Data Sheet - Enova® DGX 3200 Enclosure

DATA SHEET
Enova® DGX 3200 Enclosure
DGX3200-ENC (FG1061-32)
Overview
The new Enova DGX 3200 Enclosure (DGX3200-ENC) is a Digital Media Switcher that
is ready to support 4K and Ultra High Definition (UHD) content. This robust solution
includes a NetLinx® NX Integrated Controller, redundant power supplies and can be
populated with Enova DGX video input and output boards in addition to optional
audio -switching boards. There are four connections per video board, and each
enclosure holds eight video input boards and eight video output boards for a
maximum matrix of 32x32.
The Enova DGX 3200 adds several new capabilities such as automatic setup of
DXLink endpoints, single IP addressing for multiple endpoints, and a new web
interface to greatly simplify installation and configuration. The new advanced
Audio Switching Boards add audio breakaway capabilities and parametric EQ on
each DGX output.
The Enova DGX 3200 is far beyond a modular media switcher with built-in controller – it functions as the
centerpiece of a complete integrated solution that manages and distributes analog and digital audio and video
including HDMI/HDCP, control and Ethernet. Easily integrate HDCP into system designs and enjoy hassle-free plugand-play operation. No tools, no delays and no key constraints – it just works with AMX's exclusive InstaGate Pro®
Technology. Built for today's and tomorrow's needs, a comprehensive set of Enova DGX boards can be used in
conjunction with DXLink and DGX Transmitters and Receivers to provide an end-to-end distribution system over
twisted pair cable or fiber. An integrated NetLinx NX Controller and embedded Ethernet switch enables
management of the entire solution including source equipment and display devices located throughout the
environment – all from a single point of control.
© 2016 AMX. All rights reserved.
In addition to eliminating HDCP delays, InstaGate Pro allows traditionally key limited sources to be switched freely
to all connected HDCP compliant displays – eliminating HDCP key limitations that plague large applications. Builtin SmartScale® Technology on every output provides video that is perfectly scaled for each connected display,
eliminating the integration challenges that can occur when sources and displays have different supported
resolutions – making it easy to specify, easy to install and easy to use. With the powerful combination of analogto-digital signal conversion, video scaling and high speed digital switching the system delivers perfect video every
time – regardless of signal type.
As part of a complete distribution system, easily send analog or digital audio and video including HDMI with HDCP
signals, plus control 10 Km over single mode fiber or 300 meters over multimode fiber; send all this plus power up
to 100 meters over standard twisted pair cable to and from the Enova DGX using the DXLink Twisted Pair and
Fiber Transmitters/Receivers.
Common Applications
 The Enova DGX is ideal for dramatically simplifying AV control and distribution in large spaces such as lecture
halls, auditoriums, hotel ballrooms, casinos, museums and stadiums/arenas.
 The Enova DGX is ideally suited for multi-room or configurable room applications, where multiple
collaboration spaces share a single DGX for control.
 Enova DGX fiber capabilities enable transport of audio, video and control up to 10 Km making it a perfect
solution for tall buildings with multiple floors, large campuses with multiple buildings or large facilities such
as a factory.
 Enova DGX fiber solutions provide secure distribution of content for applications which data security is
critical such as government, banking/finance or network operation centers.
Features
 HDMI/HDCP Switching – End-to-end distribution of HDMI/HDCP without interruption or key constraints
using InstaGate Pro® Technology
 4K and Ultra High Definition (UHD) Content Ready – Designed to support future resolutions for years to
come
 HDCP Compliance Over Fiber – Compatible DXLink Fiber boards transmit uncompressed video, including
HDCP protected content, up to 10 Km at 10 Gbps (single mode fiber options transmit 10 Km, multimode 300
m)
 Fiber Your Way – DXLink Fiber boards are available in single mode or multimode; simplex or duplex
 AV and Control over Twisted Pair, Fiber or Both – Send audio, video, bi-directional control and Ethernet over
twisted pair or fiber cable, or integrate both into the same system
 Embedded NetLinx NX Integrated Control Processor – Allows any connected device to be managed,
monitored or controlled
 Integrated Ethernet Switch – Pass Ethernet through the attached DXLink Twisted Pair or Fiber Transmitters
and Receivers
 Analog to Digital Video Conversion with Scaled Outputs – Converts any source signal to digital and uses
SmartScale Technology to automatically output video that is perfectly scaled for each connected display
 Onboard Web Configuration for all Aspects of the DGX System – Greatly simplifies the setup and
configuration of Enova DGX systems including DXLink endpoints drastically reducing installation time
 Automatic Setup of DXLink Endpoints – Simplified installation by auto-discovering DXLink devices when they
are connected to an Enova DGX
 Single IP Address Required for Multiple Endpoints – Reduces the need for IT administrators to provision
numerous IP addresses across the system for transmitters and receivers
 Unrivaled Network Security - With Dual NIC to isolate AMX or third-party AV equipment from the primary
network, IPv6 and wired 802.1X for protected network access, and user-defined LDAP login group support,
the Enova DGX provides rock-solid security
 Independent Routing of Audio and Video Using Audio Switching Boards – Provides increased flexibility to
combine and separate audio from video in a variety of applications
 AxLink Port – Makes it easier to connect AxLink devices like keypads directly to the Enova DGX
 InstaGate Pro Technology – Easily integrate HDCP into system designs and enjoy hassle-free matrix switching
to all compliant displays. No tools, no delays, and no key constraints – it just works
 SmartScale Technology – Automatically responds to the display's declared EDID information and scales the
video to the best resolution and video parameters for that display without manual setup; this prevents
DGX-3200-ENC | 2








inferior video quality when sources are forced to lower resolutions to support the least capable display in the
system
DXLink Twisted Pair Input and Output Boards – HDCP Compliant boards send audio, video, control, Ethernet
and power over one standard twisted pair cable up to 200 m – 100 m to the matrix switcher and 100 m after
the matrix switcher, see the Cabling for Success with DXLink white paper for more details
Built-in NetLinx NX Integrated Controller – Easily program and manage the entire solution including source
equipment and display devices located across multiple rooms – all from a single point of control
Easily Convert Analog to Digital Signals – Use the Enova DGX Digital Media Switcher in conjunction with
DXLink Multi-Format Transmitters (Twisted Pair or Fiber), and easily integrate legacy analog sources and
automatically convert their signals to digital
Hot Swappable Video Input / Output Boards – Easily add or replace I/O boards at any time after deployment
- the system automatically recognizes the new configuration and activates the boards
3D Support – Pass through latest video formats including 3D and Deep Color
Surround Sound Support – Pass through high definition surround sound including Dolby TrueHD, Dolby
Digital, DTS-HD Master Audio, DTS, and 2-channel through 8-channel L-PCM
High Speed Digital Switching – 26 Gbps* ensures perfect pixel for pixel reproduction of video
Fully Redundant Power Supplies With Independent Power Paths – Ensures maximum reliability for
applications that require 24/7 uptime
*Enclosures manufactured on or after June 1, 2016, those manufactured before that time have a per channel
aggregate data rate of 12.8 Gbps
Specifications
GENERAL
Supported Signal Styles/
Compatible Input and Output Boards
• DGX-I-HDMI, Enova DGX HDMI Input Board (FG1058540)
• DGX-O-HDMI, Enova DGX HDMI Output Board
(FG1058-550)
• DGX-I-DVI, Enova DGX DVI Input Board (FG1058-600)
• DGX-O-DVI, Enova DGX DVI Output Board (FG1058610)
• DGX-I-DXL, Enova DGX DXLink Twisted Pair Input
Board (FG1058-570)
• DGX-O-DXL, Enova DGX DXLink Twisted Pair Output
Board (FG1058-580)
• DGX-I-DXF-MMD, Enova DGX DXLink Multimode
Fiber Input Board, Duplex (FG1058-622)
• DGX-O-DXF-MMD, Enova DGX DXLink Multimode
Fiber Output Board, Duplex (FG1058-632)
• DGX-I-DXF-MMS, Enova DGX DXLink Multimode
Fiber Input Board, Simplex (FG1058-623)
• DGX-O-DXF-MMS, Enova DGX DXLink Multimode
Fiber Output Board, Simplex (FG1058-633)
• DGX-I-DXF-SMD, Enova DGX DXLink Single Mode
Fiber Input Board, Duplex (FG1058-620)
• DGX-O-DXF-SMD, Enova DGX DXLink Single Mode
Fiber Output Board, Duplex (FG1058-630)
• DGX-I-DXF-SMS, Enova DGX DXLink Single Mode
Fiber Input Board, Simplex (FG1058-621)
• DGX-O-DXF-SMS, Enova DGX DXLink Single Mode
Fiber Output Board, Simplex (FG1058-631)
• DGX-AIE, Enova DGX Audio Insert / Extract Board for
Enova DGX 8/16/32/64 (FG1058-705)
• DGX3200-ASB, Enova DGX Audio Switching Board for
Enova DGX 3200 (FG1061-732)
• DGX-I-HDMI-4K, Enova DGX 4K HDMI Input Board
(FG1061-540)
DGX-3200-ENC | 3
• DGX-I-DXL-4K, Enova DGX 4K DXLink Twisted Pair
Input Board (FG1058-570)
• DGX-O-DXL-4K Enova DGX 4K DXLink Twisted Pair
Output Board (FG1061-580)
Dimensions (HWD)
Rack Units
Weight
Regulatory Compliance
MTBF
Recommended Accessories
Per Channel Aggregate Data Rate (Max)
Note: Use fiber duplex models for bidirectional control
over fiber. Simplex models do not support control
transport over fiber; although when used as part of a
complete Enova DGX solution, control can be provided
if a supplemental independent network connection is
used. See the "Instruction Manual – Enova DGX Digital
Media Switchers" for details.
• Without Extractors, With Mounting Ears: 10 1/2" x
19" x 20" (26.54 cm x 48.3 cm x 51 cm)
• With Extractors and Mounting Ears: 10 1/2" x 19" x
21" (26.54 cm x 48.3 cm x 53.54 cm)
6
• Approximately 73 lbs (33.1 kg) per loaded enclosure
• Shipping Weight: Approximately 83 lbs (37.6 kg) per
loaded enclosure
FCC CFR Title 47 Part 15 Subpart B Class A
CE EN 55022 Class A
CE EN 55024
CE EN 60950-1
IEC 60950-1
ICES-003 Class A
UL 60950-1
CSA 60950-1
RoHS
WEEE
92,000 hours
• EXB-IRS4 ICSLan IR/S Interface, 4 IR/S and 4 Inputs
(FG2100-23)
• EXB-COM2 ICSLan Serial Interface, 2 Ports (FG210022)
• EXB-REL8 ICSLan Relay Interface, 8 Channels
(FG2100-20)
• EXB-I/O8 ICSLan Input/Output Interface, 8 Channels
(FG2100-21)
• EXB-MP1 ICSLan Multi-Port, 1 COM, 1 IR/S, 2 I/O, 1
IR RX (FG2100-26)
• CBL-HDMI-FL HDMI High Speed Flat Cable (FG102180-16)
• CBL-RGB+A-FL RGB with Stereo Flat Cable (FG102183-16)
• ENOVADGX-P2-PS, 1200 W Power Supply
Replacement (FG1059-110K)
• FAN REPLACEMENT KIT (FG1060-110K)
• BATTERY REPLACEMENT KIT (FG1060-120K)
Note: Compatible boards are listed above under
"supported signal styles/compatible input and output
boards". Transmitter, Receiver and Digital Switcher
compatibility is dependent on board selection, please
see the data sheet for the selected board for
compatible Transmitters, Receivers and Digital.
26 Gbps*
DGX-3200-ENC | 4
Noise Level
Airflow
*Enclosures manufactured on or after June 1, 2016,
those manufactured before that time have a per
channel aggregate data rate of 12.8 Gbps
< 52.5 dBA @ 1m (Typical @ 25°C)
Forced Air (inlet on sides, exhaust on back & top)
AC POWER REQUIREMENTS
AC Power
Power Capacity (Max)
Power Consumption (Max)
Power Consumption (Typ)
Power Factor Correction
100-240 VAC single phase, 50-60 Hz
• 1320 Watts, with redundancy @ 110 VAC
• 1730 Watts, with redundancy @ 230 VAC
• 2640 Watts, without redundancy @ 110 VAC
• 3459 Watts, without redundancy @ 230 VAC
1692 Watts, fully loaded DXLink Power enclosure
without redundancy
Use the Enova DGX Configuration Tool located at
AMX.com/enova to determine the power
requirements of a configuration and whether any of
the DXLink Twisted Pair Transmitters or Receivers
should be powered with the local power supply to
maintain PS redundancy in the Enova enclosure
585 Watts, fully loaded HDMI enclosure with
redundancy
Supported, Complies with EN60555-2 and EN61000-32TBA
ENVIRONMENTAL
Temperature (Operating)
Temperature (Storage)
Humidity (Operating)
Humidity (Storage)
Heat Dissipation (Typical)
Heat Dissipation (Max)
Heat Dissipation (Max)
32° to 104° F (0° to 40° C)
-22° to +158° F (-30° to +70° C)
5% to 85% RH (non-condensing)
0% to 90% RH (non-condensing)
1998 BTU/hr, fully loaded HDMI enclosure with
redundancy
• 4508 BTU/hr, with redundancy @ 110 VAC
• 5908 BTU/hr, with redundancy @ 230 VAC
• 9016 BTU/hr, without redundancy @ 110 VAC
• 11813 BTU/hr, without redundancy @ 230 VAC
5778 BTU/hr, fully loaded DXLink Power enclosure
without redundancy
Use the Enova DGX Configuration Tool located at
AMX.com/enova to determine the power
requirements of a configuration and whether any of
the DXLink Transmitters or Receivers should be
powered with the local power supply to maintain PS
redundancy in the Enova DGX 32 enclosure
CONTROL PORTS AND INDICATORS
AxLink Port
AxLink Indicator
(1) 4-position 3.5mm Screw Terminal, provides data
and power to external AxLink control devices
(1) AxLink LED (green) indicates the state of the AxLink
portOne 5-position 3.5mm Screw Terminal
DGX-3200-ENC | 5
INTEGRATED CONTROLLER
LAN/Ethernet Port
Processor
Program Port (USB)
ID Pushbutton
Configuration Dip Switch
• (1) RJ-45 Connector, NetLinx On Board Master is an
NX Class Controller
• TCP/IP Uplink Port (LAN 10/100/1000)
• Supports up to 64-Port Unmanaged 10/100 Ethernet
Switch (Cascaded architecture actual throughput
dependent on loading. Worst case per port throughput
10 Mbps, best case 100 Mbps when used with 32
DXLink Transmitters and 32 DXLink Receivers)
• Static IP or DHCP/DNS, SSL, Auto-negotiating,
Half/Full duplex, Auto MDI/MDI-X Cross-Over TCP/IP,
UDP/IP, CIP, SMTP, SNMP, Built-in Web server Includes
support for DXLink Devices
1600 MIPS
USB Mini-AB (used for NetLinx Studio control)
Black ID pushbutton for setting IP mode and reverting
to default configuration and firmware
2-position
USB (HID) KEYBOARD & MOUSE
USB (HID) Keyboard & Mouse
Use the Enova DGX Digital Media Switcher in
conjunction with DXLink Transmitters and Receivers
(twisted pair and/or fiber), connect a DXLink
Transmitter to a PC and a DXLink Receiver to a
keyboard and mouse, the system then emulates
commands from the receiver back to the PC. The
Solecis SDX-510M-DX functions as a DXLink
Transmitter in this scenario. For a list of HID devices
which have been tested and found to be working well
with the latest firmware please view the document:
DXLink HID Keyboard and Mouse Supported Devices
MEMORY
SDRAM
NVRAM
Flash
512 MB
1 MB
8 GB
ENCLOSURE CONTROL
Control Port (Serial)
Control Port (USB)
(1) DB-9 Connector, Bidirectional RS-232, Baud Rates
of 9600 (default), 19200, 38400, 57600
(1) USB Mini-B
DGX-3200-ENC | 6
About AMX by HARMAN
Founded in 1982 and acquired by HARMAN in 2014, AMX® is dedicated to providing AV solutions for an IT World. AMX solves the complexity of
managing technology with reliable, consistent and scalable systems comprising control, video switching and distribution, digital signage and technology
management. AMX systems are deployed worldwide in conference rooms, classrooms, network operation/command centers, homes, hotels,
entertainment venues and broadcast facilities, among others. AMX is part of the HARMAN Professional Group, the only total audio, video, lighting, and
control vendor in the professional AV market. HARMAN designs, manufactures and markets premier audio, video, infotainment and integrated control
solutions for the automotive, consumer and professional markets. Revised 8.30.2016. ©2016 Harman. All rights reserved. Specifications subject to
change.
www.amx.com | +1.469.624.7400 |800.222.0193
DGX-3200-ENC | 7
Download PDF