SensorLink PC Turnkey Receiver Assembly

SensorLink™ PC
Turnkey Receiver Assembly Instructions
ABOUT THE SENSORLINK PC
TURNKEY RECEIVER
The Turnkey Receiver is a fully integrated SensorLink PC Receiver system. It combines sophisticated SensorLink PC Receiver
software with a PC-compatible computer and high speed modems to provide an “out of box” solution to your long distance
picture transmission requirements. The turnkey system is fully
configured and ready to operate. Simply connect the components and go to work.
UNPACK YOUR TURNKEY
RECEIVER
1.
Inspect each carton for shipping damage. If damage is evident, report it to your carrier immediately.
2.
Make sure you have received everything. Compare the contents of the cartons with the list below. If an item is missing,
recheck the packing materials. If the item cannot be found,
contact Sensormatic for assistance.
SensorLink PC
Quad-Link Package Contents
Carton #1
q One SensorLink PC Quad-Link Turnkey integrated
computer platform
q One SensorLink PC Receiver software package, including:
q One License agreement
q 3.5” Receiver software backup diskettes
q One SensorLink PC software key
q One SensorLink PC Turnkey Assembly Instructions
(this document)
q One SensorLink PC System Installation and Operation
Manual
q One SensorLink PC Quick Reference Guide
®
Sensormatic
THE WORLD LEADER IN LOSS PREVENTION
SensorLink™ PC
q One Mouse pointer
q One Enhanced keyboard
q One Four channel serial interface cable
q One Computer AC power cord
q Other manufacturer documentation
Carton #2 (Optional)
q One Color SVGA display monitor
q One Monitor AC power cord
q One Monitor video cable (if not attached to the monitor)
Carton #3 (Optional)
q Four v.34 standard modems with cables and power supplies
SensorLink PC
Single-Link Package Contents
Carton #1
q One SensorLink PC Single-Link Turnkey integrated
computer platform
q One SensorLink PC Receiver software package, including:
q One License agreement
q 3.5” Receiver software backup diskettes
q One SensorLink PC software key
q One SensorLink PC Turnkey Assembly Instructions
(this document)
q One SensorLink PC System Installation and Operation
Manual
q One SensorLink PC Quick Reference Guide
q One Mouse pointer
q One Enhanced keyboard
q One Computer AC power cord
q Other manufacturer documentation
Turnkey Receiver Assembly Instructions
Carton #2 (Optional)
q One Color SVGA display monitor
q One Monitor AC power cord
q One Monitor video cable (if not attached to the monitor)
Carton #3 (Optional)
q One v.34 standard modem with cable and power supply
q One Single channel serial interface cable
CONNECT THE DEVICES
Find a suitable location. The SensorLink PC Turnkey Receiver
requires AC power and appropriate telephone line(s). Assemble
your Receiver system as follows:
q Plug the keyboard into the computer’s keyboard port.
q Plug the mouse into the mouse port.
q Plug the monitor video cable into the computer’s video port
and secure the screws.
q Plug the software key into the computer’s parallel printer
port and secure the screws.
q (SensorLink PC Quad-Link only) Plug the large end of the
four channel serial interface cable into the computer’s mating connector and secure the screws. Plug each remaining
connector into the mating connector on each modem and
secure the screws.
q (SensorLink PC Single-Link only) Plug one end of the single
channel serial interface cable into the computer’s mating connector marked COM 1 or COM A and secure the screws.
Plug the other end into the mating connector of the modem
and secure the screws.
q Plug one end of a telephone cable into the LINE jack of each
modem jack. Plug the other end of each cable into a standard telephone jack.
SensorLink™ PC
CONNECT THE POWER
q Plug the modem power supply into the modem and connect
it to AC power.
q Check the computer voltage selection switch (if present).
Make sure it is set correctly for the voltage you are using.
q Plug the computer power cord into the computer and connect it to AC power.
q Plug the monitor power cord into the monitor and connect
it to AC power.
POWER UP YOUR TURNKEY
RECEIVER
q Press the monitor power switch and the computer power
switch. The Receiver software loads automatically.
q Adjust the brightness and contrast controls on the monitor.
TEST YOUR TURNKEY RECEIVER
q Test your Turnkey Receiver by calling one of the Sensormatic
Factory Demonstration Transmitter sites. Refer to your
SensorLink PC System Installation Instructions.
GO TO WORK...
q Refer to the rest of your SensorLink PC system documentation for information on how to use SensorLink PC.
Sensormatic Electronics Corporation
951 Yamato Road
Boca Raton, FL 33431
TEL: 561-989-7000
800-241-6678
FAX: 561-989-7017
Part Number 8000-2099-01 REV A
Download PDF