireless phones or mobile
phones, either directly or through adapters
Separate list of adapters and phone
compatibility on demand.
Standard boom
MicMute switch
Cable 120cm
Fischer connector
Connectivity
12.2016 / RevC
Configurable items
Download PDF